Getting the Dreaded Panic error

Ok...i have a very bizarre situation. I have a 12inch PB and have received the panic error upon startup for over a year. I bought a firewire HD and installed to it a year ago and have been running off the external drive ever since. I decided to replace the internal drive. My problem gets very weird because I can still boot to the external drive fine holding down option at startup, but cannot boot to the OSX install disc. I have tried a couple different install discs but get the same panic error:
panic(cpu ) caller 0x002E54BC): Unable to find driver for this platform: "PowerBook6,1".
I formatted the internal drive and am trying to install Tiger. But, when i hold down C at startup, it looks for the disc and then goes to the above panic. Since i can boot to the external HD installation, i dont think it is an airport or RAM issue. Anyone have any thoughts or suggestions?
Ruby

ok...so i took my firewire HD and cloned it to the new internal HD. Everything boots fine now, however when i try to boot from the OSX install disc, it gives me the panic error. Whenever i try to boot to any disc, it gives me the same panic error. When i take out the disc and restart the computer, it boots to the newly cloned internal drive. There must be something wrong with the logic board that it is giving me the panic error. Anyone know what to do at this point?
Ruby

Similar Messages

I'm trying to download some purchased TV shows to my iPad Air. I keep getting the dreaded Download Error Tap to Retry Message. I've signed out of iTunes and back in. I've updated my software. I have plenty of room for them on the Air. Help?

I'm trying to download some purchased TV shows to my iPad Air. I keep getting the dreaded Download Error Tap to Retry Message. I've signed out of iTunes and back in. I've updated my software. I have plenty of room for them on the Air. We are taking a long flight this week, and I wanted to have something new to watch. I've read through lots of threads on this but I can't seem to find a good solution that I haven't tried.
If I can get them to download them on my iMac computer, can I then transfer them to my iPad? How is this done? (Please pardon an older lady's ignorance, and thank you for any assistance!)
Jody

Hello jody5758
Continue your troubleshooting with the article below. IT will walk you through checking the Date & Time as well as checking the settings of your router to ensure a proper connection.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
-Norm G.

After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely

After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely." What do I do now? This is an iMac and I'm running 10.6.8.

Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it. See below for how to clone a drive.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
You may be able to backup your data if you have an erased external drive you can use. Before you do the above but after you have opened Disk Utility you can try to clone your drive:
Clone using Restore Option of Disk Utility
1. Open Disk Utility.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
       it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
      the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Now this will only work if the drive is accessible and can be cloned by Disk Utility. Otherwise, you would need to access your drive from another Mac that you can connect via Firewire - Target Disk Mode.

HT203175 I have attempted to sync my new iPod touch 4th gen. with my current PC running Windows XP and everytime I attempt it I get the dreaded blue screen, here are the error codes- 0x0000007E; 0XC00000005; 0X00000000; 0XBA51B7C8; 0XBA51B4C4 any suggesti

I have attempted to sync my new iPod touch 4th gen. with my current PC running Windows XP and everytime I attempt it I get the dreaded blue screen, here are the error codes- 0x0000007E; 0XC00000005; 0X00000000; 0XBA51B7C8; 0XBA51B4C4 any suggestions?

In the course of your troubleshooting to date, have you worked through the following document?
iPhone, iPad, or iPod touch: Windows displays a blue screen message or restarts when connecting your device

2.1 and the dreaded 0xE800003A error

After upgrading to 2.1 I am now stuck in the dreaded 0xE800003A error and can no loger put my app on my iphone. Keep in mind it worked before the upgrade. Please help.
Heres what I have done so far.
1) Upgraded to the latest SDK that supports 2.1, both device and SDK are on 2.1 compatible versions
2) On SDK checked the 2.1 build, also tried 2.0
3) Deleted all my certs and provisioning files and remade new ones
4) Restored device (itouch)
5) info.plist file I made sure it said com.company.appname, I also tried mynum.com.company.appname and com.company.appname.*
6) Entitlements.plist I tried get-task-allow checked and unchecked
7) Tried an older version that worked before Version 2.1
I am so lost on this, please someone help. I was working for months just fine, then all of a sudden 2.1 has crippled me.
Thanks in advance, GenCode

Also heres the organizer log:
Mon Oct 13 09:20:54 unknown afcd[947] <Error>: user mobile has uid 501
Mon Oct 13 09:20:54 unknown afcd[947] <Error>: mode is 0x41e8
Mon Oct 13 09:20:54 unknown mobileinstallationproxy[949] <Error>: installembeddedprofile: Skipping the installation of the embedded profile
Mon Oct 13 09:20:55 unknown securityd[941] <Error>: mobile_installat[949] SecItemCopyMatching: missing entitlement
Mon Oct 13 09:20:55 unknown mobileinstallationproxy[949] <Error>: verify_executable: Could not validate signature: e8008015
Mon Oct 13 09:20:55 unknown mobileinstallationproxy[949] <Error>: preflightapplicationinstall: Could not verify /var/tmp/install_staging.x63yfj/<MyAppName>.app/<MyAppName>
Mon Oct 13 09:20:55 unknown mobileinstallationproxy[949] <Error>: install_application: Could not preflight application install
Mon Oct 13 09:20:55 unknown mobileinstallationproxy[949] <Error>: handle_install: Installation failed

I'm getting the kernal panic screen when I put in DVD

My iMac G5, 2 GB has been slow, and occasionally getting the "restart your computer" screen. I ran the Apple Hardware Test on it twice. It passed both times, so I decided it must be software. I proceeded to do a clean install of the OS. Now I'm getting the Kernal Panic screen just as the computer recognizes the disk and is about to launch the installer. I've been reading the forums on Kernal Panic. Could be RAM memory. But could it also be the optical drive if its slow to spin at first?
What info on the "Panic" screen would tell me where the problem is?
Here's the message:
panic(cpu 0 caller 0x002DEC28): Unable to find driver for this platform: "PowerMac12.1"
Latest stack backtrace for cpu 0:
          Backtrace:
                    0x00095698 0x0002683C 00x0002DEC28 0x002BDFB4 0x002BDD7C 0x002BE7E4 0x002BEE50 0x000A9814
Proceeding back via exception chain:
          Exception state (sv=0x00528280)
                    PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000;
                    XPC=0x00000000 (Unkown)
Kernal version:
Darwin Kernal Version 8.2.2: Mon Aug 22 18:43:11 PDT 2005; root:xnu-792.11 .obj-1/REAEASE_PPC
No debugger confirured - dumping debug information
MSR=00001030
Latest stack backtrace for cpu 0:
          Backtrace:
                    0x00095698 0x00095D98 0x0002683C 0x002DEC28 0x002BDD7C 0x002BE7E4 0x002BEE50 )x000A9814
Proceeding back via exception chain:
Exception state (sv=0x00528280)
          PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000;
                    XPC=0x00000000 (Unkown)
Kernal version:
Darwin Kernel Version 8.2.2: Mon Aug 22 18:43:11 PDT 2005; root:xnu-792.5.11.obj-1/REALSE_PPC
panic: We are hanging here...

ylsteve wrote:
My iMac G5, 2 GB has been slow, and occasionally getting the "restart your computer" screen. I ran the Apple Hardware Test on it twice. It passed both times, so I decided it must be software. I proceeded to do a clean install of the OS. Now I'm getting the Kernal Panic screen just as the computer recognizes the disk and is about to launch the installer. I've been reading the forums on Kernal Panic. Could be RAM memory. But could it also be the optical drive if its slow to spin at first?
What info on the "Panic" screen would tell me where the problem is?
Here's the message:
panic(cpu 0 caller 0x002DEC28): Unable to find driver for this platform: "PowerMac12.1"
Latest stack backtrace for cpu 0:
          Backtrace:
                    0x00095698 0x0002683C 00x0002DEC28 0x002BDFB4 0x002BDD7C 0x002BE7E4 0x002BEE50 0x000A9814
Proceeding back via exception chain:
          Exception state (sv=0x00528280)
                    PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000;
                    XPC=0x00000000 (Unkown)
Kernal version:
Darwin Kernal Version 8.2.2: Mon Aug 22 18:43:11 PDT 2005; root:xnu-792.11 .obj-1/REAEASE_PPC
No debugger confirured - dumping debug information
MSR=00001030
Latest stack backtrace for cpu 0:
          Backtrace:
                    0x00095698 0x00095D98 0x0002683C 0x002DEC28 0x002BDD7C 0x002BE7E4 0x002BEE50 )x000A9814
Proceeding back via exception chain:
Exception state (sv=0x00528280)
          PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000;
                    XPC=0x00000000 (Unkown)
Kernal version:
Darwin Kernel Version 8.2.2: Mon Aug 22 18:43:11 PDT 2005; root:xnu-792.5.11.obj-1/REALSE_PPC
panic: We are hanging here...
Your title is a little confusing; are you getting the message ONLY when you put a DVD in, or does it also happen when starting the computer up?
If it's the DVD, is it the OS DVD? Are you sure you are using a PPC DVD and not an Intel DVD? I recall the same panic screen on my own G5 1st gen when I mixed up my Intel DVD with my PPC DVD.
The first line of your panic (panic(cpu 0 caller 0x002DEC28): Unable to find driver for this platform: "PowerMac12.1") was very similar to mine, except mine had "panic(cpu 0 caller 0x002DEC28): Unable to find driver for this platform: "PowerMac8.2"

IOS 5 seems to work, but when I connect the ipad to my macbook, i get the message that itunes was interrupted when restoring. I try to restore again and I get the message "An error occurred while restoring this iPad (-50)." What should I do?

iOS 5 seems to work on my ipad, but apparently something went wrong when restoring. I lost music and movies, and when I connect the ipad to my macbook, I get the message that itunes was interrupted when restoring. I try to restore again and I get the message "An error occurred while restoring this iPad (-50)." What happened and what should I do?

I have had the same issue since day 1 of the ios5 installation. I always hit "Cancel" and then the iPad eventually shows up again in iTunes. Then a few hours later, I get the same message again. Annoying, but I've not found a way around it.

I am unable to install Itunes on Windows 7 as I am getting the message "an error occured during the installation of assembly "Microsoft VC80.CRT Type ="win32" version="8.0.50727.6195",public key token 1fc8b 3b 9a 1e 18e 3b",processorArchitecture="x86".Ple

I am unable to install Itunes on Windows 7 as I am getting the message "an error occured during the installation of assembly "Microsoft VC80.CRT Type ="win32" version="8.0.50727.6195”,public key token 1fc8b 3b 9a 1e 18e 3b”,processorArchitecture=”x86”.Please refer to Help and Support for more information:"HResult 0x800736FD

I found htis other post https://discussions.apple.com/thread/3401328?start=0&tstart=0
I also found this in another post
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

I am unable to install Itunes on Windows 7 as I am getting the message "an error occured during the installation of assembly "Microsoft VC80.CRT Type ="win32" version="8.0.50727.4053,public key token....."HResult 0X8007054f

I am unable to install Itunes on Windows 7 as I am getting the message "an error occured during the installation of assembly "Microsoft VC80.CRT Type ="win32" version="8.0.50727.4053,public key token....."HResult 0X8007054f

I found htis other post https://discussions.apple.com/thread/3401328?start=0&tstart=0
I also found this in another post
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

I cannot download itunes on my pc. I get the message "An error occurred during the installation of assembly. "microsoft.VC80.CRT.type=8 0.50727.4053". publicKeyToken="1fc8b3b9a1e18e3b". processor rArchitecture=amd64".

i cannot download itunes on my pc. I get the message "An error occurred during the installation of assembly. "microsoft.VC80.CRT.type=8 0.50727.4053". publicKeyToken="1fc8b3b9a1e18e3b". processor rArchitecture=amd64".
Please help. Have just bought a new ipod and cannot use it !!! Thank you.

Hi Gurmo,
HRESULT: 0x80073712 means ERROR_SXS_COMPONENT_STORE_CORRUPT, and it is one of the error codes listed at this
KB article.
I suggest you run the System Update Readiness tool and check if the error still persists.
There is a similar thread for your reference.
https://social.technet.microsoft.com/Forums/en-US/0b3d0479-b9c0-4551-a623-1519ce7584af/error-when-installing-sql-server-2008-r2-rtm-on-windows-server-2008-r2-foundation?forum=winservergen
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

When I try to download the newest version of iTunes, I get the message : "An error occured during the installation of assembly "policy 8.0 Microsoft VC80.CRT type= "win32-policy".version="8.0.50727.6195.public Key Token="1fc8b3b9a1e18e3b.processorArchitct

When I try to download the newest version of iTunes, I get the message : "An error occured during the installation of assembly "policy 8.0 Microsoft VC80.CRT type= "win32-policy".version="8.0.50727.6195.public Key Token="1fc8b3b9a1e18e3b.processorArchitecture = "x86" Please refer to help and support.
Ok I cant find a way to fix this so I basically cant use my Verizon Iphone 4 because it wont connect on an old version...

OK. You may have to reinstall everything from scratch but follow following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

I am getting the below mentioned error in the weblogic console. Jun 26, 2014 12:14:45 PM IST Error javax.enterprise.resource.webcontainer.jsf.application BEA-000000

Hi,
After migrating to Spring webflow 2.4.0 , I am getting the below mentioned error in the weblogic console.
<Jun 26, 2014 12:14:45 PM IST> <Error> <javax.enterprise.resource.webcontainer.jsf.application> <BEA-000000> <Unable to determine expected return type for java.util.List()>.
It doesn't affect the application but not able to find the cause for it.
Regards,
Sneha

After many hard working days.i finally found the error cause,i needed to make weblogic datasource also ADF doesnt work on internet explorer browser,it works on safary.hope it helps somebody

Installing Adobe Reader & i get the following message "error 1324 path my documents or volume invali

installing Adobe Reader & i get the following message "error 1324 path my documents or volume invalid". Can anybody help. I have just installed windows 8 on my lptop..

Please share the sanpshot of error message and MSI log created.
Just check if there is any user folder(my documents) redirected. Remove that re-direction and then try re-install
else try installing via MSI installer present at
ftp://ftp.adobe.com/pub/adobe/reader/win/11.x/11.0.00/en_US/

When starting a rental movie, I get the message: "An error occured loading this content, please try again later". Any ideas how to solve this issue?

When starting a rental movie, I get the message: "An error occured loading this content, please try again later". Any ideas how to solve this issue?

Firstly, I should have typed speedtest.net previously.
Now that's an interesting comment you make, out of interest do you have any purchased HD movies in your iTunes collection, if so, do they play on the Apple TV with your new tv.

Today is April 10, 2013. I try to login to iTunes connect and I keep getting the message "An error has occurred processing your request. Please try again later or send an email for assistance." It never tells us what email address we need to write to.

Today is April 10, 2013. I try to login to iTunes connect and I keep getting the message "An error has occurred processing your request. Please try again later or send an email for assistance." It never tells us what email address we need to write to.

The problem was solved by Apple Technical Help. The process is as flollows:
1. Open Safari
2. Menu item Safari-Reset Safari - remove all website data - reset
3. Now if you try to login on iTunes connect it will work.

Getting the Dreaded Panic error

Similar Messages

Maybe you are looking for