Getting "Table %TEMPLATE does not fit into window" error

Hello,
I am trying to print a form to an old EPSON DFX-9000 dot matrix printer and am getting the error message Table %TEMPLATE does not fit into window".
This only happens when I go to that printer.  I can print fine to a laser printer.
I have tried creating a new device type and copying over the format from the laser printer, playing with the format, changing formats, ect.
I have adjusted the size of the window that my template cannot allegedly fit into but still no luck.  I have checked the height and width of the template and the window many, many times and still get the same error.
Has anyone seen this before?  Please help.   Thanks.

Hi James,
You need to see the width and height of the Page Format which you have set in Form Attributes of your smartforms.
What ever you create should be within this width and height .
So accordingly adjust the width and height of your windows and components within them
Regards,
Dep

Similar Messages

  • Error:   Table TEMPLATE_HEADER does not fit into window.

    Hello Experts ,
    I met a very strange problem.
    I am printing a process order using smartform.
    for other process nrs , print perfect.
    But only for a certain precess nr, I got a popup error 'Table TEMPLATE_HEADER does not fit into window.'
    At beginning , I suppose my table line extend the mainwindow width. But infact , no!
    I try to comment every node one by one, I found the reason: I put a table line into a loop node, if I add a text node which has something inside, it will triger this error. (only for this process order, others works fine)
    so , does someone met this error before ?
    Please help me!!
    Regards
    Kevin

    Hi Kevin,
    Which printer and device type do you use? For line printers and device type(driver STN2) like e.g. EPESCP9, the SAP system
    must use spaces and empty lines to place the text. This is a limitation of the ESC/P printer languagesa per SAP note #19807.
    For this, the Smartforms rounds all coordinates(of the table cells and the window). Only after this step it checks, whether the table fits into the window. So if the table size is quite close to the window size size, it may happen on line printers that the table doesn't fit anymore.
    If this is the reason for your problem, the error message should vanish if you increase the size of the window containing table TEMPLATE_HEADER a little in your smartform.
    Regards,
    Aidan

  • Table TEMPL_FW6 does not fit into window.

    Hello All,
    My smartform driver program is giving me this error. What could be the problem .can anyone help me out in this.

    Hii
    this error u can get it in smartform itself
    change the width of ur template & when u specifying the text check the line types
    any of them ur missing
    reward points if useful
    regards
    Jaipal

  • Table does not fit into window.

    Hi Guys,
    When I execute the Smartforms I get this message ? '
    "Table does not fit into window."   any guess why this message ?
    Regards

    >
    P R Raghu wrote:
    > "Table does not fit into window."   any guess why this message ?
    > Regards
    If TABLE does not fit WINDOW try to take it through the DOOR LOL
    Doesn't the error seems self explanatory to you?
    Regards
    Karthik D

  • Template does not fit into the window

    Hello all,
    <b>Template does not fit into the window (Message no. SSFCOMPOSER173)</b>
    I am getting the above error in when i try to preview my smartform.
    The template is in footer window. I have only 3 lines in the template.
    And the size of template is less than window size.
    I do not understand why this error. This happened when there are many line items in the main window. With less no. of line items it worked well.
    If you have any suggestions Please help.
    Thanks.

    Hi,
    Please check the following points:
    1. Font size and font family.
    2. Line spacing
    3. Allignment.
    4. Left and right margin
    Deserve Rewards.
    regards.

  • Table temp_bed_cess does not fit in to wondow vf02

    Hi,
      no print preview for a particular billing document number in VF02. but for the remaining billing documents the print preview is displaying. when clicked on ' issue output to ' screen is returned to the same screeen. This is a production server issue.
    the error is template does not fit into window

    Dear Sir,
        Thank you for all your replies,
      the window with same name is attached in two pages and thier dimensions are different.
    the window & template dimensions are as:
    window first page  
    height 2.90 cm
    width 12 cm
    regarding template
    c1 from 1 to 1     1 LN             9 cm  3 cm
    c2 from 2 to 2      0.96 LN       12 cm
    window second page
    height 2 cm
    width 12 cm
    regarding template
    c1 from 1 to 1     1 ln             9 cm  3 cm
    c2 from 2 to 2      0.96 ln       12 cm
    here the window height is more than the template total cells height, but why it is showing template does not fix in to the window.where as for other billing document , it is working fine, only for 6111108680.
    please help me.
    thanks & regards,
    Dastagir

  • Window does not fit into page

    Hi all,
    I'm creating a smartform which prints one internal table consists of 36 fields. In table line type i have mentioned the 36 fields. First four are of 4CM and other 32 fields of 2CM width. So in total i have mentioned as 80 CM. 
    But its showing an error like 'Main window does not fit into Page'.  
    What could be the mistake?
    Can anyone help me in this..
    Regards,
    Shanthi

    Hi,
    U have to adjust the 36 fields into 21 cm by Allocating Space accordingly.
    if Your Space is small then data will be displayed in the next line.
    And display The data in Smallest  font possible.
    Regards
    sandipan

  • I recently bought a Macbook Air and a Thunderbolt Display and the laptop's power is supposed to come from the display, but the power cable on the display does not fit into the Macbook Air.

    I recently bought a 11" Macbook Air and a 27" Thunderbolt Display.The laptop's power is supposed to come from the display when connected, but the power cable on the display does not fit into the Macbook Air.

    If your MBair is a 2012 model, it has a Magsafe 2 power connection.  The monitor probably has the old magsafe connection.  If this is the case, you need this adapter.
    http://store.apple.com/us/product/MD504ZM/A?fnode=5a

  • Transportation error - SIPT_INSERT_FI (SIPT_DATA|11) does not fit into the existing function group ((SIPT_DATA_FI|02))

    While performing a system maintenance task we came across this Transportation error - SIPT_INSERT_FI (SIPT_DATA|11) does not fit into the existing function group ((SIPT_DATA_FI|02))
    Can someone help us in resolving this
    Thanks and regards
    RS

    Please expand the log also please check the SAP note 1835436
    Regards
    Aneesh

  • Movie does not fit preview window

    Sorry if this is a dumb question, but I cannot figure it out.
    I made a short movie clip with my iPhone 5. Imported it into iMovie (it looks perfect when I preview it from the event library) and then dragged that clip to a new project. Then when I play the video from within the project, it has been heavily cropped, ie the movie does not fit in the preview window.
    I have tried changing the aspect ratio of the project and this made no difference. I also change the setting File > Project Properties > Initial Video Placement to Fit in Frame.
    Any help appreciated.

    A lot of people who shoot video on the iPhone will hold the phone vertically oriented (portrait orientation). For shooting movies, you will get the best results when you rotate the phone 90 degrees to landscape orientation.
    iMovie will always edit in landscape orientation (long side on top and bottom, short side on the sides) because this is the way TV screens work.

  • X102e - Hard drive does not boot into Windows

    Hi, I was trying to reinstall Windows on my X120e.
    I tried clean install with Windows 7 Professional, but the hard drive does not boot into the Windows once it has done the first phase of the install(you know, the copying part)
    After the restart done by Windows, it goes as far as "Starting Windows" but does not actually boot into the Windows.
    When I try to install Windows with another HDD, the device works well, but I can't swap the HDD because it is not 7.5mm think HDD.
    Is there any possibility the HDD will work trough any software-level process? The HDD works fine as external HDD when tested with external HDD adapter, and installs well. only problem is that it fails to boot
    Kim
    W540( ), Helix(Sold), Tablet 2(Sold) Tablet 2( ), X120e(Sold), X201 Tablet, X41 Tablet(Sold), X41, X32*4, 701C*4

    Thank you for reply.
    This is not exactly the issue. I was talking about the HDD originally installed in the PC.
    The PC successfully recognizes the external disk I used to install the Windows, but the problem was that I did not boot into the "First boot" screen, which basically works on the already installed data.
    As of now I have installed an SSD and is working fine. strange part is that HDD works just fine when I use it as an external HDD via adapter. Strange huh?
    Kim
    W540( ), Helix(Sold), Tablet 2(Sold) Tablet 2( ), X120e(Sold), X201 Tablet, X41 Tablet(Sold), X41, X32*4, 701C*4

  • Datagrid Scrolling Problem.. Does not fit into Parent Container..

    Hi All,
           I have a module and module contains only one datagrid. I am adding this module to tab navigator dynamically in the next index. I am using Text as Item renderer in the datagrid and the row height will change depending upon the data diplyed on the Text. When the data populate in datagrid the datagrid going beyond the containers layout. i.e height is not fit into parent container. I am using Canvas as parent container .. Please find the below attached pictures and you will get to know what is my problem?
    Please help me to get out from this issue.. It is urgent..

    Thanks for quick reply
                   Here I am adding this module to canvas and the canvas is also dynamic . As you said "customize the measure() method in Text control and return the correct measuredHeight based on the explicitWidth."  what is the relation between Text control height and datagrid? Datagird should take it's parent container width and heights.  I am newbie to this Flex.. can you please explain it briefly. And if you have any Other way to do this please tell me .. it is very helpful to me.. Can you please post cusomized measure method if possible. please

  • Multiple heading rows in a table template does not come across

    Hello,
       I've created a table with two heading rows with different content (please see attached file).
       When I import this table format into a new Frame doc, the first heading row gets repeated twice.
       Any ideas about how to fix this?
       I have even tried to make one heading and the other a footer row (at the bottom) but even that formating does not come across in the template.
       Any help would be greatly appreciated.
    Thanks,
    Anupam.
    Using : Framemaker 9 on Windows XP

    Anupam,
    The import into a new document has nothing to do with what you are seeing. If you look in the table designer, you will see that there is nothing there that specifies that the table must have two heading rows. When you insert a table and select the ids_register table format, the dialog box lets you specify the number of heading rows; it can even be one.
    Note that if you insert a second table in your original document and specify you want two heading rows, you get the same result: two heading rows that are both like the first one.
    Without know the real details, I am guessing that the table format is capable of remembering only one heading row format.
    I know this is not what you wanted to hear, but maybe someone else has a workaround to this.
    Good luck,
    Van

  • 3.3V CardBus Card does not fit into T500?

    I got a new T500 2055WVJ last week with Win 7 64bit.
    I have only one problem. The cardbus slot (it must be one, because the device manager says RICOH compatible CardBus controller) does not like my Adaptec SCSI CardBus card (Type II). Other PCMCIA cards (5V, non Cardbus) in the same slot fit in perfectly, but the 3.3V SCSI card goes in but stops about 5 mm before they is completely in. The same card works in all other laptops including my old T60, where is slides in and is recognized perfectly. Also CompactFlash cards inside an PCMCIA adaptor fit in perfectly on my new T500 and appear as ATA devices.
    Looking into the slot with a lamp shows that on the left side, the notch for differentiating between 5V and 3.3V cards only allows 5V cards. But the CardBus spec says, that Cardbus cards must be 3.3V. You can see a picture of the difference between cardbus and pcmcia pccards here: http://de.wikipedia.org/w/index.php?title=DateiCCard_CardBus.jpg&filetimestamp=20061112220451 (you see the different notch on the right side).
    So whats wrong here? Does the new Thinkpad really does not like 3.3V CardBus cards, although the controller is CardBus?
    Solved!
    Go to Solution.

    Congrats on getting it to work!
    Thinking back, I remember how reluctant I was to force a card into my new T500. I do think there is something slightly off about the slot, because the same card had been working fine in my old T42. (Or maybe the T42 was similarly stiff when it was new way back when?)
    Anyway, congrats again!
    Results of Your Ideal Business-Class Laptop survey, concluded 2009-07-29.
    Did someone help you?
    Say thanks! with a kudo.
    Even better: Pay it forward, help someone else.

  • SQL Developer 2.1.1.64 - code template does not work in Windows Vista

    I have been trying to import a code template in SQL Developer 2.1.1.64 / Windows Vista using the following steps:
    1. Import template (xml) file using "Preferences > Database > SQL Formatter > Import..." option. Pressed "OK" button.
    2. Clicked on "Preferences > Database > SQL Formatter > Oracle Formatting".
    I expected to see the new profile under "Profile" drop-down-list-box, but it does not appear there.
    I tried putting the template (xml) file under various locations, including:
    (a) C:\Users\<user_name>\
    (b) C:\Users\<user_name>\AppData\Roaming\SQL Developer\
    Please let me know any suggestions that you may have.
    Thanks in advance.

    I got it to work. In step 1 that I mentioned, "OK" button should not be pressed; go to step 2 without pressing "OK" button.

Maybe you are looking for