Getting sfx to play in GB from yamaha dgx 220

I would love for GB to play the built in sound effects from my yamaha 220 but instead, it just recognizes the pressed key as a piano sound. any suggestions???

is it a DGX-220 or PSR-220? My PSR has an OUTPUT on the back (to run to an amp) - simply run a standard guitar type cable (1/4" jacks) from the OUTPUT on your keyboard into your Mac's LINE IN (using a cheap Radio Shack 1/4" -> 1/8" mini adapter) and you can use the built-in sounds this way... Set it up as a REAL INSTRUMENT. Be sure to turn MONITOR on so you can hear yourself
Message was edited by: strangedogs

Similar Messages

  • Yamaha Dgx 220 iPad help

    Hello everyone,
    Last week after graduation, my aunt gave me the new iPad, which I love very much. I am currently using it to work on a movie project for a scholarship, and I'm using GarageBand for the audio. I wanted to use my Yamaha DGX 220 to record the instrumental. I first tried to record but as you may have guessed it turned out very badly. I then tried to use the Apple camera connection kit to connect the Yamaha keyboard to my iPad. Unfortunately I received the message that this USB device is not supported. I tried to look online for a solution but I could not find one for the iPad. For macs, it was suggested that an intermediary box of some kind be used. Would this work for the iPad? I would hate to go out and buy unnecessary hardware.
    Thank you all in advance for your help,
    -M65

    is it a DGX-220 or PSR-220? My PSR has an OUTPUT on the back (to run to an amp) - simply run a standard guitar type cable (1/4" jacks) from the OUTPUT on your keyboard into your Mac's LINE IN (using a cheap Radio Shack 1/4" -> 1/8" mini adapter) and you can use the built-in sounds this way... Set it up as a REAL INSTRUMENT. Be sure to turn MONITOR on so you can hear yourself
    Message was edited by: strangedogs

  • Can't get iPad to play iTunes Library from LaCie Fuel

    Hi All,
    First time poster here so I hope I'm posting in the right section!
    I bought a Lacie Fuel specifically for my husband to be able to access our iTunes library when he's off working at remote sites for weeks on end. I followed all the instructions on how to copy the library to the drive and install the Seagate media app on the iPad. The app recognises the library and all the media files - even the artwork - but when we go to play something, it opens a internet browser screen, says it's loading then just comes up with a grey strip across the screen and a 'play' arrow... however it will not play no matter what you do from this point.
    IVe spoken extensively with LaCie support and they've exhausted all their options in trying to assist me. They eventually told me to speak to Apple as they can only assume it's an iTunes/iTunes Store permissions issue. Apple fobbed me off saying it's not their hardware so not their problem.
    Apparently this device works fine for 'everyone' else!
    So the facts are as below;
    * any file that is in the library but not bought from the iTunes Store plays through the iPad fine.
    * I ensured I copied the entire iTunes library and all associated files across to the LaCie Fuel - I.e: not just the actual movies and TV files themselves. I was careful about this as I'm gathering the permissions would be tied into files associated with the library somehow?
    * my iTunes Library is stored on an external hard drive but still works fine through iTunes on the Mac Desktop and our various Apple TV's.
    * the Mac desktop is running OSX 10.9.5 and iPad mini (brand new as of a month ago) is running the latest software. iTunes is 12.1.0.50. The Seagate App is also the latest version.
    Has anyone else had the problem? I'm so frustrated at having spent so much money on this - and disappointed my husband so much as it was the perfect solution for him - only to be unable to get it to work!

    Unfortunately I don't have first hand experience with the Lacie device but reading your question you said you installed the Seagate media app. I checked the App Store and there is also a LaCie app by Seagate. Check also the link below. I,m going to ask the hosts to move your question to the iPad Forum, hopefully someone has an answer for you.
    LaCie Media by Seagate Technology https://appsto.re/us/XWzOZ.i
    https://www.lacie.com/us/products/product.htm?id=10618

  • How can I get itunes to play one album from start to finish, especially when there are different artists on it?

    How can I get itunes just to play albums from beginning to end? Often if an artist has a guest artist, or there are 'various artists' on the album, it stores them all separately, so listening from beginning to end becomes not one click away, but a multitude of clicks away just to make a play list which returns the album to its original state. Why can't Apple do this as a default?

    If your music is sorted by "Albums", even a compilation is a single click.
    'various artists' on the album, it stores them all separately,
    That happens when you sort your music by "Artist".

  • Call gets disconnected after playing the menu from CVP

    Hello,
    When I make a call, the call is going to the ICM and then it is coming to the Call server then to the VXML gateway and then it goes to the VXML server and plays the promt.
    The problem i am facing is that once the menu audio is played the call gets disconnected.  It doesnt let me choose any options. I feel it is not able to identify the my inputs
    I have some debug outputs
    Mar  1 01:09:03.095: //-1/C113522D805A/CCAPI/cc_api_display_ie_subfields:
       cc_api_call_setup_ind_common:
       cisco-username=1000
       ----- ccCallInfo IE subfields -----
       cisco-ani=sip:[email protected]:5060
       cisco-anitype=0
       cisco-aniplan=0
       cisco-anipi=0
       cisco-anisi=1
       dest=sip:[email protected];transport=udp
       cisco-desttype=0
       cisco-destplan=0
       cisco-rdie=FFFFFFFF
       cisco-rdn=
       cisco-rdntype=0
       cisco-rdnplan=0
       cisco-rdnpi=-1
       cisco-rdnsi=-1
       cisco-redirectreason=-1   fwd_final_type =0
       final_redirectNumber =
       hunt_group_timeout =0
    *Mar  1 01:09:03.103: //-1/C113522D805A/CCAPI/cc_api_call_setup_ind_common:
       Interface=0x67213130, Call Info(
       Calling Number=sip:[email protected]:5060,(Calling Name=)(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed),
       Called Number=sip:[email protected];transport=udp(TON=Unknown, NPI=Unknown),
       Calling Translated=FALSE, Subscriber Type Str=Un
    R1#known, FinalDestinationFlag=TRUE,
       Incoming Dial-peer=811, Progress Indication=NULL(0), Calling IE Present=TRUE,
       Source Trkgrp Route Label=, Target Trkgrp Route Label=, CLID Transparent=FALSE), Call Id=65
    *Mar  1 01:09:03.103: //-1/C113522D805A/CCAPI/ccCheckClipClir:
       In: Calling Number=sip:[email protected]:5060(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed)
    *Mar  1 01:09:03.103: //-1/C113522D805A/CCAPI/ccCheckClipClir:
       Out: Calling Number=sip:[email protected]:5060(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed)
    *Mar  1 01:09:03.103: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    *Mar  1 01:09:03.103: :cc_get_feature_vsa malloc success
    *Mar  1 01:09:03.103: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    *Mar  1 01:09:03.103:  cc_get_feature_vsa count is 1
    *Mar  1 01:09:03.103: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
    *Mar  1 01:09:03.103: :FEATURE_VSA attributes are: feature_name:0,feature_time:1732532552,feature_id:23
    *Mar  1 01:09:03.103: //65/C113522D805A/CCAPI/cc_api_call_setup_ind_common:
       Set Up Event Sent;
       Call Info(Calling Number=(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed),
       Called Number=(TON=Unknown, NPI=Unknown))
    *Mar  1 01:09:03.111: //65/C113522D805A/CCAPI/cc_process_call_setup_ind:
       Event=0x67452800
    *Mar  1 01:09:03.119: //65/C113522D805A/CCAPI/ccCallSetContext:
       Context=0x65097114
    *Mar  1 01:09:03.119: //65/C113522D805A/CCAPI/cc_process_call_setup_ind:
       >>>>CCAPI handed cid 65 with tag 811 to app "_ManagedAppProcess_bootstrap"
    *Mar  1 01:09:03.143: //65/C113522D805A/CCAPI/ccCallProceeding:
       Progress Indication=NULL(0)
    *Mar  1 01:09:03.147: //65/C113522D805A/CCAPI/ccCallConnect:
       Progress Indication=NULL(0), Data Bitmask=0x0
    *Mar  1 01:09:03.151: //65/C113522D805A/CCAPI/ccCallConnect:
       Call Entry(Connected=TRUE, Responsed=TRUE)
    *Mar  1 01:09:03.239: //65/C113522D805A/CCAPI/cc_api_event_indication:
       Event=141, Call Id=65
    *Mar  1 01:09:03.243: //65/C113522D805A/CCAPI/cc_api_event_indication:
       Event Is Sent To Conferenced SPI(s) Directly
    *Mar  1 01:09:03.243: //65/C113522D805A/CCAPI/cc_api_caps_ind:
       Destination Interface=0x0, Destination Call Id=-1, Source Call Id=65,
       Caps(Codec=0x0, Fax Rate=0x2, Vad=0x2,
       Modem=0x0, Codec Bytes=20, Signal Type=2)
    *Mar  1 01:09:03.243: //65/C113522D805A/CCAPI/cc_api_caps_ind:
       Caps(Playout Mode=1, Playout Initial=60(ms), Playout Min=40(ms),
       Playout Max=250(ms), Fax Nom=300(ms))
    *Mar  1 01:09:04.163: //65/C113522D805A/CCAPI/ccCallHandoff:
       Silent=FALSE, Application=0x6773AB4C, Conference Id=0xFFFFFFFF
    *Mar  1 01:09:04.295: //65/C113522D805A/CCAPI/ccSetDigitTimeouts:
       Initial Digit Timeout=0(ms), Inter Digit Timeout=0(ms)
    *Mar  1 01:09:04.295: //65/C113522D805A/CCAPI/ccSetDigitTimeouts:
       Call Entry(Inter Digit Timeout=0(ms), Initial Digit Timeout=0(ms))
    *Mar  1 01:09:04.295: //65/xxxxxxxxxxxx/CCAPI/ccCallReportDigits:
       (callID=0x41, digit_event=0x1, enable=TRUE, consume=FALSE)
    *Mar  1 01:09:04.299: //65/C113522D805A/CCAPI/ccCallReportDigits:
       Enabled=TRUE, Call Id=65
    *Mar  1 01:09:04.303: //65/xxxxxxxxxxxx/CCAPI/cc_api_call_report_digits_done:
       (vdbPtr=0x67213130, callID=0x41, disp=-4, digit_event=0x1, enable=TRUE, consume=FALSE)
    *Mar  1 01:09:04.307: //65/C113522D805A/CCAPI/cc_api_call_report_digits_done:
       Enabled=TRUE, Disposition=0xFFFFFFFC, Interface=0x67213130, Call Id=65
    *Mar  1 01:09:04.311: //65/C113522D805A/CCAPI/cc_api_call_report_digits_done:
       Call Entry(Initial Digit Timeout=0(ms), Inter Digit Timeout=0(ms))
    *Mar  1 01:09:05.291: //65/C113522D805A/CCAPI/ccAssociateStream:
       Coder=5, DTMF Relay=4, Vad=0,
       Record Function=0x0, Event Queue=0x66954714, Stream Context=678B0364,
       Record Context=0x0, Stream Call Id=66, Call Id=65
    *Mar  1 01:09:05.295: //65/C113522D805A/CCAPI/ccAssociateStream:
       Call Entry(Stream Status=2, Digit Enable=TRUE)
    *Mar  1 01:09:05.327: //65/C113522D805A/CCAPI/cc_api_call_associated:
       Interface=0x0, CallId=65, Disposition=0
       Play Function=0x62C2DFA8, Codec=0x5, Vad=0x0
       Media Type=0x3, SPI Context=0x678D2480, Stream CallId=66
       TX Dynamic Pt=0x0, RX Dynamic Pt=0x0
    *Mar  1 01:09:05.531: //65/C113522D805A/CCAPI/ccSetDigitTimeouts:
       Initial Digit Timeout=5000(ms), Inter Digit Timeout=10000(ms)
    *Mar  1 01:09:05.535: //65/C113522D805A/CCAPI/ccSetDigitTimeouts:
       Call Entry(Inter Digit Timeout=10000(ms), Initial Digit Timeout=5000(ms))
    *Mar  1 01:09:05.535: //65/xxxxxxxxxxxx/CCAPI/ccCallReportDigits:
       (callID=0x41, digit_event=0x1, enable=TRUE, consume=FALSE)
    *Mar  1 01:09:05.535: //65/C113522D805A/CCAPI/ccCallReportDigits:
       Enabled=TRUE, Call Id=65
    *Mar  1 01:09:05.535: //65/xxxxxxxxxxxx/CCAPI/cc_api_call_report_digits_done:
       (vdbPtr=0x67213130, callID=0x41, disp=-4, digit_event=0x1, enable=TRUE, consume=FALSE)
    *Mar  1 01:09:05.539: //65/C113522D805A/CCAPI/cc_api_call_report_digits_done:
       Enabled=TRUE, Disposition=0xFFFFFFFC, Interface=0x67213130, Call Id=65
    *Mar  1 01:09:05.543: //65/C113522D805A/CCAPI/cc_api_call_report_digits_done:
       Call Entry(Initial Digit Timeout=5000(ms), Inter Digit Timeout=10000(ms))
    *Mar  1 01:09:08.723: //65/C113522D805A/CCAPI/ccDisassociateStream:
       Record Context=0x0, Stream Call Id=66, Call Id=65
    *Mar  1 01:09:08.723: //65/C113522D805A/CCAPI/ccDisassociateStream:
       Call Entry(Stream Status=1, Digit Enable=TRUE)
    *Mar  1 01:09:08.735: //65/C113522D805A/CCAPI/ccAssociateStream:
       Coder=5, DTMF Relay=4, Vad=0,
       Record Function=0x0, Event Queue=0x66954714, Stream Context=678B0364,
       Record Context=0x0, Stream Call Id=66, Call Id=65
    *Mar  1 01:09:08.739: //65/C113522D805A/CCAPI/ccAssociateStream:
       Call Entry(Stream Status=2, Digit Enable=TRUE)
    *Mar  1 01:09:08.747: //65/C113522D805A/CCAPI/cc_api_call_associated:
       Interface=0x0, CallId=65, Disposition=0
       Play Function=0x62C2DFA8, Codec=0x5, Vad=0x0
       Media Type=0x3, SPI Context=0x678D2480, Stream CallId=66
       TX Dynamic Pt=0x0, RX Dynamic Pt=0x0
    R1#
    R1#
    *Mar  1 01:09:16.143: //65/C113522D805A/CCAPI/ccDisassociateStream:
       Record Context=0x0, Stream Call Id=66, Call Id=65
    *Mar  1 01:09:16.143: //65/C113522D805A/CCAPI/ccDisassociateStream:
       Call Entry(Stream Status=1, Digit Enable=TRUE)
    *Mar  1 01:09:16.175: //65/C113522D805A/CCAPI/ccCallDisconnect:
       Cause Value=16, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=0)
    *Mar  1 01:09:16.179: //65/C113522D805A/CCAPI/ccCallDisconnect:
       Cause Value=16, Call Entry(Responsed=TRUE, Cause Value=16)
    *Mar  1 01:09:16.227: //65/C113522D805A/CCAPI/cc_api_call_disconnect_done:
    R1#Disposition=0, Interface=0x67213130, Tag=0x0, Call Id=65,
       Call Entry(Disconnect Cause=16, Voice Class Cause Code=0, Retry Count=0)
    *Mar  1 01:09:16.235: //65/C113522D805A/CCAPI/cc_api_call_disconnect_done:
       Call Disconnect Event Sent
    *Mar  1 01:09:16.235: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
    *Mar  1 01:09:16.235: :cc_free_feature_vsa freeing 67445940
    *Mar  1 01:09:16.235: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
    *Mar  1 01:09:16.235:  vsacount in free is 0
    I have some  basic VXML gateway configuration
    R1#show run
    Building configuration...
    Current configuration : 2588 bytes
    version 12.4
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname R1
    boot-start-marker
    boot-end-marker
    no aaa new-model
    memory-size iomem 5
    ip cef
    no ip domain lookup
    ip domain name lab.local
    ip auth-proxy max-nodata-conns 3
    ip admission max-nodata-conns 3
    multilink bundle-name authenticated
    voice service voip
    sip
      header-passing
    application
      service cvperror flash:cvperror.tcl
      paramspace english index 0
      paramspace english language en
      paramspace english location flash
      paramspace english prefix en
      service new-call flash:bootstrap.vxml
      paramspace english index 0
      paramspace english language en
      paramspace english location flash
      paramspace english prefix en
      service ringtone flash:ringtone.tcl
      paramspace english language en
      paramspace english index 0
      paramspace english location flash
      paramspace english prefix en
      service ringback flash:ringtone.tcl
      service handoff flash:handoff.tcl
      paramspace english index 0
      paramspace english language en
      paramspace english location flash
      paramspace english prefix en
      service bootstrap flash:bootstrap.tcl
      paramspace english index 0
      paramspace english language en
      paramspace english location flash
      paramspace english prefix en
    archive
    log config
      hidekeys
    interface FastEthernet0/0
    ip address 192.168.1.253 255.255.255.0
    duplex auto
    speed auto
    interface FastEthernet0/1
    no ip address
    shutdown
    duplex auto
    speed auto
    ip forward-protocol nd
    no ip http server
    no ip http secure-server
    control-plane
    dial-peer voice 9191 voip
    service ringtone
    session protocol sipv2
    incoming called-number 91919191
    codec g711ulaw
    no vad
    dial-peer voice 9292 voip
    service cvperror
    session protocol sipv2
    incoming called-number 92929292
    codec g711ulaw
    no vad
    dial-peer voice 1503 voip
    destination-pattern 1503
    session protocol sipv2
    session target ipv4:192.168.1.57
    dtmf-relay rtp-nte h245-alphanumeric h245-signal
    codec g711ulaw
    ip qos dscp cs3 signaling
    no vad
    dial-peer voice 100 voip
    destination-pattern 10..
    session target ipv4:192.168.1.100
    dial-peer voice 811 voip
    service bootstrap
    session protocol sipv2
    session target sip-server
    incoming called-number 81T
    codec g711ulaw
    no vad
    line con 0
    exec-timeout 0 0
    privilege level 15
    logging synchronous
    line aux 0
    exec-timeout 0 0
    privilege level 15
    logging synchronous
    line vty 0 4
    login
    end
    Please help me out how o fix this issue/

    Thanks for the respose
    The microapp what I use is user.microapp.ToExtVXML[]
    This is the activity log in the CVP application. I dont see any error logs.
    192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.109,,start,newcall,
    192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.109,,start,ani,NA
    192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.109,,start,areacode,NA
    192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.109,,start,exchange,NA
    192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.109,,start,dnis,NA
    192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.109,,start,uui,NA
    192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.109,,start,iidigits,NA
    192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.125,CVP Subdialog Start_01,enter,
    192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.593,CVP Subdialog Start_01,exit,done
    192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.593,Greetings,enter,
    192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.597,Greetings,interaction,audio_group,initial_audio_group
    192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.703,Greetings,exit,done
    192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.703,Menu,enter,
    192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.707,Menu,interaction,audio_group,initial_audio_group
    192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.875,Menu,exit,
    192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.875,,end,how,hangup
    192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.875,,end,result,normal
    192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.875,,end,duration,1
    192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:06.531,,start,newcall,
    192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:06.531,,start,ani,NA
    192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:06.531,,start,areacode,NA
    192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:06.531,,start,exchange,NA
    192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:06.531,,start,dnis,NA
    192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:06.531,,start,uui,NA
    192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:06.531,,start,iidigits,NA
    192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:06.531,CVP Subdialog Start_01,enter,
    192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:06.921,CVP Subdialog Start_01,exit,done
    192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:06.921,Greetings,enter,
    192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:06.957,Greetings,interaction,audio_group,initial_audio_group
    192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:07.109,Greetings,exit,done
    192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:07.109,Menu,enter,
    192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:50:25.718,,end,how,app_session_complete
    192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:50:25.718,,end,result,timeout
    192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:50:25.718,,end,duration,1819
    192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.312,,start,newcall,
    192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.312,,start,ani,NA
    192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.312,,start,areacode,NA
    192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.312,,start,exchange,NA
    192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.312,,start,dnis,NA
    192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.312,,start,uui,NA
    192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.312,,start,iidigits,NA
    192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.312,CVP Subdialog Start_01,enter,
    192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.750,CVP Subdialog Start_01,exit,done
    192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.750,Greetings,enter,
    192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.782,Greetings,interaction,audio_group,initial_audio_group
    192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.937,Greetings,exit,done
    192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.937,Menu,enter,
    192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:53:25.718,,end,how,app_session_complete
    192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:53:25.718,,end,result,timeout
    192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:53:25.718,,end,duration,1829
    Thank you

  • I can not get apple air play to work. I have down loaded three diffrent apps looking for a solution none of them were the right one. I spent over $10 in these apps. Can I get a refund. Do I need apple tv to run air play?

    I can not get apple air play to run from my iTunes to my WiFi reciever.
    I have spent money on 3 different apps looking for a solution.
    None have worked. Can I get a refund?
    Do I need apple Tv to work Air Play?

    About AirPlay and Airplay Mirroring
    AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
    Several Apple Articles Regarding AirPlay
    Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
    How to set up and configure AirPort Express for AirPlay and iTunes
    iTunes- Troubleshooting AirPlay and AirPlay Mirroring
    iTunes- Using AirPlay
    Apple TV (2nd and 3rd gen)- Understanding AirPlay settings
    About AirPlay Mirroring in OS X Mountain Lion
    iTunes 10- About playing music with AirPlay
    Troubleshooting AirPlay and AirPlay Mirroring
    Using AirPlay
    Thanks to the $15 Beamer, AirPlay streaming is still possible on Macs  that do not support Airplay and mirroring.
    Other solutions are the Air Parrot, StreamToMe, and AirServer.

  • How do I get iTunes songs which were downloaded from external back-up drive to play on new computer and is there a way to get my play lists back?

    When I try to play a song from my re-installed iTunes library, I get the error message:  "Song xxx could not be played because original file could not be found.  Would you like to locate it?" > "Locate" or "Cancel."  When I click on "Locate" I can't figure out how to get the song to play from any of the places that were "located."  The path is C:\users\Janet\libraries\music\iTunes
    However, iTunes songs chosen from my library will play in iTunes (current version) when I have the external back-up drive plugged in!  I recently copied my backed-up iTunes library from my external back-up drive to a new computer.
    Most of the songs, but not all, magically appear in Windows Media Player and I can play those just fine. 
    I can see my iTunes library in the newest version of iTunes, recently downloaded to new computer, but can't play songs without connecting to the external back-up drive - so maybe there is something else on that external drive that needs to be on my C: drive? 
    I am using an HP Pavillion Notebook, Windows 7, 64-bit.  My previous computer was Windows Vista.  Before Vista, I had XP. 
    Back when I had XP, I wanted to purchase some songs to download to my computer. Because iTunes had the ability, I used it to create a massive library of songs, most of which were ripped from my CDs.  I don't have an iPod and iTunes worked fine for creating playlists and then burning them to CDs. 
    Also, I'd like to know if there is a way to get back my playlists.
    And another thing - in the older version of iTunes, there was a folder in the lists on the left-hand side of the screen where I could click to see all the songs I had purchased.  I'd like to get that ability back if possible.
    In hindsight, iTunes was probably not the best choice for me to build my music library in a Windows operating system, but it seemed to be the best choice at the time.  I really wish I could convert all the songs to mp3 format.
    I have been working with computers since the days of DOS, black and white screens, and no mice.  The first computer I bought for my own use at home was a Mac and it had "Flying Toasters" as a screensaver.  (I miss that screensaver.)  It did not have a tower and I believe they called it a laptop, even though the thing was as big as a suitcase and probably weighed around 30 pounds.  However, I am by no means a computer expert.  In other words, pretend you're trying to tell your mother how to do what I am asking. =)
    Many thanks in advance to anyone who can help me.

    I copied the iTunes file from the external drive and it's in both places.  I thought all I would need is the iTunes program (which I downloaded to new computer) and my iTunes library file.  There must be something else that's missing.  My iTunes library looks the same on the new computer as it does when I open it on the external drive.  If I click on an iTunes library song from my new computer, it will only play if I have the external drive plugged in.
    My back-up drive is a mess.  I have multiple copies of music, video, photo, and document files and I don't know how that happened. ={  Obviously, I don't know how to back up stuff properly and there are back-up files extending over a 6- to 8-year period.  I think all I did was just drag and drop the main folders from the back-up drive to the same main folders on the C: drive.  Also (and I'm kind of fuzzy on this) Windows used to automatically save music files in a folder within my document files (which makes no sense to me).  As my Jewish friends would say, "Oy Vey!" 

  • How can I get audio to play from my TV when using hdmi cable?  Video looks great, just no sound.

    How can I get audio to play from my TV when using hdmi cable?  Video looks great, just no sound.
    I've tried plugging the hdmi into the TV directly and the receiver.
    I get video every time.  HBO to Go , Xfinity, ABC, Youtube, etc...
    just no audio.  Any suggestions? 
    I've tried starting the apps then plugging in the hdmi cable.
    I never tried this before I upgraded to IOS 5.

    Claudiamil-
    I had not tried it with mine since upgrading to iOS 5, so I just did.  I'm using a small Vizio HDTV.  I did not try YouTube, but did try several videos and musical numbers.  In all cases there was sound, including stereo when the source had it.
    I assume you are getting sound from the iPad when the adapter is not connected, so the volume is not turned down.  Dah*veed's suggestion to reset may be what you need.
    Fred

  • I want to play a movie from my ipad on my tv, all hooked up and i get an error message that the tv isn't authorized to play it.

    I Want to play a movie from my ipad, on a tv but get a tv not authorized message, how do you authorize a tv?

    I was not complete clear.
    Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section.  If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
    If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
    But before I would check the folders and see if the songs are really there
    In my iTune I have this, and I believe it is the default.
    Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music

  • HT3775 I have a bunch of .MOD files I cannot play from our Canon video cam. I tried renaming the files as MPEG or MOV, I get the message "The document "001.MPEG" could not be opened. A required codec isn't available." Any advice on getting these to play?

    I have a slew of .MOD files I cannot play from our Canon video cam. I tried renaming the files as MPEG or MOV, I get the message "The document “001.MPEG” could not be opened. A required codec isn't available." Any advice on getting these to play? Thanks!

    Try installing Perian or VLC. Some AVIs require a codec which simply isn't available for Mac OS X.
    (85018)

  • How do I get my ipod to play a playlist from reverse order? (Start with recently added song instead of first added)

    How do I get my ipod to play a playlist from reverse order? (Start with recently added song instead of first added)
    So I'm adding new songs to a very old playlist? Is there anyway that when I add them, they automatically go to top of playlist? How about getting one song to the top of a playlist.  That drag to arrange function is very annoying because it is slow and the playlist does not scroll up very well on a PC.

    Make a new playlist by pressing the little plus button at the very lower left corner of iTunes. An new playlist will appear in the Source pane called "untitled playlist". While the name is highlighted, you can change it to whatever you want. Drag all of the tracks from all the albums that comprise a single book to that playlist. Sync that playlist to your iPod.

  • How do i get air play to work from my macbook to apple tv

    How do i get air play to work from my macbook to apple tv? It does work with some programs like itunes but I can't get it to work with safari.

    apple tv does not work in safari. there is no web browsing capabilities on the apple tv..
    however what you are probably referring to is mirroring? iPad 2 and iPhone 4s have mirroring capabilities, so what you have on the screen is exactly what would appear in the apple tv..
    on ipad for example...ignore the settings page. Instead, go to the iPod controls. Double-press your home button to see the multitasking bar, showing all your recent apps. Swipe your finger from right to left for the mirroring icon; you'll see the AirPlay icon. Tap on that, select your Apple TV and toggle the mirror button to 'on'.

  • How can I watch a Disney movie from the Disney website I have purchased movie cd and I can go to the website on by gateway computer but can't get it to play on my iPad it wants me to download flash but apple doesn't support flash or I can down loadQuickTi

    How can I watch a Disney movie from the Disney website I have purchased movie cd and I can go to the website on by gateway computer but can't get it to play on my iPad it wants me to download flash but apple doesn't support flash or I can down loadQuickTime but don't know how. Says to email website did that but takes me back to same place to email help

    Contact iTunes Customer Support, but honestly, there are no returns for iTunes purchases.

  • HT204370 If I order a HD movie from Itunes, how do I get it to play on a projector?

    If I order a HD movie from Itunes, how do I get it to play on a projector?

    Select Sync Movies under the Movies tab for your iPhone sync preferences with iTunes. Select the movie below followed by a sync.

  • How do I get sound to play on my Samsung HDTV from my macbook pro?

    I've been trying to figure out how to get sound to play on my TV from my laptop for several days now and was wondering if anyone had any suggestions for a solution to this. I bought an Mini Display Port to HDMI converter (Kanex Iadapt) off Amazon that is supposed to have audio support. I connected it with the HDMI cable to my TV and changed my display settings to mirror and the picture comes up fine but when I tried to change the output in sound settings to my TV my TV didn't even come up as an option. I went out and bought a Y audio cable figuring my laptop may be older than 2010 and needs an additional cable, plugged the audio cable into the same HDMI outputs in the TV and still no sound. I can't think of anything else!

    I have an ancient LG 32" and a Thunderbolt/miniport-HDMI adapter that I bought from monoprice. I go through my Denon receiver through one of the HMDI ports and get sound and video on my TV. This is the one I bought - it carries audio and video and is under $7.
    Could be worth a shot...
    Clinton

Maybe you are looking for

  • PowerShell 3.0 will not install. Please Help

    I've got a Windows Server 2008 R2 Standard 64bit and according to system properties Service Pack 1 installed. However looking under installed updates the KB976932 is not installed. My goal is to install PowerShell 3.0 however I get the message the up

  • Where are my extensions in DW8?

    Where are my extensions in DW8? I'd like my desktop extensions to be in sync with my notebook. I can't find them physically in my DW8 installation. Is it as simple as copying extensions from one directory on one box to the same directory on the other

  • Export info to excel. (spool ? )

    Hi experts.. I have this problem... I am running oracle 10g and need to export a big query to an excel file... Im using the spool technique... but.. this is not working when i Have a really big query ( like about 6000 characters....) I always get an

  • "domain network" - name is forest parent domain

    I'm testing Windows 7 in our corporate environment.  How does the Windows 7 Network and Sharing center determine the name for the "Domain Network" to which I'm attached?  I notice on my test PC it is showing the name of another domain in our forest (

  • Classic (Issues?) within Mac OSX

    Just in the last two weeks, my Mac no longer lets me print to my HP LaserJet using. This week, I noticed that when I try to search for a return in Microsoft Word using "^p" Word won't let me. I don't know if this is a Mac problem or a Word problem.