Getting sound into roxio creator 9

last year I purchased an HP with windows 7. There are some radio programs I record from the internet with creator 9 but since windows 7 and realtek HD I can't get any audio from the soundcard to use the record feature. My older computer with windows xp and the same roxio program worked great. What's my problem?

EMC 9 was not designed for Windows 7 nor was Creator 2009. Creator 2010 is the current application made for Windows 7. I have all three versions.
If you are using Sound Editor then when you click on record audio you should see another window or drop down tab to select the audio source.
Go over to the Roxio support BB and post the question under the Legacy Applications EMC 9 and see what you get for an answer.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Similar Messages

How to get sound into MBP?

Hi!
I wonder if somebody knows what cable I need to get sound into my MBP? I know it is digital so what
device do I need? I have an Apogee Mini Me device with spdif out but it's not the same kontakt.
Any ideas?
Peter

Ok, thank's!
I own one of these:http://www.motu.com/products/motuaudio/8pre/optical.html
It has 8 adat (optical) outs, do you know if it will work with all 8 or just 2 channels, or at all
since even if it's optical it is adat, well I'm a little confused about this.
The units mensioned with the cable was mostly portabel players.

How do I get sound into the computer from my webcam?

Hello,
I have a mac pro intel 8-core and need to use webcam with skype. The thing is, there is no build in mic on the 8-core and there is no mini audio input jack so how do I get the sound in from a webcam?
In fact, are there webcams available that have the built-in mic sending the signal through USB or firewire? The only webcams I found had a mic with a mini-audio plug for plugging into the computer. But of course, there is no jack to plug it into.
Besides using a firewire camcorder, is there anyway to get sound in from a webcam?
Thanks so much,
Kirk

Hi
I'm using Skype with a Logitech Pro 9000 camera with built in Mic.
I didn't need special drivers, it worked as soon as it was connected. It was configured in -
System Preferences - Sound - Input - then select Logitech Camera, USB and you are done.
Regards, Ian Macdonald

I just bought an Apple TV and i have a bose sounddock with a mini jack in the back and and optical cord with a mini adapter on it (so optical cord going into the Apple TV and the mini adapter on the other end going into my bose dock but i dont get sound??

I just bought an Apple TV and i have a bose sounddock with a mini jack in the back and and optical cord with a mini adapter on it (so optical cord going into the Apple TV and the mini adapter on the other end going into my bose dock but i dont get sound?

Not all the sound docks accept both analogue and optical on the auxillary input - I don't think the portable ones does but may be wrong - check the user manual.
As I said earlier all the mini optical (min Toslink) adapter does it make the optical connector fit a smaller socket, it does not convert digital audio to analogue for an analogue only auxillary input.
AC

"New in iTunes" newsletter contents received in iPad email will not produce sound. Any ideas as to why? If I go into the iTunes program, I get sound without any problem.

"New in iTunes" newsletter contents received in iPad email will not produce sound for music samples. Any ideas as to why? If I go into the iTunes program, I get sound without any problem.

Amazing! I'm a dance instructor and am doing the exact same thing as you - and not seeing what I need on my iPad Air ... I can't believe there has been no reply on this! I also can't believe there isn't an easy way of seeing track info in the iPad or iPhone but I've spent hours searching and am not finding anything

Does anybody knows how to get sound from my Mac Mini into my Bose Lifestyle V35?

Hi, I am trying to get sound from my Mac Mini into my Bose Lifestyle V35...I get perfect image but no sound... any idea? Thanks

You don't mention which version of Mac Mini that you have. Here is some info from Apple.

How do I get sound from external device into my iMac?

Hi there, I am trying to get sound from a Pioneer DJ mixer which has standard RCA outputs into my my new 21" iMac. Typically in the past I would get a converter from RCA to 1/4" stereo jack and plug into microphone input, how simple. Now Apple has changed the set up and have no idea as to how to get sound in. The headphone jack in the back of the iMac will only take sound in from earbud microphone, other than that it will only be for sound output. Any help would greatly appreciated.

beat maker wrote:
do i need to transfer the midi region to the audio region to hear the play back.
If you need audio monitoring of your device the "Software monitoring" in the Logic Preferences must be enabled. You can switch on the Audio Track monitoring button (labeled as "I" at the bottom of the channel strip).
ive tried recording the keyboard audio thru and audio track it works just cant quantize it like u said and i think ive already tried it before but ill give it a go again
This is wrong conception. To be able to quantize or do any processing like that, you need to record your performance using a midi track in Logic.
1. I hope you have created some Multi or Standard Instrument so you can edit (quantize) the midi region etc. When you decide that your midi work is O.K you can record it as audio using the Audio Track you are talking about.
2. The other way (new one) is to use the "External" plugin inserted on a Software Instrument.
This way combines midi and audio i.e you record/draw the midi on the Software Instrument track and is outgoing from the Software Instrument channel strip. In this method you must use "Real Time" bounce cause you use external midi device.
3. If decide to use the second method you can bounce the audio but you also can record the audio on an Audio Track if route the Software Instrument to a Bus and assign the Audio Track "Input" to record from that Bus.
!http://img59.imageshack.us/img59/4967/aglogo45.gif! [www.audiogrocery.com|http://www.audiogrocery.com]

I am having trouble getting sound on video clips I have imported into Premiere Elements 10.

I am having trouble getting sound when importing video clips into Premiere Elements 10. Is someone able to offer me a solution as I have no idea what I have done to cause this to happen.
The clip has sound when opened with windows media player.
Thank you

Hi Steve,
After reading everybody’s responses I am feeling a little out of my depth. Being new to this I am having difficulty in understanding a lot of the information given to me and also in the information you require from me. It appears that one thing I should never do is mix film from two different cameras. I would really like to fix this one particular clip though as it holds an interview that was taken when leaving Coober Pedy and something that I don’t want to lose.
I have today done some research on the camera that took the offending video clip. It was a Samsung S85 and according to the Samsung website it uses MJPEG video format.
Here are the specifications as per the Samsung website.
Camera Type
Ultra-Compact Point-and-shoot Digital Camera
Image Quality
Image Sensor
1/2.5" 8.3 Megapixel CCD
Effective Resolution
8.2 million pixels
Color Depth
24-Bit RGB
Color Modes
Normal, B/W, Sepia, Negative, Red, Green, Blue, Custom Color
Image File Formats
JPEG (Super Fine, Fine, Normal)
Recorded Resolution
8M (3264 x 2448)
7M (3264 x 2176) - 3:2
6M (3264 x 1824) - Wide
5M (2592 x 1944)
3M (2048 x 1536)
1M (1024 x 768)
Video Recording
AVI Motion JPEG with Audio
640 x 480 @ 30 or 15 fps
320 x 240 @ 30 or 15 fps
Clip length limited only by available memory
5x optical zoom available during video record
Audio Recording
WAV format (monaural)
I downloaded and installed Media Info and Morgan Multimedia MJPEG Codec V3.99.108 today. Do I have to register it to get it to operate? I read the documentation file that came with it hoping to find a clue as what I should do but I could not comprehend the information it contained.
Thank you and other members who have responded to my plea for all the help you have given me.
Judy

Now I have to covert my i tunes to MP-3 formate to insert them into a power point presentation These songs are in my i tunes library on my computer I know how stupid it sounds how to I get them into a file on my computer seperate from my i tunes library

S LIKE i BOUGHT SONGS NOW THERE IN THIS I TUNES LIBRARY THING NOW HOW TO GET THEM INTO A FILE SEPERATE IN MY DOCUMENTS ITS LIKE HOW DO i BREAK INTO THE I TUNES STORE ON MY COMPUTER AND GET THE MUSIC i BOUGHT AND PUT IT INTO MY COMPUTER FILE DOCUMENTS SO i CAN PUT IT INTO POWER POINT PRESENTATIONS AND IN A FORMATE COMPATABLE WITH WINDOWS POWER POINT. I DID IT ONCE SEEMS LIKE I FORGOT THE RECIPE I DID IT WHEN MY KEY BOARD WAS DOWN JUST WITH THE MOUSE I MAILED IN MY LAP TOP GOT THE MUSIC OFF INTO A M-P3 PLAYER GOT IT BACK GOT THE I TUNES CARD DOWNLOADED SONGS NOW THERE TRAPED IN MY I TUNES LIBRARY LOL !!! ???

One way friends of mine have done it....use iTunes to burn a music CD with the songs (presuming it can still do that, haven't tried it in a while)
THen close iTunes and open windows media player. Use that to convet the CD file to MP3 (media player's default is to pull things in as wma, so you may need to change the preferences to mp3, or i'm pretty sure wma's work in power points)
Once media player converts the format you can insert it into your powerpoint.

Flash player is getting output sound into BT headset only.

I made some tests using my bluetooth headset. I went to System preferences and changed on sounds, the output to the headset, then i took it back to internal audio device and so, the flash player now is getting no sound output from the internal audio, i just get sounds for the headset, when i watch some movie on youtube i need to use the headset to listening and when i use other programs, iTunes, QT, etc, the sound goes right to external output. On System preferences the output is to the normal audio device, not the bluetooth.
What can i do to correct this?

Up, isn't there anything i can do? Could Mac restore the configuration like Windows restore does?

Roxio Creator 2010 not installing on Windows 7

I recently installed Window 7 Home Premium via a clean install. Have been reinstalling programs as time permits. Had to upgrade to Roxio Creator 2010 as my older version would not work. First attempt at install gave an error stating that the installation had been interrupted. As I recall, it was when the installation routine was trying to install DirectX 9. This doesn't make sense since my computer shows DirectX 12 as being installed. The installation ended.
Subsequent tries at the installation have resulted in stoppages with the message "Setup has determined that your configuration does not support any of the included products".
I have been going back and forth with Roxio tech support without success. Thought that I would try here.
They have told me to uninstall Microsoft.NET Framework 3.5.1, then update both DirectX and Microsoft.NET Framework.
Microsoft.NET Framework (any version) does NOT appear in the "Uninstall or change programs" listing. It does, however, appear in the "Turn Windows features on or off" listing. It was first found to be turned off. I subsequently turned on all of its features. I understand that .NET is 'built-in' to W7. Is that why it doesn't appear in the "Uninstall...." list or do I have a problem there?
I downloaded dotnetfx35.exe and dotNetFx35setup.exe from the MS site. The User Account Control box appears when either is selected. When the "Yes" box is selected, each program appears to terminate without further action. Does this mean that the installation was previously completed?
When I tried the DirectX update, I got a message that I was at the latest level.
Roxio's "Clean Install" routine, their knowledgebase article 000207CR, was performed at least four times under different circumstances without success.

I had the same problem with the install at the point where the Roxio 2010 installer gets stuck on installing Microsoft.Net v3,5 SP1. I went back and forth with Roxio tech support and Microsoft for two weeks. Thanks to my IT background, I finally got Roxio Creator 2010 installed.
Here is the fix:
1.   Go to http://www.microsoft.com/downloads/details.aspx?FamilyId=333325FD-AE52-4E35-B531-508D977D32A6&displaylang=en and download "dotNetFx35setup.exe". Save it to your desktop.
2.   Go to "Turn Windows Features on or off" Deselect Microsoft.net 3.5 SP1.
3.   Then right click on the Roxio Digital downloaded file and choose the Compatibility mode tab.
4.   Change the Compatibility mode to "Windows Vista (Service Pack 2)".
5.   Use an unpacking program such as "WinRar" to Unpack the Digital download to a specific location.
6.   After unpacking, go to unpacked folder location "RoxioCreator2010".
7.   Then open the folder "DOTNETFX_351" and go to folder "wcu" and open the folder, go to folder "dotNetFramework" and open the folder.
8.   Replace the file "dotNetFx35setup.exe" you downloaded with the file in this folder.
9.   Then right click on the file "dotNetFx35setup" and change the compatibility mode to "Windows Vista (Service Pack 2)".
10. Now run the Roxio Installer. The installer will take at least 15 minutes or more to finish.
Good Luck!

After connecting my Apple TV this morning, I have no sound. It is hooked up to play through my television speakers. Any ideas on how to get sound? Also, I tried hooking it up through my surround receiver, but could not get it to come up on my ty screen.

After connecting my Apple TV this morning, I have no sound. It is hooked up to play through my television speakers. Any ideas on how to get sound? Also, I tried hooking it up through my surround receiver, but could not get it to come up on my ty screen, what can I do to correct this problem?

Have you tried adjusting the "Audio Out" and the "Dolby Digital" settings in settings > audio and video? It may be worth trying several combinations of these settings, although typically it is the "Dolby Digital" setting that causes most problems for users.
Also make sure that you have correctly mapped the input port on your sound system to the output, if you are unsure about how to do this, refer to the manual that came with your sound system.
Have you tried playing various content sources (i.e. podcasts, music, iTunes Store video, other video etc), do you have the same problem with all types of content? If you use optical you might also check that you can see a red light at the end of your optical audio cable. Is your optical audio cable plugged straight into your sound system, or does it go through a switch or other device?

Can't get sound

Hi,
I own a 22 inch Vizio LCD/FHDTV and I have a mini-DVI to VGA connector and the VGA chord all connected up, so the video is not a problem. However, I cannot get sound even with a RCA cable that connects into the headphone jack of my MacBook. I've tried every input source on my TV and I still can't get audio, and when I do it's incredibly faint even at the TVs maximum volume level. Any help would be much appreciated.

Hello buzzboy7,
my guess - you didn't mention the file format - is that you're trying import an MPEG file, which contains muxed audio. Unfortunately iMovie doesn't accept muxed audio streams.
Find some more info in Dan Slagle's Unofficial iMovie FAQ:
1. Can't hear audio in iMovie when I import an MPEG clip
http://www.danslagle.com/mac/iMovie/tips_tricks/6030.shtml
2. Using Mpeg (DVD) footage
http://danslagle.com/mac/iMovie/tips_tricks/6010.shtml
and also Matti Haveri's website: How can I edit MPEG or convert DVD or MPEG to DV
http://www.sjoki.uta.fi/%7Eshmhav/SVCDon_a_Macintosh.html#edit_convertMPEG
Tools:
MPEG StreamClip:
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
Apple MPEG2 PlayBack:
http://www.apple.com/quicktime/mpeg2/
hope this helps
mish

No sound from HP G62 laptop and can no longer get sound from speakers or headphone jack . USB sworks

have an HP G62 laptop. I can no longer receive sound from speakers or from headphone jack. If I plug speakers into usb - I will get sound. Any ideas?

I don't think I have anything to offer that you haven't done. In Device Manager, Device status says "working properly" and you've reinstalled this driver.
Realtek Audio Driver for Windows XP
Right?
The only other thing I know to do is restore the hard drive to its original factory fresh contents.
-Jerry

How do I get sound to play on my Samsung HDTV from my macbook pro?

I've been trying to figure out how to get sound to play on my TV from my laptop for several days now and was wondering if anyone had any suggestions for a solution to this. I bought an Mini Display Port to HDMI converter (Kanex Iadapt) off Amazon that is supposed to have audio support. I connected it with the HDMI cable to my TV and changed my display settings to mirror and the picture comes up fine but when I tried to change the output in sound settings to my TV my TV didn't even come up as an option. I went out and bought a Y audio cable figuring my laptop may be older than 2010 and needs an additional cable, plugged the audio cable into the same HDMI outputs in the TV and still no sound. I can't think of anything else!

I have an ancient LG 32" and a Thunderbolt/miniport-HDMI adapter that I bought from monoprice. I go through my Denon receiver through one of the HMDI ports and get sound and video on my TV. This is the one I bought - it carries audio and video and is under $7.
Could be worth a shot...
Clinton

Getting sound into roxio creator 9

Similar Messages

Maybe you are looking for