Getting SQL Error in BOBJ during SAP R/3 to XSD conversion
Hi ,
i an new to BOBJ, and doing some testing conversion from SAP database table to XSD i am getting follwoing error please help me to sort out this issue
13852 9292 RES-020148 03/08/2011 10:05:38 Query <Row> either selects from no object at all, or its SELECT produces <5> columns while the query output schema specifies
Thanks
Amit
Edited by: Amit Shivhare on Aug 3, 2011 4:36 PM
Hi,
then I would suggest you post your question into the EIM related forum.
regards
Ingo Hilgefort
Similar Messages
-
Internal error (-5002) occured during sap B1 version updation
Dear Experts
Internal error (-5002) occured during sap B1 version updation from SAP B1 2007B to SAP B1 8.8
Please help
S K JanaHello
You may take a look into the upgrade log file:
C:Program FilesSAPSAP Business OneLog directory,
filename should be
B1UpgradePid[xxxx]_[YYYMMHH.....].txt
You can find information inside !
If the upgrade failed, please check this file, look for notes, or report the issue to GSC.
Regards
János -
SQL error 9002 while Login SAP
Hi All,
Today we were upgrading ABAB and BASIS support pack . while the proccess was going we had an error "SQL error 9002 transaction log is full" after that session got terminate . now we unable to login SAP . We are getting this message "SQL error 9002 transaction log is full" at time of login . Now how do I login SAP and clear the transaction log. what is the solution of this problem .
Thanks in Advance
Jitendra SinghHello Jitendra,
whenever you usually do such type of basis tasks like patch upgrades and all it is preferable to switch off the logging so that transactional logs doesnt increase
I would recommed you to go to SQL server studio and change the automatic logging to simple...then you will not face any issues of transactional logs
but remember after your work is over switch automatic logging to full
Let me know of any questions
Rohit -
Hi,
Two month before, We have deployed Lync 13 set up with lync monitoring and archiving service enabled. After configuring we have the Lync monitoring and archiving services are working fine... few weeks back I have changed the Admin Password
of the Lync Setup. After that Lync Monitoring and Archiving services are not working.
when I try open Lync monitoring service from web UI,
http://localhost/ReportServer_LyncMonitoring/
Web UI is opening but Reports home page is not Accessible , Getting error Like
"An error has occurred during report processing. (rsProcessingAborted)
Cannot impersonate user for data source 'CDRDB'. (rsErrorImpersonatingUser)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
The user name or password is incorrect"
Please help me to trouble shoot this problem.
Thanks,
Rajarajan.DHi Rajarajan.D
You probably need to update the password against the CDRDB datasource in SSRS Report manager, take a look at this article: http://lyncme.co.uk/microsoft-lync-server-2013/cannot-impersonate-user-for-data-source-cdrdb-rserrorimpersonatinguser-error/
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
Georg Thomas | Lync MVP
Blog www.lynced.com.au | Twitter
@georgathomas
Lync Edge Port Check (Beta)
This forum post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Getting An Error while connecting to SAP :InComplete logon data
Hi
I trying to get the tables of SAP using Sapproxy class ,but enable to get the table from SAP Table..
and also using SAP Connector 2.0.1 to connect the .net ,I got the SAP function and I write the code for it but enable to get the data in from the SAP
I am binding the data to the data grid
it is displaying the error like:
SAP.Connector.RfcLogonException: Incomplete logon data.
How to fix the problem ? suggestion please
Thanks1.check your hibernate.cfg.xml file and make sure you use "xwiki/xwiki" as the username and password.
2.make sure you have create "xwiki" tablespace in your oracle db.
B.R
Han -
Getting the error while connection to SAP Server
Hi,
I am getting the below mentioned error while connection to SAP Sever using SAP.Net Connector. What could be the possible reason?
"<i>
<b>Connect to SAP gateway failed
Connect_PM GWHOST=ia2-ms.boi.hp.com, GWSERV=sapgw01, ASHOST=ia2-ms.boi.hp.com, SYSNR=01
LOCATION CPIC (TCP/IP) on local host
ERROR partner not reached (host 15.78.80.31, service 3301)
TIME Fri Feb 02 11:10:35 2007
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -10
MODULE nixxi_r.cpp
LINE 8716
DETAIL NiPConnect2
SYSTEM CALL SiPeekPendConn
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER</b>
</i>"Hi
The gateway monitor is used to analyze and administer the SAP Gateway from outside the SAP System. The profile you assign to it must be the same as for the gateway. This process has different names:
UNIX: gwmon
Windows: gwmon.exe
more on this.. please go thru ..
http://help.sap.com/saphelp_erp2005vp/helpdata/en/bb/9f13c24b9b11d189750000e8322d00/frameset.htm
hope this info helps!
with regards,
raj.
<i>pls, award points</i> -
Migrating from Sql server get SQL Error: ORA-00936: missing expression
All,
I'm migrating from Sql Server to oracle 10g and I'm getting a
"SQL Error: ORA-00936: missing expression" error
when the following create table statement is executed. It appears 10g does not like the CREATE DEFAULT xxxx as xxx syntax. Any ideas??
CREATE TABLE EnvCapitalOtherCostAtom (
EnvID CHAR(36) NOT NULL,
CapitalID CHAR(36) NOT NULL,
Seq FLOAT DEFAULT
CREATE DEFAULT D_Set_To_Zero
AS 0
NOT NULL,
AtomID CHAR(36) DEFAULT
CREATE DEFAULT D_NewGUID
AS newid
NOT NULL,
AtomName VARCHAR2(100) NOT NULL,
AtomName_dqa NUMBER(5,0) DEFAULT
CREATE DEFAULT D_DQA_Dflt
AS 10
NOT NULL,
CreatedOnTimeStamp TIMESTAMP(6) NOT NULL,
LastEditedOnTimeStamp TIMESTAMP(6) NOT NULL,
TFDubh_dqa NUMBER(5,0),
record_flags NUMBER(5,0) DEFAULT
CREATE DEFAULT D_Record_Flags
AS 0
NOT NULL,
record_dqa NUMBER(5,0) DEFAULT
CREATE DEFAULT D_Record_DQA
AS 30
NOT NULL
);Hi Chris,
not sure SQL Server accepts the syntax you provided either. Even more I have checked MSDN(http://msdn2.microsoft.com/en-us/library/ms173565.aspx) and they recommend:
Avoid using CREATE DEFAULT in new development work, and plan to modify applications that currently use it. Instead, use default definitions created using the DEFAULT keyword of ALTER TABLE or CREATE TABLE. CREATE DEFAULT will be removed in a future version of Microsoft SQL Server.
In Oracle you should do the same either use DEFAULT in CREATE TABLE statement or in ALTER TABLE, have a look at http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14251/adfns_constraints.htm#sthref626 for more details.
The proper Oracle syntax for your DDL should be something like:
CREATE TABLE EnvCapitalOtherCostAtom (
EnvID CHAR(36) NOT NULL,
CapitalID CHAR(36) NOT NULL,
Seq FLOAT DEFAULT 0 NOT NULL,
AtomID CHAR(36) DEFAULT SYS_GUID() NOT NULL,
AtomName VARCHAR2(100) NOT NULL,
AtomName_dqa NUMBER(5,0) DEFAULT 10 NOT NULL,
CreatedOnTimeStamp TIMESTAMP(6) NOT NULL,
LastEditedOnTimeStamp TIMESTAMP(6) NOT NULL,
TFDubh_dqa NUMBER(5,0),
record_flags NUMBER(5,0) DEFAULT 0 NOT NULL,
record_dqa NUMBER(5,0) DEFAULT 30 NOT NULL
); -
Getting SQL errors with prepared statement in JDeveloper 10.1.3.2
I'm using oracle JDBC driver and I connect and update just fine from the SQL Worksheet in JDeveloper.
1) When I have more than 1 placeholder in my SQL statement, the last one is dropped so I get "Invalid column index".
2) When I add an extra one, it prepares OK but gets "ORA-01745: invalid host/bind variable name" on execution if the placeholder is inside the SQL closing paren (this situation is showed below).
3) When an extra one is outside the SQL closing paren, I get "ORA-00933: SQL command not properly ended"
I'm probably missing something obvious but here is the code I'm using:
public void insertToDB(Comment inrecord) throws Exception {
int idx = 0;
try {
this.initialize();
pstmt = conn.prepareStatement(
"INSERT INTO COMMENTS (COMMENT_ID, " +
"LOG_BUS_PROC_CDE, TYPE_CDE, SUBTYPE_CDE, " +
"REF_TYP_CDE, CREATE_USER, CREATE_DATE, " +
"UPDATED_USER, UPDATED_DATE, COMMENT_TEXT) VALUES(" +
"TO_TIMESTAMP('?','YYYY-MM-DD HH24:MI:SS.FF3'), ?, ?, " +
"?, ?, ?, TO_DATE(?,'MM/DD/YYYY'), NULL, NULL, ? ?)");
pstmt.setString(++idx,inrecord.getCommentID());
pstmt.setString(++idx,inrecord.getLogBusProcCDE());
pstmt.setString(++idx,inrecord.getTypeCDE());
pstmt.setString(++idx,inrecord.getSubTypeCDE());
pstmt.setString(++idx,inrecord.getRefTypCDE());
pstmt.setString(++idx,inrecord.getCreateUser());
pstmt.setString(++idx,inrecord.getCreateDate());
pstmt.setString(++idx,inrecord.getCommentTXT());
pstmt.executeUpdate();
conn.commit();
this.terminate();
catch (Exception e) {
conn.rollback();
this.terminate();
throw e;
}Hi,
actually you increment the index
pstmt.setString(++idx,inrecord.getCommentID());
which means you never have an index of 0 but always start with 1
Frank -
SQL Error 0 during DBACockpit setup in Managed System Configuration
Hi All,
I'm getting SQL Error 0 during DBA Cockpit setup in Managed system configuration. I'm trying to connect MsSQL 2005 from Linux system(Solution Manager 7.1 SP10). I have installed necessary ODBC and microsoft drivers. Any suggestions will be appreciated.
Regards,
PragadeesIf I've understood you correctly, you are trying to setup a remote database connection from an SAP Solution Manager system running on Linux with a database which is NOT MSSQL to a database which is MSSQL running on Windows.
In that case have you checked these SAP notes ?
1265134 - DBA Cockpit: Connecting a remote database
1388700 - SolMan 7.0 EHP1 Database Warehouse for MSSQL
Regards
RB -
Hi all
I am getting Sql error 3113, system logs are below:
i checked tablespaces are having enough space.
can anybody tell what is this prob
SQL error 3114 . Work processes in reconnect status
SQL error 3113 . Work processes in reconnect status
SQL error 3113 . Work processes in reconnect status
SQL error 3113 . Work processes in reconnect status
Operating system call recv failed (error no. 73 )
Perform rollback
Perform rollback
Program RM07DOCS manually terminated by user LINFIN
Call of function NiRead failed, RC: -006
Work process has left reconnect status
Work process has left reconnect status
Terminal 00046 in status DISC
Perform rollback
Delete session 003 after error 004
Error calling the central lock handler
Request (type DIA) cannot be processed
> Unable to reach central lock handler
Request (type DIA) cannot be processed
Request (type DIA) cannot be processed
Request (type DIA) cannot be processed
Request (type DIA) cannot be processed
Request (type DIA) cannot be processedHello,
Well, Is the above error is happening during the offline backup? What is the impact on the system because of the above error? Is any transaction fails?
The above error could be because of the following
1. Network issue
2. wrong client version. If you are SAP Kernel which is compatible with client 9i, then i suggest to install the latest version of the client. Ofcourse client version shouldn't be more than the version of the oracle server software.
3. and there could be other possible reasons like some error in the alert log, resource issue.
Regards,
Madhukar -
dear all,
i have done a system copy from production server into quality server. quality was scrapped and freshly installed with SAP then used the DB flush method to carry out the system copy. i had to change the DBS_ORA_SCHEMA in environment variables to SAP<SOURCE SID> from SAPSR3. the sap version is ECC6.0,DB is ORACLE10.2 on WIN NT.
after MMC opened, i get "SQL error in the database when accessing a table" error is coming. in SM21, I am getting "Transaction Canceled 00 671 ( DBIF_RSQL_SQL_ERROR 20081018130339sibqty_QTY_00 SAPSYS 000 )
Database error 8103 at SEL access to table TBTCO
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
Database error 8103 at FET access to table TBTCP
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
> Short dump "081018 130339 sibqty_Q TY_00 " generated
Transaction Canceled 00 671 ( DBIF_RSQL_SQL_ERROR 20081018130339sibqty_QTY_00 SAPSYS 000
> Short dump "081018 130339 sibqty_Q TY_00 " generated
Transaction Canceled 00 671 ( DBIF_RSQL_SQL_ERROR 20081018130339sibqty_QTY_00 SAPSYS 000
Delete session 001 after error 023
Database error 8103 at DEL access to table TMSALOGAR
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
> Short dump "081018 130432 sibqty_Q TY_00 " generated
Database error 8103 at FET access to table SNAP
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
> Short dump "081018 130432 sibqty_Q TY_00 " generated
Transaction Canceled SY 002 ( SQL error in the database when accessing a table. )
Database error 8103 at FET access to table TSP02"
please find the st22 DUMP:
ow to correct the error |
Database error text........: "ORA-08103: object no longer exists"
Internal call code.........: "[RSQL/READ/TBTCO ]"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
"SAPMSSY2" or "SAPMSSY2"
"INITIATE_JOB_START"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"INITIATE_JOB_START" "(FORM)", or its possible occurrence must be declared in
the
RAISING clause of the procedure.
|
please do me this favor if you know to avoid this problem..
thanks a lot..Hello Anuj,
This is because the COUNT(*) is returning a value which is longer than the INT4 data type it is expecting. If you restrict the selection by introducing a WHERE clause, then you won't get the dump:
DATA: dyn_from TYPE string,
dyn_where TYPE string,
gx_sql_err TYPE REF TO cx_sy_open_sql_error,
gv_text TYPE string.
dyn_from = `DD01L INNER JOIN DD02L ON DD02L~AS4LOCAL = DD01L~AS4LOCAL AND DD02L~AS4VERS = DD01L~AS4VERS`.
dyn_where = `DOMNAME LIKE 'Z%'`.
TRY .
SELECT COUNT(*) FROM (dyn_from) WHERE (dyn_where).
WRITE: / sy-dbcnt NO-GROUPING.
CATCH: cx_sy_open_sql_db INTO gx_sql_err,
cx_sy_dynamic_osql_semantics INTO gx_sql_err,
cx_sy_dynamic_osql_syntax INTO gx_sql_err.
ENDTRY.
IF gx_sql_err IS BOUND.
gv_text = gx_sql_err->get_text( ).
WRITE: / gv_text.
ENDIF.
BR,
Suhas -
Error in BOBJ PLANNING 10.83
Hi All,
I am getting an error in BOBJ PLANNING 10.83
I get the error while saving a dimensions via selecting Save from the Plan menu.
The error states:
Other users are calculating reports or verifying the database, please try again later.
We confirmed that there are no other users in the system by bouncing the database server and the client machine.
Anyone have any ideas as to why we are getting this error?
We installed a new client and still have the old client available.
When we perform the change on the old system the save completes without error.
Purpose of our change is to move users to the new client but before we can we need to resolve this error.
This is the only error holding back the change all other areas of the application are working fine.
Is there a file that maintains state on the client that would cause this issue or a permissions issue?
ThanksPlease post this query to the Other Business Objects Products forum:
SAP BusinessObjects BI Legacy Products
That forum is monitored by qualified technicians and you will get a faster response there. Also, all the queries regarding the product remain in one place and thus can be easily searched in one place.
Thank you for your understanding,
Ludek -
Error while filling aggregates 'SQL Error: 12801'
Hello friends,
While filling aggregates for cube 0SD_C03 i am getting sql error 12801 and error SQL Error: ORA-12801: error signaled in parallel query server P029 ORA-00018: maxim .
Please suggest me a solution .
Regards
Nilesh VakilHi Nilesh,
check:
Aggregate issue
Problems with BITMAPINDEX under ORACLE in BW
SAP Note Number: [159779|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_sys/~form/handler]
No 'Star Transformation' for a Hierarchy Changerun
SAP Note Number: [934281|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler]
Regards
Andreas -
Connect failed with sql error 1004
Hi ,
I am getting an error while starting the SAP.
error in DEV_W0 file :
CONNECT failed with sql error 1004
OCI-call 'OCIsessionBeging failed RC = 1017
Can some one help me with this.
Thanks in advance.
KiranHello Kiran,
Can you post full contents of dev_w0 logs,there must be a ora error also written there.?
What I assume is there is a problem with op$ or sapr3 user while connecting to oracle
If that is the case refer to note 400241,you will find the solution
Rohit -
We have a weird situation we're trying to troubleshoot for quite a while: We have multiple .vsd files stored on our network in DFS shares.. We have multiple users who cannot open the files, when they try by navigating to the file and double-clicking it,
they get "An error (1502) occurred during the action Open. File not found"
However, if they copy and paste the file to the same exact network folder, THAT file they can open with no problem!
The problem is very bizarre. I've checked obvious things such as file/folder permissions, versions of Visio installed, things in common between people who can and can't open the files.. I even did some testing today with some strange results...
Windows 7 x64 machine with Visio 2010 Pro installed (x86):
1. Opened file by double-clicking it in explorer, "Got the 1502 error"
2. Tried it again, this time I just get "File not found"
3. Opened Vizio, did a File --> Open --> navigated to the file and opened it that way... 1502 error.
4. Copy/pasted the file into the same folder where it's stored, then double-clicked the copy and it opens fine.
5. Closed the copy, tried to open the original, still get file not found / error 1502.
The file does exist, it IS there.. sometimes the user just copies it to their local desktop (well, it's not really local, it's redirected) and it opens fine there.. other users email themselves a copy of the file and then open it that way.. it works for
some, not for others.. and there's no discernible pattern yet to identify who this is affecting. Anyone have any ideas?
-Keith
-Keith ElkinHi,
Based on the error message, the issue may be caused by the Visio file is occupied by some other program in DFS.
>>4. Copy/pasted the file into the same folder where it's stored, then double-clicked the copy and it opens fine.<< If you did this step, the Visio file would rename in the same folder, like file1.vsd. Thus, it opened well.
Thus, I recommend you check the file's status in computer management in DFS server, see the below image:
If the affected Visio files were occupied, please try to clean them(right click>close the file) to test.
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Sorry,
This didn't help, the files are not open, locked open, and the issue still persists. Any other suggestions?
-Keith
-Keith Elkin
Maybe you are looking for
-
SQL query problem while combining two values.
Hi, I am having a table test with columns X and Y. X is not nullable where as Y is nullable. I had a requirement where I have to get these two values seperated by '-' (Hyphen). So I wrote the query like : Select X||'-'|| Y from test. But now Y is nul
-
Queries on CPU and PSU Patches
We are on 11.5.10.2 and 10.2.0.4.We need to apply CPU and PSU patches. 1.When we apply the latest CPU patch does it mean it will apply all previous cpu patches on Both application and DB. Means does it mean CPU's are cumulative. 2.What is PSU patch a
-
I am new to Solution Manager but have taken it on in order to help my project team implement some of its components; one being Document Management. Is it possible to create your own folder stucture for DM? Right now, and I don't know if it is because
-
Share Point 2013 - User Settings not initialised
Hi there, We are using the SharePoint 2013 server on top of Windows 2012. We've recently created user profile application service and activated the Site Feed feature. After that one of our users experiences an annoying thing, she is being redirect
-
I'm trying to update Firefox on my Macbook Pro, and it says I don't have sufficient priviledges, and I don't know how to fix that!