Getting the error: Error while receiving by HTTP error code: 110

Hi,
I have developed an interface which actually gets data from SCM system and in BPM to gets additional data from R/3. There are five synchronous call to this R/3 to get different sets of data. I am using only one communciation channle from BPM to R/3. The interface works perfectly OK in the development system. When the interface is migrated to the test system I found that the four calls work perfectly fine while the last call error out as below and the J2ee server goes down:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!--  Call Adapter
  -->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
  <SAP:Category>XIServer</SAP:Category>
  <SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
  <SAP:P1>110</SAP:P1>
  <SAP:P2 />
  <SAP:P3 />
  <SAP:P4 />
  <SAP:AdditionalText />
  <SAP:ApplicationFaultMessage namespace="" />
  <SAP:Stack>Error while receiving by HTTP (error code: 110, error text: )</SAP:Stack>
  <SAP:Retry>N</SAP:Retry>
  </SAP:Error>
Any input/help will be appreciated. I have tried increasing timeout/connection alive time but still not get resolved.
Thanks in advance,
Sushma

Hi Prateek,
Thanks. But this note I have checked before and this seems not related. I actually found out the system logs in SM21 and saw the "Operating system call recv failed (error no. 10054)". What I did then is I seach notes related to this error and found a numebr of SAP notes. And I have informed the Basis guys to look into the notes and the system logs. They are working on this and they are deleting the old messages which have errored out. They are suspecting the system memory or too many old messages would have caused this issue.
If you have any knowledge of why this error would have occurred please let me know.
Thanks,
Sushma

Similar Messages

  • Error while receiving by HTTP (error code: 110)  ?

    Hi Experts,
    I am working on IDOC to file Scenario.
    I am getting this error in SXMB_MONI. What may be the reason.
    <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
      <SAP:P1>110</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error while receiving by HTTP (error code: 110, error text: )</SAP:Stack>
      <SAP:Retry>A</SAP:Retry>
      </SAP:Error>
    Best Regards,
    Anil

    Check these threaads:
    Re: XI Error when upgraded to SP14 (Error Code 110) CLIENT_RECEIVE_FAILED
    Regards,
    ravi

  • Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED

    Hi experts,
    I have a big issue in production server,
    the Queues are stuking in smq2 " command to tRFC/qRFC: execute LUW again"
    if i am reprocess or press F6 it is going manually.
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
      <SAP:P1>400</SAP:P1>
      <SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText><html><head><title>Application Server Error</title> <style type="text/css"> body { font-family: arial, sans-serif;} </style> </head> <BODY text="#172972" link="#808080" vlink="#808080" alink="#8e236b" bgcolor=white leftmargin="0" topmargin="0" marginheight="0" marginwidth="0"> <table height="61" width="100%" border="0" cellspacing="0" cellpadding="0"><tr><td background="http://xidist:8000/sap/public/icman/img/bluebar_tile.gif" height="30"><table> <tr> <td width=5></td> <td width=20% nowrap><font face=arial size="-1" color=white>SAP NetWeaver Application Server </font></td><td width=75% align="right" nowrap><font face=arial size="-1" color="white"><a href="http://help.sap.com/">Help </font></td><td width=5% nowrap></font></td> </tr></table> </td><td rowspan=2 width=122 height=61 valign=top><img src= "http://xidist:8000/sap/public/icman/img/theme.jpg" width=122 height=61 border=0 alt="SAP"></td> </tr><tr><td background="http://xidist:8000/sap/public/icman/img/graybar_tile.jpg" height="31">  </td></tr> </table> <br><br> <table width=800> <tr><td width=50 nowrap> </td><td> <H2><b>404 Resource not found</b></H2><br>Partner not reached<br><br><hr> <table border="0"> <tr><td>Error:</td><td>-20</td></tr> <tr><td>Version:</td><td>7000</td></tr> <tr><td>Component:</td><td>ICM</td></tr> <tr><td>Date/Time:</td><td>Wed May 14 15:50:24 2014 </td></tr> <tr><td>Module:</td><td>icxxconn.c</td></tr> <tr><td>Line:</td><td>2341</td></tr> <tr><td>Server:</td><td>xidist_GXI_00</td></tr> <tr><td>Error Tag:</td><td>{004654a1}</td></tr> <tr><td>Detail:</td><td>Connection request from (110/28816/0) to host: xidist, service: 50000 failed (NIESERV_USED) EX-T110, U28816, 001 PIAFUSER, 10.1.57.50, 15:50:24, M0, W1, , 1/0</td></tr> </table> <p></p> </td></tr></table> <table><tr><td width=50 nowrap></td> <td nowrap><FONT SIZE=-1><a href="http://www.sap.com/">&copy; 2001-2009, SAP AG</a></FONT> </td></tr></table> </body></html></SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED)</SAP:Stack>
      <SAP:Retry>N</SAP:Retry>
      </SAP:Error>
    Regards,
    Kiran polani

    Dear Sriram Ramani,
    in ths case some scenarios are working good. proxy to soap, idoc to soap and jdbc to proxy, proxy to jdbc all are working with out error.
    but my problem is in Soap to RFC case..
    for all RFC communication channels are working but some time it is throwing RFC_COMMUNICATION_ERROR and messages are stucks in smq2 with retry.
    when i check with retry error with in sxmb_moni log showing ICM_HTTP_CONNECTION_FAILED with error code 400.
    not for all signals for few signals for some time..
    Why it is happening i can't understand.
    in repository it is saying Repsitory object hmi failed and address already in use.
    is there any problem with loading IR objects.
    Please suggest me good suggestion for this type of issue what can do for this to resolve.
    Regards,
    Kiran Polani

  • HTTP Receiver Adapter - HTTP client code 110 reason error when sending

    Hi,
    I am getting the following error when using the HTTP adapter as a receiver to perform an HTTP Post in a destination system :
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIAdapter</SAP:Category>
      <SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT</SAP:Code>
      <SAP:P1>110</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>HTTP client code 110 reason</SAP:Stack>
      <SAP:Retry>N</SAP:Retry>
      </SAP:Error>
    Does anyone know what causes this error and more importantly how to trace it ?
    Cheers
    Colin.

    hi Colin,
    Check in SMICM if your HTTP service is running.  Also in RFC destination one of the parameter (SSL client Certificate) might be wrong which could also cause this problem.
    Also check this thread:-
    XI Error when upgraded to SP14 (Error Code 110) CLIENT_RECEIVE_FAILED
    Have a look into this SAP Note - 897583
    Regards.
    Praveen

  • Timeout error in ECC "INTERNAL.CLIENT_RECEIVE_FAILED Error while receiving by HTTP (error code: 402 , error text: ICM_HTTP_TIMEOUT)"

    Dear Experts,
    I am very critical situation due to this timeout error in ECC, please help me as much as you can. Go-live date is very near, but I am not getting any clue why this error is occurring. our ECC system is EHP 4, and PI is dual stack 7.4
    My scenario is synchronous ABAP proxy to HTTP_AAE. request is triggering from ECC via proxy and reaching to third party (bank) through PI, I am reviving the response back in PI from bank. But from PI to ECC the response is not reaching. So in ECC after the defined Timeout limit its getting timed out.
    I have tried everything by increasing the timeout in ECC more than 15 minutes in HTTP_TIMEOUT under SXMB_adm in ECC, but nothing worked, even if I am increasing for half an hour then also its getting timeout after half an hour.
    response from bank to PI is coming within 30 to 40 seconds, but PI is not sending the response back to ECC.
    This is classical scenario, and I have checked the trace via SXMB_Moni in PI as well as in ECC, in ECC its showing the timeout error, but in PI i did not see any trace for this error.
    I have read many thread on SCN for the same error, and everywhere it has been suggested to increase the timeout, and I have tired that, it didn't help me.
    All ABAP proxy configuration has been done as follows.
    RFC destinations in ECC
    LCRSAPRFC(TCP/IP)
    SAPSLDAPI ((TCP/IP))
    G type destination to path "/sap/xi/engine?type=entry"
    G type destination SAP_PROXY_ESR to path "/rep"
    All the destination connection test is working fine.
    but i have a doubt on G type destination(AAE_XDJ) to path  "/sap/xi/engine?type=entry" which is returns the status code 500 with message "Empty HTTP request received", is it ok with 500 ?
    Configuration in ECC Integration Engine configuration is as follows
    Questions
    How the message gets pushed to ECC from PI, once the message received in PI, I believe by G type RFC destination on path  "/sap/xi/engine?type=entry" , please clarify.
    How to trace this, if message is not getting pushed to ECC, I mean I have checked the trace in PI XSMB_MONI, but didn't get anything for this error. In ECC SXMB_moni only I am able to the timeout error.
    Please expert help me as soon as you can, this error really effecting me badly in front of management
    Thanks,
    Farhan

    Hi Hareesh,
    I configured the scenario based on ICO, and again I received the same timeout error in ECC.
    I am really sick with this error, and I have raised the OSS message to SAP. Meanwhile I just want to double check my entire configuration with you. Please see the below configuration (for classical) for ABAP proxy to HTTP_AAE, and let me know if anything is wrong.
    Request structure (ECC->PI->Bank)
    <?xml version='1.0' ?>
    <PaymentInfoMessage>
    <PaymentInfoRequest>
    <CompanyCode>Partner01</CompanyCode>
    <BankCode>BSFRSARI</BankCode>
    <StartDate>2006-07-09T00:00:00</StartDate>
    <EndDate>2006-07-09T00:00:00</EndDate>
    <TransactionType>940</TransactionType>
    </PaymentInfoRequest>
    </PaymentInfoMessage>
    Response Structure (Bank->PI->ECC)
    <?xml version="1.0"?>
    <PaymentInfoMessageResponse>
    <PaymentInfoResponse>
        <TransactionType>940</TransactionType>
        <SequenceNum>1</SequenceNum>
        <ReceiptTime>2002-01-02T18:01:00</ReceiptTime>
        <ProcessStatus>1</ProcessStatus>
        <Comment>No Comment</Comment>
        <TransactionData>:20:MT940-1007200601
    :25:3210000079901
    :28C:190/0001
    </TransactionData>
        <CompanyCode>PARTNER01</CompanyCode>
    </PaymentInfoResponse>
    <StatusCode>OK</StatusCode>
    <StatusDetail>OK</StatusDetail>
    <ResponseItemCount>2</ResponseItemCount>
    </PaymentInfoMessageResponse>
    ESR Configuration
    Please see the below screenshot for ESR config. I have created 4 data types, 4 message types, 2 Service interface (synchronous), 2 mapping and one operation mapping.
    I just want to clarify about selecting the Request and response message type in inbound and outbound service interface.
    <?xml version='1.0' ?>
    <PaymentInfoMessage>
    <PaymentInfoRequest>
    <CompanyCode>Partner01</CompanyCode>
    <BankCode>BSFRSARI</BankCode>
    <StartDate>2006-07-09T00:00:00</StartDate>
    <EndDate>2006-07-09T00:00:00</EndDate>
    <TransactionType>940</TransactionType>
    </PaymentInfoRequest>
    </PaymentInfoMessage>
    Response Structure (Bank->PI->ECC)
    <?xml version="1.0"?>
    <PaymentInfoMessageResponse>
    <PaymentInfoResponse>
        <TransactionType>940</TransactionType>
        <SequenceNum>1</SequenceNum>
        <ReceiptTime>2002-01-02T18:01:00</ReceiptTime>
        <ProcessStatus>1</ProcessStatus>
        <Comment>No Comment</Comment>
        <TransactionData>:20:MT940-1007200601
    :25:3210000079901
    :28C:190/0001
    </TransactionData>
        <CompanyCode>PARTNER01</CompanyCode>
    </PaymentInfoResponse>
    <StatusCode>OK</StatusCode>
    <StatusDetail>OK</StatusDetail>
    <ResponseItemCount>2</ResponseItemCount>
    </PaymentInfoMessageResponse>
    ESR Configuration
    I have simply created 2 data types for requests(ECC->PI->Bank) and did one to one mapping. Similarly for response(Bank->PI->ECC) 2 data types, one to one mapping for this as well.
    But I just want to clarify about selecting the Request and response message type in inbound and outbound service interface. please explain me this for synchronous interface.
    Please see the below structure from ESR and inbound and Outbound service and let me know if the selection of Request and response message types is correct or not.
    OutBound service interface
    Inbound service interface
    Thanks,
    Farhan

  • Error CLIENT_RECEIVE_FAILED  Error while receiving by HTTP

    Hi,
    I am working on a XML to flat file scenario where I am using MULTI Mapping to get multiple outputfiles.but in SXMb_MONI I am getting this below  error. and mesages are stuck in SMQ2.
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
      <SAP:P1>110</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error while receiving by HTTP (error code: 110, error text: )</SAP:Stack>
      <SAP:Retry>A</SAP:Retry>
      </SAP:Error>
    what might be the cause for the error and do i need to enable any TUNING parameteres in IE specific config ?
    I have gone through different que blogs,but cant find the right one.
    thank you,
    babu

    Babu,
             the error has occured in the last pipeline step - Call adapter... Looks like the message size is too large (happens sometimes with multimapping)...Try increasing the max request size parameter.
    Please go through Micheal's Post - >
    Re: Error-Code: 108 - CLIENT_RECEIVE_FAILED
    Also go through the tuning guide...
    regards,
    Arvind R

  • File-Proxy (Error while receiving by HTTP )

    Hi All,
    I have a problem in the scenario file to Proxy....which is that after placing a source file successfuly in the source directory.... it is showing an information message in the XML message monitoring(sxmb_moni) like below
    Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED)
    Could anybody  explain the problem please????where i need to configure to reslove this.
    Thanks.
    Respond me Imme pls.

    First thing to check is that the adapter_plain service is activated in the transaction SICF. (path: default_host-> sap -> xi -> adapter_plain
    Then check that the http service is running properly (transaction SMICM).
    Also, unless you are connecting to an SAP webAS, you should give a username and password, rather than "Use Logon data fotr SAP System". You could also maintain the URL and authentication data as an sm59 destination and use that in the adapter.
    Please look at these...
    INTEGRATION_DIRECTORY_HMI: Connection fails
    ICM_HTTP_CONNECTION_FAILED
    SAF - ICM_HTTP_CONNECTION_FAILED
    HTTP adapter setup
    Check out this SAP Note- 824554
    Also this links
    ICM_HTTP_CONNECTION_FAILED
    Cache Refresh~
    https://websmp201.sap-ag.de/~sapdownload/011000358700003163902004E/HowTo_handle_XI_30_Caches.pdf
    ICM_HTTP_CONNECTION_FAILED ERROR
    error code: 400, error text: ICM_HTTP_CONNECTION_FAILED
    Error With ABAP Client proxy
    Message not reaching Integration server
    HTTP content sever - error?
    Error in content server configuration
    HTTP Client : Code 110 reason
    RFC: INTEGRATION_DIRECTORY_HMI
    Content server config - error?
    Thanks
    Swarup

  • SQL Service Broker 2012: the connection was closed by the remote end, or an error occurred while receiving data: '64(The specified network name is no longer available.)'

    Anyone can help with the below issue please? Much appreciated.
    We have about 2k+ messages in sys.transmission_queue
    Telnet to the ports 4022 is working fine.
    Network connectivity has been ruled out.
    The firewalls are OFF.
    We also explicitly provided the permissions to the service account on Server A and Server B to the Service broker end points.
    GRANT
    CONNECT ON
    ENDPOINT <broker> <domain\serviceaccount>
    Currently for troubleshooting purposes, the DR node is also out of the Availability Group, which means that we right now have only one replica the server is now a traditional cluster.
    Important thing to note is when a SQL Server service is restarted, all the messages in the sys.transmission queue is cleared immediately. After about 30-40 minutes, the errors are continued to be seen with the below
    The
    connection was
    closed by the
    remote end,
    or an
    error occurred while
    receiving data:
    '64(The specified network name is no longer available.)'

    We were able to narrow down the issue to an irrelevant IP coming into play during the data transfer. We tried ssbdiagnose runtime and found this error:
    Microsoft Windows [Version 6.1.7601]
    Copyright (c) 2009 Microsoft Corporation.  All rights reserved.
    C:\Windows\system32>SSBDIAGNOSE -E RUNTIME -ID 54F03D35-1A94-48D2-8144-5A9D24B24520 Connect to -S <SourceServer> -d <SourceDB> Connect To -S <DestinationServer> -d <DestinationDB>
    Microsoft SQL Server 11.0.2100.60
    Service Broker Diagnostic Utility
    An internal exception occurred: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    P  29830                                 Could not find the connection to the SQL Server that
    corresponds to the routing address tcp://XX.XXX.XXX.199:4022. Ensure the tool is connected to this server to allow investigation of runtime events
    The IP that corresponds to routing address is no where configured within the SSB. We are yet unsure why this IP is being referred despite not being configured anywhere. We identified that this IP belongs to one of nodes other SQL Server cluster, which has
    no direct relation to the source server. We failed over that irrelevant SQL Server cluster and made another node active and to our surprise, the data from sys.transmission_queue started flowing. Even today we are able to reproduce the issue, if we bring
    back this node [XX.XXX.XXX.199] as active. Since, its a high business activity period, we are not investigating further until we get an approved downtime to find the root cause of it.
    When we get a approved downtime, we will bring the node [XX.XXX.XXX.199] as active and we will be running Network Monitor, Process Monitor and the SSB Diagnose all in parallel to capture the process/program that is accessing the irrelevant IP.
    Once, we are able to nail down the root cause, I will share more information.

  • HT3275 I keep getting the "Unable to complete backup. An error occurred while copying files to backup volume.  The solution on the website is try try again.  Its been trying for 5 days now.  Now what?  Obviously something else needs to be done.

    I'm using an airport extreme and I keep getting the "Unable to complete backup. An error occurred while copying files to backup volume.  The solution on the website is try try again.  Its been trying for 5 days now.  Now what?  Obviously something else needs to be done.

    Verify the backup.
    Is this TM you are using? TM to airport extreme connected hard disk are known to be fragile at best.
    A5 http://pondini.org/TM/Troubleshooting.html
    make sure the disk is available and online..
    But if it is not working.. then you will have to wipe and start again.
    http://pondini.org/TM/Airport.html
    If this is not TM then also verify the source disk.

  • When I open itunes to play content I've already purchased and while attempting to view trailers for movies in the itunes store, I receive a generic error message from windows, and I'm directed to reinstall the latest version of itunes.  Not a fix.  Help?

    When I open itunes to play content I've already purchased and while attempting to view trailers for movies in the itunes store, I receive a generic error message from windows, and I'm directed to reinstall the latest version of itunes.  Not a fix.  Help?

    after perusing other subjects with playback issues: 
    this is the fix: 
    -Launch Control Panel - Double click Quicktime, If you do not see quicktime, look on the top left side of control panel and switch to classic view. This will then allow you to see Quicktime.
    -Now click the advanced tab and click on Safe Mode GDI Only, Apply, then ok.

  • Best I have been trying for a week to order greeting cards using iPhoto but do I always get the same statement: there has been an error occurred while connecting to Apple's online store try again

    Best I have been trying for a week to order greeting cards using iPhoto but do I always get the same statement:
    there has been an error occurred while connecting to Apple's online store try again

    Best I have been trying for a week to order greeting cards using iPhoto but do I always get the same statement:
    there has been an error occurred while connecting to Apple's online store try again

  • Keep getting this error message on my calendar "HTTP error 404. Make sure the URL is correct.". Any idea how to fix it?

    Keep getting this error message on my calendar "HTTP error 404. Make sure the URL is correct.". Any idea how to fix it?

    I started getting this at the same time. Must be something on their end. It's all still working though which is weird.

  • An error occurred while executing batch. Error message is: There is not enough space on the disk.

    Hello all,
    I execute a T-SQL query, which will retrieve large amount of data, however, I get an error message after a few seconde.
    The error message is :
    An error occurred while executing batch. Error message is: There is not enough space on the disk.
    Who can tell me the reason and waht's the steps to solve this issue ?
    Really thanks.
    Thanks, Jed deng

    The other two posters suggested that the problem with tempdb or you data/log files. This is not the case here. The error message relates to the client-side of things. Apparently SSMS needs to store data on disk. I don't recall exactly when this happens,
    but I seem to recall that the files appear in you %TEMP% directory.
    I would suggest that your correct action is to clean up the disk. Not the least there may be a lot of junk in your %TEMP% and %TMP% directories.
    Erland Sommarskog, SQL Server MVP, [email protected]
    Thanks Erland, I was not aware of this earlier. Now, I am able to find out one of the resons for slowness of SSMS gird. Also, I have just checked it with process monitor, SSMS is creating tmp%.tmp files..
    - Chintak (My Blog)

  • Unable to get the file system information for: \\****servername\E$\; error = 64 Unable to distribute content to DP

    One of our DPs has stopped loading content. 
    I've research for quite a bit and cannot find a clear cut reason to this.  This server only has a DP role, I verified sharing permissions, all looked good. This DP has been running just fine for the last year or so and all sudden it will no longer load
    packages.  The disk drive is still present I can still reach the hidden share \\servername.com\E$
    Verified that the SMSSIG$ folder is there and the last entry is from 4/23/2015 
    SCCM 2012 R2 
    OS 2008 R2 Standard
    Any help is greatly appreciated!
    Here's a snipit from the distmgr.log
    Start updating the package on server ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\...
    Attempting to add or update a package on a distribution point.
    Will wait for 1 threads to end.
    Thread Handle = 0000000000001E48
    STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=***.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:01.972 2015 ISTR0="SYSMGMT Source" ISTR1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
    ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
    SMS_DISTRIBUTION_MANAGER 4/30/2015 2:12:01 PM
    8252 (0x203C)
    The current user context will be used for connecting to ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\.
    Successfully made a network connection to \\*****.com\ADMIN$.
    Ignoring drive \\*****.com\C$\.  File \\*****.com\C$\NO_SMS_ON_DRIVE.SMS exists.
    Unable to get the file system information for: \\*****.com\E$\; error = 64.
    Failed to find a valid drive on the distribution point ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\
    Cannot find or create the signature share.
    STATMSG: ID=2324 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=sccmprdpr1sec2.mmm.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:55.206 2015 ISTR0="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
    ISTR1="CAS00087" ISTR2="" ISTR3="30" ISTR4="94" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
    Error occurred. Performing error cleanup prior to returning.
    Cancelling network connection to \\*****.com\ADMIN$.

    Error 64 is being returned which is simply "the network name is no longer available".
    There can be a number of reasons for this from SMB compatibility issues (2003 servers wont support SMB2), to the expected and actual computer name of the boxes don't match (tries to authenticate with server.tld.com when the actual name is srv-01.tld.com and
    you just put a C-name in). I'd start from the top:  Try opening said share from the Primary Site server as that's the box doing the work.  Verify the IP and computer name is legit and that no one has played ACL games between the two systems (remember
    RPC only initiates/listens on port 135 but established connections are up in the dynamic port range).
    At the end of the day it's an issues "underneath" SCCM, and not an SCCM problem specifically. 

  • I am getting the PowerPC applications are no longer supported error, so I downloaded Libreoffice and can not find it on my hard drive anywhere. It did say install to Applications but it's not there. How do I find it and can I put it in my dock?

    I am getting the PowerPC applications are no longer supported error, so I downloaded Libreoffice and can not find it on my hard drive anywhere. It did say it would install to Applications, but it's not there. How do I find it and can I put it in my dock?

    In Safari's preferences:
    Look in the folder displayed where you see the arrow. The actual Downloads folder is found in your Home (user) folder.

Maybe you are looking for

  • PhotoShop Elements 9 Edit will not open.

    After opening 2 or 3 images in Elements 9 edit a dialog box will come up and say "Elements is already running but is not responding close the Elements process or restart your system". I do not see where I can close the running Elements process. I hav

  • Working with different versions of FCP

    My apologies if this is answered somewhere else but is there any way to work on a newer version of FCP then take that project to an older version? We have 5.1 at home but the workplace has 5.0. I'd like to do some work at home and am not sure how tak

  • Orange livebox connection problem

    has anyone managed to connect their i-phone to their orange livebox? Orange tech support in India is hopeless...and Apple support in the UK is equally useless. I cant believe that these two massive players in the global communications industry cannot

  • Is it possible to have two at selection-screen events in a program

    Hi all,      I have a selection screen wherein i am using i have 5 radiobuttons and 3 select-options and a parameter. I am trying to use two at selection-screen events 1) at selection-screen on radiobutton group rad1. 2) AT SELECTION-SCREEN ON VALUE-

  • Can you guys fix my home button ? Its stuck , how much do I have to payy?

    Its it possible for you guys to fix the home botton of my ipod touch? . And if its possible how much will it cost.