Getting started with flashvars (basic)

I want to learn how to use flashvars, so went to a bunch of
websites, but I couldn't get it to work.
one of the pages I tried to use was this one:
http://blog.six4rty.ch/tutorials/flash-flashvars-in-as3/
I made a new flash file, and added the code to the first
frame(shown below), I published it as swf and html, then added, the
flashvars tags to the html file
quote:
<param name="FlashVars" value="myFlashVar=THIS IS MY
TEXT"></param>
flashVars="myFlashVar=THIS IS MY TEXT"
Nothing shows up in the embedded swf , when I open the html
file.
I tried as many different webpages as I could find for help,
but none of them are working for me.
a folder has all of these files in it:
1. FlashVarsAttempt.swf
2. FlashVarsAttempt.html
3. AC_RunActiveContent.js
4. FlashVarsAttempt.fla
the code in these files is show below.
please help

I'll admit I haven't read through every detail of your code,
but I can show you some code I use that has been working for me.
In my PHP page I have the following for the js command to
load the swf:
AC_FL_RunContent(
'codebase', '
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,0,0',
'width', '800',
'height', '600',
'src', 'SimpleChat',
'quality', 'high',
'pluginspage', '
http://www.macromedia.com/go/getflashplayer',
'align', 'middle',
'play', 'true',
'loop', 'true',
'scale', 'showall',
'wmode', 'window',
'devicefont', 'false',
'id', 'SimpleChat',
'bgcolor', '#ffffff',
'name', 'SimpleChat',
'menu', 'true',
'allowFullScreen', 'false',
'allowScriptAccess','sameDomain',
'movie', 'SimpleChat',
'salign', '',
'flashvars', 'intSessionID=<?php
printf("%u",$session_id); ?>&intUserID=<?php
printf("%u",$user_id); ?>'
); //end AC code
The code in my actionscript that accesses these values is:
intSessionID = root.loaderInfo.parameters.intSessionID;
intUserID = root.loaderInfo.parameters.intUserID;
Can you use something similar? I know it won't solve the
situation with noscript, but in the interest of getting something
working maybe it'll help. Good luck! :)
Dave

Similar Messages

Getting started with Lightroom - Basic assistance!

Ok, forgive me - just starting with Lightroom (and anxious to get going!). I have a new book but I have questions on some other basics.
First of all, I have a Canon camera - I shoot my pics in Raw + jpg. After shooting my first raw shots, I have them on my laptop (Win) - they stay here before during the work in process (sort, process, and pick what I want to post on my site). Then I move all of them to a backup drive - which is also backed up on another drive.
Your suggestions - what is my first step? Do I import these into Lightroom (currently on my laptop drive)? Do I want to want to import all my pics (from library/folders on external drive) or just my 'need to work with' on laptop drive? What is the most effective us of the catalogs - do you only have one main catalog, one per 'shoot', etc?
As I start to work with these - will I ultimately save these in .raw since they are in .cr2 format? Is it best to convert all of them?
Once they are imported and I work with them and ultimately move them over to my external drive, will the location have any effect on this - i.e. since they were imported?
Functionality wise, I am ready to start using this - it's the initial stuff regarding my workflow that I am curious about!
Do you find this as a complement or replacement to Adobe PSE? Maybe I am used to 'opening a file' or doing the catalog in Adobe PSE that is throwing me off as I convert to a new process! Although, I didn't really use it for organization, just minor PP.
Thank you much for your response...

I'm sure other people will be able to provide more in-depth answers to some of your questions, as I have little experience of Canon raw file formats or PSE. However, I'd like to offer you a couple of suggestions regarding your workflow.
1. The FIRST thing you should do after you download the files onto your laptop is to make the backups. Do this here and now, not later. If you don't, you only have one copy of your precious photos. If something goes wrong, you're going to kick yourself if you don't have a backup. Make sure you have your external backup at this stage too, if your laptop drive fails, then your backup is not much good to you if it's on the same drive.
2. Personally, before I import the photos into LR, I do a quick cull to get rid of what is obviously junk, ie. out of focus/unnecessary shots/etc. RAW files take up a lot of space and the more of them I import into LR, the slower it will be. That isn't to say I ONLY import the ones I am going to work with, rather, I DON'T import the ones I'm NOT actually going to keep and store. I do import photos that I eventually don't work with but I keep some anyway because at some point in the future I may come back to them for whatever reason.
As they say, your mileage may vary and it's worth trying different workflows until you find one that is quick and comfortable for you.
Kind regards,
MCV

How to get start with J2EE

Hi, I am really new to J2EE.Is there any pdf available to get start with J2EE basics.

kviaruningroups wrote:
Hi, I am really new to J2EE.Is there any pdf available to get start with J2EE basics.The most basic Java EE app you can start with uses servlets and JSPs (written using JSTL) to access relational databases using JDBC. You can go a very long way indeed just with those. Add the rest as needed.
%

Java Applet HelloWorld "Getting Started With Applets" example not working

Hi there,
It's been ages since I ran my Linux CentOS boot of Linux but I am going through the official oracle java applet tutorials, just every time I try and run the "Hello World" applet in Firefox 17.0.3 and I am running the Iced Tea thing for java applets.
Every time I try and run the example from the following code:
import javax.swing.JApplet;
import javax.swing.SwingUtilities;
import javax.swing.JLabel;
public class HelloWorld extends JApplet
// called when the user enters the html page:
public void init() // keep apps within the init() function very small as per the http://docs.oracle.com/javase/tutorial/deployment/applet/appletMethods.html
    try{
      SwingUtilities.invokeAndWait(new Runnable()
        public void run()
       JLabel myLabel = new JLabel("Hello World");
       add(myLabel);
        } // end running the application
      }); //end of swing invokeand wait
    } catch (Exception error){ // end user running the app in page
       // System.err.println("GUI didn't work on initial run");
}It keeps bringing up the error "Start: Applet not initialized" I did google that basic error and from what I found I should consult the JavaConsole, I know the console was removed from the Firefox menu quite a while ago. So went to find a way of loading it using the IcedTea one but it keeps bringing up a load of errors in even trying to run that.
Is there anyway of sorting this out? I mean I have even tried installing the one on the oracle website, the plain JDK but nothing seems to work.
Is there anyone that can help me get applets working? I was even going to go as far as to reinstall my distro but I want to avoid that as much as possible.
Thanks and I look forward to any replies,
Jeremy.

in the Getting Started with Java DB tutorial they
tell u how to set ur "DERBY_HOME" (what is that?).
once i press enter after typing this command:
set DERBY_HOME=D:\Java\Java
Phonebook\javadb in my command prompt do i get
any message or does it just go to the next line?type env or set or whatever in the command line to see what your environment variables are set to
they also tell u how to set ur "JAVA_HOME" (what is
that?). The Java installation you want to use
in their example they give u this: set
JAVA_HOME=C:\Program Files\Java\j2se1.4.2_05but in my java folder i have jdk1.6.0 and jre1.6.0
but no j2se1.4.2_05, so which 1 must i choose?It's up to you. I'd go with 1.6
also once ive done this: set
DERBY_HOME=D:\Java\Java Phonebook\javadb this
set JAVA_HOME=D:\Program
Files\Java\jre1.6.0 and this set
PATH=%DERBY_HOME%\bin;%PATH% and then type
sysinfo to verify that the variables were set
correctly i get these errors: 'D:\Java\Java' is
not recognized as an internal or external command,
operable program or batch file and '""'
is not recognized as an internal or external command,
operable program or batch file any help would
really be appreciated because this is really killing
me!you need to set your path variable - so something like:
set PATH=C:\Program Files\Java\j2se1.4.2_05\bin

FAQ: How do I get started with Photoshop Elements Editor, or What do all these tools do?

Opening an image editing application for the first time can be intimidating. The more powerful the tool, the more complicated it can be to learn to use. Below are a list of resources to help you get started with the Photoshop Elements Editor.
I just bought Photoshop Elements, where do I start?
There are a lot of directions you can go when you first make your purchase. Here is your first roadmap.
Getting Started Tutorials
What do all these terms mean?
There are some common words tossed around when talking about image editing or tool use. Here is a helpful guide to define these: Photoshop Elements key concepts
Photoshop Element Help Topics:
Workspace basics
Tools
Color and tonal correction basics
Elements Basics, an overview of Elements' essential concepts on Photoshop Elements User.com
Where can I find some tutorials on the web?
There are many resources for learning Photoshop Elements on the internet. Here are some that we recommend.
Photoshop Elements: Where can I find some good basic tutorials? on the Photoshop Feedback site.
Like Photoshop Elements on Facebook for daily tutorials and inspiration. As well as the occasional contest.
Editing Tutorials for Photoshop Elements on Photoshop.com
Getting Started with the Elements Editor on Photoshop Elements User.com
Photoshop Elements for Dummies.com
What about video tutorials?
Some find it easier to watch a product being demonstrated and explained by an expert
Learn Photoshop Elements 11 on Adobe TV
Photoshop Elements channel on YouTube
Where can I find books about learning Photoshop Elements?
Photoshop Elements books on Pearson Peachpit Press

Hi Christoph and WarriorAnt,
Thank you both for the replies.
I don't know anything about GarageBand because I've never used it. I've never used any music software before, (other than iTunes, Ha!)
I don't have GarageBand on my Mac because it wasn't stock on the old Powerbook G4, so I would have to buy it. I'm happy to do that if I can figure out that it does what I want ... but I'm overwhelmed by the info at Apple's site. Too much for a beginner like me. Even the wikipedia.com entry for GB uses too many terms I don't know, so I'm easily lost.
I just want to be able to set up drum loops and play along with them. The main thing is that I'm able to use third party loops. There are so many really amazing loop products out there ... jungle drums, acoustic jazz drums, lounge, etc. I don't want to get caught up in anything proprietary (like Band-In-A-Box) because the selection is limited. I'm sure GarageBands loops are great, but I want access to all these other third party loops as well ... loops that were not specifically made for GarageBand.
Will GarageBand let me drop in any and all drum loops from these other companies?
And does GarageBand work like a basic sequencer, where I can program up an intro, X number of measures of a loop, then a turnaround, then a variation loop, then an ending, etc?
I know the high-end stuff like Native Instruments Kontakt does this, but unfortunately it also does a kazillion other professional-level things I will never need and don't want to pay for (and which make the software more complex and daunting).
Thank you again, both of you, for responding and helping me with this project.
Just a little more advice on those two questions would really go a long way.
-JOHN

Error, in Getting started with Labview. Chapter 3, part 4.

Hi.
Still struggling on, trying to find the time to work through the "Getting Started with LabVIEW" document.
Only 19 days left to go, and I'm still only in chapter 3!...
Right. In the "Saving Data When Prompted by a User" exersise, part 4...
4.   Right-click the Signals input of the Write To Measurement File
      Express VI and select Insert Input/Output from the shortcut menu to
      insert the Comment input.
Problem is, that option is greyed out, so not available!...
I did what the instructions said, I right clicked on the "Signals" input, and it doesnt do what it says on the tin!
Any pointers?   Please don't mention search the help, I've crashed the entire LV environment 3 times now, trying to search for something in there. It's OK if it finds someting, but it seems to bomb at times, when there is some ambiguity when searching.
Also, I won't be able to do anyting with any replies for a day or two, as I have to go up country to a customer, and mess about with hot oil, high volts, and lots of RF. It never ends.   (I've still got the day job to do, while trying to fight my way through this "evaluation". 30 days of "Use" would be better, than 30 calendar days for some of us.)
Regards.
Dave Baxter.
Technical Manager: AR-UK Ltd.
AR United Kingdom
OK... Who let the smoke out?

Hi Dennis, and everyone else..
That is not how it looks when first dropped on the BD. On my machine, it is partialy expanded by default, after you clear the Configure dialog that pops up ocupying most of the screen.
Again, if it makes a difference to the way the Right Click shortcut menu works, it should be documented in the Getting Started document, especialy as it seems to be a critical point.
OK, explain this...
I've just rubbed out the save to file VI, cleaned up the broken wires etc, and then planted a new one on the BD. Once I cleared the Configure dialog that covers up most of the screen before you see it the first time, the VI was partialy expanded. I forget the exact list, but "Signals" was not at the top.
I did *EXACTLY* the same again, deleted it, cleaned up, and then planted a fresh new one. That DID appear that time with nothing but the "Signals" item showing, and two down caretts below that, indicating more items.
So......
Why the different behaviour each time, on the same BD, in the same session. Some underlying working data not being correctly initialised when invoked? Of course, that never happens, right? ('C' programmes eh?)
Trying some more, it seems the behaviour loosley depends on just how close to the edge of the While loop grey border you place it.   Odd.   I have a 1280x800 screen to play with, and a 1280x1024 second screen I use for the Getting Started document. That is the absolute maximum I can have, due to hardware limits.
I also find, that if you fully expand the "Write to Measurement File" VI block, then fully collapse it, then expand it again, all the items in that list have changed places! Why?
I had noticed earlier that there is no uniformity in the layout of even the items common to many if not all VI blocks (error in, and error out to name but two) Sometimes one is above the other, sometimes the other way round, sometimes they are not even ajacent to each other. Has that been done as a source of minor ammusement or something?
Talking to another colegue here, who just wandered in to see how I was getting on with this. Seems he also has tried the introductory entry into LV (V8.something) in the past. But he too, found too many things that behaved differently from one time to another, so abandoned it as a lost cause, then decided to learn how to use Visual Basic with NI-GPIB IO instead.   Not without issues either he said, but at least it all behaves exactly the same, each and every time.
End of the day now...
Regards.
Dave B.
OK... Who let the smoke out?

Problems getting started with LabVIEW FPGA

Two (probably) related questions:
1. I am trying to get started with LabVIEW FPGA, and I am having trouble using a host VI to test my FPGA VI. I started with a basic QAM modulator VI, to be run on the FPGA, and I have reached the point where I need to verify the logic and timing with this VI running on the development computer with simulated IO. I have tried various combinations of putting the code inside single-cycle timed loops vs not; putting the modulator block directly into the host VI, and using the "FPGA reference" block. When neither the host VI nor the modulator VI use a single-cycle timed loop, I see correct behavior. In every other case, the output of the VI is either absent or incorrect. I need to use a single-cycle timed loop in the FPGA VI to properly verify timing behavior (as far as I know), so the one functioning case is not enough for me.
I'm sure there is a key step I'm missing or misunderstanding, but I have not been able to figure it out myself yet. I've attached my modulator diagram as well as two different attempts at host VIs. I can share other information, but I'm not sure what is most relevant.
2. I am also trying to test a simple wrapper VI for the Xilinx FFT block, and I am having trouble accessing FIFOs inside the host VI. I thought this would be relatively straightforward, but when I tried to change the "method" on an "invoke method" block, there were no options for accessing FIFOs, as I understood there should be. This is a total roadblock for me. These two diagrams are also attached, the test diagram shows the options available to me for the "invoke method" block.
Labview 2013, PXIe-7965R, PXIe-8133 controller.
I had to combine the diagram images; in case they are hard to follow this way, see the individual images here: http://imgur.com/a/oB6OD .
Thanks in advance for any suggestions.
Attachments:
mod_all.png ‏68 KB
fft_all.png ‏52 KB

Hello Monguin61
If you are having problems reading from DMA FIFO's you should test them using a very simple code to understand their behavior. First, you could start taking a look to the linked documents:
Reading DMA FIFOs from Host VIs (FPGA Interface)
Using DMA FIFO to Develop High-Speed Data Acquisition Applications for Reconfigurable I/O Devices
FIFO.Read (Invoke Method)
Then you could test and analyze a simple example to understand how it works, for example this one: Simple DMA FIFO Example for FPGA.
Check the references when you are using DMA FIFO's, I noticed you did not connect them in the second picture attached.
Regards
Frank R.

Help Needed with getting Started With Office 365 Development C# Rest API

We have a O365 Tenant Setup with a Federated Active Directory Setip we want to be able to right code that will connect to our tenant and perform basic CRUD operations against it (ex. Creating mail boxes)
The problem is we want this to be contained in a CLR trigger In SQL so say if a new user is added to our user table then we would create a new AD account for that user and also create a mailbox.
But I cannot find and example on how to connect to Office 365 using the REST API (Not the SDK because you can not add the connected service to a class library) and before the required actions that we need to do. All the example I have found are with the
SDK API and/or require window 8 and that is also not an option.
Please help I do not know where to start, and I would love to see some examples done in c# and not using the SDK.
Thanks,
Andrew Day

Hi,
>> Instead of SharePoint URLs I would use the O365 API URL?
Yes, in my sample code, I was accessing the File resource by using the O365 File API. In your case, you need to acquire the token to access the Mail resource and use O365 Mail API.
By the way, I think the article
Understand Office 365 app authentication concepts will help you to understand the authentication process in Office 365 Development.
>> Why can I not use the SDK API with a class Library?
Actually, you are able to reference the Office 365 .NET SDK in the class Library. But the class library project type was not supported by Visual Studio Office 365 Development Tool. As a workaround,
you can reference the SDK manually in your project.
Since your original question is about “getting started with Office 365 Development C# Rest API”, if you have more questions about the Office 365 SDK, I will suggest you posting a new thread
to discuss the Office 365 SDK. It will involve more other community members to share their ideas and experience on a specific a question and for others who had a similar question could also find the valuable information quickly.
Regards,
Jeffrey
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Hit brick wall with "Getting started with DW"

Hi Guys, i am totally new to web design and DW, working
through the "Getting started with DW" under the “help”
banner seemed o.k at first until one leaves the comfort of table
design, once into the css and xml the environment the Getting
started tutorial is very shake and waiting for a reply from DW
would test even the patience of a Buddhist monks.
Can someone please recommend a good book/video/dvd or is it
best just to ask questions on this forum, it does seem faster than
DW.
Thanks in advance
Regards
Bal

To be honest with you, the very best way to get started is to
start with
HTML and then CSS. A week or two spent learning the basics of
both of these
will make DW seem like a walk in the park afterwards.
Ask your questions here, though....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"herbybal" <[email protected]> wrote in
message
news:ejs6rk$1b1$[email protected]..
> Hi Guys, i am totally new to web design and DW, working
through the
> "Getting
> started with DW" under the ?help? banner seemed o.k at
first until one
> leaves
> the comfort of table design, once into the css and xml
the environment the
> Getting started tutorial is very shake and waiting for a
reply from DW
> would
> test even the patience of a Buddhist monks.
> Can someone please recommend a good book/video/dvd or is
it best just to
> ask
> questions on this forum, it does seem faster than DW.
>
> Thanks in advance
> Regards
> Bal
>
>

Getting started with Easy Enhancement Work Bench EEWB

Can anyone give me some pointers with regards to how do I get started with using EEWB for SAP CRM 2007. I would appreciate any pointers which help me with very basic elements of EEWB like
a. Enhancements which are possible using this
b. How does one go about using this
c. Any examples where some enhcements have been done using EEBW etc.
In short quite elementary but with precise infomation
Thanks...

For example you can add custom field to business partner:
1. tcode EEWB
2. enter your username to Name field
3. right-click on Project by <your_username> and choose Create Project
4. enter all required fields
5. right-click on appeared project and choose Create Extention
6. enter fields and the Wisard will start
You can find more information on http://help.sap.com/saphelp_crm60/helpdata/en/26/5bb9d5a62fdb479f74768a3e7f759c/frameset.htm
Best regards,
Artur Litvinov.

Getting started with 3850 as WLC - Wireless GUI fails

I have started to look into configuring our 3850 as a WLC
I enabled the command wireless mobility controller
Then I tried to connect to <switch ip>/wireless
I just get a dead page.
I configured the wireless management vlan but still no joy
What basic steps am I missing?
Thanks
Roger

1. Make sure this are aenabled on this:
ip http secure-server
ip http server
2. Also Enable WIreless Management
3850(config)#wireless management interface vlan <1-4095>
3. Normally You can access wireless controller GUI using https:///wireless URL.
Please check these docs, it may helps.
https://supportforums.cisco.com/docs/DOC-34430
http://mrncciew.com/2013/09/29/getting-started-with-3850/
Please go through these, u will resolve ur problem.
Regards
Dont forget to rate helpful posts

Powershell: what course to get started with?

Hi,
I have some basic knowledge on Powershell and would love to extend that in order to use with SCCM 2012, AD etc.
I would like to do this with video training, found these ones:
Windows PowerShell v2-v3-v4 Ultimate Training - CBT Nuggets
ScriptingAnswers PowerShell 101 Class
Lynda - Up and Running with PowerShell 5
InfiniteSkills - Learning Windows PowerShell
CBT Nuggets PowerShell 3 Toolmaking Scripting
CBT Nuggets PowerShell 3 Foundation
Windows PowerShell Fundamentals LiveLessons
Any particular you could (un)advise?
J.
Jan Hoedt

Free video training for PowerShell:
http://www.microsoftvirtualacademy.com/training-courses/getting-started-with-powershell-3-0-jump-start
¯\_(ツ)_/¯

Getting started with ePrint (Videos)

Here are a few videos on getting started with ePrint. These videos are specific to specific model(s).
Getting Started with ePrint - HP LaserJet P1606dn
Getting Started with ePrint - HP Laserjet CP1525
The printer shown in this video is the HP Laserjet CP1525.
Getting Started with ePrint - HP Laserjet 1536dnf MFP
The printer shown in this video is the HP Laserjet 1536dnf.
Getting Started with ePrint - HP Laserjet P1102w
The printer shown in this video is the HP Laserjet P1102w.
Getting Started with ePrint - HP Photosmart Plus e-All-in-One Printer - B210a
The printer shown is the HP Photosmart Plus e-All-in-One - B210a, but these steps will also work for the B210b and B210c.
Getting Started with ePrint - HP Officejet 6500a-7500a-8500a (a910a)
These steps work for the HP Officejet 6500A e-All-in-One -- E710s, E710e, E710n, E710a; HP Officejet 7500A Wide Format e-All-in-One Printer - E910c, E910a; HP Officejet Pro 8500A e-All-in-One Printer - A910a, A910d.
Getting Started with ePrint - HP Photosmart Premium e-All-in-One Printer - C310a
The printer shown is the HP Photosmart Premium e-All-in-One Printer - C310a, but the steps will also work for the HP Photosmart Premium e-All-in-One Printer - C310b, and the HP Photosmart Premium e-All-in-One Printer-C310c.
Getting Started with ePrint - HP Color Laserjet CP1025nw
The printer shown is the HP Color LaseJet CP1025nw.
Getting Started with ePrint - HP Photosmart eStation All-in-One Printer - C510a
These steps will work for the HP Photosmart eStation All-in-One Printer - C510a.
Getting Started with ePrint - HP Officejet Pro All-in-One 8500a A910n
These steps will work for the HP Officejet Pro 8500a (a910g, a910n) All-in-One printers.
Getting Started with HP ePrint - HP Photosmart e-All-in-One Printer (D110a)
The printer shown is the HP Photosmart D110a, but the steps will also work for the HP Photosmart B110a and K110a.
9/20/2012 update: 4 new videos
Getting Started with ePrint - HP Envy 100 e-All-in-One Printer (D410a)
The model shown is HP Envy 100 e-All-in-One Printer (D410a).
The steps shown apply to these printers:
HP Envy 100 e-All-in-One Printer (D410a)
HP Envy 100 e-All-in-One Printer (D410b)
HP Envy 100 e-All-in-One Printer (D411a)
Getting Started with ePrint - HP Deskjet 3050A e-All-in-One Printer (J611a)
This video shows the HP Deskjet 3050A e-All-in-One Printer (J611a), and also applies to the J611b.
Getting Started with ePrint - HP Photosmart 5510 e-All-in-One Printer (B111a)
This video shows the HP Photosmart 5510 e-All-in-One Printer (B111a), but these steps also apply to the B111b, B111g, 5511 B111j, 5512 B111a, 5512 B111e, 5512 B111f, 5514 B111c, 5514 B111d, 5514 B111h, 5515 B111a, 5515 B111h, 5515 B111j, 6510 B211a, 6510 B211b, 6510 B211e, 6512 B211a, 6515 B211a.
Getting Started with ePrint - HP Envy 110 e-All-in-One Printer (D411a)
The printer shown in this video is the HP Envy 110 e-All-in-One Printer (D411a), but the steps also apply to the Envy 110 (D411b), Envy 111 (D411d), and the Envy 114 (D411c).
I am an HP employee.

Great topic!!
I am an HP employee

Can not get example to work after following instructions given in "Getting Started with the NI LabVIEW C Generator" guide

We explored using sbRIO for our project, for different reasons we ended up going with a different embedded solution . We are currently evaluating the LabVIEW C Generator to convert some of the core analysis routines from LabVIEW to C so the team that will be creating the embedded solution don't have to re-implement them from scratch.
Before converting our code, I followed the instructions given in the "Getting Started with the NI LabVIEW C Generator" manual to create a static library created inCygwin using GNU Compiler Collection (GCC).
I managed to compile the code, but when I type "run GCD.exe" in the Cygwin console, I just see the window flash with no time to see if the result is correct or not. I modified the main.c cde to add a getchar(), but the window still just flashes and now I am left with the GCD process still running and have to kill it using Windows Task Manager.
Has anyone else got this example to run? I am sure I am missing an obvious setting or step, please help me.
More details below.
Thanks,
Fab
Here is a video showing the steps I followed
If you don't want/can't see the video. Here are some screenshots of what I have done so far:
GratestCommonDivisor.lvproj C Generation build specs Information:
C Function prototype definition:
I copied Makefile located at: C:\Program Files (x86)\National Instruments\LabVIEW 2011\examples\CGenerator\Tutorial\Cygwin
and replaced both Makefile and Makefile.cygwin in the directory where the C code was generated
I also copied main.c from the same location and replaced the one generated
Here is the snapshot of the results after executing "make GCD.exe"
Then to run it I just type
I see a window open and close really quickly and I never see the result. I have tried adding the getchar() line to the main.c file, but still I don't get to see the results.
Certified LabVIEW Architect * Certified Professional Instructor * LabVIEW Champion

Hi Kevin,
I hope you had a good Thanksgiving. I am attaching a zip file with the LabVIEW project, my build specification and my version of "Greatest Common Divisor.vi", which should be the same as the one that you have that ships with the LabVIEW C Generator, but just in case. I am also attaching a zip file with the C files generated by the LabVIEW C Generator.
You can also see the video I posted earlier with the steps I followed. I hope you are able to point out where I went wrong.
Thanks,
Fab
Certified LabVIEW Architect * Certified Professional Instructor * LabVIEW Champion
Attachments:
GreatestCommonDivisor.zip ‏8 KB
CGen Files.zip ‏71 KB

Getting started with an iBook G3?

Hey,
I just got an iBook G3 (500mhz, snow, airport, 10gb hd, upgraded ram), to compliment my iMac (G5 rev c) and I'm a little new.
It was used, I got it via trade.
Does anyone have some tips for me to get started with it ? I'm wanting to upgrade the HD to at least 20 GB, and to max out the ram. Any hints on that ?
Also, where can I get a new battery and charger ?
Also, what else should I know about it ?
It will mainly be used for writing (novel, fan-fics), surfing the web (wirelessly), and when I'm traveling...
Oh, it has OSX10.2 installed.

Hi, Josh. Welcome to Apple Discussions.
How much RAM is installed?
Does it have the original AirPort card installed? (You may want to install one, if not, to enable wireless access to the internet.)
Did the original system CD's and the OS X 10.2 software CD's come with it? If not, try to get the person you got it from to give them to you. You will need them if you intend to upgrade the hard drive (and for maintenance, even if you don't upgrade the hard drive).
Hard drive upgrade services:
MCE Technologies
DT & T Computer Services
A hard drive upgrade is very complicated, and best left to a professional.
Check out the procedure:
http://www.pbfixit.com/Guide/50.12.0.html
http://www.powerbooktech.com/knowledge,name-Hard-Drive,type-6.htm
http://uk.geocities.com/ibookupgrade/
http://sterpin.net/uk/ddibookdualuk.htm
Hard Drives:
Other World Computing
Newegg
Batteries:
http://www.powergears.com/product.php?catID=1100&p=1
http://www.computergiants.com/items/one_item.asp?part=71148&cat=99&subsubcat=115 2
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore?productLearnMore=M93 37G/A
http://eshop.macsales.com/item/Newer%20Technology/BAPIB111V36/
http://eshop.macsales.com/item/Newer%20Technology/BAPIB111V48/
Adapters:
I have found the following options for replacing a white iBook power adapter:
http://www.macresq.com/store/detail.php?prodID=P009141
MCE Technologies
http://www.madsonline.com/index.html?
adapter at Other World Computing
Apple's is the only one with the glowing ring, though, and is found here:
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore?productLearnMore=M89 43LL/A
Enough dual USB G3 iBooks suffered from a logic board problem that Apple began the iBook Logic Board Repair Extension Program in January of 2004. Check out the FAQ page and be aware of how this logic board problem manifests itself.
It has been suggested that you can minimize the chance of a logic board failure of this sort by never picking it up by the front left corner alone. Pick it up with both hands or in the center under the trackpad.
It's also a good idea not to close it any more often than you need to in order to minimize the chance of the backlight cable (and other cables and wires) becoming pinched in the hinge or broken. When you have some time, check out the Discussion thread in the Displays Forum entitled 90 degrees and black out!!!!
Information on using the battery to maximize both life and lifespan can be found here.
You can download the manual for the iBook (Dual USB) from this page:
http://www.apple.com/support/manuals/ibook/
Good luck, and happy iBooking!

Getting started with flashvars (basic)

Similar Messages

Maybe you are looking for