Getting Started with Boot Camp

I have a Compaq PC with OEM installed Windows XP Media Edition that I'd like to replace by using Boot Camp with my new 27"iMac running OS 10.6.2. What can I use, if anything, from the PC and what do I need to buy from Microsoft to get to running Windows 7 on the iMac. Thanks -
Bob Moran

But it seems only a Windows 7 "Upgrade" is available and I don't have anything on the Mac and only XP on the old PC to upgrade. I have a feeling I'm demonstrating the depth of my PC ignorance having only used the old PC for things like Garmin map installs and ring tones.

Similar Messages

I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).

I need to know which update(s) I can apply to help stabalize the system.

Typing the body of the thread message in the title, huh? -)
I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).
Only Apple could hamstring and tie Mac OS to Windows. There isn't any other than whether you can download the drivers into Windows (you can) but Apple puts a block on the installer setup even if your mac does not support it.
Windows 7 needs at least Boot Camp 3.1 and 3.3 is what you should already have. And you are not getting security updates if you don't have at least 10.6.8 as was pointed out. --- you arent using Software Update as you should. And you should backup and clone Mac (and Windows) as well.
You need Mountain Lion to use Boot Camp 5.x which supports Windows 7 & 8 and 64-bit.
I would upgrade to Lion if you can realizing that Rosetta and PowerPC are no longer supported though.
Mac 101: Using Windows on your Mac via Boot Camp
https://support.apple.com/kb/HT1461
http://www.apple.com/support/bootcamp/
Helpful Apple Support Resources (Forum Overview)
Boot Camp Support
Boot Camp Manuals
Boot Camp 5.0 Drivers
http://support.apple.com/kb/DL1638
Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdfcreate a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/
Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
Yes, you can download the Boot Camp 5 Support Software here.
http://support.apple.com/kb/DL1638
How do I use the Boot Camp 5 Support Software I downloaded from the web page?
The download file is a .zip file. Double click it to uncompress it.
Double-click the Boot Camp disk image.
Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
When your system restarts your Windows 8 installation is done.
Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software.
How do I format USB media to the FAT file system?
Use Disk Utility to format a disk to use with a Windows computer. Here's how:
Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
Open Disk Utility.
Select the disk you want to format for use with Windows computers.
Click Erase, and choose one of the following from the Format pop-up menu:
If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
If the size of the disk is over 32 GB, choose ExFAT.
Type a name for the disk. The maximum length is 11 characters.
Click the Erase button and then click Erase again.
Which versions of Windows are supported with Boot Camp 5?
64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support, click here.

How do I "get Windows" to install with Boot Camp

I never, ever thought I would have to utilize Windows ever again, but the real estate industry is so outrageously hostile to the Mac platform, most or all of the industry software and websites ONLY run with IE on Windows. So I'm f'ed. But I don't know much about Windows. What is the latest version? I heard Vista is really crap? Is XP better? My man question though is:
According to the Apple site, all I need to do is "get Windows" and install it through Boot Camp. On the Microsoft site under "Buy", they funnel you straight into buying a whole PC in order to get Windows. I can't find anything about just buying a copy of the OS.
Would appreciate some basic clarification on getting started with this subject...
Thanks!

Hi Christopher,
first for clearance: your signature states a G5 dual 2GHz. Is this still correct ?
Because BootCamp only works on Intel-Macs not on PPC-Macs like yours !!
Bootcamp itself is merely a helper application which sets the Mac up so that Windows can be installed.
For a Windows installation you have to have/buy a Windows XP Home or XP Pro with Service Pack (SP) 2 or 3 or a Windows Vista Home / Business or Ultimate.
These can be found at Amazon or Newegg for example.
You can not use so-called Upgrade-discs and manufacturere-branded OEm-disc (from Dell, Hp or the like).
You can use so-called System-Builder discs.
Personally for your use XP would be my first choice, since Vista is for my a 'Nice Try' but not more.
If you can wait a little bit, the I would propose to get Windows 7 which should be out later this year, since it's the Vista that Vista has never been.
Apart from BootCamp there are Virtualization applications like Parallels, VMWare Fusion and VirtualBox which would better suit your needs, since they allow you to run Windows while still be in OSX, whereas with Bootcamp you have to restart your Mac in order to run Windows.
http://www.parallels.com/products/desktop/
http://www.vmware.com/products/fusion/
http://www.virtualbox.org/
For these you also have to have/buy a Windows license/CD.
Hope this helps.
Stefan

Installed windows 7 with Boot camp and now cannot get back to OS x x

Have installed Windows 7 with Boot Camp on a 20" 2006 iMac running X 6.8. Now cannot get back to original OS. Tried Snow Leopard in drive and holding c and various other keys at start up but still Windows. Any ideas?

Boot Using OPTION key:
1. Restart the computer.
2. Immediately after the chime press and hold down the
"OPTION" key.
3. Release the key when the boot manager appears.
4. Select the disk icon for OS X.
5. Click on the arrow button below the icon.

Need help with Boot Camp and Win 7

I have iMac 27" (iMac11,1) 2.8 GHz, quad core, 8MB of L3, 8GB of Memory, Boot ROM Version IM111.0034.B02 and SMC Version 1.54f36 and can't get this machine to run Windows 7 using Boot Camp. I have successfully loaded Win 7 but when it claims to be starting I only get a black screen after initial start up.
I have checked and rechecked my software updates and have read and reread the instructions, however, I can't update my Boot Camp to 3.1 (my machine says i'm running 3.0.4) and I need 3.1 but can't load 3.1 because it is an exe file that has to be loaded into Windows after I load Windows but can't open Windows because I can't load Boot Camp 3.1. That's my excuse anyway, so I'm missing something I just can't figure out what it is....this is where you come in!
Thanks.
Mike

Mike,
I'm not going to be much help with Boot Camp however I can direct you to the Boot Camp forum where there are more people that know how to troubleshoot it and Windoze 7. You can find it at:
https://discussions.apple.com/community/windows_software/boot_camp
Roger

Windows 7 64-bit with Boot Camp 5: keyboard & mouse don't work

Running OS-X 10.8.5 on iMac 27 Late 2013. Everything goes smoothly installing Windows 7 64-bit with Boot Camp 5.0.4 until Windows does its final reboot (after a complete, apparently successful install), and begins the Windows setup sequence. The first setup screen asks for User name and PC name. My mouse and keyboard do not work at this point. Tried cold rebooting: Windows boots up, detects it needs to do first use setup, and gets to same failure point.
NOTE: I have never had a chance to install the Windows support drivers; but the mouse and keyboard worked through out the istallation.
I've tried two different W7 versions: 64-bit Pro and 64-bit Enterprise [Enterprise is not supported, but I have installed it on an iMac 27 2010, and a MacBook Air 2013.]. Both versions of W7 hang at the same point described above.
I've tried a Windows DVD install disk plus Windows support drivers on a flash drive; and I've tried a bootable flash drive with everything on it. Both fail at the same point.
I have tried both wireless and USB keyboards and mouse. Same failure.
I have even tried removing the flash drive with Windows support drivers before the final reboot. Same failure.
NOTE: when I reboot in OS-X and go to the Startup Disk, the windows option says "Untitled Windows" instead of Boot Camp; but I can select it, and it starts the Windows boot which ends up at the same Windows setup failure point.
Has anyone had the same problem?
Has anyone succeeded? If so, any special actions or ideas?

The issue may be related to the iMac 2013 only having USB 3.0 ports and that windows 7 does not come with drivers for it. Try the following (borrowed from answer on Mac Rumors Forums http://forums.macrumors.com/showthread.php?t=1659481):
<quote>
If you run into issues with keyboard and mouse not working (due to USB 3.0 and Win 7 incompatibility), you need to run your Win 7 partition (and Win 7 installation disk/partition) in legacy mode. (I found this information at:http://twocanoes.com/winclone/support#faq123 - see "Method using Terminal"). Here you will be setting the legacy on the installation volume of win 7, not bootcamp partition (yet). After running the diskutil list find the volume with installer of Win 7, and then run the command (substituting the disk1s2 below with the information you find through diskutil on your computer:
sudo /usr/sbin/bless --device /dev/disk1s2 --setBoot --nextonly --legacy
Enter administrative password when prompted. Next, select Restart from the Apple menu. Do not hold the Option key while restarting.
You should have mouse/keyboard working. Begin the Windows 7 installation. Upon first restart right after the installer completes, boot into Mac and set the legacy mode for the BootCamp partition (but this time without the --nextonly flag), so you can use keyboard/mouse to complete the installation and thereafter until the USB 3.0 drivers are installed).
</quote>

Problems with Boot Camp - PLEASE HELP!

I'm having problems with Boot Camp. Here's what's happening. I ran Boot Camp Assistant, partitioning a 32GB BOOTCAMP drive. I insert my copy of XP and start the installation. My MBP restarts and boots into the Windows Setup. I let it run through the initial actions. I press ENTER to proceed, F8 to accept the license agreement, then when I get to the part where I should be able to select the Partition 3 BOOTCAMP drive (as it says in the Apple Boot Camp Manual) there is only a Partition 1 Unknown drive. It is the only drive to choose from and its a C: drive. I can't figure out why after I run boot camp the partitioned drive doesn't appear as an option in the windows installation. Please help!!!
Message was edited by: CarlConti08

Boot into Leo, start Disk Utility and you should see two partitions, your Leo partition and a Fat32 partition of 32GB at the end of the drive.
If not, boot camp didn't create it for some reason. If it is there then check it with DU and make sure its OK.
While your in there give it a name so you can easily identify it in your windows installer.
If there is no partition, create one using Disk Utility at the END if the drive. make sure you create it as a msdos (Fat32) partition and give it a name. The name cannot be more than 11 characters must be comprised of numbers and/or letters (no special characters).
Verify it before exiting DU.
Put in windows install disk, reboot - hold option key after the chime until you see the boot screen - select windows CD to begin install.
Don't forget to install Leo windows drivers after installing windows.
Kj

Problems with Boot Camp, OSX Lion Server 10.7.3, and Windows 7

My new Mac Mini Server is running OSX Lion Server 10.7.3. I want to install Windows 7 as a dual boot. I start up Boot Camp and use an ISO image to create a USB boot disk. I don't seem to be able to use the DVD to install, so I use an ISO image on disk. I continue with the Boot Camp installation, with all three options on the main screen checked. When I get to the part where I have to pick a partition on which to install, the only one I can select, and must format, is the partition labeled BOOTCAMP. But the Boot Camp support software Windows is installed there. I can continue with the Windows installation, and boot into Windows 7 with no problem. But since the Boot Camp drivers were wiped out, I cannot connect to the network, etc. I don't have a Boot Camp control panel either.I did this once before on my other Mac Mini Server I have, running the same OSX Lion Server 10.7.3, and it worked without a problem. I'm writing this message on that copy of Windows. But this new install just will not work, after two days of trying. I *must* get this working. I'm stumped.
CAN ANYONE HELP ??? TIA !!!!

First, this is re-post of your other thread.
Your driverrs were not and will not be "wiped out."
Run Boot Camp Assistant. Download the drivers
Your profile says Lion so that will let you store drivers on flash memory card.
They are never placed where Boot Camp created a partition.

No success with Boot Camp

I have been using VirtualBox with the original release of Windows 7. I thought that I would try out the Release candidate and install it with Boot Camp. I have an internal drive to dedicate to this. So here's what happens.
I have downloaded the Windows os file and burnt it to a DVD using Drive Utility at its lowest burn speed. I am pretty sure that this disk is ok as the windows installer starts up fine.
I created a windows partition on an empty internal drive which shows up on Drive Utility as an NTFS drive. I fire up the Boot Camp app and it asks me to insert the install disk for Windows. The installer starts up and I select the disk, making sure to select the correct one, then select the option to format it. The blue donut whirls around for a few seconds and then I get the following dialogue: "Windows cannot be installed on this drive because of error 0x80300024." I may not have the wording correct but the error code is right.
What does it mean? Can anyone give me a clue where to go from here. Thanks in anticipation.

Still no go!!!
I thought that the DVD I burnt might be faulty, so I tried using the known good one that I used with VirtualBox.
Same result, different error. I got as far as the same screen on the Windows installer. I clicked on the "Format" button, the little blue donut whizzed around for a few seconds again. No dialogue showed up and I thought, success. But when I clicked on the "Next" button, this text appeared with a yellow triangle to the left: "Setup was unable to create a new system partition or locate an existing system partition. See setup log for details."
How can I see the setup log? Other than the DVD, the only other difference between the two attempts was the drive. With this second try, I chose to format the whole drive with Boot Camp, rather than split the drive between Mac & Windows.

I have a problem with boot camp and maybe macbook pro?

I am having issues with boot camp here is what I did.
I attempted to partition for windows then this message popped up after 2 minutes:
Verification failed. this disk could not be partitioned.
Use Disk Utility to repair this disk.
so I used the disk utility to repair the problem then this message came:
First Aid failed
Disk Utility stopped verifying “Macintosh HD” because the following error was encountered:
The underlying task reported failure on exit
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Incorrect block count for file Temp File
(It should be 13 instead of 0)
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume bitmap.
pair",0)
Checking volume information.
Invalid volume free block count
(It should be 23087569 instead of 23087570)
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
So let me explain something. I just got the macbook pro put some music on it and pictures. so what do I do to fix this problem? please let me know.

Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If you are unable to repair the drive then you will need to reformat the drive using Disk Utility. Of course this will erase all your files so have a backup before you start.
Basic Backup
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
7. SuperDuper! (Commercial)
The following utilities can also be used for backup, but cannot create bootable clones:
1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
2. Toast
3. Impression
4. arRSync
Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore. Also read How to Back Up and Restore Your Files.

Problem with Boot Camp - Help!!

Hi everyone,
So I just got a new MacBook and installed Windows XP Home Edition through Bootcamp. I followed the computer certification guidelines of my college (so that I can connect to the network), i.e., I installed Symantec Antivirus and Windows Defender (required), and also Firefox and MS Office, and for good measure, I installed AdAware and Spybot (both free versions). I did not use the internet at all and scanned the totally-unadultered computer, deleting the very few things that popped up on Adaware and Spybot.
However, the very next morning, Windows Explorer kept getting closed by "Data Execution Prevention" every time I tried to start Windows. (It says, "Instruction at 'Ox8bb9ed475' referenced memory at 'Ox8b9ed465'. Memory could not be 'written'".) Essentially, I can't use Windows and no amount of restarting remedies this.
I took my MacBook to the Genius Bar at an Apple store and they said the problem was most likely Symantec Antivirus - apparently, Symantec has lots of problems with Bootcamp; they also recommended using Parallels instead. But since Penn requires Symantec to certify a computer, I don't know what to do about this (not to mention Windows won't run anyway)! To be sure, the Apple guys were very rushed and seemed to be speculating, so I'm not sure how to take their advice.
Does anyone know what might be wrong? I remember reading that some current students at my school run Bootcamp just fine, and the tech dept. suggests using it as well. Any help would be GREATLY appreciated; I just don't want problems to occur once I start classes. Thanks so much.

Perhaps you should post this question in the Boot Camp forum rather than here. This is not the proper forum for dealing with Boot Camp or Windows installation problems.
I would consider reinstalling Windows. After verifying that it is working you can install Symantec AntiVirus and Defender, but I would not install anything else until you are sure the system is working properly. Note that you must turn off antivirus programs when you install new software. Failing to do so can result in defective installations.
Be sure you have carefully read the Boot Camp documentation before installing anything.

Windows 7 professional 64 Bit on MacBook Pro Retina 15 with Boot Camp ?

Hallo guys, i have a big problem with installing Windows 7 professional 64 Bit on my MacBook Pro Retina 15 with Boot Camp. No matter what i try i get a black screen after partitioning or get a message like " No bootable disk" or " No System Disk availabe".
My Mac has : OS X version 10.8.2, 16 GB RAM, 512 GB memory, 2.6 GHz Intel i7 and is only a week old
My Boot Camp is version 5.0.1
My Windows InstallingDVD is one year old now, i needed it to build a PC last year, hope that doesnt make a difference, its a full version, so not just for upgrading.
From what i saw in the apple support it should work on my macbook. I hope someone can help me.
Thanks in advance.

Ok, problem solved. I looked a bit more here in the questions and there was the answer and its quite simple.
Somehow an USB-stick makes problems while Windows wants to install, i dont know why. So i just made everything over DVDs and now everything works fine.

A Potential Convert Looking for Some Help with Boot Camp

I posted this in the Macbook Pro forums, and somebody directed me here. Hopefully you can help me with my questions.
Hello,
I have been a PC user ever since I can remember. I have loved the operating system and have had a Dell Laptop for 4 years now without any problems at all. I have no qualms with the Windows Operating Systems. But, it is time for me to get a new laptop, as I will soon be heading off to college. I was thinking about getting another PC, as they are significantly cheaper than the lower-end MBP that I would get, but I was also thinking about trying out a Mac. I plan on using this laptop for most of my undergraduate education though, so I don't want to buy something and find out it isn't what I want or I can't use it. So, if you would help me, I would like to ask some questions about the lower-end Macbook Pro, and I may just end up getting one.
First things first, I am going to be going into engineering, likely mechanical or systems, at either WPI, Northeastern, or Tufts. Ah the experience of choosing colleged. I know Tufts uses AutoCAD, WPI uses SolidWorks, but I am not sure which Northeastern uses. Either way, I most certainly will be using a CAD program. I know that most CAD programs do not work on Macs, so I will likely be using Boot Camp. I have though seen on these boards that the AutoCAD licensing does not work with Boot Camp, or that some users have faced major problems with it. If this is so, then it is highly likely that I will be unable to get a Mac as that program is going to be an absolute necessity. Even if this is just a small percentage of the population, I do not want to find mine being of major issue. For those of you who have gotten it to work, how difficult was the installation, and have you had any issues with AutoCAD or the like? With this in mind, would you even suggest that I get a MBP?
Another Boot Camp question. I have read many posts on these boards discussing different partitioning options, yet I still am unsure what they all mean. I expect to use the Windows side for more than just AutoCAD. I likely will install some games on it for when I am bored, and Microsoft Office, as I do not wish to spend the extra money buying Office for Mac and I need to have the versatility of Excel that I have heard is not found in the Mac version. What is the difference between these two partitioning types, which would you recommend, and how much storage should I partition if I get a 200GB hard drive?
Yet another Boot Camp question, sorry for so many of these. My friend who has a Mac lauds it for its security, nobody makes viruses for Macs. As I will most definitively be using Windows in Boot Camp, would this compromise this security? I know it will be Windows, but I still imagine that it would be encoded somewhat differently then normal, but I could be wrong. Also, if it is possible for the Windows portion to get a virus, could that affect the Mac portion?
Also, I don't use an iPod. I suppose I always thought they were overpriced for what they do. Instead I use an Iriver Clix 2, and I love it. The only thing is, I use Windows Media Player to sync it with my library. I know many have qualms with WMP, but I personally favor it more than iTunes, but that is just me. I do not believe that you can download it for a Mac. If I were to download it for the Windows portion, I am assuming that I would have to switch to Windows in order to listen to my music then, correct? I can also add music to it via Windows Explorer. Can I do so through the "Finder"?
Finally, is the battery life any different when using Windows than when using Leopard? I will likely be using the Windows portion in the class room.
Sorry for the long-winded post, but I am certainly hoping that I can get some solid answers to make an educated decision before getting my next laptop. I would like to thank you very much for any help that you are able to give me. I do hope you can help me quickly. Thank you.
Message was edited by: Pyrojoe

I can't answer all your questions, especially not anything having to do with CAD.
I still imagine that [Windows] would be encoded somewhat differently then normal,
No. Windows is Windows. You will need a good Windows antivirus, firewall and antispyware program. It is unlikely that a Windows virus will infect the Mac partition because, ordinarily, Windows doesn't know how to do anything with the HFS+ formatted Mac partition. However, the existence of products like MacDrive means that it is possible to teach Windows how to write to the Mac partition, so I see no reason why a virus could not be programmed to.
If I were to download it for the Windows portion, I am assuming that I would have to switch to Windows in order to listen to my music then, correct? I can also add music to it via Windows Explorer. Can I do so through the "Finder"?
Yes. Probably/yes.
Finally, is the battery life any different when using Windows than when using Leopard?
Yes. Windows does not have the battery management that Leopard has. The battery runs down much quicker in Windows.
You didn't ask, but depending on what kind of engineering you want to study, you may be interested in, or even need to, use some flavour of Unix/Linux. On the one hand, you could always create a partition on a PC--or wipe Windows--and install Linux on the PC. That could even be a good learning experience. On the other hand, Mac OS is Unix, but preinstalled. So with a Mac, you would already have a platform for writing shell scripts, you would have Perl and Python built-in, you would have an IDE (XCode Tools) for C/C++/Objective C/Java as well as gcc and make tools already on the disks which come with the computer, and so on.
Message was edited by: Mr.Lobotomy

Leopard 10.6.8 with Boot Camp 3.0.4 do not support Windows XP SP2???

Hello!
I have my MacBook Pro with Leopard 10.6.8 with Boot Camp 3 on it.Reading a BOOT CAM article I could see that it supports Windows XP SP2.I just installed Windows XP SP2...and when I am trying to use the drivers from MAC DVD it says that BOOT CAMP needs Windows 7.Why I can not use XP?Or where I can get the proper drivers?I have downloaded Boot Camp Drivers XP update pack 2.1 and tried touse it in that XP but just double clicking on it doesn't happen anything:(
Please Help.

Your saying BC 3.4 is on the Mac installer disk? I picked mine up in august 2011 and it only has 3.1 on it if I remember right. How did you check it?
As of today my BC Assistant says 3.4 but the Control panel in Windows only says 3.3, I figure it an't broke I'm not worried about it.
When you insert the disk, it asks you what to do, Run or Open, select Open.
Make a new folder on the desktop in XP, drag ALL the files over to it.
Right click on the setup.exe and select one of the options:
1)-Troubleshoot Compatibility, do what it suggests,
2)-Select Properties / Compatibility / click Run this program in Compatibility mode: then select XP sp2 and work your way up.
If anything pops up about permissions then right click on it again and select Run as Administrator.
If it still won't work then open the Boot Camp folder / Drivers folder / and install each one manually.

Trying to install vista 64 on a separate internal drive with boot camp

running into a wall here,
I'm able to install vista x64 when I divide an internal OS X drive that works fine, but I want to load Vista on it's own entire internal disk (bay 4). Bays 1,2, and 3 I use for OS X they are all 1TB drives. When I go through the boot camp assistant and divide a disk 50/50 between OSX and Windows and then boot to the vista install disk, the vista setup screen shows a PARTITION as "disk x partition x BOOT CAMP" and it works to select that partition, format and load windows... No problem. However when you choose the option in Boot Camp to erase an entire extra disk (in my case bay 4) and create a single partition for Windows and then boot to the Vista install disk the disk that was erased of the mac formatting, it doesn't show up with "BOOT CAMP" in the name inside the Vista setup screen, nor will it let you install vista to it, even if you pick the right one and format it inside Vista setup.
I've tried removing all internal disks except the one I want to load vista on and booting directly to the vista set up disc, and formatting with windows command line diskpart inside setup too, unsuccessfully. It simply keeps giving me messages that windows cannot be installed on the volume... I changed it from a GPU type disc using the "clean" command in diskpart but it still won't work! Man!!!
How can I get vista loaded on a separate disk on my mac, boot camp or not? It seems silly that a disk must have an OS X partiton on it before windows will load on it... Is there a way to load Vista x64 on it's own dedicated internal disk? Gratitude for any real help, I'm positive I'm not the first guy to want to load vista on it's own disk LOL!

So I figured this out myself, there was some kind of glitch in boot camp, i bypassed it and formatted the disk with the os x disk utility as a fat 32. pulled all the other drives out, and booted to vista setup. it formatted the disk to NTFS and lets me install vista 64 yahhhooooooooooooo!!!!!

Getting Started with Boot Camp

Similar Messages

Maybe you are looking for