Getting Runtime Errors...?

I managed to install 7.3 with no problem (also no podcasts) but then came patch Tuesday.
This afternoon I got runtime errors (courtesy of the Microsoft Visual C++ Runtime Library) and iTunes would close.
Uninstalling the .NET Security patch didn't fix it and reinstalling it, in case it had been a bad install, didn't work either.
I installed the 7.3.1 update, more out of curiosity then because I thought it would work (I was going to go back to 7.2 without the patch but what the ****.).
iTunes now works again.
So, if you updated on patch Tuesday and had 7.3 installed and are getting the C++ run time error, update to 7.3.1 .
Hope this works for some of you.

... back a bit sooner than I thought. With at least some of these, a restart of itunes can apparently put things straight:
http://discussions.apple.com/thread.jspa?threadID=1024256&messageID=4931472#4931 472
That's certainly worth a try (or quitting iTunes and restarting the PC prior to relaunching it), prior to more advanced troubleshooting.
(Talking to Pamela and referencing toonz posts ... i'm getting flashbacks to the iTunes 5.0.x days in here ...)

Similar Messages

Getting Runtime Error while Activating Characteristics in BW sandbox system

Hi, i m getting runtime error while activating Characteristics. Error as All InfoObjects Already Saved(locked)
Short Text
SQL error 1691 occurred when accessing program "GP4H8Z73D1WOGH7XBIZ54N5GXEG "
Runtime Errors DBIF_REPO_SQL_ERROR
even if creating a new Characteristics same error is comming.
Key Figures are getting created successfully but problems is comming only with Characteristics. Please Help...
Edited by: kush kumar on Mar 23, 2010 11:56 AM

Hi,
Follow bellow steps:
a) Once check the Lock entries by useing SM13.
Goto SM13--> Select your object lock entries --> Select delete.
b). Acitvate the Infoobject.
Regards.

Getting Runtime error while adding Second page in Smartform.

I added 2 pages in smartform. When I worked with single page. smartform working properly. Now I added one more page(i.e Second page) I am getting runtime error. ("The current ABAP/4 program encountered an unexpected
situation". A RAISE statement in the program "SAPLSTXBC" raised the exception
condition "ERROR".) When I debug this standard program Something width problem getting on line number 110. Both width not matched so program raising exception. Can you please tell me to solve this problem what changes will I do in my smartform?

Please let me know the details of each page.
Error can occur in these cases.
1) You copied the first page to second. and later you change the width of second page
2) You created the second page and there is template in second page. each column width is not matching with the total width of the template.
3) windows width is greater than the page width
Please have a look.
Regards,
Nikhil
Edited by: Nikhil V Kumar on Jul 27, 2010 12:16 PM

In VL02N, getting runtime error "dynpro_msg_in_help" when deleting outbound delivery in production

Hello SD members,
I have an issue in which while executing VL02N and trying to delete the outbound delivery getting runtime error "dynpro_msg_in_help" in production system.
Kindly suggest how to solve this...
Regards
Venkat

Hi Venkata Pradeep,
Can you please proivde more details about an error to understand the issue.
Regards,
Pravin

TS5376 I can not install itunes. I get Runtime Error! R6034. An application has made an attempt to load the c runtime library incorrectly. Please contact the application support team for more information. I've been uninstalling, moving .dll files, re

The other day I was prompted to update itunes. I started to, and it crashed my itunes. Then I tried to uninstall itunes, so that I could turn around and re-install it again. Now I can not install itunes. I get Runtime Error! message. R6034. For the last two hours I have tried deleting itunes, moving the .dll files to the desktop, restarting the computer (more times than I can count), deleting the temp files, updating my internet explorer, using the fix it program,.....
The two messages that I am getting are:
Runtime Error! Program:c\Program Files (x86)\itunes\Tunes.exe R6034 An application has made an attempt to load the c runtime library incorrectly. Please contact the application's support team for more information.
Also: Service to 'Apple Mobile Device' (Apple Moblie Device) failed to start. Verify that you have sufficient priviledges to start system services.

I too was getting the same message regarding R6034. After many frustrating hours I went to the iTunes support page and clicked on "install and update." When that page came up I scrolled on to "removing and reinstalling iTunes......" There they tell you what files need to be removed and what order to do it in so you can reinstall iTunes. My iTunes works now and I didn't lose any music.
About the Apple Mobile Device, well that's one of the files that has to be uninstalled. When you reinstall iTunes the Apple Mobile Device is automatically reinstalled.
Hope this works for you as it did for me. Warning: it takes about an hour to do all this.

TS2570 startup itunes get runtime error R6034 and then not correctly installed ERROR 7 (windows error 1114).

startup itunes get runtime error R6034 and then not correctly installed ERROR 7 (windows error 1114).

ChrisJ4203 wrote:
Use this support document to remove iTunes and reinstall it on the computer. Follow the directions exactly. http://support.apple.com/kb/HT1923
Chris,
This absolutely solved the problem !!!!!!!!!!!!!!!!!!!!! I was having the exact same error messages as Mike.
Thank You for the great fix and I did not lose one song file!!!!!!!!!!!!
G

I am getting runtime error "OBJECTS_OBJREF_NOT_ASSIGNED_NO".

I am getting runtime error "OBJECTS_OBJREF_NOT_ASSIGNED_NO" in transaction RSPC in BW system.

Runtime Errors : OBJECTS_OBJREF_NOT_ASSIGNED_NO
Exception : CX_SY_REF_IS_INITIAL
Short text: Access via 'NULL' object reference not possible.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_RSPC_FRONTEND==============CP" had to be terminated because it has come across a statement that unfortunately cannot be executed.

When i executed this class file i am getting runtime errors

when i executed this class file i am getting runtime errors
code is :
import java.awt.event.*;
import java.awt.*;
public class Test extends Frame
java.awt.Window w;
     TextField t;
     Test()
     t=new TextField(20);
     add(t);
     addWindowListener(new WindowAdapter()
                         public void windowDeactivated(WindowEvent ev)                               {
                              w.toFront();
                              System.out.println("hai");
     setSize(300,300);
     setVisible(true);
public static void main(String args[])
Test t =new Test();
after executing that class i am getting this errors
Exception occurred during event dispatching:
java.lang.NullPointerException:
at WindowEventDemo.windowActivated(WindowEventDemo.java:76)
at java.awt.Window.processWindowEvent(Window.java:612)
at java.awt.Window.processEvent(Window.java:576)
at java.awt.Component.dispatchEventImpl(Compiled Code)
at java.awt.Container.dispatchEventImpl(Compiled Code)
at java.awt.Window.dispatchEventImpl(Compiled Code)
at java.awt.Component.dispatchEvent(Compiled Code)
at java.awt.EventQueue.dispatchEvent(Compiled Code)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:68)
if anybody know how to pls help me

You are using w that you have not done anything with.
Add following code to the begining of your cinstructor:
w = this;
Then it should work.
//Anders ;-D

While installing latest update I lost ability to open Itunes. Getting "runtime error" and then next box says error 1114. Tried uninstalling and reinstalling and does not work. Getting same error. Very frustrating.

Cannot open Itunes after trying to install latest update. Getting runtime error and then error 1114. Tried uninstalling and reinstalling and still getting same error. How do I fix this. Very frustrating!

Hi there,
Earlier iTunes (and supporting applications) need to be completely uninstalled before you can install the new version. Here's the complete Apple info on this: http://support.apple.com/kb/HT1923
Mobile device application will most likely fail to uninstall, so you would need to visit its location(s) and manually delete the files then folder(s). The location of the folders is documented in this link from Apple.
It's a pain, but it should work.

Hollie**it! I can't even open iTunes anymore.I have Windows 7 Home Premium 64 Bit. I tried to update iTunes twice today. This is what I get: Runtime error! Program: C:\Program Files (x86)\iTunes\iTunes.exe R6034 An application has made an

Hollie**it!
I can't even open iTunes anymore.I have Windows 7 Home Premium 64 Bit. I tried to update iTunes Trice Now. This is what I get: Runtime error! Program: C:\Program Files (x86)\iTunes\iTunes.exe. R6034 An application has made an

Hello there, Vinnie.
The following Knowledge Base article addresses the very issue you're describing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Not getting runtime errors

I have been using Flex for 6 months and suddenly this week I
am no longer getting runtime errors which is making it very
dificult to debug. Does anyone know what would cause runtime errors
to be disabled?

Did you turn off "Strict Mode"?

When i am posting the Outbound delivery,here getting Runtime error

Hello
         When i am posting the Outbound delivery,here getting Runtime error
This is error analysis report
Error analysis
    Short text of error message:
    No RFC destination is defined for SAP Global Trade Services
    Long text of error message:
    Technical information about the message:
    Message class....... "/SAPSLL/PLUGINR3"
    Number.............. 002
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
Please give me solution for this

HI,
Probable some missing customising for SAP Global Trade Services - Plug-In.
Check with your functional consultant if the configuration is correct.
Check in SPRO.
Sales and Distribution>Foreign Trade/Customs>SAP Global Trade Services - Plug-In
Regards,
Ankur Parab

When trying to browse itunes store I am still getting runtime error r6025. I know many others are having tjis problem. Any remedies yet?

Still getting Runtime Error R6025 when trying to browse iTunes store. So far iTunes support has been no help. Has anyone solved this problem?

Post this in the iTunes Store forum since it has nothing to do with your iPod nano.
https://discussions.apple.com/community/itunes/itunes_store
B-rock

TS1368 I keep getting runtime error r6025 when searching itunes store

I have tried reinstalling latest download but just get runtime error r6025 and itunes then shuts down

Hi i had that too, dont know why. all i did to fix it was go into control panel, then uninstall programs, then found Itunes on the list. i clicked to uninstall and it then gives you a choice, to uninstall or to change, or to repair. i chose repair and it fired up itunes and repaired it, that was that and it works fine now, try it, good luck.

Getting Runtime error when using HP Simple Pass

Getting Runtime Error and Firefox shutdown when using HP Simple Pass on new HP dm 1165

Try HP support. <br />
http://h30434.www3.hp.com/t5/Operating-systems-and-software/HP-Simple-Pass-Not-working-in-Firefox/m-p/348876

Getting runtime error

hi all
i am getting runtime error in this report can any one help me out.
Include prg is attached down.
REPORT ZVBLOCKED.
INCLUDE ZVBLOCKEDTOP.
REPID = SY-REPID.
PERFORM GET_DATA.
PERFORM APPEND_FIELD.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
    I_CALLBACK_PROGRAM             = REPID.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
    IS_LAYOUT                        = LAYOUT
    IT_FIELDCAT                      = F_VBAK
    I_TABNAME                        = 'IT_VBAK'
    IT_EVENTS                        = F_EVENTS
TABLES
    T_OUTTAB                         = IT_VBAK.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
    IS_LAYOUT                        = LAYOUT
    IT_FIELDCAT                      = F_EKKO
    I_TABNAME                        = 'IT_EKKO'
    IT_EVENTS                        = F_EVENTS
TABLES
    T_OUTTAB                         = IT_EKKO.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
FORM GET_DATA.
SELECT VBELN NETWR FROM VBAK INTO TABLE IT_VBAK WHERE KUNNR IN S_KUNNR.
SELECT EBELN AEDAT FROM EKKO INTO TABLE IT_EKKO WHERE LIFNR IN S_LIFNR.
ENDFORM.
FORM APPEND_FIELD.
FCAT-FIELDNAME = 'VBELN'.
FCAT-TABNAME = 'VBAK'.
FCAT-REF_FIELDNAME = 'VBELN'.
FCAT-REF_TABNAME = 'VBAK'.
APPEND FCAT TO F_VBAK.
FCAT-FIELDNAME = 'NETWR'.
FCAT-TABNAME = 'VBAK'.
FCAT-REF_FIELDNAME = 'NETWR'.
FCAT-REF_TABNAME = 'VBAK'.
APPEND FCAT TO F_VBAK.
FCAT-FIELDNAME = 'EBELN'.
FCAT-TABNAME = 'EKKO'.
FCAT-REF_FIELDNAME = 'EBELN'.
FCAT-REF_TABNAME = 'EKKO'.
APPEND FCAT TO F_EKKO.
FCAT-FIELDNAME = 'AEDAT'.
FCAT-TABNAME = 'EKKO'.
FCAT-REF_FIELDNAME = 'AEDAT'.
FCAT-REF_TABNAME = 'EKKO'.
APPEND FCAT TO F_EKKO.
ENDFORM.
This is include prg.
TABLES: LFA1,EKKO,KNA1,VBAK.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
SELECT-OPTIONS: S_LIFNR FOR LFA1-LIFNR,
S_KUNNR FOR KNA1-KUNNR.
SELECTION-SCREEN END OF BLOCK B1.
TYPES: BEGIN OF TY_VBAK,
VBELN TYPE VBAK-VBELN,
NETWR TYPE VBAK-NETWR,
END OF TY_VBAK.
DATA: WA_VBAK TYPE TY_VBAK,
IT_VBAK TYPE TABLE OF TY_VBAK.
TYPES: BEGIN OF TY_EKKO,
EBELN TYPE EKKO-EBELN,
AEDAT TYPE EKKO-AEDAT,
END OF TY_EKKO.
DATA: WA_EKKO TYPE TY_EKKO,
IT_EKKO TYPE TABLE OF TY_EKKO.
TYPE-POOLS: SLIS.
DATA: REPID LIKE SY-REPID,
FCAT TYPE SLIS_FIELDCAT_ALV,
F_LFA1 TYPE SLIS_T_FIELDCAT_ALV,
F_VBAK TYPE SLIS_T_FIELDCAT_ALV,
F_EKKO TYPE SLIS_T_FIELDCAT_ALV,
LAYOUT TYPE SLIS_LAYOUT_ALV,
F_EVENTS TYPE SLIS_T_FIELDCAT_ALV.

Check the below code, its working fine.
*& Report YSAT_TEST3
REPORT YSAT_TEST3.
type-pools: slis.
TABLES: LFA1,EKKO,KNA1,VBAK.
data: lv_event type slis_alv_event, " add this
      lt_event type slis_t_event.       " add this
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
SELECT-OPTIONS: S_LIFNR FOR LFA1-LIFNR,
S_KUNNR FOR KNA1-KUNNR.
SELECTION-SCREEN END OF BLOCK B1.
TYPES: BEGIN OF TY_VBAK,
VBELN TYPE VBAK-VBELN,
NETWR TYPE VBAK-NETWR,
END OF TY_VBAK.
DATA: WA_VBAK TYPE TY_VBAK,
IT_VBAK TYPE TABLE OF TY_VBAK.
TYPES: BEGIN OF TY_EKKO,
EBELN TYPE EKKO-EBELN,
AEDAT TYPE EKKO-AEDAT,
END OF TY_EKKO.
DATA: WA_EKKO TYPE TY_EKKO,
IT_EKKO TYPE TABLE OF TY_EKKO.
TYPE-POOLS: SLIS.
DATA: REPID LIKE SY-REPID,
FCAT TYPE SLIS_FIELDCAT_ALV,
F_LFA1 TYPE SLIS_T_FIELDCAT_ALV,
F_VBAK TYPE SLIS_T_FIELDCAT_ALV,
F_EKKO TYPE SLIS_T_FIELDCAT_ALV,
LAYOUT TYPE SLIS_LAYOUT_ALV,
F_EVENTS TYPE SLIS_T_FIELDCAT_ALV.
REPID = SY-REPID.
perform it_events.   " add this
PERFORM GET_DATA.
PERFORM APPEND_FIELD.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
I_CALLBACK_PROGRAM = REPID.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
IS_LAYOUT = LAYOUT
IT_FIELDCAT = F_VBAK
I_TABNAME = 'IT_VBAK'
IT_EVENTS = lt_event        " add this
TABLES
T_OUTTAB = IT_VBAK.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
IS_LAYOUT = LAYOUT
IT_FIELDCAT = F_EKKO
I_TABNAME = 'IT_EKKO'
IT_EVENTS = lt_event      " add this
TABLES
T_OUTTAB = IT_EKKO.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
FORM GET_DATA.
SELECT VBELN NETWR FROM VBAK INTO TABLE IT_VBAK WHERE KUNNR IN S_KUNNR.
SELECT EBELN AEDAT FROM EKKO INTO TABLE IT_EKKO WHERE LIFNR IN S_LIFNR.
ENDFORM.
FORM APPEND_FIELD.
FCAT-FIELDNAME = 'VBELN'.
FCAT-TABNAME = 'VBAK'.
FCAT-REF_FIELDNAME = 'VBELN'.
FCAT-REF_TABNAME = 'VBAK'.
APPEND FCAT TO F_VBAK.
FCAT-FIELDNAME = 'NETWR'.
FCAT-TABNAME = 'VBAK'.
FCAT-REF_FIELDNAME = 'NETWR'.
FCAT-REF_TABNAME = 'VBAK'.
APPEND FCAT TO F_VBAK.
FCAT-FIELDNAME = 'EBELN'.
FCAT-TABNAME = 'EKKO'.
FCAT-REF_FIELDNAME = 'EBELN'.
FCAT-REF_TABNAME = 'EKKO'.
APPEND FCAT TO F_EKKO.
FCAT-FIELDNAME = 'AEDAT'.
FCAT-TABNAME = 'EKKO'.
FCAT-REF_FIELDNAME = 'AEDAT'.
FCAT-REF_TABNAME = 'EKKO'.
APPEND FCAT TO F_EKKO.
ENDFORM.
*&      Form IT_EVENTS
*       text
* --> p1        text
* <-- p2        text
FORM IT_EVENTS .                         " add this
refresh lt_event.
clear lv_event.
lv_event-name = slis_ev_top_of_list.
lv_event-form = 'LIST_HEADER'.
append lv_event to lt_event.
clear lv_event.
lv_event-name = slis_ev_top_of_page.
lv_event-form = 'VERIFIC_HEADER'.
append lv_event to lt_event.
ENDFORM.                    " IT_EVENTS
Thanks
Satyasuresh Donepudi
Edited by: Satya suresh Donepudi on Apr 29, 2009 9:04 AM

Getting Runtime Errors...?

Similar Messages

Maybe you are looking for