Getting the Ericsson F3507g card to work in a T500 running Windows 2008 Server 64bit

Folks
I seem to have the correct drivers for the card but when I try to enable them I get a blue screen every time with the error BAD_POOL_CALLER.  This is now happening every time Windows starts as it tries to load the new drivers.
Does anyone know if the card is supported under Windows 2008 Server 64 bit and if so, how do I get it working?
Regards
Simon
(UK)

Bump. Does anyone have any idea of what i can do to get wireless working on my windows partition?

Similar Messages

  • I need the link to download Adobe Flash Player 64 bit for Windows 2008 server

    I need the link to download Adobe Flash Player 64 bit for Windows 2008 server

    http://get.adobe.com/flashplayer/
    The page has javascript to determine OS and bit rate. it WILL provide you the correct download.

  • Getting the 4060 DMM card to work

    Hello,
    I am trying to get the 4060 card to work in LabVIEW - I just want to take a simple current measurement.
    The NI DMM SFP works fine, so it is clearly not a hardware problem.  I would have used the NI-DMM Switch/Express block, but it does not support 4060.
    Does anyone has a sample VI (or can explain how to make one) that will just take a current reading and, for example, wire it to a numeric output.
    Thanks,
    Dan

    Hi Dan,
    There are several examples in the start menu under National Instruments/NI-DMM/Examples, if you installed them that is.
    You can also find examples for instruments on the "Getting Started" page when you launch Labview, just click on "Find Examples..."
    Here is one from my Labview 8.2 installlation.
    Brian
    Attachments:
    Measure DC Current.vi ‏24 KB

  • How do you get the two step security to work with virtual machines running under parallels?

    I use Quickbooks running on a virtual PC under Parallels.  I have always have Quickbooks interface with Thunderbird on the PC side to email invoices to customers using my apple email account.
    Once I switched to two-step verification security, Apple doesn't recognize the "new" computer trying to access my mail account, but it also doesn't send any kind of code to a second device to authorize the access.
    For now, I've had to switch back to the traditional security and the above process immediately works again 9without asking me any security questions).
    Is there a way to have Apple recognize the virtual PC (or any other non-Mac computer) with two-step verification security?

    You have to go to your Apple ID and generate application specific passwords.
    Apple ID - Manage

  • Will iTunes work with a laptop running windows 7 and 64bit?

    Trying to get a system started and I'm not sure if iTunes will work with a windows 7 laptop. It has 64 bit not 32.

    Yes, iTunes is compatible with 64-bit Windows 7 systems.

  • Problems with Ericsson F3507g card - does anyone understand Access Connection​s log files?

    I am having big problems getting an f3507g mobile broadband card working on a T500 running XP Pro.
    Have had problems with several machines all supplied in the same batch and it turns out that the BIOS needs to be reset to defaults post installation of the card for it to be properly recognised by the OS.
    Anyway, all machines are now fixed with the exception of one....
    Everything looks okay on the surface - the F3507g card is showing under Device Manager, just to be sure I've reinstalled Access Connections and loaded drivers for the card.  I know that the driver install was successful because it pinged up with the standard driver install success message - 'Windows found new hardware...' about half a dozen times immediately following the install.  Having done the driver install I attempted connection and the CA Internet Security Suite Firewall popped up asking whether I wanted to accept the device as a 'Safe' device - clicked yes to that.
    However, attempting connection never works
    I've tried enabling logging and the log file produced together with a fault report is here.
    I have tried the SIM card under test in another machine and it works. I have also swapped the HDD out of another identical brand new machine and it works with the hardware including the Ericsson card - so the issue has to be software related...
    I could reimage but the user will loose some graphic design application software which is very difficult to reinstall.
    Hope someone that understands Access Connections WWAN debug log files or has had a similar experience might be able to point me in the right direction...
    Many thanks

    @ Deadloss,
    have you checked the power settings in the cards properties? Not that windows is turning it off?
    Are you using a factory image or your own custom image, I'm thinking that maybe a reimage might help ??
    @ schm1tty,
    T-Mobile SIMs work fine, what problems are you having? Maybe you could start a new thread so as not to hijack this one.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Can't get my iTunes gift card to work.

    Hey
    I can't get my iTunes Gift card to work I got the first part right but when I need the serial number it wouldn't work I entered it right everytime but still wouldn't work so I got out of the page and started again and I entered the Activate Numbers and it said that the card hasn't properly been activate seek help.... What do I do?

    If the error message you are receiving is that your iTunes Gift Card in inactive, you should contact iTunes Store Customer Support via the Contact Support link on the lower-left side of the iTunes support page and include attached digital photos or scanned images of the sales receipt and both sides of the gift card.

  • I can not get the oil paint filter to work in photoshop CC

    Can anyone help me with getting the oil paint filter to work in photoshop CC. I have a high end gaming card for video but it still does not seem to be available. Help. please!

    You must be running Photoshop CC 2014.
    The Oil Paint Filter was present in Photoshop CC but removed in CC 2014
    Photoshop: Spring Cleaning | PHOTOSHOP.COM BLOG
    Photoshop Help | New features summary
    As a Cloud member you can still keep CC installed for when you need the Oil Paint filter.

  • Problem with iTunes. I have Windows 8 on a new laptop. Installed latest version of iTunes. Can play music in My Library but when I click on Itunes Store I get the message "iTunes has stopped working. A problem caused the program to stop working correctly.

    I have a new laptop with Windows 8 as operating system. Installed latest version of iTunes ontop computer. I can play music in My Library but when I click on iTunes, I get the message " iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify if a solution is available."
    Anyone know what is the cause and if there is a resolution? Have tried to re-installing iTunes and have also tried restoring laptop to an earlier date.

    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/ts4062
    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    iTunes Store: Associating a device or computer to your Apple ID
    http://support.apple.com/kb/ht4627
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • I am running windows 7. My itunes keep shutting down on me. I keep getting the message itunes has stopped working What can I do?

    I keep getting the message itunes has stopped working. A problem has caused itunes to stop working correctly. What can be the cause?

    Hello Main Event,
    Thank you for using Apple Support Communities!
    I found this article while researching iTunes quitting unexpectedly on Windows 7 and feel it will help to resolve the issue here.
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1717
    It starts with troubleshooting 3rd party plug ins, then moves on to account troubleshooting if needed.
    Open iTunes in Safe Mode to isolate any inference with plug-ins or scripts not manufactured by Apple.
    Hold down the Shift and Control keys while opening iTunes. If performed correctly, you should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
    After clicking Continue, determine whether the issue you were experiencing persists in Safe Mode.
    If you see the same issue while iTunes is in Safe Mode, proceed to the Create a New User Account section below. If you do not experience the same issue, consult iTunes: Troubleshooting issues with third-party iTunes plug-insfor steps on how to remove third-party plug-ins.
    Take care,
    Sterling

  • I keep getting the message itunes has stopped working I can't even open itunes I have tried uninstalling and installing, starting in safe mode but nothing seems to work. Please can anyone help me

    I have recently bought a new laptop with windows 7 and when i have tried to install and open itunes i keep getting the message 'itunes has stopped working' itunes then shuts down before i can do anything to fix it. This happens every time I try to open itunes. I have tried uninstalling itunes and reinstalling it, starting itunes in safe mode. Nothing seems to work. Please can anyone help.

    If and when I finally manage to open it, as soon as I click on a movie to watch, the message "itunes has stopped working" comes up.
    Try the following user tip with that one:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • How do I get the built in microphone to work on my IMac?  Camera works fine, but I can't record voice.

    How do I get the built-in microphone to work on my IMac?  Camera works fine, but I can't record sound.

    I always assummed that the mic was part of iSight (intertwined?).  The mic is situated right next to iSight.  It would seem to me the solutions would be the same some what.
    Regarding the OP, I also suspect his/her problem is hardware.  It's rather unusual for the internal mic to not work yet the iSight does.

  • I got a iphone 5 but it does not work on my MacBook with Mac OSx 10.5.8  it says i need OSX 10.6.8 but it will not download because I need OSX 10.6 but it would load either. How do I get the older operating system to work with the IPhone5?

    I got a iphone 5 but it does not work on my MacBook with Mac OSx 10.5.8  it says i need OSX 10.6.8 but it will not download because I need OSX 10.6 but it would load either. How do I get the older operating system to work with the IPhone5?

    You don't. Since you have an Intel Mac, buy a Mac OS X 10.6 DVD from the online Apple Store.
    (71894)

  • I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

    I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

    Hi Hardy Tasso,
    Are you seeing this problem since first launch of PSE13 after installation or recently?
    Please try:
    Keep Ctrl + Alt + Shift keys pressed while launching PSE13 Editor and click OK on the dialog that comes next.
    Thanks,
    Anwesha

  • I have Adobe Photoshop Elements 10. It came installed on my HP Desktop. I am can not get the warp text tool to work. It has worked in the past. Once I click warp text, the little window does not pop up, and if I try to do anything else after I click warp

    I have Adobe Photoshop Elements 10. It came installed on my HP Desktop. I am can not get the warp text tool to work. It has worked in the past. Once I click warp text, the little window does not pop up, and if I try to do anything else after I click warp text, it wont let me. Just sounds the ding, alert, can still slightly navigate the program but can not use any other tools after clicking warp text. I just have to open task manager and close the program. not sure if I'm doing something wrong or maybe I just need to uninstall and re install. Having trouble finding out how to uninstall and reinstall because the program came pre installed on my desktop.

    It actually sounds like the warp text window is opening off screen.
    Resetting the photoshop elements 10 preferences should fix it.
    *Press and hold the Shift+Ctrl+Alt keys just after you start the launch of the photoshop elements 10 editor
    *Keep holding the keys down until you get a dialog asking if you want to delete the adobe photoshop elements setting file
    *Press Yes

Maybe you are looking for