Getting technical error

Getting oops technical error while making skype recharge. I m getting this error after clicking buy credit button.
Please note: I have already put $8.99 recharge on 28th november 2014, I want to put the same again. Kindly do the needful.

Satish,
Just so you know, this BADI "links" SD module to FSCM credit management. If you use the right code in this BADI, it copies over credit information on to the sales order such as Credit Account, Risk Class and Credit representative code. (Later this risk class, order's credit control area and credit group is used to look up the appropriate line in OVA8 settings)
Now you could be getting this error for any of the issues:
1. If the business partner is not created for the customer for which you're trying create a sales order (The credit account (sales order header) should have a relevant BP already) Check if the BP is correctly created.
2. Next if the credit data has been maintained for the BP in credit management.
3. XI/PI connectivity issues etc
Check if all this is maintained and you should be good. Cheers

Similar Messages

TS3297 I keep getting the error 306 cannot connect to the iTunes Network when downloading songs on iTunes. I've tried all the troubleshooting steps from the forums and my technical issues are still unresolved. I have Windows 7. Please help!!

I keep getting the error 306 cannot connect to the iTunes Network when downloading songs on iTunes. I've tried all the troubleshooting steps from the forums and my technical issues are still unresolved. I have Windows 7. Please help!!

iTunes Store loads partially or returns "Error 306" or "Error 10054"
Proxies, parental control settings and software, security or filtering software, or a bad iTunes Store cache can cause this.
To address proxies, Remove Internet Options proxy settings ( http://support.apple.com/kb/TS1490 ) and connect to the Internet without a proxy.
To reset iTunes Store cache:
In iTunes, choose iTunes > Preferences (Mac) or Edit > Preferences (PC).
Click the Advanced tab.
Click the "Reset cache" button.
Click OK and see if the issue is resolved.
Adjust Parental Controls in iTunes:
Open iTunes.
Access iTunes preferences:
On a Mac: From the iTunes menu, choose Preferences.
On a Windows PC: From the Edit menu, choose Preferences.
Click the Parental Controls tab.
Remove restrictions on Parental Controls.
For more information on parental controls or content filtering software, see iTunes 10.5 for Windows: May see performance issues and blank iTunes Store.
http://support.apple.com/kb/TS4123?viewlocale=en_US

Getting Msg: Error when calling Credit Management: Technical Error

Hi All,
While creation of sales order in ECC, i am getting a message "Error when calling Credit Management: Technical Error"
Can you help me in this case
Regards,
Satish

Satish,
Just so you know, this BADI "links" SD module to FSCM credit management. If you use the right code in this BADI, it copies over credit information on to the sales order such as Credit Account, Risk Class and Credit representative code. (Later this risk class, order's credit control area and credit group is used to look up the appropriate line in OVA8 settings)
Now you could be getting this error for any of the issues:
1. If the business partner is not created for the customer for which you're trying create a sales order (The credit account (sales order header) should have a relevant BP already) Check if the BP is correctly created.
2. Next if the credit data has been maintained for the BP in credit management.
3. XI/PI connectivity issues etc
Check if all this is maintained and you should be good. Cheers

I keep getting this error message "The iTunes Library file cannot be saved. An unknown error occurred (-50)" I'm not at all technical, so a simple response would be appreciated. Thanks

I keep getting this error message "The iTunes Library file cannot be saved. An unknown error occurred (-50)" I'm not at all technical, so a simple response would be appreciated. I have already downlaoded the latest iTunes software and reinstalled it but the problem remains and I am unable to add additonal music to my library.

make sure the media folder in iTunes > Preferences > Advanced is not blank or out side of your c dirve

Getting "SAPSQL_ARRAY_INSERT_DUPREC" error while creating a new layout

Hi,
I deleted a layout from a level. When I tried to create a new layout with the same technical name, I was getting a run time error.
Name of the error : SAPSQL_ARRAY_INSERT_DUPREC
Exception : CX_SY_OPEN_SQL_DB
I went to ST22 and analyzed the dump. I found that the entries for the layout that I deleted were still present in the following 2 tables:
1) UPP_PARAMT
2) UPP_ELEMT
My questions are:
1) Is there any possibilities that I can retrive the layout that I deleted with the help of the entries present in the above tables?
2) Can I remove the entries from these two tables so that I can create a new layout with the same technical name?
Thanks,
Seetharaman V

Hi Matt
Thanks for your comments. I was getting this error while trying to save the new layout i created and not during the creatiion.
Thanks,
Seetha

Getting AADSTS50020 error on microsoft login page when using Azure Active Directory Authentication

We have implemented Azure Ad single sign on using auto generated code from Visual studio 2013 with organization account authentication and its working fine.
The problem is when user is logged in in azure management portal with his live account and in other tab he try to open our app, then he directly gets below error on Microsoft login page.
Additional technical information:
Correlation ID: 78e13474-6f92-40ec-b463-91e36a6dae84
Timestamp: 2015-04-14 12:27:20Z
AADSTS50020:
User account '[email protected]' from external
identity provider 'live.com' is not supported for application
'https://xxxxx.onmicrosoft.com/xxxx'. The account needs to
be added as an external user in the tenant. Please sign out and sign in
again with an Azure Active Directory user account.
It works fine if I log out from management portal. Is there any way to resolve this issue without forcing user to log out from live account(management portal)?

I assume you created a web application using VS2013 which uses the WS-Federation protocol.
The behavior that you are seeing is expected Single-sign-on because you are logged in using the live account in the management portal.
For WS-Federation, there is no current way for a caller to specify they want to force a fresh login, so the behavior is always the equivalent of LoginBehavior.Normal.
The user will need to either sign-out or use an in-private session in the browse.
If you switch to openID connect(sample at
https://github.com/AzureADSamples/WebApp-OpenIDConnect-DotNet) and use the “prompt=login” query paramerter in the sign in request, this will force a fresh login.

I am getting an error message that "A copy of Firefox is already open. Only one copy of Firefox can be open at a time" and I don't have any copy open.

I am getting an error message that "A copy of Firefox is already open. Only one copy of Firefox can be open at a time" and I don't have any copy open. How do I correct this problem? I really like firefox because it runs many technical programs on the web that do not work with safari. I have FireFox version 32.0.1 installed on my MacPro PowerBook OS X 10.7.5. My activity monitor does not show any FireFox activity, so do not know what it is seeing

This worked, I used the method described in this link http://forums.mozillazine.org/viewtopic.php?t=365156, and opened the Mozilla profile screen with the terminal on my mac, using the language given in the links. Then I duplicated my original profile to save the bookmarks, etc. Put them in a folder listed Duplicate profile with the date. With the open profile screen, I deleted my original profile, created new profile folder and then a new profile. Note that profile cannot be created in the system library, it must be created on the disc, because the library will not allow writing into it. After I created my new profile folder, I dragged all my old information into it, and it worked. Firefox closed and the error disappeared. You must be VERY careful to make sure Firefox is closed anytime you are doing anything with the profile folders. I think that is what caused my original problem.

"A technical error during invocation : Could not invoke service reference" Error message while calling a service from BPM

Hi Experts,
We are facing a issue while calling a Automated activity from BPM process, the process gets suspended and the BPM logs says "Process XYZ suspended, A technical error during invocation: Could not invoke service reference name fdhueoegghejietyhsjk6886 Component name ABC " We have already checked the mapped service reference and provider system. Gone through the below link, but no help.
http://http://wiki.scn.sap.com/wiki/display/TechTSG/Sending+a+message+from+SAP+NetWeaver+BPM+process+to+PI+fails+via+automated+activity?original_fqdn=wiki.sdn.sap.com
Any pointers or suggestions to fix up this issue will be highly appreciated. Thanks in advance.
Regards,
Mohit Jaju

The details/ID in NWDS Service Reference must exactly match the SOA configuration. Sometimes it's possible you have changed the reference or the group itself and something changed to become mismatched.
It's possible they don't match - but the SG itself will show green in NWA since the service exists and responds on the target system. Does the ID listed in the error match what is shown in the NWDS project?
regards, Nick

Getting Runtiime error while exporting to Excel 97-2000 format (URGENT)

Post Author: net_us2001
CA Forum: Exporting
Hello Everyone,
This is my first time in this forum.
I am getting runtime error while exporting the report in EXCEL 97-2000, but exporting perfactly in MS-EXCEL (Data only) format.
I found the reason is, using expression (formula) for formatting phone number as shown below.
On table field "abPhone",
used "formula = PhoneFormat() " expression on format field -> common tab -> display string .
Intead that i have used fumula e.g. test1 and used same expression, then it was exporting perfactly..
Having above problem if i use expression to supress group header and report header.
So let me know if anyone can help, why it was giving error in first case.
Thanks in advance
Thanks,
Nitin

Hi,
This is the Technical limitation of ABAP list export to local file.
ALV grid greater than 1023 characters per line will be split into 2 lines.
To prevent a line break occuring when you download the list as a local spreadsheet file, you must reduce the width of the list in ALV. You can do this either by hiding columns or by changing the column widths in the ALV. Take care that the column heading characters also dont exceed 1023 characters. This will work.
Thanks
LG

Technical Error when uploading a file using java 1.6.0_17

When I'm uploading a mp3 file size 84.01 Mb i get the following message:
Warning-Security
Name:MyFTPUploader
Publisher:JavaAtWork
From:http://mixes.djfez.com
A box is ticked if you always trust the content from this publisher and then there is the option to run or cancel.
The Message then states that The digital signature was generated with a trusted certificate but has expired.
I then choose to run the application.
I then choose the file from my hard drive to upload(a mp3 file 84.01 Mb), select upload and then the file gets to about 5-7% uploaded and then a message appears Technical Error with an x in a 8 sided pink 2D figure.
Here is what is shown on the Jarva Console:
Java Plug-in 1.6.0_17
Using JRE version 1.6.0_17-b04 Java HotSpot(TM) Client VM
User home directory = C:\Users\Owner\Downloads
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
Reading certificates from 10215 http://mixes.djfez.com/admin/myftpuploader-standard-signed-v131.jar | C:\Users\Owner\AppData\LocalLow\Sun\Java\Deployment\cache\6.0\61\66a2727d-46f2f117.idx
MyFTPUploader Standard Edition version 1.3.1
© Copyright JavaAtWork 2005-2008. All rights reserved.
Reading certificates from 11 http://mixes.djfez.com/admin/labels.jar | C:\Users\Owner\AppData\LocalLow\Sun\Java\Deployment\cache\6.0\27\7b49829b-46cb6a8e.idx
220 ProFTPD 1.3.0 Server (DreamHost FTP) [66.33.200.61]
331 Password required for mixes.
230 User mixes logged in.
200 Type set to I
550 uploads/2707/: No such file or directory
550 uploads/2707/: No such file or directory
250 CWD command successful
257 "/uploads/2707" - Directory successfully created
250 CWD command successful
257 "/uploads/2707" is current directory.
227 Entering Passive Mode (66,33,200,61,148,196).
150 Opening BINARY mode data connection for LittleJohn_Happier_Beats_Vol_1.mp3
Dec 7, 2009 9:40:45 PM - FTPUploadTask - upload() - java.net.SocketException: Connection reset by peer: socket write error
Dec 7, 2009 9:40:45 PM - FTPUploadTask - logout() - java.net.SocketException: Connection reset by peer: socket write error
Operating System is Windows Vista Home
If anyone could help me overcome this error it would greatly be appreciated.

If anyone could help me overcome this error it would greatly be appreciated. Java questions here concern programming, not product support.
Connection reset by peer: socket write errorThat says that the server, where the file comes from, closed the connection.
The most likely possibilities
1. The client software is not correctly communicating with the server. Solution: fix the client
2. The server is not correctly handling this request. Solution: fix the server
3. The server doesn't want to talk the the client. Solution: fix both the server and the client.
From the above unless you are in a position to fix something then you do not have an option.
If you yourself cannot fix either of those then this is a vendor problem and you must contact the vendor (creator) of the software client and/or server. You would do that somewhere besides this site.

Getting an Error in F.2A which uses a script .

Hi ,
I am getting an Error when i am using the F.2A . I am using a Variant that was created by the Functional Person .
As i go an execute it with particular Company Code . it gives the print out pop up .
and when i click on print view/ print instead of printing the Interest Calculation doc it gives me the follwing message
Document header for company code SEA Doc. Number 2000022597 not found
Document header for company code SEA Doc. Number 90010159 not found
Document header for company code SEA Doc. Number 2000022497 not found
Document header for company code SEA Doc. Number 90010157 not found
Document header for company code SEA Doc. Number 2000022496 not found
Does any one have an idea what is happening why is giving me this kind of a message ?
<removed by moderator> please can u suggest
Edited by: Thomas Zloch on Sep 7, 2011 10:55 AM

I might be wrong, but those error messages dont point towards a form problem.
in my eyes you should recheck that with your technical consultant.

Why do I get an error when trying to install PS cs5 on my macbook pro? Error code 6

i am trying to reinstall PS cs5 on my laptop and I get the error code: 6. Here is the entire message alert.
Please uninstall and reinstall the product.
If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen.
Error: 6

Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5
Mylenium

Error in XI: Technical Error

Hi,
We have one ECC 6 and one PI 7.0 in our landsacpe, recently we have configured SLD throught SLDAPICUST.
RFC is also working fine.
But when ever users are entering in VA01, they are getting a pop-up asking for login detials for the PI system, but the users in ECC don't have login in PI.
When they click on cancel, we are getting "Error in XI: Technical Error".
Message no. UKM_PI008.
Anyone has any idea about this error and how to solve it.
Thank you,
Siv

HI
There is no relationship betweenSLD config and error you are receiving.
As mentioned you might be interfacing with XI/PI for pushng/pulling some information , in that case it is necessary to provide username and password.
May be you want to concerns the responsible person who has configured the interfacing scenario
Regards,

How to get Application Error descriptions

Hi, all:
Our interface has ECC system involved.
The Message Monitoring in local integration engine shows that there are many messages with application errors.
I would like to export all messages with application error:
include message ID and error text.
Right now, I can export the data from Message monitoring window, but I can not get application error from exported spreadsheet. anyone has idea how to do it ?
Thanks in advance !
Liang Ji

Hi, venkata:
Thanks for you reply.
Our scenario is
ThirdPartySystem ---> SOAP ---> XI ---> ECC (ABAP Proxy)
Technically, the scenario is running perfect.
After go-alive, there are many application errors because of the data problem, e.g.:
Cannot create order. Service order number already exist
We know these problem are caused by conversion, now I would like to track each message, so I exported to spreadsheet from Message monitoring.
But the exported spreadsheet does not include Application Error text, this is the reason I post the question here, do you have idea about it ?
Thanks
Liang

I'm running Mac OS X version 10.6.8 How come I get this error message "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms." When I Try to download a FREE trail?

I'm running Mac OS X version 10.6.8 How come I get this error message "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms." When I Try to download a FREE trail?

Hi Brizill,
Please refer to the help document below to understand the technical specifications for the same:
System requirements | Photoshop
Regards,
Sheena

Getting technical error

Similar Messages

Maybe you are looking for