Getting started with SDK 2.0 &open Ni

Dear all,
I am new to kinect environment & coding.
i am using kinect v2 sensor. i have already tested kinect working using kinect evaluation software. Now my next step to keep writing code.
Earlier version of kinect which support SDK1.8 open Niopen ni2 from below link window8.
There are lot example where they use sdk1.8 & openni2 for coding. I have the SDK2.0 installed in machine. how to use it??
to begin with my coding which IDE is useful
i have recently installed visual studio2013 for desktop
1) which IDE suit my hardware ??
2) please suggest me relevant link to download programs kinects sensor.
3)more example code kinect v2 sensor
4)where i can get information on how to use SDK2.0 for developing programs.
AMPS12
if you see installed SDK in program file it only show SDK1.8 not SDK2.0.
SDK 2.0 being installed properly i cross check twice

Hi,
may I suggest the
Programming Kinect for Windows v2 series on MVA this is a 7 hours course covering almost all you need to get started.
I would also mention the two session Custom Gestures End to End with Kinect and Visual Gesture Builder part 1 and
part 2
hth
-g
Gian Paolo Santopaolo - softwarelab.it -
thedarksideof.net
Disclaimer: This post is provided "AS IS" with no warranties, and confer no rights.

Similar Messages

How do I stop the "Getting Started with Mozilla Firefox" tab from opening every time I open FF?

Every time I open FF, the "Getting Started with Mozilla Firefox" tab opens. I have checked and it's not in my homepage list.
If I open any additional windows, it doesn't open.
But, once I close all of them and reopen it again, the tab opens.
I've had a similar problem with a couple addons (ietab) doing the same thing.

about:config is typed into the address bar as if you were going to a web page.
It will popup a message warning you that you are messing with important stuff.
Just agree.

Getting started with the BC Open Platform

Hey BC partners,
Welcome to the BC developer forum!
To get started, just visit http://developers.businesscatalyst.com/ (username: alpha, password: bcdevdocs) and follow the Getting Started tutorials. This is a dedicated developer documentation site which includes information on how to register and create an app, links to API endpoints, modules and tag references and sample apps.
Here's what you should do:
Go to http://developers.businesscatalyst.com/getting-started/ and have a look at the introduction pages
Sign up as a developer and register your app, by clicking the "Create an App" button on the top right part of the screen: http://developers.businesscatalyst.com/getting-started/register.htmlNOTE: For now, all requests are manually reviewed and approved, it might take a couple of days for your app key to be sent
You'll receive the app key over email, or further clarifications, if needed.
While your key is generated, follow these steps to create a "Hello World" sample app on your site: http://developers.businesscatalyst.com/getting-started/building-your-first-app.html#hello_ world
Once you receive the app key, you can start building your app: http://developers.businesscatalyst.com/getting-started/building-your-first-app.html
Here's another sample app and instructions on how to use it and understand how it works: http://developers.businesscatalyst.com/samples/meet-the-team-app.html
Other useful developer resources:
Customizing the Admin Console menu using an app: http://developers.businesscatalyst.com/developer-documentation/customize-admin-menu.html
Get started with the Business Catalyst APIs: http://developers.businesscatalyst.com/developer-documentation/api-reference.html
API endpoints reference: http://docs.businesscatalyst.com/content/api-endpoints/index.html (username: alpha, password: bcdevdocs)check out the new Authentication, FileSystem and the webapps/webapp items APIs
The bcapi.js SDK - http://adobebc.github.io/bcapi.js/index.htmland how to use it: http://developers.businesscatalyst.com/developer-documentation/sdk-reference.html
Best practices when developing apps: http://developers.businesscatalyst.com/developer-documentation/best-practices.html
Within the next few months our team will continue to develop these features with the help of the Beta Group, and then open the development program to all partners of Business Catalyst.
We hope that you are just as excited as we are to embark in this new direction for Business Catalyst, and shape the future of the platform.
If you run into any problems or have any questions, start a new discussion on this forum
Enjoy,
The Business Catalyst team
P.S: Make sure to sign up to receive email notifications from this forum - by going to http://forums.adobe.com/community/business_catalyst/developer_forum and clicking "Follow this forum" in the Notifications pod on the right side of your screen.

Hi,
Although I'm learning I am a complete programming / javascript / json / jquery novice so my apologies in advance if this is a stupid question or i have failed to understand the new restful api functionality which is available under this beta.
In the past, where a client has had really specific functionality that was not achievable within the BC framework, I have implented an external php application (with the help of a web developer) and simply linked to it via a sub domain. Obviously not ideal.
My hope is that the new api functionality will open up a range of possibilities that will go some way toward eliminating the need to build extenal applications and simply extend the existing BC framework using the added api functionality.
One example that i would like to move solely on to BC is the following - http://mylist.grocerwatch.com.au/
The above is a grocery pricing comparison website whereby the applicaton highlights the cheapest and best value (comparible) products. The application also allows the user to select from the items displayed to create a shopping list showing where to buy the selected products for the best value. The user can also email, print, or save their shopping list.
My question is for someone who is more farmiliar with the new api and who is perhaps more experienced than me with programming. Would it be possible to create the above solely on BC without sacrificing speed, security, functionality etc?
Thanks.

How do I stop the Getting started with Mozilla Firefox page from opening everytime I start Firefox. If I have to see that everytime then I will delete Firefox for good...!!!!

Everytime I start firefox since the last update I can't get the stupid Getting started with firefox page to stop opening up. I downloaded the version 8 and it still opens ..

Well the latest and Greatest Firefox Version 8.0. Won't let me change my home page no matter what I do it always comes back with the getting started page and my orignal home page.
What a piece of garbage it is turning into..!!!!

I upgrade firefox from 7 to 8 and now when i start firefox everytime it opens "getting start with firefox" page, in options i select the option 'show a blank page" how can i resolve this issue?

i upgrade firefox from version 7 to version 8, now when i start firefox everytime it open self the "getting start with firefox" website, in the options on firefox i select the 'show a blank page' but its not working. i am using firefox on windows XP- SP2.

Try restarting Firefox, the one time page(s) after starting a new release should disappear. Actually this last time with 8.0 they did not come up for me.
If that doesn't work then bring up '''about:config''' and place the url of the page into the filter. Right-click on anything that comes up and use "Reset".

Just updated to latest version , getting started with Mozilla Firefox opens everytime not homepage , how do I get rid of unwanted page

I upgraded to the latest version of Firefox , when I hit the icon and firefox opens the first page that comes up is the Getting started with Mozilla Firefox and not my home page , I have checked everything I could find and nothing keeps this page from opening like it's my home page . also I unloaded download helper for the same reason , it keep opening up wanting me to upgarde to the latest version , I already had upgraded , I don't know what is going on , My home system was upgraded early last week and works fine , I double checked all setting between the two systems , nothing , Please let me know where to look , thank you , a longtime fan of Firefox.

Hi Romulus949,
You should take a look at the Knowledge Base article [[How to set the home page]].
There are steps in that article to reset your homepage preferences to default. I would try that first to clear out any strangeness. Then you can set your homepage to anything you like.
If that doesn't work you should look at [https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox this article about that specific issue] and the article [http://kb.mozillazine.org/Preferences_not_saved Preferences not saved].
Hopefully this helps!

Can not get example to work after following instructions given in "Getting Started with the NI LabVIEW C Generator" guide

We explored using sbRIO for our project, for different reasons we ended up going with a different embedded solution . We are currently evaluating the LabVIEW C Generator to convert some of the core analysis routines from LabVIEW to C so the team that will be creating the embedded solution don't have to re-implement them from scratch.
Before converting our code, I followed the instructions given in the "Getting Started with the NI LabVIEW C Generator" manual to create a static library created inCygwin using GNU Compiler Collection (GCC).
I managed to compile the code, but when I type "run GCD.exe" in the Cygwin console, I just see the window flash with no time to see if the result is correct or not. I modified the main.c cde to add a getchar(), but the window still just flashes and now I am left with the GCD process still running and have to kill it using Windows Task Manager.
Has anyone else got this example to run? I am sure I am missing an obvious setting or step, please help me.
More details below.
Thanks,
Fab
Here is a video showing the steps I followed
If you don't want/can't see the video. Here are some screenshots of what I have done so far:
GratestCommonDivisor.lvproj C Generation build specs Information:
C Function prototype definition:
I copied Makefile located at: C:\Program Files (x86)\National Instruments\LabVIEW 2011\examples\CGenerator\Tutorial\Cygwin
and replaced both Makefile and Makefile.cygwin in the directory where the C code was generated
I also copied main.c from the same location and replaced the one generated
Here is the snapshot of the results after executing "make GCD.exe"
Then to run it I just type
I see a window open and close really quickly and I never see the result. I have tried adding the getchar() line to the main.c file, but still I don't get to see the results.
Certified LabVIEW Architect * Certified Professional Instructor * LabVIEW Champion

Hi Kevin,
I hope you had a good Thanksgiving. I am attaching a zip file with the LabVIEW project, my build specification and my version of "Greatest Common Divisor.vi", which should be the same as the one that you have that ships with the LabVIEW C Generator, but just in case. I am also attaching a zip file with the C files generated by the LabVIEW C Generator.
You can also see the video I posted earlier with the steps I followed. I hope you are able to point out where I went wrong.
Thanks,
Fab
Certified LabVIEW Architect * Certified Professional Instructor * LabVIEW Champion
Attachments:
GreatestCommonDivisor.zip ‏8 KB
CGen Files.zip ‏71 KB

FAQ: How do I get started with Photoshop Elements Editor, or What do all these tools do?

Opening an image editing application for the first time can be intimidating. The more powerful the tool, the more complicated it can be to learn to use. Below are a list of resources to help you get started with the Photoshop Elements Editor.
I just bought Photoshop Elements, where do I start?
There are a lot of directions you can go when you first make your purchase. Here is your first roadmap.
Getting Started Tutorials
What do all these terms mean?
There are some common words tossed around when talking about image editing or tool use. Here is a helpful guide to define these: Photoshop Elements key concepts
Photoshop Element Help Topics:
Workspace basics
Tools
Color and tonal correction basics
Elements Basics, an overview of Elements' essential concepts on Photoshop Elements User.com
Where can I find some tutorials on the web?
There are many resources for learning Photoshop Elements on the internet. Here are some that we recommend.
Photoshop Elements: Where can I find some good basic tutorials? on the Photoshop Feedback site.
Like Photoshop Elements on Facebook for daily tutorials and inspiration. As well as the occasional contest.
Editing Tutorials for Photoshop Elements on Photoshop.com
Getting Started with the Elements Editor on Photoshop Elements User.com
Photoshop Elements for Dummies.com
What about video tutorials?
Some find it easier to watch a product being demonstrated and explained by an expert
Learn Photoshop Elements 11 on Adobe TV
Photoshop Elements channel on YouTube
Where can I find books about learning Photoshop Elements?
Photoshop Elements books on Pearson Peachpit Press

Hi Christoph and WarriorAnt,
Thank you both for the replies.
I don't know anything about GarageBand because I've never used it. I've never used any music software before, (other than iTunes, Ha!)
I don't have GarageBand on my Mac because it wasn't stock on the old Powerbook G4, so I would have to buy it. I'm happy to do that if I can figure out that it does what I want ... but I'm overwhelmed by the info at Apple's site. Too much for a beginner like me. Even the wikipedia.com entry for GB uses too many terms I don't know, so I'm easily lost.
I just want to be able to set up drum loops and play along with them. The main thing is that I'm able to use third party loops. There are so many really amazing loop products out there ... jungle drums, acoustic jazz drums, lounge, etc. I don't want to get caught up in anything proprietary (like Band-In-A-Box) because the selection is limited. I'm sure GarageBands loops are great, but I want access to all these other third party loops as well ... loops that were not specifically made for GarageBand.
Will GarageBand let me drop in any and all drum loops from these other companies?
And does GarageBand work like a basic sequencer, where I can program up an intro, X number of measures of a loop, then a turnaround, then a variation loop, then an ending, etc?
I know the high-end stuff like Native Instruments Kontakt does this, but unfortunately it also does a kazillion other professional-level things I will never need and don't want to pay for (and which make the software more complex and daunting).
Thank you again, both of you, for responding and helping me with this project.
Just a little more advice on those two questions would really go a long way.
-JOHN

How to remove "Get started with your site"

Hello,
I am in the process of automating the creation of a site collection using PowerShell. Everything works fine but I would like to remove or hide the "Get started with your site" that we see the first time we open a site. Deactivating the Getting
started feature will not remove it.

For other readers, here's the full script needed:
# First, get a reference to the target web app:
$web = Get-SPWeb "[TargetSiteURL]"
# Assuming that 1) the web page file that you want to examine is
# the default landing page and 2) Publishing has been activated
# for the containing site collection, the following gets you a
# reference to the web part manager:
$wpm = $web.GetLimitedWebPartManage("pages/default.aspx", [System.Web.UI.WebControls.WebParts.PersonalizationScope]::Shared).WebParts
# Note the "pages" in the path. Next, the following lists out
# all web parts on this page:
$web.GetLimitedWebPartManager("pages/default.aspx",[System.Web.UI.WebControls.WebParts.PersonalizationScope]::Shared).WebParts
# Review this list, and then identify the PartOrder of the web
# part you want to remove. It its, say, its "5", you get a
# reference to web part like so:
$wp = $wpm.WebParts[5]
# Now delete the web part:
$wp.DeleteWebPart
# and close the web app reference:
$web.Close()
It's easier to remove the web part directly from the page, while it's in edit mode, but then the scripted method also works when automation is needed.

Problems getting started with templates

I am just getting started with the dreamweaver 30 day trial.
I am trying to create my first file. When I try to open a new
template file I get the message below-
"Dreamweaver stores templates in the root folder of a site,
but there are no sites defined. Please add a site"
What does this mean? How do I find the templates? I am a
total dreamweaver newbie trying to learn the program.
Thanks

ntmunger wrote:
> I am just getting started with the dreamweaver 30 day
trial. I am
> trying to create my first file. When I try to open a new
template
> file I get the message below-
>
> "Dreamweaver stores templates in the root folder of a
site, but there
> are no sites defined. Please add a site"
>
> What does this mean? How do I find the templates? I am a
total
> dreamweaver newbie trying to learn the program.
>
> Thanks
It's not a problem with templates.
You have to create a site for your website - F1 will show you
how to do
that. Once you have a site created, you will be able to
create new template
files, and they can write themselves to the correct part of
the site.
HTH,
Pete.
Peter Connolly
http://www.acutecomputing.co.uk
Derby
UK
Skype ID: acutecomputing

Getting Started with Wireless: Wireless configuration on 877W router - STUC

Just letting you know that I've already posted an identical post under "Getting Started with Wireless" but don't feel that I'm getting any attention so I made another post. Thank you.
Hi all
I have a Cisco 877W router running IOS v 12.4(15)T3. Have been trying to configure wireless to run WPA-PSK and is stuck at the final stage. Spent a lot of time configuring the router using CLI but ended up using the Web GUI interface. I was able to configure the wireless settings (I think) but failed when connecting to the router from WinXP-SP2 and was wondering if you have any suggestion for me. I've ran the following debugs on the router:
VNRouter#sho debug
DHCP server event debugging is on.
dot11:
802.1X module WPA/WPA-PSK/CCKM key management debugging is on
dot11 Syslog debugging is on
Below is the error message when connecting wirelessly
*Mar 4 18:46:25.655: *** Not encrypted dot1x packet from 001b.771a.dbad has been discarded
VNRouter#
*Mar 4 18:46:25.659: %DOT11-6-ASSOC: Interface Dot11Radio0, Station VNRouter 001b.771a.dbad Associated SSID[VN-WiLess1] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
VNRouter#
*Mar 4 18:47:25.571: *** Not encrypted dot1x packet from 001b.771a.dbad has been discarded
*Mar 4 18:47:25.575: *** Not encrypted dot1x packet from 001b.771a.dbad has been discarded
*Mar 4 18:47:25.575: *** Not encrypted dot1x packet from 001b.771a.dbad has been discarded
*Mar 4 18:47:25.579: *** Not encrypted dot1x packet from 001b.771a.dbad has been discarded.
I've created two VLANs (and tied these two vlans to 2 separate SSID) on this router for a reason and so far has not been able to connect to any of them (SSID). I've also attached the config so you can have a look. Thanks in advance for your help.

The configuration looks fine. In most cases, the connectivity issues with WPA-PSK is due to the mismatch in PSK on the Client and the AP. Try re-entering the PSK key on both the router and the client and check if you are seeing any issues.

Help Needed with getting Started With Office 365 Development C# Rest API

We have a O365 Tenant Setup with a Federated Active Directory Setip we want to be able to right code that will connect to our tenant and perform basic CRUD operations against it (ex. Creating mail boxes)
The problem is we want this to be contained in a CLR trigger In SQL so say if a new user is added to our user table then we would create a new AD account for that user and also create a mailbox.
But I cannot find and example on how to connect to Office 365 using the REST API (Not the SDK because you can not add the connected service to a class library) and before the required actions that we need to do. All the example I have found are with the
SDK API and/or require window 8 and that is also not an option.
Please help I do not know where to start, and I would love to see some examples done in c# and not using the SDK.
Thanks,
Andrew Day

Hi,
>> Instead of SharePoint URLs I would use the O365 API URL?
Yes, in my sample code, I was accessing the File resource by using the O365 File API. In your case, you need to acquire the token to access the Mail resource and use O365 Mail API.
By the way, I think the article
Understand Office 365 app authentication concepts will help you to understand the authentication process in Office 365 Development.
>> Why can I not use the SDK API with a class Library?
Actually, you are able to reference the Office 365 .NET SDK in the class Library. But the class library project type was not supported by Visual Studio Office 365 Development Tool. As a workaround,
you can reference the SDK manually in your project.
Since your original question is about “getting started with Office 365 Development C# Rest API”, if you have more questions about the Office 365 SDK, I will suggest you posting a new thread
to discuss the Office 365 SDK. It will involve more other community members to share their ideas and experience on a specific a question and for others who had a similar question could also find the valuable information quickly.
Regards,
Jeffrey
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to disable "getting started with Firefox" web page when starting Foxfire?

Every time I open Firefox I get the additional web page "getting started with Firefox" and do not know how to disable it. Can you help?

The page may be set as an additional home page, the following link shows how to check and set your home pages - https://support.mozilla.com/kb/How+to+set+the+home+page

How do I eliminate the "getting started with firefox" page that appears everytime I click on my home page?

Every time I click on my home page I get an additional window "Getting Started with Firefox". How do I eliminate this?
== This happened ==
Every time Firefox opened
== Immediately

See [[How to set the home page]]: Firefox supports multiple home pages separated by '|' symbols.
See also this article for more suggestions: [[Firefox has just updated tab shows each time you start Firefox]]

What do I need to know to get started with Windows 10?

QuestionWhat do I need to know to get started with Windows 10?
AnswerWindows 10 likely looks familiar in some ways to past Windows users whether they're most familiar with Windows 8, Windows 7, or earlier versions of Windows.
To read about what's new with Windows 10, check the sections below. To learn about Windows 10 and see it in action, you can watch this video:
Desktop and Start menu
When you start your Windows 10 computer, you'll see the desktop. Like in Windows 7 and earlier versions of Windows, you'll see the Start button in the lower-left, which opens the Start menu.
The new Start menu combines aspects of Windows 7's Start menu with Windows 8's Start screen. On the left are important links, including Settings, as well as applications you use often. On the right are Modern UI app tiles. The Start menu also contains a button for power as well as a button to expand the Start menu to a full screen view.
Cortana
Next to the Start button is the Cortana search field. Cortana is a personal assistant that can help you find answers, solve issues, and search for files. You can click in the box to typer to her, click the microphone to speak to her, or press the Cortana button on select Toshiba laptops to speak to her.
You can learn more about Cortana here:
How do I use Cortana in Windows 10?
Action Center
The Action Center can be used to view notifications and access settings quickly. Hold the Windows key and press the 'A' key to open the Action Center.
Notifications are shown at the top, and toggles for various settings are located at the bottom.
On touchscreen devices, you can swipe in from the right to open the Action Center. The toggles on the bottom are sized so that you can press them with your thumb easily.

Install 7. Don't bother with applying drivers and such, just reboot again from DVD and install again, it will see the existing system and this time activation will be possible.
Vista is mess, takes longer etc. Hope you have SP1 version of 7. And for Vista, only SP2+ are even supported now, by MS.

Getting started with SDK 2.0 &open Ni

Similar Messages

Maybe you are looking for