Getting Started PDF with V3 images

Hi Guys
We supply all our clients with a BC pdf document made a few years ago called "Getting Started Guide". I note that there is no new guide and a lot of the content on the Knowledgebase still references V2 menus. I really want to give clients a tailored PDF rather than get them looking at the KB and seeing a lot information that is not necessary. Has anyone made a V3 guide they want to share?
Kenton

+1 - This is a big miss for me. Having to explain that our GSG is being updated as we onboard new clients puts a ***** in our armor that I'd rather not have. I'm not against creating my own, but a sanctioned copy would be nice. Any ETA, ABC friends?

Similar Messages

  • Where do I find the Getting Started pdf

    I keep seeing RTFM but I can't find TFM. I'm looking for the Getting Started pdf that I keep reading about but it can't find it on this site and its not on my install DVD.
    Thanks

    Hi there,
    Go to this page and type in "logic express" (with the quote marks). There isn't, as far as I know, a manual called Getting Started with Logic Express but you will find Reference, What's New, Plug-ins etc. The Gettign Started book is for Logic Pro but it will certainly help with the early days in Logic Express
    http://www.apple.com/support/manuals/
    Have fun!
    Pete

  • Using Getting Started VI with HP54845 scope

    I'm trying to run the supplied "Getting Started" IVI with the Agilent HP54845 scope that is included in the download package for the hp548xx device. The instrument input is GPIB::7::INSTR and the Initialize with Options portion of the subVI returns an OK when run. The series of VIs in the subVI "hp548xx Acq Wfm Edge Triggered" also return OK values up to the "Read Wfm" VI. I then get a timeout error (Error number BFFF0015). Am I using the wrong instrument handle and, if so, what is the correct handle. This is the default format when I create an input to this "Read Wfm" VI. The Plug & Play VIs work for this device and I am able to display scope traces in LabView when I use the supplied P&P VIs so I am able to talk to t
    he device.

    Probably the most common reason for timeout (BFFF0015) in an oscilloscope read waveform is failed trigger event. Most likely the Getting Started VI uses edge triggering. Check the edge trigger level setting and verify that it is set to be within the range of your expected signal.

  • [Forum FAQ] Get started quickly with the Visio 2013 trial

    Recently, some customers encountered the problems when trying to download the Visio 2013 Trial via TechNet Evaluation Center. Generally, we can download and install Visio Professional 2013 trial by the following steps:
    1. Click “Get Started Now” on
    http://technet.microsoft.com/en-us/evalcenter/hh973399.aspx
    2. Fill out the online form and choose the right version of the software.
    3. Save your trial key. Once signed in, you will receive a trial product key along with an option to download the trial package.
    Please note:
    32bit and 64bit version has different product key.
    Make sure you have choose the desired language before you click “Download”

    Or, you can also click the download URL to download it directly.
    Note:
    The TechNet trial of Visio 2013 is no longer to be downloaded as .img format, it has changed to .exe format. We can install it directly.
    Troubleshooting
    Can’t open the download link or get 404 error
    We'd better check the IE's settings, try the following steps:
    1. Install the latest updates.
    2. Clear your browser's cache.
    3. This issue is related to permission, you may run IE as administrator for a test.
    4. Ensure that the Internet Explorer security settings are not set to high. Also disable
    enhanced protected mode.
    5. May be one of your add-ons that causing this. Manage add-ons in Internet Explorer: 
    http://windows.microsoft.com/en-us/internet-explorer/manage-add-ons#ie=ie-10-win-7
    6. You could add these addresses to the browser's list of Trusted sites. To do this, click
    the green tick and then the button marked Sites, and paste an address into the box that says "Add this website to the zone.
    7. Also temporary disable or uninstall the security software such as anti-virus software
    to see whether the issue occurs.
    No response after clicking the download command with IE
    Make sure we have chosen the language version.
    Make sure you've not set block the pop-up windows in IE, because we need to install the "Akamai NetSession Interface" add-on.
    Can’t find the download file
    The TechNet trial of Visio 2013 is no longer to be downloaded in .img format, it has changed to .exe format. We can install it directly. Please find the exe file with the
    following names:
    32 bit: VisioProfessional_x86_en-us.exe
    64 bit: VisioProfessional_x64_en-us.exe
    Can’t get the trial key
    Run IE as administrator
    Check the IE add-ons (http://windows.microsoft.com/en-us/internet-explorer/manage-add-ons#ie=ie-10-win-7)
    Add these addresses to the browser's list of trusted sites
    Clear your browser's cache
    Change a browser (Such as Firefox, chrome. Eg)
    To see the previous Blog, go to
    http://blogs.office.com/2013/10/07/get-started-quickly-with-the-visio-2013-trial/
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

  • What hardware, software, etc. is required to get started developing with iOS?

    What hardware, software, etc. is required to get started developing with iOS? Looking to get started...
    Thanks!

    You need an Intel Mac, at least OS X 10.6.8 (Lion if you intend full capability) and Xcode.
    See http://developer.apple.com/

  • Why can I not get a pdf with images work with quick look in the ipad

    Why can I not use the Quick Look function when I view a pdf with images, on my Ipad?

    Try install the free Adobe Reader app
    http://itunes.apple.com/sg/app/adobe-reader/id469337564?mt=8&ls=1

  • Error "Failed to Export PDF" with big image on CS6 (32) and CC (64)

    Hi everyone,
    I'm on indesign CS6 (v8.0.2) and when I try to export pdf with a very big image ( *.tiff, 25000*35000 pixels, ) , the action failed with this message :" Failed to export a PDF".
    To be sure that there is no any corrupted elements, I made a very simple layout (one page , and just one element for my image,I turnoff prefilgth and all  ressource intensive options, and export with no downsampling or resampling) and try to export with different size image:with 20000*30000 -or smaller -image the export works, always failed with image .The export failed to in scripting mode.
    If I diveded my image in four , the export works but this solution is not convenient (I actually made tests for a fully automatised process, and we want to be sure that the indesign  component is  enough "safe")
    I try the same action with an evaluation version of indesign CC 64 bits (v9.2) and have the same behavior.
    I can imagine that there is a memory issue there, but my config seems to be strong ( windows server 64 with  16GB ram, DD with more than 100GB free). I don't undersant why-in a "full" 64 bit environnement- it is not possible to manipulate and export very large image ?
    I'm wonder If the background task is a part of the problem, and if it 's possible to disable it in CS6 or CC as in cs5 ( creates an  “DisableAsyncExports.txt” file in  Adobe InDesign executable directoty don't seems to disable it  in CC or CS6).
    Thank you for your help and good ideas..
    DC.

    this is a .tif (not a "big"tiff) compressed in LZW or ZIP.
    I just tried with another format (png), the error is the same...

  • Create a PDF with multiple images per page

    So this seems really simple, but i cannot figure it out... i am creating a PDF from 30 JPGs and rather than having an image on each page in the PDF I would like to set it up so that there are 6 images per page... any thoughts .. thanks in advance
    cheers
    matt

    Once you have the PDF with a single image per page, print it out to a new PDF with 6 pages per page.
    Either that, or use an authoring application like Word or InDesign.

  • 3D PDF with printed image shrinked

    Hi, recently I am testing the usage of 3D PDF for a project. Let me take a example: http://www.pdflib.com/fileadmin/pdflib/Cookbook/pdf/javascript_for_3d_animation.pdf
    It is a pdf file with 3D image on the right of the page. I first stop the animation and then zoom the 3D model until it touches the boundary of the 3D window. Like this: http://postimg.org/image/s3wd4g72b/
    Next, I tried to print it. At the preview, it looks okay. However, the printout of the image in the 3D window is somehow. Like this: http://postimg.org/image/pizz84tst/
    May I know the reason and what should I do so that the size of the 3D model printout will be the same as that shown on the screen? Thanks very much.

    I am experiencing the same problem too. However, I am not sure about whether the source of problem comes come whether the model is the volumetric shape or not. Because in my example, I always use closed meshes to export in .u3d format as a component to generate the pdf file. Here is the example for illustration:
    https://hotfile.com/dl/255656780/62855a4/Template.pdf.html
    On the screen, I move the spheres in such a way that the red and green spheres are partially shown: http://postimg.org/image/mb8erlkfn/
    But just like situation mentioned by the user "My Screen Name", the printout shows the visible parts of the red and green spheres completely:http://postimg.org/image/c4liqfy6p/
    Is there anything we can do to ask acrobat to print exactly the size we adjusted on the screen? Thanks.

  • Three Getting Started Questions with RV180

    I recently purchased the RV180 router. I have a few quick "getting started" questions about using it:
    1. Is the "Static DHCP" the screen I need to use in order to reserve DHCP addresses (see attached)? That's where I've been reserving all my DHCP addresses with. I'm just making sure I have the correct screen.
    2. Do I need to do anything to "backup" my configuration, or will my settings still be around when the RV180 reboots?
    3. Do I need to run a check for firmware update on the RV180, and how do I update the firmware on the RV180 (as well as the SG200-18), or does it usually come with the latest firmware out-of-the-box? If I go ahead and put a service contract on the RV180 and SG200-18, will I receive my firmware updates automatically? Are the part numbers for the service contracts the same for the RV180 and SG200-18?
    Thanks!

    Hello,
    1. Is the "Static DHCP" the screen I need to use in order to reserve DHCP addresses (see attached)? That's where I've been reserving all my DHCP addresses with. I'm just making sure I have the correct screen.
    Yes, that is the correct location to set DHCP reservations.
    2. Do I need to do anything to "backup" my configuration, or will my settings still be around when the RV180 reboots?
    Whenever you hit save after making a change you configuration is saved and will survive a reboot.
    If you would like to save  backup copy of your configration file just go to Administration >> Backup/Restore settings.
    3. Do I need to run a check for firmware update on the RV180, and how do I update the firmware on the RV180 (as well as the SG200-18), or does it usually come with the latest firmware out-of-the-box? If I go ahead and put a service contract on the RV180 and SG200-18, will I receive my firmware updates automatically? Are the part numbers for the service contracts the same for the RV180 and SG200-18?
    You will need to manually update the firmware on the RV180.  That firmware is available here:
    RV180 Firmware
    It is simply one file, that you upload under Administration >> Firmware Upgrade.  There is no bootcode for the routers (like there was with your switch)
    You can locate this in the future the same way you did the SG200 firmware (because this link may change) on the Cisco website.
    As for the service contract, the part number for both of those devices will be CON-SBS-SVC2.
    Hope that helps, and I will try to get to your other questions sometime today as well.  Also since you just bought there you are of course welcome to call in and get some support over the phone, both your devices do come with 1 year of technical support, and it sounds like you are getting or have contracts, so I guess make that 3 years.
    Cisco Small Business Support Center Contact Numbers
    Thanks again for choosing Cisco,
    Christopher Ebert - Advanced Network Support Engineer
    Cisco Small Business Support Center
    *please rate helpful posts*

  • Making a PDF with an image that has both spot colour channel and alpha channel

    Hi I have a logo that was supplied to us as a PSD it has a transparent background, it also has a pantone colour channel. I have made a alpha channel from the transparent background as well.
    The graphic looks fine in InDesign (alpha channel selected in the import options), ie the background is transparent.
    But when we try to make a Hi Res PDF the result is that the graphic is on a solid white background.
    If I go back to the PSD and merge the spot channel with so that it is just CMYK and try again the PDF is fine, but we obviously loose the spot colour.
    How do you make a PDF with a transparent PSD that has a spot colour?

    You know that annoying response from support staff? "We cannot replicate your issue". Well....
    I created a PSD in CS5, with a bunch of process stuff, then loaded a spot color channel and painted in some pawprints using Pantone 172C:
    Saved this as a PSD file, default settings (maximize compatibility on, but it doesn't make any difference in this situation).
    Created a new InDesign document in CS5, added a gradient and some text, then placed the PSD.  ID understands the PSD has an inbuilt background so there's no need to bother with a dedicated alpha mask:
    Exported from ID using the High Quality Print option (PDF/1.4, which keeps the live transparency):
    Re-exported to PDF/X-1a (based on PDF/1.3 which flattens transparency) - looks exactly the same. In all cases the spot channel is intact and the see-through regions of the PSD are maintained.

  • When I "save page as" I also get a folder with gif images, jscript script files and other similar items. how can I stop this.

    When I "save page as" via the file button at the top edge of the page, I also get a folder containing gif images, jscript script files and other similar items. I am not is allowed to delete it unless I also delete the page I need. How can I stop this from happening. is it the way I've configured firefox perhaps.
    == since I installed firefox

    Make sure that you have selected "Web Page, complete" to save the page.

  • Any way to create a PDF with an image field or insert an image?

    Hi. I'm using CS3 with Acrobat 8.1 Pro on a Mac. We're trying to create a one-page PDF that we'll save and users on a PC can open up and add text fields to, as well as an area where they can insert an image file (their logo). The source file is created in Illustrator. Would we have to create a document through Acrobat with these fields available to them in their version of Acrobat or Reader (where they can add their own content), or is there another way? Not sure how to best go about it, if it's at all possible. Thanks.

    dromanellTUTOR wrote:
    Hi. I'm using CS3 with Acrobat 8.1 Pro on a Mac. We're trying to create a one-page PDF that we'll save and users on a PC can open up and add text fields to, as well as an area where they can insert an image file (their logo). The source file is created in Illustrator. Would we have to create a document through Acrobat with these fields available to them in their version of Acrobat or Reader (where they can add their own content), or is there another way? Not sure how to best go about it, if it's at all possible. Thanks.
    I don't think there is any particular requirement for Content although, you will have to play with the size of the fields to accomodate the size of the logo. if you want to send out over a web page then have them download, and email.
    you will have to go to advanced menu and choose Extend Features in Reader. this will allow the item to be downloaded, filled out, saved and emailed.
    NOTE: There is a limitation of no more than 500  returned pdfs.
    Adobe has special service that allows you to do this unlimited however; It cost about the same as a Lincoln Towne Car fully loaded, per year.  If your a Fortune 500 company its peanuts. But for the rest of the world its out of range.
    I guess the reson its so expensive, is that its not used that much. on the other hand, if they would get price down to 250-500 bucks per year, everyone could use it.
    However; this limited rights thing they have come up with is good for Non-profits and small businesses that just need something on a small scale.

  • Creating a PDF with Transparent Images

    Hi,
    Here is my problem:
    I am using Acrobat 9. I design posters in another program. I print to PDF.
    I design the poster and must put a logo in it with a transparent background. Note: If the poster background is white I never have any problems.
    This poster has a pink background and hence I have to put the logo into the poster in a graphic type of gif or tiff or png to maintain transparency.
    All is fine in my design program - transparency is fine etc.
    I print to PDF (Acrobat 9.0) and the dreaded white box occurs. Note, I put an old version of the logo, one I cannot use, and it maintained its transparency fine. So this means that some gif files Acrobat 9.0 keeps transparency and some it does not.
    So, in summary, I have tried all types of file formats gif, png, tiff and all types of programs to remove the logo background and save as one of the later formats and NONE maintain the transparency in the PDF output.
    I have even tried saving the whole poster as a jpeg - but the quality was too poor to print.
    I have used Word, Photoshop, MS Photodraw, Elements etc.
    I have no idea why a gif I have from years ago works and one that I am creating now maintain their tranparency in the PDF.
    I am under a deadline and am VERY worried this will not get done.
    I am immensely grateful for any help - I have been at this for countless weeks and hours...
    Thanks,
    Elisabeth

    I am using MS Publisher and even Word 2010 for poster design and have used multiple programs (and multiple formats that support transparency)  for logo editing - removal of background - Photoshop, etc.
    I place logos, both gifs, with transparent backgrounds in a document and print PDF and one or none will show transparency - it makes no sense at all.
    Most of the time the background is a white block. It couldnt be more frustrating.
    It is a simple document/poster with just a few words of text and a logo...
    Are there settings in Acrobat 9.0 that need to be turned on that I am missing. I had no trouble with Acrobat 7 - it worked EVERY time.
    I was on  with tech support for 5 hrs and there was no knowledge of this - he just wanted to reinstall 7.0 which did not work.
    Need ideas - overprinting is on. I noticed that flattening doesnt allow me to pick transparent objects - have no ideas if I am even on the right track.
    Have read everything I can find online regarding Acrobat 9.0, PDF creation and transparent logo backgrounds.
    Sooo grateful for any help!
    Thanks,
    Elisabeth

  • PDF with a image holder for extracting/adding data ?

    Hi,
    everybody I managed to find a way to add a text field in a PDF file but I cant find a tool to add a regular data field just for images like .jpg or .eps or some other like that.Can anyone help me please thank you in advance.

    Sorry for taking so long, I am still waiting for a paycheck from Adobe! It must be based on your registration fee.
    Try LiveCycle Designer. It is XML based and has the necessary code to import images.

Maybe you are looking for