Getting "Site contents" 2 times

Getting “Site contents” 2 times after migration from MOSS 2007 to SP2013 for few site collections. Please guide me on this.

Hello
Can't you remove one of the link via the navigation menu?
Best regards, Christopher.
Blog |
Mail
Please remember to click "Mark As Answer" if a post solves your problem or
"Vote As Helpful" if it was useful.
Why mark as answer?

Similar Messages

Getting site contents twice in treeview-sharepoint2013

While selecting tree view getting “site content” and “site contents” in left side navigation. How to remove site contents from treeview.if I hide tag in master page it will effect to quick lunch also. Please advise how to remove or hide "site contents"
in treeview-sharepoint2013

Hi,
According to your description, there are two “Site Contents” in the tree view.
What if disable the tree and then enable again?
As I can’t reproduce your issue in my environment, a suggestion is that you can use CSS code to hide one of them if there is a “Site Contents” always stays in a fixed position
in the tree view.
About how to use CSS selectors to find the specific element on a page:
http://www.w3schools.com/cssref/css_selectors.asp
http://css.maxdesign.com.au/selectutorial/
Feel free to reply if there are still any questions.
Best regards,
Patrick
Patrick Liang
TechNet Community Support

Get collaboration content (Discussion Board, Blog Posts, Wikki) last view time in SharePoint 2013

Hi,
How to get get collaboration content (Discussion Board, Blog Posts, Wikki) last view time in SharePoint 2013. I have tried using SPAudit setting but its not returning
list item view time. I have enabled the SiteCollection Audit setting for "Opening or downloading documents,
viewing items in lists, or viewing item properties". I have tried using below code.
SPSite site = new SPSite(siteURL);
SPWeb web = site.OpenWeb();
SPList list = web.Lists[listName];
SPListItem item = list.GetItemById(itemId);
SPAudit audit = site.Audit;
SPAuditQuery query = new SPAuditQuery(site);
query.RestrictToListItem(item);
query.AddEventRestriction(SPAuditEventType.View);
SPAuditEntryCollection coll = audit.GetEntries(query);
Is there any other way to get last view time in SharePoint
2013?? or any changes in above code?
Thanks.

Hi Patil,
According to your description, my understanding is that you want to get the last view time of any entities in SharePoint 2013
How did you do with using Site Collection Audit?
Below are my testing:
Click Settings->Site Settings
Click Site collection audit settings under Site Collection Administration
On the Audit Log Trimming section, select ‘Yes’ under ‘Automatically trim the audit log for this site?’
On the Documents and Items section, select ‘Opening or downloading documents, viewing items in lists, or viewing item properties’
Click OK
Click Audit log reports, click Content viewing under Content Activity Reports
Then select a location to save a report, click OK
‘Operation Completed Successfully’ displayed, and there is a link ‘click here to view the report’, click it.
Open the report, there were two worksheets in the file. The first one was ‘Audit Data-Table’, it contained the viewing total times. The second one was ‘Report Data 1’, it provided the time when the item was viewed.
Below is a screenshot about my report.
Through checking the second worksheet, we can see which items were viewed and the viewed time. Please have a try.
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Everything is updated!! iPhone, iPad, iTunes and MacBook Pro... All I am trying to do is drag content from my iTunes Library to the devices. iTunes gets stuck EVERY single time! What usually triggers the Non-Sense is when I am adding a 2nd file!

Everything is updated!! iPhone, iPad, iTunes and MacBook Pro... All I am trying to do is drag content from my iTunes Library to the devices. iTunes gets stuck EVERY single time! What usually triggers the Non-Sense is when I am adding a 2nd file!
Why does iTunes SUCK??
1) Many items greyed out in the menu bar, for well over 2 years, maybe more!
2) I Can't drag more than one piece of content from your iTunes library to any device (iPhone, iPad)
If you do it gets stuck for HOURS and HOURS in "Preparing To Update" and the little activity circle never completes, ever!!
I used to be able to drag over 1000 tunes, movies, etc. go have breakfast come back and it would all be on my device!!
Can't do it anymore, one song at a time, maybe an album at a time, or one movie, and that is it!!
If you do a 2nd item the other items stop loading and never continue!!
This is so BAD, I don't understand how they don't have this fixed yet!!
Please tell me I am not the only one!!
...and If I am tell me how to fix it!
Very appreciated,
Joe

Everything is updated!! iPhone, iPad, iTunes and MacBook Pro... All I am trying to do is drag content from my iTunes Library to the devices. iTunes gets stuck EVERY single time! What usually triggers the Non-Sense is when I am adding a 2nd file!
Why does iTunes SUCK??
1) Many items greyed out in the menu bar, for well over 2 years, maybe more!
2) I Can't drag more than one piece of content from your iTunes library to any device (iPhone, iPad)
If you do it gets stuck for HOURS and HOURS in "Preparing To Update" and the little activity circle never completes, ever!!
I used to be able to drag over 1000 tunes, movies, etc. go have breakfast come back and it would all be on my device!!
Can't do it anymore, one song at a time, maybe an album at a time, or one movie, and that is it!!
If you do a 2nd item the other items stop loading and never continue!!
This is so BAD, I don't understand how they don't have this fixed yet!!
Please tell me I am not the only one!!
...and If I am tell me how to fix it!
Very appreciated,
Joe

How to get the content in embed swf file in Swf Loader on run time

How to get the content in embed swf file in Swf Loader on run time
[Bindable]
[Embed(source="assets/index.swf")]
private var SWFSRC:Class;
<mx:SWFLoader id="_swfloader" source="{SWFSRC}" />

Hi Flex harUI,
Throw the error.
Access of undefined property content

Using Site Content and Structure unable to move documents,pages and getting weird error message

Hi ,
earlier we are moving a page ,document from one site to another sub site with in the Site Collection.
Now,we are getting a un-readable format error.
After selecting the destination we are getting the error.
and the file can't move.
What might me be the error.
Expecting answers related to my question.
1.As we can do using Internet Explorer,
2. Using Send To also we can move.
Using this Site Content and structure we can maintain Versoining also.
If any one face the same issue then we can easily find out the solution.
Regards ,
Prathap
SP Developer
Specify the destination to move the items you selected.

Hi,
Using Site Content and Structure unable to move documents,pages and getting weird error message
We are getting Below error:
When Moving Document items from one site to another site in the same site collection using Site content and structure(But it's working in same site,we can move documents from one library to another library)
1576|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|cccccccccnncnnnnn|

How to get 2 xml(Sibling tag) content same time and merge them

how to get 2 xml(Sibling tag) content same time and merge them and search the result value in indesign file with page number
Like
<Record>
<A>this is a text</A>
a-123
</Records>
First we need tag A and B value as :
this is a text - a-123 and then get this text page number form the indesign doc
plz help

hi
var root = app.activeDocument.xmlElements[0];
var aTag = root.evaluateXPathExpression("//Record/INAAMF");
var bTag = root.evaluateXPathExpression("//Record/IAFKF");
here I got aTag and bTag = empty
may be the reason is as I forgot to menion the proper XML path as
<Records>
<Record>
<A>this is a text</A>
a-123
</Record>
<Record>
<A>Second text</A>
a-132
</Record>
<Record>
<A>Thied text</A>

</Record>
<Records>

I just published my Muse site on Adobe, and now when i do a search and get a return on the search, it repeats the site name several times. is it in the page properties?

I just published my Muse site on Adobe, and now when i do a search and get a return on the search, it repeats the site name several times. is it in the page properties?

By search you are referring to Google search ?? or you are using any search module in your site and the keywords shows same topic multiple times on page ?
Please elaborate more, provide site url.
Regarding using keywords, description etc, you can add that to your page using page properties > metadata section.
http://muse.adobe.com/strategies-for-seo.html
Thanks,
Sanjit

How to I add options to the Context Menu for html files under Site Content

Currently in Web Page Composer... if a developer wants to get the Target URL to an html page in a WPC site (i.e. under the Site Content folder) they have to take several steps... Content Menu -> Details -> Settings -> Properties -> Access Links -> copy the Target URL. I would like to add this ability (i.e. to copy the target URL to clipboard) as a option to the "context menu" of each html file. Does anyone know if this is possible and if so how it can be done? It can be a global change if necessary.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
Also check the Mouse driver settings in the Control Panel.

Infopath 2007 "Updating Site Content Failed"

I get this error for just about everything I do with the forms we are publishing via Infopath 2007. I believe it is because our forms have a fair amount of Promoted fields in them (more than 30 each).
I've seen this article and think that maybe it will alleviate the problem: http://support.microsoft.com/default.aspx/kb/958139
The problem is the hotifx that this references is not available for public download and when I try to go through the great new Microsoft Support site (piece of absolute ____) I am unable to get a phone number to call, submit an e-mail or anything without giving them a credit card for payment. I do not intend to pay money to get the right to download or be sent a hotfix.
Does anyone know if there is a way I can test to verify that I indeed "need" this hotfix before I spend money out of my pocket?
The forms I have published to form libraries in MoSS 2007 Enterprise have many promoted fields. I can create a new content type in the site collection via Infopath if I keep the promoted fields under about 25, however once I publish it I can no longer change the content type (get the "Updating Site Content Failed" message) and have to create a new content type to make changes to any form I have. As you can imagine this is a problem as I have to constantly change the template url on my libraries and constantly re-link all of the saved forms in the libraries.
Does anyone have any ideas how to realistically fix this outside of the hotfix?
I've tried every method I can find on the internet, but nothing seems to work.

A little more information. On the server itself I don't show any indication or problem in the Event logs related to this issue.
However, on the workstation that I am attempting to publish from (Same subnet, local Gigabit Connection) I get 4 MSSOAP Errors:
Event Type: Error      Event Soruce MSSOAP
Event Category: Generic   Event ID: 16
Description: Soap error: Connection Time out
I get two of those and two of these:
Event Type: Error   Event Source: MSSOAP
Event Category: General Event ID: 16
Description: Unspecified HTTP error.
I went into the sharepoint central admin and changed the timeout value (which was 30 seconds) in the infopath forms section to 120 seconds and it hasn't made any difference.
Edit: Yes I have tried from multiple workstations. We don't load office on the server itself or I would try from there as well.

Get media content now

Received my Lumia 920 a week ago, I have been fighting with Vodacom in South Africa for 5 days now around getting MMS working. Vodacom say its Nokia who have to provide me with the MMS settings but I cannot find any solution to getting MMS working on the Vodacom network. If I try send a MMS, I get an error saying my message cannot be sent and when I receive a message it says "Get media content now", if I click on the message, the phone reports "getting media content" it plays a sound but nothing further happens, I then receive repeated notifications saying "Get media content now" about 10 or 15 times over a period of an hour, any help would be appreciated

Did you check the Settings>access point? In many cases the correct settings are in the app database an will setup automatically. You might want to do a search on these forums as this has been covered many times before. If this app is missing scan the QR code below on your phone to get it.
On the vodacom site they only offer sending a settings SMS or using USSD, both are not supported by WIndows phone (you could try the SMS option though). These setting are carrier dependent and so should be provided by the carrier.
A quick look at settings for the Nokia C7 I found this and that should translate pretty well to settings for Lumia:
Connection name: Vodacom
Internet APN
Accesspoint name: internet
Proxy address: 169.006.128.012
Proxy port: 8080
Username: [blank]
Password: [blank]
MMS APN
MMS Access point name: mms.vodacom.net
Proxy address: 169.006.128.013
Proxy port: 8080
Username: [blank]
Password: [blank]
MMSC address: mmsc.vodacom4me.co.za
They should have the settings available for manual entry just like any other carrier has. If the above does not work contact them again and demand to speak to a manger as they should have these settings and it seems you ran into a clueless agent here. As this is basically Vodafone you might try and shoot their HQ a message to complain on this.
And lastly remember; Google is your best friend in these matters..
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..
Attachments:
qrcode.png ‏1 KB

Powershell script to get Site Collection. Site Owner, Title

Hi,
I am new to SharePoint, currently I have given one task to create the powershell script which contains the below fields from our two farms. Could you please help me out with the same.
The script to list out below items:
Site Collections:
Site Collection Name:
Site Collection Owners:
Last Activity and the size of site collections.
Many Thanks & Best Regards,
Naren

To get all Site Collections:
If all you want is a list of all site collections in the farm, all you have to do is open a PowerShell window, load the SharePoint Snapin, if you haven't (Add-PSSnapin
Microsoft.SharePoint.PowerShell), and type Get-SPSite.
If you want to return the list of site collections for a specific web application, the easiest way is to just pipe it as Get-SPWebApplication
http://intranet | Get-SPSite
To get Site Collection Owners:
Add-PSSnapin "Microsoft.SharePoint.Powershell" -ErrorAction SilentlyContinue
Get-SPWebApplication "http://mySharePointSite.com"|
Get-SPSite| foreach-object{ Write-host$_.Url - $_.Owner.Email}
To get Size of all Site Collections:
Get-SPSite | select url, @{label"Size in MB";Expression={$_.usage.storage/1MB}} | Sort-Object
-Descending -Property "Size in MB" | ConvertTo-Html -title "Site Collections sort by size" | Set-Content sc.html
Regrading the retrieving the last activity I am not sure to what exactly you are looking for but I assume you are concern about getting users last logon time and date using PowerShell.
For this refer here: Get Users Last Logon Time and Date using PowerShell
Please remember to upvote if it helps you or
click 'Mark as Answer' if the reply answers your query.

My mac redirects me to other sites all the time.its some what slow.how can i fix?

my mac redirects me to other sites all the time.its some what slow.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Name/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,[lps]*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

When I click on Web mail I get "The connection has time out

When I click on "Web Mail" from Glossbrenner United Methodist Church web page, it won't log on to my email page. I keep getting - The connection has time out
The server at 74.220.207.173 is taking too long to respond.
The site could be temporarily unavailable or too busy....
If you are unable to load any pages, check you computers' network connection.
If your computer or network is protected by a firewall.....

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Ifou don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

All "Site Content and Structure" default views incorrectly showing "There are no items to show in this view"

Hi All,
On my SharePoint Online site (Office 365) all my “Site Content and Structure” default views are showing “There are no items to show in this view”. For example the “Checked out To Me” view shows “There are no items to show in this view” (shown in screenshot
below). I know this is incorrect and should show at least ten items that have been checked out to me for over two months. I am also a member of the Site Collection Administration and Owner groups.
What I am trying to do is view all the "Checked Out items" within a Site Collection including it's sub-sites.
Is there a feature that needs to be activated to get the correct information from the “Site Content and Structure” default views?
I hope you can help
Colin

Hi Colin,
As I understand, all “Site Content and Structure” default views are showing “There are no items to show in this view” in your SharePoint online site.
Check things below:
1. Go to site content and structure logs in site setting to check if there is correct information.
2. Create a new site collection to check if there are items in Site Content and Structure.
3. Switch another computer to check if it can work.
If the issue still exists, I recommend you to post it in the O365 forum.
http://community.office365.com/en-us/f/default.aspx
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Best regards,
Sara Fan
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Getting "Site contents" 2 times

Similar Messages

Maybe you are looking for