Getting sound back in sync, and editing source videos
Yes yes, I'm sure its in the manual, and on google, but I couldn't find it. I'm an idiot, but I need your help
The sound is 0.5 sec out of sync on my video. I want to edit the original avi in Soundbooth.
First question: how do i move the sound a smidge forward, a smidge backwards in soundbooth.
Secondly: if I edit the original avi, will Premiere go through and update my finished video. That's what I want to happen.
Chris
Its definitely a codec issue - I used a Canon FS200, which saves in unhelpful .MOD files that Premiere cant import even when converted to MPEG2. So I used Bink and Smacker to convert it to AVI. The sound is in sync as a MOD file, but not as an AVI - the gspot screenshot is here: http://www.uploadscreenshot.com/image/50779/9057637
Happy to reconvert, but not if I will have to totally re-edit the video in Premiere. If I can change the codec and tell Premiere to update to the new file, then cool. Otherwise no.
That aside though, I want to edit the sound, to take out the background hum, and use a bit of compression on the sound levels.
Thanks for your help!
Chris
Similar Messages
-
I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !
I also tried resetting settings all to no avail ...I looked up some advice and watched utube video advice on how to fix without success..
The volume control button on side does not work ,I got the iPad last August and wonder if it is a fault that means I must return it for replacement from where it was purchased ?The Retrospect you used way back when is no longer around. The company was sold and that company produced a new version of Retrospect - Retrospect 8.x
So, as you've been told, you would have to be running a Tiger system with an old version of Retrospect software (5.x or 6.x - you would need to know) assuming you can find the software.
As best I can remember you cannot extract files from a Retrospect backup except using the software since Retrospect did not normally make a file by file backup rather it created an archive of the files in the backup. I'm assuming that the EMC/Retrospect people have told you that old Retrospect backups are not accessible by Retrospect 8.x? -
Help.I uninstalled ios8 using the directions on the web site and now all my apps,mail are gone.I backed up to iTunes first but when I try to sync to get everything back,it starts and then says it has failed.What do I do now.Thanks.Jane
The first time an iPhone is connected to iTunes that is used to sync with another iPhone or iOS device, you are prompted to transfer the backup for the other iPhone or iOS device or to set up the iPhone as a new iPhone.
The former does as provided - it transfers the backup for the other iPhone or iOS device to the iPhone replacing all data on the iPhone that is included with the backup being transferred. The latter does nothing allowing you to make your various selections for the iPhone sync preferences with iTunes.
This is designed to be done right away with a new iPhone.
If you don't have a backup for the iPhone with iTunes on your computer and don't have an iCloud backup that hasn't been updated since choosing to transfer the backup for your iPod Touch to the iPhone, the data that was on the iPhone is gone. -
Lost sound in some film clips when finishing project. Using iMovie 11, after adding music to photo section, could not get sound back in 2 film clips at end of movie. Beginning clips ok. How do I restore sound? Thx.
Everything in your project will be exported when you use the share menu.
If you want to export only half, I suggest that you
1) Select the project in the Project Library.
2) Click FILE/DUPLICATE PROJECT
3) Give the duplicate a name, like Project A snippet.
4) Open the duplicate project in the Project editor and delete the segments that you do not need.
5) Then Share.
You mentioned surrounding a portion of the clip you were editing in Yellow. Once you do this, you should right-click and then select either DELETE SELECTION, TRIM TO SELECTION, or one of the other options available. That is a key tool in editing.
You mentioned MPEG Streamclip. I agree that MPEG Streamclip is a great tool. -
Missing Format Text, Insert, and Edit Source, etc Options on Some Pages
I’m having trouble understanding why certain pages have more edit options than others. I’m new to Sharepoint Workspace 2010 and I’ve been reading/ researching for answers for 2 days now. I tried to HyperSnap in some pictures however it will not allow me
to until my account is verified and it's not sending a verification email, sorry!
Issue:
On some pages, I have the edit pencil with lots of great edit options such as Format Text, Insert and Edit Source. (This is good!)
On some pages I have no edit pencil, but when I go to Page
à Edit Page à I get few edit options, not including Format Text, Insert or Edit Source. (This is not good)
After reading other somewhat similar posts, I noticed that on the pages where I get lots of edit options, they show SitePages in the URL. Where I get few edit options, SitePages is not in the URL.
Is there a fix so that I can have the expanded edit options in all of my pages? Thank you for your help!Hi,
In SharePoint we don’t have edit page options [ribbon toolbar page edit formatting options] for all types of page for application page we cannot edit application page like site pages
again the missing edit button might be due to many causes:
Can you verify that it's not a permissions issue? Try navigating to the page in edit mode by appending to the url: your-site/Pages/YourPage.aspx?ControlMode=Edit&DisplayMode=Design
Or you can try this
your-site/Pages/YourPage.aspx? ?ToolPaneView=2
1. You can check that on some pages the ribbon is hidden by default. You need to make it visible by clicking on "Show Ribbon" on the "Site Actions" drop-down menu.
2. You haven't been doing Visual Upgrade (which actually replaces your master page with the v4.master)
3. If you have different master page and may be your master page is not 100% compatibile with SP2010, nor does it use the elements from v4.master (collaboration) or the example nightandday.master
To add the button in your page you could use the <SharePoint:PageStateActionButton id="PageStateActionButton" runat="server" Visible="false" /> (if you've seen already that would generate the button on the left side of
the ribbon)!
Please can you ping the URL of the page and how you crated that page to further assist, we would be happy to help.
Krishana Kumar http://www.mosstechnet-kk.com -
My first IPAD 2 wireless failed, so a second IPAD 2 was sent to me. I have game apps that aren't transfering at the levels I have achieved. Is there a way I can keep the game app levels where I am? ie, Planet fish< solitaire, Sudoku, bejeweled 2, shazam-(has saved my content)...so why has some of these not saved my content? Or is there something other than back up, syncing and restoring that will save what I have accomplished so far?
Thamks
CAssuming that the Library is intact, then simply drag the back up to your internal HD - put it on the desktop and open it, to make sure all is well:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library' and point it at the Library on the desktop.
If it is, trash the one in your Pictures Folder and put the restored one in its place.
Regards
TD -
I have 2 movies that i need downloaded tonight, i sent a request to apple and i might not get that back till tomarrow and i need these tonight!! Help!
Huh?
Why are they no on your computer?
You purchased them? They downloaded?
What is the issue? -
Crackling and popping sound when playing music and watching youtube videos
there is a crackling and popping sound when i watch videos on youtube or play music/videos using vlc media player and windows media player. recently it has gotten to a point where it happens when windows is starting up or even when the laptop is required to play a sound for example when i plug in a removeable hardware such as thumbdrives
Hi @donnabail ,
Thank you for visiting the HP Support Forums and Welcome. I have read about your HP 2000 Notebook and getting a buzzing or popping sound while playing music and watching Youtube videos. Try performing a hard reset.
When performing a hard reset please note remove any and all USB devices. Disconnect all non-essential devices.
You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook that might have caused this.
You can try this
1. Right click the Speaker icon in the bottom right corner.
2. Click Playback Devices.
3. Click Speakers.
4. Click properties.
5. Click the advanced tab on the Properties window.
6. Change the Default Format drop-down to the highest quality.
7. Apply the properties.
8. Click OK to close the properties window.
What happens if you right click on the video while playing a video and take the check out of hardware acceleration. Shut the browser down and restart the notebook.
Have you checked for an update on the Active X.
Please let me know how this goes.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
How to convert and edit HD video
Because of the widely using of HD Camcorder, now it is really convenient to record family parties and other things you are interested in. Nowadays, people would like to share their things with the rest of the world through Internet, such as youtube.com and other video websites.
This guide aims to show you how to convert and edit the video you recorded using your HD camcorder
What you need is a powerful HD Converter.
Step 1: Load Video
Click “Add File” to load the video that you want to convert.
Step 2: Choose Your Output Profile and Settings.
From “Profile” drop-down list you can choose your output profile according to your need.
You can also click “setteing”adjust the settings of your output video, such as “video/audio encoder”, “Video/audio Bitrate”, “Channels”, “Resolution” and so on..
Step 3: Video Editing.
This powerful MTS Converter allows you to do many video editings.
1. Click "Effect". to make special effect for your movie.
You can adjust the “Brightness”, “Contrast”, “Saturation” and also you can use “deinterlacing” to improve you output effect.
2. Trim: .
“Trim” function allows you to pick up any part of your video to convert. You can just convert a part of your video that you want.
3: Crop: .
Cut off the black edges of the original movie video and watch in full screen on your iPod using the "Crop" function.
Step 4: Conversion.
After you have done all the steps above you can click “Start” button to start your conversion.
Here I also recommend you some High Definition video converter, MTS Converter, M2TS Converter.
Hulu Downloader
Total Video Converter
Best DVD Ripper@ Tamwini
Your only goal is to sell software.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009 -
Does last generation mac's support Intel Quick Sync and Intel Clear video HD technologies?te
Does latest mac's with Intel HD3000 Integrated Video supports Intel Quick Sync and Intel Clear Video HD technologies? Which software packages use it? Do I need to upgradde my OS?
Speaking as the real Alec dot Muffett (at gmail dot com; also Google me) - I would also be interested in my namesake's question, but mostly from a video rendering viewpoint.
Also I am interested to learn whether someone else shares the same name as me. -
How do I get sounds back? I don't know when an email arrives and my apps with songs don't work
How do I get my sounds back? My apps with songs don't work and I don't know when a message or email arrives.
ThanksIs it on mute? There is a switch on the side which may be mute or rotation lock. If it locks the rotation, double tap the home button and swipe your finger to the right. You should see volume, brightness, etc... On the far left is a button to mute or lock rotation. Make sure it is not on. If you still can't hear anything, go to settings> general> sounds> ringer and alerts and slide the dot to the right.
Hope this helps!
Caleb. -
How can i get songs back after erase and sync?
How can i get songs back after pressing erase and sync by mistake?
If they are no longer stored in your iTunes library and were only on your iPod, I'm afraid you are out of luck. Sorry.
B-rock -
How view and edit source code before publish to iWeb
I noted the following iWeb page plays music when it opens: http://homepage.mac.com/kkirkster/maya_test/
How does one change the source code in iWeb before it is published so that such a change as he did works in opening a blog page?
Dennis
Power Mac G5 Mac OS X (10.4.4)I could as easily edited the iWeb slideshow.html page but I wanted to test the features of the newer slide show.
The page was uploaded to my .Mac account (iDisk) and then copied to my Desktop. I edited the images to reduce their file size and edited the page code and reposted the entire thing (drag and drop) in my iDisk Sites (Homepage) folder.
The page was to test the features of the new javascript slide show and is S&G stuff.
Being a dial-up user (very slow) I wanted to give the value of the new slide show without the added bloat of the new iWeb software.
Here is the iWeb version with the same music code pasted into the slideshow.html page:
http://web.mac.com/kkirkster/iWeb/Maya/Maya.html
Once the first page loads completely a viewer can click on the "Start Slideshow" button and view the images and listen to very bad MIDI music.
Simple copy/paste of some object and embed tag code using Text Edit (set to plain text).
So. I'll make some slide show pages using iWeb and add a bit of simple code and then repost the page at my Homepage site.
Less bloat. More filling! -
For some reason I can't get sound on Youtube on Safari or Firefox, there is an x beside the megaphone icon. Itunes is OK I'm a technohpobe so completeley stumped, can anyone help me please?
YouTube might have changed the setting. Volume slider may be hidden.
Temporary fix:
Hover the mouse near the speaker icon and hold it to reveal the volume slider.
Increase the volume level.
Best. -
How do I get sound back on my ipad 4?
I have an ipad 4 and now I no longer get sound and have lost the ability to play you tube videos. I have NOT used the side mute switch.
Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
Maybe you are looking for
-
I'm getting Error Code: "This computer is no longer authorized for purchased items that are on this iPad." I have tried re-authorizing and the error persists. I have also tried de-authorizing ALL my devices, then re-authorizing and that did not help
-
Outlook Quirk With E-Mail Submission of XML and/or PDF
Hello all. I am running into an annoying little Outlook quirk when testing e-mail submissions of PDF forms. When the submit button is clicked, Outlook will open a new message window as it should, but the Send button will not trigger when clicked. The
-
How to distribute Reconcilation account balance from a Prft Cntr-FAGLGA35
Hello, Please provide your input for the below query: How to distribute Reconcilation account balance from a Prft Cntr-FAGLGA35? Regards,
-
Event ID 207 Failed to generate publishing metadata
Hello All, On the publishing server, I see this error (Event ID 207) - Failed to generate publishing metadata. Reason: The underlying provider failed to Open. Not sure what to look for and how to fix the issue. I am able to add packages within the
-
hi gems.. cant i use DESC as a column name??? when i was trying to create a table having one of the column name DESC VARCHAR2(250) , then it got failed with invalid identifier error..