Getting 'successfully installed' message when it's not installed
Hi all
I'm new to the board and very confused about something...I've tried uploading the new edition of flashplayer and while it says the upload was successful, it's not showing up when I check my programs. Help. Thanks.
P.S. I'm not techno savvy, so any kind soul who might have the solution to my problem, could you post in step by step format. Thanks again.
Thanks
Joanna
Hi and AMEN!
I'd love to know who's in charge at IE, if anyone! These people should get together.....Internet Explorer and Adobe and come up with some common plan where one group knows what the other is doing and how best to help computer users without confusing us all to death!
Bravo for trying. Have you made any headway? If so, let me know. If not...best of luck. I am tempted, some days, delete my current site and start from scratch. See what happens. Worst case scenario; neither side in power (I.E. or Adobe) really knows what they're doing and basically has us jumping back and forth. If they do, I wish they'd share that info.
joanna
Similar Messages
-
How to get a error message when sms is not sent to a mobile no.
Scenario: once po is finally released sms is sent to the respective vendor.This has been done. But, Now the client want to see the error details(i.e, the mobile no. to whom sms i s sent) if the sms is not sent to any mobile no. and also wants a z program through which they can schedule the background job of resending the sms to those no. who have not received.
As i tried a lot with this but unable to go ahead, so plz help me <removed by moderator>
TABLES:LFA1.
DATA : WA_FINAL LIKE ZME_EKKO_RLS ,
IT_FINAL TYPE STANDARD TABLE OF ZME_EKKO_RLS.
DATA GV_MSG TYPE STRING.
DATA GV(16) TYPE C.
DATA : GV_RETURN TYPE STRING.
DATA: HTTP_CLIENT TYPE REF TO IF_HTTP_CLIENT .
DATA: WF_STRING TYPE STRING ,
RESULT TYPE STRING ,
R_STR TYPE STRING .
DATA: RESULT_TAB TYPE TABLE OF STRING.
*BREAK-POINT.
IF SY-TCODE = 'ME29N'.
IF SY-UCOMM = 'MESAVE' AND I_EKKO-PROCSTAT = '05'.
SELECT * FROM ZME_EKKO_RLS INTO TABLE IT_FINAL
WHERE EBELN = I_EKKO-EBELN .
IF NOT IT_FINAL[] IS INITIAL .
LOOP AT IT_FINAL INTO WA_FINAL .
IF WA_FINAL-SSTAT = '02' .
CONTINUE.
ELSEIF WA_FINAL-SSTAT = '01' .
SELECT SINGLE * FROM LFA1 WHERE LIFNR = WA_FINAL-LIFNR.
IF SY-SUBRC = 0.
GV = LFA1-TELF1.
ENDIF.
CLEAR GV_MSG.
CONCATENATE 'Dear Sir/Madam, PO No:' WA_FINAL-EBELN ' Dtd:' I_EKKO-BEDAT ' with reference to vendor no:' WA_FINAL-LIFNR 'has been released on you''.' 'Detail hardcopy will be sent to you soon' INTO GV_MSG.
CLEAR WF_STRING.
CONCATENATE
'http://182.18.143.30/sendsms.php?username=edhik&password=194385&'
'sender=TSIL&mobile='
GV
'&type=1&message='
GV_MSG
INTO
WF_STRING.
CALL METHOD CL_HTTP_CLIENT=>CREATE_BY_URL
EXPORTING
URL = WF_STRING
IMPORTING
CLIENT = HTTP_CLIENT
EXCEPTIONS
ARGUMENT_NOT_FOUND = 1
PLUGIN_NOT_ACTIVE = 2
INTERNAL_ERROR = 3
OTHERS = 4.
CALL METHOD HTTP_CLIENT->SEND
EXCEPTIONS
HTTP_COMMUNICATION_FAILURE = 1
HTTP_INVALID_STATE = 2.
CALL METHOD HTTP_CLIENT->RECEIVE
EXCEPTIONS
HTTP_COMMUNICATION_FAILURE = 1
HTTP_INVALID_STATE = 2
HTTP_PROCESSING_FAILED = 3.
*if sy-subrc = 0.
*call method http_client->get_last_error
*importing
*code =
*message = gv_errortext.
*endif.
CLEAR RESULT .
RESULT = HTTP_CLIENT->RESPONSE->GET_CDATA( ).
REFRESH RESULT_TAB .
SPLIT RESULT AT CL_ABAP_CHAR_UTILITIES=>CR_LF INTO TABLE RESULT_TAB .
REFRESH RESULT_TAB .
SPLIT RESULT AT CL_ABAP_CHAR_UTILITIES=>CR_LF INTO TABLE RESULT_TAB .
LOOP AT RESULT_TAB INTO R_STR.
CONCATENATE R_STR SPACE(1) INTO GV_RETURN.
write:/ r_str.
ENDLOOP .
IF NOT GV_RETURN IS INITIAL .
UPDATE ZME_EKKO_RLS
SET: SMSTX = GV_MSG ,
sstat = '01'
WHERE EBELN = WA_FINAL-EBELN .
IF SY-SUBRC = 0 .
COMMIT WORK .
ENDIF.
ENDIF .
ENDIF .
ENDLOOP.
ENDIF .
ENDIF.
ENDIF .
Edited by: Vinod Kumar on Aug 1, 2011 2:58 PMHi
when you call the webservce to send the sms using the method if it is successful it will return as success and if any issue it will raise the error which you have to handle, but it will not give you confirmation wether sms is sent ,
regards
m.a -
I get an error message when trying to start iTunes. I've tried reinstalling 3 times with no change.
Message: iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126)
Any ideas would be appreciated!Have a look Here https://discussions.apple.com/docs/DOC-6562
-
I purchased Elements 13. When I tried to install it I get the error message that it is not supported by Vista. What do I do now?
If you can't install Windows 7 or higher or get a new computer with Windows 7 or higher, you won't be able to run Photoshop Elements 13.
There are many inexpensive refurbished or "off lease" computers available at very reasonable cost. Here is one example (scroll down):
Computers & Tablets, Desktop PCs, All Desktop PCs, Refurbished - Newegg.com -
When I plug me ipad to itunes i get the error message that it is not supported and that i have to go to itunes and get "itunes installer" and re-install. if i do this will i loose my files and music?
No, you should not lose anything.
-
When I close out Firefox, and return later to use the internet, I click on Firefox and it gives me a message stating that Firefox is already running and needs to be closed before restarting or reboot my system. This occurs every time Firefox is closed and attempt to re-start it,,, not only at times,,,, EVERY time.
I have tried removing Firefox from my system and re-installing to fix this issue however,,, this did not work. After re-installing, I still get the same message when attempting to restart Firefox.
I have also tried Ctrl, Alt, delete to open the task manager and find there is no task to close.
I do not have any problems when using IE, I prefer to use Firefox as it is faster and crashes less than IE.
I am very frustrated at having to reboot my system each time I want to use the internet.
How can this problem be repaired?There are various causes for this error, see [[Firefox is already running but is not responding]] for details.
-
After updating my MacBook Pro to yeosemite I want my old desktop picture back. I did a full back up before the install. I found the "Settings" folder in Time machine but when I try to open it I get an error message saying "You can not open this folder. It is in TimeMachine".
Can you browse the Time Machine drive from Finder?
If you can and you know where the picture was stored ie on your desktop you can browse through the folder structure to the picture copy it and paste it somewhere on your new install before right clicking it and 'set as desktop background' -
when i try to open itunes i now get an error message saying i do not have the required components installed error number 45075?
Just in case the component being referenced is not part of iTunes but is rather part of one of the other related programs, it might be worth trying a complete uninstall/reinstall of iTunes and related componentry, as per the following troubleshooting document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
When I try to uninstall iTunes I get a message saying iTunes 64 msi can not be located and I should enter an alternate path. How would I know where it it is? I get the same message when trying to install the update to iTunes 10.6.1.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I have a windows HP computer with windows 7 installed, when I try and update and restore my phone, I get an error message of there is not enough space on your computer to restore your phone. Any suggestions and help is appreciated.
You need to discard or save to an external disk and then discard some of the stuff we all tend to keep forever (movies, music, pictures, docs, apps no longer used, etc.). A clogged up disk also does not function ideally either.
-
When going through the download process with social monkee and getting to the point of adding it to firefox I get the following message: 'Social Monkee could not be installed because firefox cannot modify the needed file'. How can this be fixed?
That is usually caused by a missing unpack directive (<em:unpack>true</em:unpack>) in the file install.rdf of that extension.
See https://developer.mozilla.org/En/Updating_extensions_for_Firefox_4.0#XPI_unpacking
----- -
I have an iPod Classic and work on Windows 7.
i recently installed iTunes 10.5 update and since then i cannot play any of the songs in the Library - i get the following message
"The song could not be used because the original file could not be found. Would you like to locate it?"
what happened to all my songs (almost 2000) How can i get them back into my music library?
Please help - i do not want to spend another week downloading all my cd's onto my computer !!!!!Try my script FindTracks. Select a few of the missing files to start with then run the script. Choose No at the first prompt so that you can check how it works track by track, then confirm or edit the location of the media folder where your files are. Once you are happy with how it behaves let it process larger numbers of tracks automatically.
tt2 -
I recently installed a new hard drive on my PC, downloaded iTunes, updated the software on my iPod touch and now I get this error message when I try to sync: "you do not have enough access privileges for this operation." It never did this before, whether it's the upgrade in software or something in iTunes, but it's very frustrating, since I'd like to add more things to my iPod.
See:
iPhone - not enough access privileges: Apple Support Communities -
I get an error message when downloading ITunes "could not access the network location" %public%\desktop\?
windows vista 32 bitTry the following user tip:
"Could not access network location %PUBLIC%\Desktop\" install errors -
I keep getting an error message when I try to sync my new iPhone 5s to iTuines.
It says my computer is not authorised.
When I authorise it successfully, and try and sync again, the same error message appears.
Help?Hello Chad176
If you are constantly Authorizing your Apple ID, the article below will assist with getting that resolved for you.
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
IOS error messagge - I keep getting the following message when I try to update my iPad2 - unable to install update, an error occurred installing IOS 8.1.2. How can I fix this?
Which way are you trying to update? WiFi or iTunes? In either case, I would try restarting/rebooting all devices and then try again.
IF you are using iTunes, eject your iPad, quit iTunes, reboot your computer and reset your iPad by holding down on the sleep and home buttons until the Apple logo appears on the screen. After the iPad starts up, connect to iTunes and try again. You may also want to disable your firewall and antivirus software when you try to update using iTunes. Sometimes those will interfere with the download.
If you are using WiFi, reset the iPad as described above and try again.
If WiFi updating will not work, try using iTunes, if iTunes will not work, try using WiFi.
Maybe you are looking for
-
I have music files all over the place and want to put them all in itunes with no duplicates and get rid of all the rest. how can I do that? Some of my playlists are missing songs. I would like to move the playlist back to itunes from my ipod without
-
I locked my phone and forgot the password. How can I unlock?
My phone is locked and I can't remember the code. how can I unlock it?
-
Hello, where is the Aperture 'plugin' folder? I want to install a lens correction plugin for my wide angle lenses. Thanks
-
Forcing logonui to reenumerate credential providers
I am trying to determine if there is an accepted method to get logonui to reenumerate the available credential providers.  The scenario I am trying to address is if a new credential provider is installed on a system when logonui is active.  In thi
-
Hi There are two table in VKOA Table 01 - CustGrp / Material Grp / Acct Ket (access number given is 10) Table 101 - Sales org / Acct Assg Grp / Acct Assgmnt / Dest Country / Acct Key (access number given is 05) for Sales order 5560, its booking sales