Getting "Solution validation failed" Error. SharePoint online

We have sandbox solution (web part) ready with us which is working. Now we have deployed the same sandbox solution web part on different tenant it get deployed and activated.. but when we are trying to use the solution we are getting "Solution failed
validation"...
please help.....
Prasad kambar

Found the ans to my issue.. Server Resource Quota was set to zero.. After allotting the Server resource Quota to 100 i was able to deploy the Sandbox Solutions..
Thanks..
Prasad kambar

Similar Messages

  • Database Validation Failed error while configuring RDBMS profile for audit

    Hi,
    I am using Oracle Access Manager 10.1.4.3.0 with FMW 11g (Oracle internet Directory and Oracle Virtual Directory) on Linux X64.
    While configuring RDBMS profile for OAM Auditing and reporting...
    I am getting "Database Validation Failed" error both in Identity and Access servers
    When I am looking in oblog...I got following in Identity..
    2010/07/17@06:59:28.882658     17384     17422     CONNECTIVITY     DEBUG3     0x00000201     obmessagechannel.cpp:179     "Sending: "     seqno^13     opcode^8     pMsg^{25}st={5}ma=22{4}mi=2{4}sg=0{4}rt=0     
    2010/07/17@06:59:28.882704     17384     17422     NET     DEBUG3     0x00000201     obsocket.cpp:848     "ObSocketOIS::WriteFully"     _sock^19     LocalAddr^10.31.13.129     LocalPort^6022     RemoteAddr^10.31.13.134     RemotePort^41646     
    and in Access..
    2010/07/17@06:39:09.391459     3326     3388     AUDIT     ERROR     0x00001D04     ../dbauditwriter.cpp:410     "The database audit writer was unable to perform the write"     
    2010/07/17@06:39:09.391491     3326     3388     AUDIT     WARNING     0x00001149     /usr/abuild/Oblix/10143hf/palantir/aaa_server/src/audit_handler.cpp:1119     ""Unable to write the audit record"
    Kindly advice...

    Hi.
    Strange !
    Check whether the RFC destiantion LCRSAPRFC is proper. Test the connection and Also check the exchange profile paramteres in the XI.
    Also refer
    http://help.sap.com/saphelp_nw2004s/helpdata/en/c6/6f1741b393f26fe10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/f4/67b340be3dff5fe10000000a155106/frameset.htm
    Also check what user is maintained via transaction SLDAPICUST. and carefully enter the password, also check that if user is locked.
    Hope this will help you a bit.
    Regards
    Aashish Sinha

  • I am trying to create an eprint account and I keep getting an AJAX failed error message 403

    I just bought a Phtsmart 7510 all in one printer today and I am trying to install it.  It asked me t go to eprintcenter to create an account so that I could do mobile printing.  However I keep getting an error message when I do this. 
    Here is the error message I get:  Ajax submit failed: error =403, Forbidden
    Can anybody help me with this?

    Hi I hope you are doing well and welcome to the community; 
    Please try to use another browser (Internet Explorer, Chrome, firefox, safari, Opera) I will also sign in with an alternative account Shapfish form HP, google account facebook or any other. I hear here (other members of the community) that there is an issue that engineer are working on. At the same time I know that other members have some success using this steps aforementioned.
    Hope this helps!
    RobertoR
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • On Import Metadata in Admin Tool get "Connection has failed" error

    Hello,
    I am attempting to import Metadata in Oracle BI Administration Tool v.11.1.1.5 and i get " "Connection has failed" error.
    What is the solution? Thank you in advance, Sonya

    Hi ,
    My server is on Linux 64bit and client is on windows xp
    i m facing the same error as connection has failed.
    below steps are done:
    1.Copy the tnsnames.ora from Oracle Database home (ORACLE_HOME\NETWORK\ADMIN\) to the following locations.
    \OracleBI1\network\admin (Example: C:\OBI\Oracle_BI1\network\admin)
    \oracle_common\network\admin (Example: C:\OBI\oracle_common\network\admin)
    2.Set the TNS_ADMIN environment variable value with one of the copied locations in the step 1 in user.cmd or user.sh file depending on your OS. This file will be found under \instances\instance1\bifoundation\OracleBIApplication\coreapplication\setup (Example : C:\OBI\instances\instance2\bifoundation\OracleBIApplication\coreapplication\setup)
    Can u just me furthere steps for linux server.
    Thanks

  • I have a samsung scx 4100 series and i just updated to mountain lion and now i keep getting a "filter failed" error, anyone have any suggestions as to how to fix it.

    I have a samsung scx 4100 series and i just updated to mountain lion and now i keep getting a "filter failed" error, anyone have any suggestions as to how to fix it.

    Hi again, when you clicked on Mountain Lion and Lion in the App Store you are telling the laptop to reinstall them both.
    You may have allowed simutanious downloads checked at the bottom of the window, I don't know, but I expect Mountain Lion is downloading, so Lion is waiting for it to finish, so if you have Mountain Lion installed cancel both download's.
    Cancell both downloads anyway.
    Go to the apple logo , top left, click on it, then click on about this mac, a window will open telling you what's installed,  Mountain Lion is OX 10 version 10.8.2 click on more info, to find out more, Lion will be OX10 version 10.7.4.
    Only update were it say's check for updates, not download now.

  • I'm using DVD Studio pro to burn a dvd but it won't let me cause I keep getting a "Formatting Failed" error message.  It says "Formatting was not successful. Layer 0 exceeds max layer size allowed. Choose a suitable marker location." What does this mean?

    I'm using DVD Studio pro to burn a dvd but it won't let me cause I keep getting a "Formatting Failed" error message.  It says "Formatting was not successful. Layer 0 exceeds max layer size allowed. Choose a suitable marker location that will support this condition." What does this mean?
    Kris

    It means your file is too large to fit on a single layer disk.
    Recompress to keep the overall size (audio,video and menus) below 4.5GB
    x

  • List Data Validation failed error

    I'm getting the following error "List data validation failed." while trying to upload a document which already exists.
    My Document library settings : Enabled Version Settings (Major), 
    Require documents to be checked out before they can be edited : YES,
    Validation Formula : =[End Date]>=TODAY()
    If I upload a new document  to the document library, everything is
    working fine. If I edit properties of the ListItem everything works fine. The system throws error only when I upload already existing document.
    If i make "Require documents to be checked out before they can be edited : NO" , then everything is fine. But business requirement forces me to do checkout.
    Also if i change the Validation Formula : =[End Date]<=TODAY() , then everything works fine.

    Hey Jatin,
    unfortunately the check out before editing = true is against using the same document before overwrite.
    as long as this is a business needs, i advise you to make a user control to be your document library upload form
    while uploading the document, you can check this document out programmatically and the library settings will do the overwrite for you
    also the validation will be easier when you check it programmatically 
    i hope this help, let me know if you need more clarifications 
    Ahmed Said Moussa SharePoint Consultant

  • I keep getting a connection failed error message from mail every time my computer goes to sleep, is shut down and/or I change network connections?

    Mail mail was working fine for months but now I keep getting an error message every time my computer shuts down or even goes to sleep.   I get the exclamation point error and when I try to reconnect it always falis.   My internet connection is fine and nothing else is losing connections.   The only way to fix it is to shut down mail completely and restart which fixes the connection every time, but it's getting really frustrating have to constantly shut down mail and restart it just to use my email.

    Bump ???

  • I am getting a sync failed error message after trying to download my settings.

    After upgrading to 2014 version my settings did not migrate. I have maintained my settings by uploading all my current settings recently, but each time I try to download I'm getting a "sync failed" message.

    Hello, MommaLloyd24. 
    Thank you for visiting Apple Support Communities.
    Here are the steps I would recommend going through as they should resolve the issue.
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    Jason H.

  • Why do I get 'ResolveManifestFiles task failed' error when building a WPF app that references WinRT API?

    0
    down vote
    favorite
    I am working on a WPF app that I want to create for Windows 8. I followed steps mentioned in
    Hansleman's blog to make some manual modifications using WinRT functions in a WPF app. Everything worked well, until I tried to publish the app. When I clicked on publishing the app I got error "The 'ResolveManifestFiles' task failed unexpectedly.
    System.ArgumentException: Value does not fall within the expected range."
    Afterwards, it will produce the same error when attempting a simple solution build.
    Even if you create a simple WPF project and add the references mentioned in blog to access WinRT functions and publish, this issue can be reproduced.
    I think it would be common scenario to call WinRT functions from WPF and someone should have done it. Is anyone aware what should be done to fix this issue?

    I am having the same problems and came across this article while researching a workaround. 
    It is surprising more people aren’t talking about this.
    Here are the steps to reproduce the problem; Using Visual Studio Express 2012 (x64) create a new VB Windows Forms Application. 
    Unload the project and edit the [ProjName].vbproj in the solution explorer. 
    Add <TargetPlatformVersion>8.0</TargetPlatformVersion> to the <PropertyGroup>. 
    Save and reload the project.  In Add Resource/Reference Manager add the Windows.minmd found under Windows/Core. 
    This WinRT/Desktop solution will run as expected.  Now try to Publish this solution. 
    It will FAIL with the following ERROR; “The ResolveManifestFiles task failed unexpectedly, Value does not fall within the expected range.” 
    Attempting to build or run the solution again now will fail with the same Error. 
    The only way to build the project now is to remove the “Enable ClickOnce security settings” option under the project properties Security settings. 
    Occasionally using this trick, the solution will build but not run. 
    When that happens jiggle around with Debug/Release Solution Configurations and the Any CPU/x64 Solution Platforms then rebuild and try the run again. 
    This fussing around will get you through development however any attempt to publish with restore the ClickOnce security setting and create the previous Error.
    The first question here is how do you publish a WinRT app for the desktop with VS2012 Express. 
    Then secondly, if that is not possible can we publish this Express solution with a 3rd party deployment tool like InstallShield Limited Edition or the WIX Toolset. 
    Neither however seems functional in a VS Express environment. 
    Then thirdly, are there ways to access hardware sensor devices from a desktop solution without resorting to the WinRT API.
    Any ideas or new research directions would be greatly appreciated.

  • Getting "Risk Analysis Failed " error while raising request from IDM

    Hi friends,
    Some of the User to Role mapping requests from IDM did not reach CUP (request ID = null) . When noticed the VDS log , we found the error from GRC webservice to be Risk Analysis Failed . We thought it might be an RAR issue , however , the request just got through CUP when submitted from GRC webservice directly . From RAR perspective also, everything looks ok .
    Please provide your thoughts as to whether this error is pertaining to some other issue or suggest me what I can check in Identity center to correct this .
    Thanks in advance for your help .

    The connector set up are all looking correct . However the requests are not getting raised in many cases .
    At one point we identified that , since our SAP systems have been migrated to DB2, some of the systems were down .
    So when the system is down we decided , Risk analysis is failing . however , now the systems are up and running and still the risk analysis is failing .

  • Getting "Swf compilation failed" error

    Whether trying to publish a simple PowerPoint presentation from Captivate 6 or Captivate 8 (Trial), I am getting the following error:
    Swf compilation failed.
    Note:  Please verify if any of the actionscript keywords is used as user variable name.
    Does anyone know what this error means?  I am not using any variables.
    Gigi Weiss
    [email protected]

    Hi There,
    Please try the below steps and check if it helps :
    Go to C:/programfiles/Adobe/Adobe Captivate(version)/AdobeCaptivate.ini           
    Open the file with notepad and add the line Use32BitJVMForPublish=1 
    Save it and Try to publish the project .
    Regards,
    Mayank

  • I am getting an Update failed error and I have tried clicking Retry to no avail... it tells me to contact customer support. What can I do to correct this and get the update?

    The message I got is "UPDATE FAILED - download error. Press Retry to try again or contact customer support" I have pressed the retry button a few times but the update on continues to fail and I get the same message. What will repair this issue?

    update manually:
    pre cc updates:  http://www.adobe.com/downloads/updates/
    cc updates:  http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
    cc 2014 updates:  win (http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html) / mac (http://prodesigntools.com/adobe-cc-2014-updates-links-mac.html)

  • I am getting a "Installation Failed" error when installing PS and AI

    Exit Code: 6 Please see specific errors below for troubleshooting. For example,  ERROR: -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 2 error(s) ----------- Payload: Microsoft Visual C++ 2012 Redistributable Package (x64) 11.0.61030.0 {3E272A93-C06B-4206-AD02-0EBE02535E20} ----------- ERROR: Third party payload installer vcredist_x64.exe failed with exit code: 2147942750 ERROR: Failed to repair Microsoft Visual C++ 2012 Redistributable Package (x64). Please try repairing it by double clicking on the executable at "C:\Users\EdgarJ\AppData\Local\Temp\{98186435-AFD8-4F64-91DE-42B1D2084588}\Photoshop_15_L S20_win64\Adobe CC 2014\payloads\Microsoft VC 2012 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2012 Redistributable Package (x64) from Microsoft website - www.microsoft.com -------------------------------------------------------------------------------------
    Help please!

    Hi Orchid Master,
    It looks like that VC installed on the machine seems to be damaged.Please navigate to the control panel and uninstall Visual C++ 2012 (x64) and download the latest version from the below mentioned link.
    http://www.microsoft.com/en-in/download/details.aspx?id=30679
    Cheers,
    Kartikay Sharma

  • I keep getting a "Build Fail" error when trying to load Photoshop.  Other Adobe programs work just fine.

    My error looks like this...
    Mon Jan  5 12:56:58 2015
    [INFO] AdobePackageBuilder - Build Version - 1.7.0.43
    Mon Jan  5 12:56:58 2015
    [INFO] AdobePackageBuilder - Logging Level verbosity Set  to 4
    Mon Jan  5 12:56:58 2015
    [INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /Applications/Utilities/Adobe Application Manager/CCP/toolkit/../toolkit/PackageTemplate/CS6/Template_Uninstall.bin /Applications/GKB/Build/GKB_Uninstall.pkg
    Mon Jan  5 12:56:59 2015
    [INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /Applications/Utilities/Adobe Application Manager/CCP/toolkit/../toolkit/PackageTemplate/CS6/Template_Install.bin /Applications/GKB/Build/GKB_Install.pkg
    Mon Jan  5 12:56:59 2015
    [INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /Applications/Utilities/Adobe Application Manager/CCP/toolkit/../toolkit/ASU/packages /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/ASU2/packages
    Mon Jan  5 12:56:59 2015
    [INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /Applications/Utilities/Adobe Application Manager/CCP/toolkit/../toolkit/ASU/Install.dylib /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/ASU2/Install.dylib
    Mon Jan  5 12:57:00 2015
    [INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /tmp/C38D2C56-1DA6-472B-B8C4-6FB284E7DA66/ACCCx2_8_1_451/Install.app /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/ASU/Install.app
    Mon Jan  5 12:57:01 2015
    [INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /tmp/C38D2C56-1DA6-472B-B8C4-6FB284E7DA66/ACCCx2_8_1_451/packages /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/ASU/packages
    Mon Jan  5 12:57:02 2015
    [INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /tmp/C38D2C56-1DA6-472B-B8C4-6FB284E7DA66/ACCCx2_8_1_451/resources /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/ASU/resources
    Mon Jan  5 12:57:02 2015
    [INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /private/tmp/50ABE1F7-5C2B-4522-9970-612979FA2BB6/PHSP/LS20/15.0/Photoshop_15_LS20/Adobe Photoshop CC 2014/Install.app /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/Setup/PHSP15.0en_US/Install.ap p
    Mon Jan  5 12:57:02 2015
    [INFO] AdobePackageBuilder - Copied Setup file/folder (Install.app)
    Mon Jan  5 12:57:02 2015
    [INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /private/tmp/50ABE1F7-5C2B-4522-9970-612979FA2BB6/PHSP/LS20/15.0/Photoshop_15_LS20/Adobe Photoshop CC 2014/packages /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/Setup/PHSP15.0en_US/packages
    Mon Jan  5 12:57:02 2015
    [INFO] AdobePackageBuilder - Copied Setup file/folder (packages)
    Mon Jan  5 12:57:03 2015
    [INFO] AdobePackageBuilder - Copied File (payloads/Media_db.db)
    Mon Jan  5 12:57:03 2015
    [INFO] AdobePackageBuilder - Copied File (payloads/Media_db.sig)
    Mon Jan  5 12:57:03 2015
    [INFO] AdobePackageBuilder - Copied File (payloads/setup.xml)
    Mon Jan  5 12:57:03 2015
    [INFO] AdobePackageBuilder - Registration is not suppressed, not removing Grwl package.
    Mon Jan  5 12:57:03 2015
    [INFO] AdobePackageBuilder - ASU at Path (/Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/Setup/PHSP15.0en_US/Install.a pp) is not found. Skipping copying and renaming.
    Mon Jan  5 12:57:03 2015
    [INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /private/tmp/50ABE1F7-5C2B-4522-9970-612979FA2BB6/PHSP/LS20/15.0/Photoshop_15_LS20/Adobe Photoshop CC 2014/payloads/AdobePhotoshop15-Support /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/Setup/PHSP15.0en_US/payloads/A dobePhotoshop15-Support
    Mon Jan  5 12:57:03 2015
    [INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /private/tmp/50ABE1F7-5C2B-4522-9970-612979FA2BB6/PHSP/LS20/15.0/Photoshop_15_LS20/Adobe Photoshop CC 2014/payloads/AdobeCameraRaw8.0All /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/Setup/PHSP15.0en_US/payloads/A dobeCameraRaw8.0All
    Mon Jan  5 12:57:04 2015
    [INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /private/tmp/50ABE1F7-5C2B-4522-9970-612979FA2BB6/PHSP/LS20/15.0/Photoshop_15_LS20/Adobe Photoshop CC 2014/payloads/AdobePhotoshop15-en_US /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/Setup/PHSP15.0en_US/payloads/A dobePhotoshop15-en_US
    Mon Jan  5 12:57:04 2015
    [INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /private/tmp/50ABE1F7-5C2B-4522-9970-612979FA2BB6/PHSP/LS20/15.0/Photoshop_15_LS20/Adobe Photoshop CC 2014/payloads/AdobeCameraRawProfile8.0All /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/Setup/PHSP15.0en_US/payloads/A dobeCameraRawProfile8.0All
    Mon Jan  5 12:57:05 2015
    [INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /private/tmp/50ABE1F7-5C2B-4522-9970-612979FA2BB6/PHSP/LS20/15.0/Photoshop_15_LS20/Adobe Photoshop CC 2014/payloads/AdobeColorPhotoshop5_0-mul /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/Setup/PHSP15.0en_US/payloads/A dobeColorPhotoshop5_0-mul
    Mon Jan  5 12:57:05 2015
    [INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /private/tmp/50ABE1F7-5C2B-4522-9970-612979FA2BB6/PHSP/LS20/15.0/Photoshop_15_LS20/Adobe Photoshop CC 2014/payloads/AdobeAPE3.4-mul /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/Setup/PHSP15.0en_US/payloads/A dobeAPE3.4-mul
    Mon Jan  5 12:57:05 2015
    [INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /private/tmp/50ABE1F7-5C2B-4522-9970-612979FA2BB6/PHSP/LS20/15.0/Photoshop_15_LS20/Adobe Photoshop CC 2014/payloads/AdobePhotoshop15-Core /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/Setup/PHSP15.0en_US/payloads/A dobePhotoshop15-Core
    Mon Jan  5 12:57:08 2015
    [INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /private/tmp/50ABE1F7-5C2B-4522-9970-612979FA2BB6/PHSP/LS20/15.0/Photoshop_15_LS20/Adobe Photoshop CC 2014/payloads/AdobeColorJA_ExtraSettings5_0-mul /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/Setup/PHSP15.0en_US/payloads/A dobeColorJA_ExtraSettings5_0-mul
    Mon Jan  5 12:57:08 2015
    [INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /private/tmp/50ABE1F7-5C2B-4522-9970-612979FA2BB6/PHSP/LS20/15.0/Photoshop_15_LS20/Adobe Photoshop CC 2014/payloads/AdobeColorNA_Recommended5_0-mul /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/Setup/PHSP15.0en_US/payloads/A dobeColorNA_Recommended5_0-mul
    Mon Jan  5 12:57:08 2015
    [INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /private/tmp/50ABE1F7-5C2B-4522-9970-612979FA2BB6/PHSP/LS20/15.0/Photoshop_15_LS20/Adobe Photoshop CC 2014/payloads/AdobeColorCommonSetCMYK5_0-mul /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/Setup/PHSP15.0en_US/payloads/A dobeColorCommonSetCMYK5_0-mul
    Mon Jan  5 12:57:08 2015
    [INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /private/tmp/50ABE1F7-5C2B-4522-9970-612979FA2BB6/PHSP/LS20/15.0/Photoshop_15_LS20/Adobe Photoshop CC 2014/payloads/AdobeColorCommonSetRGB5_0-mul /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/Setup/PHSP15.0en_US/payloads/A dobeColorCommonSetRGB5_0-mul
    Mon Jan  5 12:57:08 2015
    [INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /private/tmp/50ABE1F7-5C2B-4522-9970-612979FA2BB6/PHSP/LS20/15.0/Photoshop_15_LS20/Adobe Photoshop CC 2014/payloads/AdobeVideoProfilesCS5_0-mul /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/Setup/PHSP15.0en_US/payloads/A dobeVideoProfilesCS5_0-mul
    Mon Jan  5 12:57:09 2015
    [INFO] AdobePackageBuilder - START utilCopySrcFolderToDstFolder /private/tmp/50ABE1F7-5C2B-4522-9970-612979FA2BB6/PHSP/LS20/15.0/Photoshop_15_LS20/Adobe Photoshop CC 2014/payloads/AdobeColorEU_ExtraSettings5_0-mul /Applications/GKB/Build/GKB_Install.pkg/Contents/Resources/Setup/PHSP15.0en_US/payloads/A dobeColorEU_ExtraSettings5_0-mul
    Mon Jan  5 12:57:09 2015
    [ERROR] AdobePackageBuilder - Failed to find the dmg file path (null)
    Mon Jan  5 12:57:09 2015
    [ERROR] AdobePackageBuilder - Failed to package the update - null.

    That's definitely enough to start.
    It sure seems like it should work...and then I saw that you're using a router. It could very well be that the router is the weak link here.
    Instead connecting to your network router, try using a direct USB connection from your MBP. If that doesn't work, you read this post, which may be relevant to your problem:
    http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/Scanning-from-Mac-10-7-fa ils-after-all-recommendations-Not-ready/td-p/1287003
    It seems you're up to date with software. Post with your results.

Maybe you are looking for