Getting serial number box while transfer post in MB1A but not while doing MIGO

Hi Team
I am getting serial number box while transfer post in MB1A.
But getting below error under serial number tab while doing GR through MIGO of outbound delivery.
Issuing plant and receiving plant, material, batch, qty are same in both cases.
How can I get serial number box when doing GR? Does any customizing changes needed?
Br, Kiran U

Movement type is different for those two screen shots, also you are saying you are using MB1A, but you are using 301 movement type. Generally 301 movement type is not allowed from MB1A t-code.
Please check these SAP notes if relevant for your case.
856548 - MIGO: you cannot enter serial numbers
856662 - T156Q: Missing entries

Similar Messages

I bought adobe Photoshop CC but didnt get serial number or verification email, whats the problem?

i bought adobe Photoshop CC but didnt get serial number or verification email, whats the problem?

Hello Nikoloz,
first of all you should have a look there: https://www.adobe.com/account.html >>> see My productsView all >>> These registered products are associated with your Adobe ID. >>> Name >>> Serial number
If not successful use http://helpx.adobe.com/x-productkb/global/find-serial-number.html >> see comments
On the other hand: Did you purchase your product from these firms like Amazon? If yes, this is not a serial number, only a code with which you can request a serial number from Adobe. Please have a look at http://helpx.adobe.com/x-productkb/global/find-serial-number.html. (Start here: How did you purchase your product?)
The following part, so I just see at least, ceased to exist on my Adobe website, everything takes place in the link from above. I leave it as an info yet, it might still fit for you. For this purpose, please click your way through to your Adobe Store and find the button "Get Serial Number". Fill in the form and after a while you will get the real serial number.
Good luck!
Hans-Günter

Invalid redemption code problem to get serial number

Bought adobe premiere elements 13. Got to retrieve serial number by entering redemption code. 24 letters and numbers. I did every way, case sensitive and not, and even the 0 with a line through it, an O or number 0? Tried both. Still all ways "invalid." What now?

Hello Scotty,
did you use the steps from there? >>> Redemption Code Help
Another way, If you purchased your product from these firms like Amazon, you get this code with which you can request a serial number from Adobe. Please have a look at http://helpx.adobe.com/x-productkb/global/find-serial-number.html. (Start here: How did you purchase your product?)
The following part, so I just see at least, ceased to exist on my Adobe website, everything takes place in the link from above. I leave it as an info yet, it might still fit for you. For this purpose, please click your way through to your Adobe Store and find the button "Get Serial Number". Fill in the form and after a while you will get the real serial number.
Hans-Günter

MIGO( (good receipt,Transfer pos how to to get serial number at run time

Hi Experrts:-
I need to change the status of serial number (equipment number ) during Migo (good receipt,Transfer posting).
I have checked all the user exits and number of badis but i am not getting serial number at run time if i get serial numbar
in exit od badi i will change the status
I have used following badi:-
MB_DOCUMENT_BADI
MB_MIGO_ITEM_BAdI
Thanks

Hi Dilip,
If I am correct you are taking about changing user Status at device level (serial number)
you can set the user status through status profile (Tcode OIBS for particular status profile).
within this, you can also set/ change the status, if particular business transaction is executed (for e.g. good receipt, Stock transfer)
Please check if you are using status profile in your case, if not create one, by this way i think you can able to map the requirement.
Regards,
Chetan

I bought Photoshop Elements 12 (box - CD) and threw away the box. I thought the serial number would be on the disc sleeve, but it was not. Now I can´t register the product. Is there something I can do to get the number/code to activate Photoshop Elements?

I bought Photoshop Elements 12 (box - CD) and threw away the box. I thought the serial number would be on the disc sleeve, but it was not. Now I can´t register the product. Is there something I can do to get the number/code to activate Photoshop Elements? Thank you.

My guess is that you won't be able to do much if you threw away the serial number before using it. The serial number will not have been externally visible on the box though... doing that would make it available for use by anyone who sees the box in any store.
To locate the serial number:
http://helpx.adobe.com/x-productkb/global/find-serial-number.html
If you remain unable to locate the serial number you might need to head back to wherever you purchased the product to confirm whether or not you might have thrown out the serial number or if it could even possibly have never been provided.
Beyond that you need to resolve serial number issues with ASdobe Support directly. Here is a link for chat:
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Missing half redemption number to get serial number in box. what can i do?

missing redemption number for getting serial number in box only had half of the number . how do i correct this?

Contact the seller.

I purchased Adobe Photoshop Elements 12. Logged in and can not get serial number. Says it is incorrect. Going in circles.

Can't get serial number for Photoshop Elements. I'm logged in. I have a redemption code and also codes on the back of the box. nothing works and am running in circles. I want to install and use it and can't because I can't get the correct serial number. On the front of the box it says use the card (with redemptiom code to receive the serial number.HELP!!!

Dear Brian,
I activated my product in August of 2014. I had it a few months, October, when my computer crashed. Therefore I had to go back to Adobe tell them what happened, and then until December I had noticed that it said that I had a trial copy. I was not worried, as I had the serial number. it was working, but in January I got a message that my "trial" copy had expired.
At that time I had contacted Adobe and was told that because it was beyond the 3 months, they would no longer help me.
Therefore, at one point, when the computer crashed, I had not deactivated the program. But Adobe had gotten it working for me again.
I do not know what happened between October and December to have changed the software from a real copy to a trial copy.
Now to your patient questions.
As you wrote, that is what happens to the point of getting the trial copy, but when I follow the process through, I get a message that my "trial copy has expired". When I go the the editor, the whole process loops again, sign in, trial copy, licence page, add serial number, then the message that the trial has expired.
When I got that message the first few times months ago, I went back to the Adobe web site and downloaded another copy. (I have done this numerous times) It still said that I had a trial copy and that it had expired, there is a box to licence this software, when I click that, I have to sign in again, This time I also had gone to the Adobe web site signed in and left it open, while I put in the serial number, hoping that would help (have also tried that before). It waits and then the Editor/Organized box comes up again. When I go to the Editor, it tells me that this is a trial copy which has expired and it starts all over again.
I was so frustrated, that I waited a couple of months to try it again. The thinking was that there was some glitch that would work it self out and I could again down load a clean copy of the original, not a trial. (I do not know how I keep getting a trial copy of PSE 12, as it is not even offered on the site.)
The crazy thing is this morning when I turned on my computer, I had an update for the Adobe PSE 12 and Camera Raw. Probably because I had downloaded a copy again.
When I go the the web site to down load a copy of the PSE !2, I am doing it from the My accounts/ products page and downloads. I have left the web page open to copy the serial number from that page, although it always matches my notes.
ThanksT

HT4061 I'm stolen my iPhone 4 how I will get serial number

Please help me to get serial number of my iPhone 4

This should also apply to iPhones.
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
 Cheers, Tom
You posted in the iPad forum instead of the iPhone forum. I'll request that Apple move your post.

MIGO user exit to get serial number

Hi Experrts:-
I need to change the status of serial number (equipment number ) during Migo (good receipt,Transfer posting).
I have checked all the user exits and number of badis but i am not getting serial number at run time if i get serial numbar
in exit od badi i will change the status
I have used following badi:-
MB_DOCUMENT_BADI
MB_MIGO_ITEM_BAdI
Thanks

Hi ,
m also using GET_SERNOS_OF_DOCUMENT
but not getting serial number.
need to get serial number in MIGO.
how to pass parameters to this fm.
KEYDATA-TASER = 'SER03' "Goods mvmnt
KEYDATA-SDAUFNR = ??
KEYDATA-POSNR   =   ??
CALL FUNCTION 'GET_SERNOS_OF_DOCUMENT'
   EXPORTING
     KEY_DATA                  =
TABLES
   SERNOS                    =
EXCEPTIONS
   KEY_PARAMETER_ERROR       = 1
   NO_SUPPORTED_ACCESS       = 2
   NO_DATA_FOUND             = 3
   OTHERS                    = 4
please guide..

Get serial number of ACS 38 CCID smart card reader to identify it.

I m working over native card , and for security i want to get the special feature of smart card reader (serial number or anything) to make it distinguish with other reader. I am using ACS 38 CCID reader.
what i did to find this-
1- in Winscard.h , there are a function with name - SCardGetAttribute() , when i am using this for getting serial number , it is showing error like- Error 0x00000032 :- the request is not supported. while it is giving serial number when i am using other reader - SCM Microsystems Inc.
2- when i go for registry ,
HKLM\SYSTEM\CURRENT CONTROL SET\SERVICES\A38CCID\ENUM . i found there a
string - usb\vid_072f&Pid_90cc\5&3873a573&0&2 (Device Instance Id) but for number of reader ,its similar. so here i am fail again.
Is there any way to get this or i need to consult with manufacture?
I already use javax.smartcardio.*; is there any function to get the detail of reader connected????

I'd bet my last Euro it's the second FRU you mentioned, 04W1637, because all FRUs, and all Lenovo MTMs and order numbers that I have ever seen consist of 7 digits or letters, this was so in the IBM days and has been the case ever since.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

MIGO to get serial number at run time

Hi Experrts:-
I need to change the status of serial number (equipment number ) during Migo (good receipt,Transfer posting).
I have checked all the user exits and number of badis but i am not getting serial number at run time if i get serial numbar
in exit od badi i will change the status
I have used following badi:-
MB_DOCUMENT_BADI
MB_MIGO_ITEM_BAdI
Thanks

Depending on your needs, you need to put below code in a different UserExit or BAdI :
types: begin of ty_s_goserial,         "Cfr. INCLUDE 'LMIGOKE1' for 'trx. MIGO
          selected type xfeld,
          serialno type gernr,
          uii type uii_char72,
          subrk type xfeld,
        end of ty_s_goserial.
data: lt_goserial type standard table of ty_s_goserial with non-unique default key.
data: ls_goserial like line of lt_goserial value is initial.
field-symbols: <fs_goserial> like lt_goserial. "type goserial.
unassign <fs_goserial>.
"Get the SERIALNOs via trx.MIGO-itabs ('GOSERIAL')
assign ('(SAPLMIGO)OREF_DETAIL->T_GOSERIAL') to <fs_goserial>.
loop at <fs_goserial> into ls_goserial.
"do your checks or whatever ...
endloop.
Check the possible 'enhancement points' via break-point in the "CL_EXITHANDLER"-class, method 'GET_INSTANCE' code-line 28 (SY-SUBRC) when running trx. "MIGO". As you can clearly see, this is only applicable when running trx.'MIGO'.

Purchased and downloaded/installed Captivate 7 but get 'serial number valid but' error

Purchased and downloaded/installed Captivate 7 but get 'serial number valid but a qualifying product could not be found on this computer' error. I have checked serial number, checked that I purchased correct version (7) direct and not an upgrade but the drop down list tha tthe window shows is only previous 6 versions and it is 7 I purchased/installed and is opening.

Captivate thinks you bought an upgrade. Adobe Support will have to help you.
I went through this (with an upgrade) but my qualifying product was also an upgrade, and Adobe didn't list my original product (CP2). So there was no way to put in all the info.
And, just FYI, keep that serial number handy. Even after Adobe Support fixed my Captivate so that it will run, every once in awhile...for no apparent reason...Captivate will start in "trial" mode and I have to re-enter the serial number. It always works after I do that. But, it's a pain so I now keep the serial number posted on my bulletin board for handy reference.
Rebecca

User Exit for "Serial Number" in VL02N before "Post Goods Issue".

Hi Friends,
Current Scenario:
End User has to scan "Serial Number" for Main Unit (Item CAtegory - TAN) while doing "Outbound Delivery". But, sometimes he forget to do this activity of scanning "Serial Number". And do "Post Goods Issue" without "Serial Number".
Requirement:
When End user will click "Post Goods Issue", system should first check "Serial Number" for Main Unit (Item Category - TAN). If he will not find "Serial Number" then system should give warning message for "Serial Number".
Please suggest the suitable "User Exit" that can be used for above purpose.
Or if there is any other way then let us know.
Regards
Siva

hi
check is there any standard User Exit available for VL02N. apply your logic and activate

How do i get serial number of iphone 3g from itunes

how do i get serial number of iphone 3g from itunes- i am unable to retrieve it from any other source

Finding serial number for a device - https://discussions.apple.com/message/18246553 - from box or backup file, not from Apple.
http://support.apple.com/kb/HT2526 - You can use My Support Profile to find a list of serial numbers that have been purchased or registered with your Apple ID.
My Support Profile - https://supportprofile.apple.com/MySupportProfile.do

HT4061 How do I unlock my iPad? Unable to get serial number since I can't open iPad to get serial number to get help fixing problem.

How do I unlock my iPad? Unable to get serial number since I can't open iPad to get serial number to get help fixing problem.

What do you need the serial number for to unlock the iPad? If the iPad is locked because you forgot the Passcode, you have to restore the device.
What are you trying to unlock?
Your serial number is written on the back of the iPad and on the box that the iPad came in.

Getting serial number box while transfer post in MB1A but not while doing MIGO

Similar Messages

Maybe you are looking for