Getting the error in PGI

Hi gurus,
I am getting the error while doing the post goods issue in delivery,
This is error details please go through it,
Short text
Field symbol has not yet been assigned.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSLVC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Can anybody tell me what might be the reason.
Regards,
pavan.

Dear Pavan,
This may due to ABAP Application Program
So You better to take help of ABAP people to fix the issue.
or
You can post the same in the ABAP forum you can get better replies.
I hope this will help you,
Regards,
Murali.

Similar Messages

  • I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened.  Please repair or reinstall QuickTime".  I did that and it did not help.  Any ideas?

    I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened.  Please repair or reinstall QuickTime".  I did that and it did not help.  Any ideas?

    Let's see if a more rigorous uninstall/reinstall procedure gets us past that, nancy. See the following troubleshooting document:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • In iCal - I keep getting the error message " This calendar was created by Mail" and it will not accept any input; why..??

    In iCal - I keep getting the error message “ This calendar was created by Mail” and it will not accept any input; why..??

    use Disk Utility and Verify Permisions then fix and Verify Disk and fix, this should fix it.

  • My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any

    My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any advice is helpful. This has never happened in 6 years

    answered in your other thread LR 4 suddenly no longer recognizes files.

  • I purchased Elements 13.  When I tried to install I get the error message that it is not supported by Vista.  Now what do I do?

    I purchased Elements 13.  When I tried to install it I get the error message that it is not supported by Vista.  What do I do now?

    If you can't install Windows 7 or higher or get a new computer with Windows 7 or higher, you won't be able to run Photoshop Elements 13.
    There are many inexpensive refurbished or "off lease" computers available at very reasonable cost.  Here is one example (scroll down):
    Computers & Tablets, Desktop PCs, All Desktop PCs, Refurbished - Newegg.com

  • HT4623 When I plug my ipad to itunes i get the error message that it is not supported and I have to go to itunes and get itunes re-installed?  i never had this problem before.  if i do this will i loose all my files, music, etc?

    When I plug me ipad to itunes i get the error message that it is not supported and that i have to go to itunes and get "itunes installer" and re-install.  if i do this will i loose my files and music?

    No, you should not lose anything.

  • I have just bought an iPhone 5 and it won't sync to iTunes.  It says it needs  iTunes 10.7, which I have downloaded and installed.  I still get the error message and looking at "about iTunes" it says 10.6.3.  What do I do??

    I have just bought an iPhone 5 and it won't sync to iTunes.  It says it needs  iTunes 10.7, which I have downloaded and installed.  I still get the error message and looking at "about iTunes" it says 10.6.3.  What do I do??

    Perhaps check to see if you're accidentally running two different versions of iTunes. There's some information on troubleshooting that in the Opening iTunes section of the following document:
    Troubleshooting iTunes installation on Mac OS X

  • When I publish my site on one specific page where i've added {tag_pagecontent} I get the error:Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.

    When I publish my site on one specific page where I've added {tag_pagecontent} I get the error:
    'Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.'
    I'm trying to get a blog module going, I've even deleted the html insert bog with the tag in and re-published which then I don't get the error but as a result no blog either. But then I add the tag in again and publish the error comes back. I've used the dev console and it says that my musicians sample.css is out of date but why is it only out of date when I add in html to my muse site?
    HELP!!!! I've searched other threads and to no avail I'm publishing so no direct ftp going on. the only thing I changed in business catalyst was the module stylesheet in order to style the blog. I've tried uploading and replacing all files nothing seems to work. the site is here:
    http://www.musicstudentsforhire.co.uk/musicians-samples.html
    It's only this page as it has the blog on. Also I've noticed when I've re-published occasionally it will show the mobile version on my desktop and not the desktop version??? no idea why that's happening so I've had to turn that off. any explanation on why that is happening would also be much appreciated.

    I haven't received an answer as of yet, I'll post t on here when I do. I de-activated the mobile site because it's my clients site so he needs it to be operational during the day. I hope someone gives me an answer soon.

  • Problem with Home Sharing.  Getting the error "The Requested URL was not Found on this Server"

    I recently purchased an iPhone 5.  As I do with all of my AppleTVs, iPads, iPods and an iPhone 4 in my home, I connected the 5 to my home network and accessed the shared video library using home sharing.  My iTunes library is roughly 85% iTunes purchases, a handful of videos taken with iOS devices, and some video ripped with Handbrake.  All of these videos work fine on all devices in my home except my new iPhone 5.  When I access the shared video library on my iPhone 5, all of the textual data for all of the videos appears, however, I can only get the iPhone to play 1 video of the dozens in my iTunes library. When I try to play any other, I get the error, "The Requested URL was not Found on this Server."
    Interestingly, only one video in my entire shared library displays the artwork associated with it in my iTunes library on my iPhone 5, and that's the one I can stream without a problem. Even more interestingly, that video I am able to stream was ripped using Handbrake (there are a number in my library ripped using Handbrake, but just this one will stream to my iPhone 5 for some reason).
    I'm using the latest version of iTunes (10.7) on my home (iMac) computer (running OSX 10.8.2- Mountain Lion)and of course iOS 6 on the iPhone 5. I've tried resetting my iPhone several times as well as restarting my iMac which holds my iTunes library.
    Does anyone have any ideas as to what's going on?

    Can you see if you can view index page from a browser on iPhone.
    Have you seen live streams working from a different computer...
    if not then check if a proper crossdomain.xml file in its place(webroot folder).

  • How can i get the error message from the thrown/raised exception?

    DB version:10gR2
    Examples for this thread taken from
    Want Stored Procs to get exectuted regardless of preceeding SPs Success or
    I have a package with several functions and procedures inside.I created a caller procedure called callProcs, which will execute various procedures within the package in the appropriate order.
    In the below example i cannot get the error message thrown from line 20
    create or replace package body mypackage
    is
    variable_proc1 number;
    variable_proc2 number;
    variable_proc3 number;
    v_result       number;
    my_exception   exception;
    procedure proc1
    is
    begin
    select 8/0 into variable_proc1 from dual;
    exception
              when others
              then raise my_exception; ----line 20
    end;
    procedure proc2
    is
    begin
    select 1 into variable_proc2 from dual;
    exception
              when others
              then
                   null;
    end;
    procedure proc3
    is
    begin
    select 3 into variable_proc3 from dual;
    exception
              when others
              then
                   null;
    end;
    Procedure caller_proc
    is
    begin
    proc1;
    proc2;
    proc3;
    v_result:=variable_proc2+variable_proc3;
    dbms_output.put_line('The output is '||v_result);
    exception
              when my_exception
              then
    dbms_output.put_line('Heyyyyy the error is '||SQLERRM); -- exception caught at line 64 of caller proc
    end;
    end mypackage;
    When i try executing the caller proc, i don't get the error. Instead i get the text User-Defined Exception as shown below
    set serveroutput on
    exec mypackage.caller_proc;
    Heyyyyy the error is User-Defined Exception
    PL/SQL procedure successfully completed.Edited by: user10633418 on Mar 10, 2009 11:30 PM

    Thank you justin.
    Sorry my earlier post was a bit ambiguous.
    I wanted the error generated at proc1 to be captured at caller proc's Exception handling section (line 64) so that i could log the error to an ERR_LOG table.
    I can actually log this error at proc1 itself like
    exception
    when others
    THEN
    error_message :='My custom message for the particular proc '||SQLERRM;
    dbms_output.put_line(error_message);
    logerror(error_message); --an autonomous error logging proc
    raise;But there is a RAISE statement in proc1's exception handling, so the exception gets propogated to caller proc's exception handling section {color:#ff0000}*and another redundant row will be created at ERR_LOG table for the same error because there is a*{color}
    logerror(error_message);--an autonomous error logging proc
    in the WHEN OTHERS section of exception handling section of the caller proc
    I want to avoid the creation of this redundant row in ERR_LOG table.

  • I'm trying to update my iphone 3GS to the 4.3.4 version and I am getting the error message "This version of itunes (version 9.1.1) is the current version.  How do I update my PHONE and why is an itunes update being confused for my iphone?

    I'm trying to update my iphone 3GS to the 4.3.4 version and I am getting the error message "This version of itunes (version 9.1.1) is the current version.  How do I update my PHONE and why is an itunes update being confused for my iphone?

    You need iTunes 10.0 or greater to update your phone...iTunes isn't confused at all. If you're on a Mac, you'll need OS X 10.5.8 or greater to update iTunes to 10.0 or greater.

  • When I attempt to connect to iCloud I get the error message: Apple id's email address cannot be verified.  There is nothing wrong with my apple id and I do not want to change it.Any suggestions?

    When I attempt to connect to iCloud I get the error message: Apple id's email address cannot be verified.  There is nothing wrong with my apple id and I do not want to change it.Any suggestions?

    Debi....
    Try "resetting" your Apple ID password >  Apple - My Apple

  • Why do I get the error message "unable to load page (HTTP 502) when I try to open Mobile Web?

    I have an LG Octane 3 basic phone.   Does everything I need, phone and text, and I never was interested in web or e-mail capabilities until I recently upgraded our plan to the "More Everything" and was able to use data and check e-mail and access the internet.   Whenever I try to open Mobile Web, I get the error message "unable to load page (HTTP 502)".    As of March 31, 2015, all of us basic phone users lose the "Mobile Email" app on our phones, and will have to access web versions of our e-mail via the web.  Which is currently unavailable and doesn't work.
    Over a week ago, did a chat session with a tech support rep, and she indicated that either she or an engineer would contact me with how to fix the problem.   Have not heard anything from anybody, and the deadline is approaching quickly.   Have no need of all the excess features of a smart phone, nor do I wish to be forced to jettison a perfectly working phone for my needs and buy something I don't want to be able to do 2 simple things.............check e-mail to see if there's something that needs to be answered right away, and to check traffic reports when I'm on the road, or find something in an area with which I'm not familiar.     Not really too much to ask, you would think....   )
    Has anyone else had this same problem, and if so, how do we fix it....???  My next move is a phone call, but those haven't always been very productive.
    If any of you have any ideas why this error keeps coming up and the web can't load, and some on how to fix it, I would really appreciate some advice.
    Thanks in advance.
    Karen

    Since the chat session got no reply, I contacted Verizon by phone and a very nice level 2 tech created a trouble ticket and sent it up the food chain.  Got a call back, maybe 2 days later, and had a nice, although very long session with a higher level tech.  They had determined that the browser for the LG Octane is an old one and no longer supported by Verizon.    We tried everything we could to download the Opera browser, but since I was totally unable to get Mobile Web to work, couldn't do it.   The only other possible "fix" was to totally reset the phone to factory specs and try it again.   That would mean a lot of work on my part to move anything I didn't want to disappear off the phone, and find a place to forward texts that had to be saved.   Caught our tenants lying about why the rent was late (again), and need that for when I put them back on a lease....  
    Long story short is that unless we try this total reset, which isn't a sure fix, either, anyone who isn't able to access the Mobile Web with the LG Octane will have to change their plan to avoid paying for data that you can't access using any method. 
    I ran a test with an app that I knew was no longer valid.....that was sending photos to PixPlace.   Got the exact same error message as when trying to access Mobile Web to get the web version of my e-mail.   That just verified that the 502 error is, at least in the LG Octane, for an app that no longer works.   After today, we'll get the same thing when we try to access Mobile E-Mail.
    Have to admit, it's a real ****-off, but this shouldn't surprise me, since Verizon won't repair older copper phone lines if you are in an area where FIOS is offered. 
    I am going to immediately change my husband's and my cell phone plan to one without data, and see what I can find that will still give unlimited calls and text.  The way my luck runs, they won't offer one for a decent price.  The other half has some very long-winded friends and he was always running over minutes, and some months are very text-heavy and I'd go over my limit.   Absolutely HATE touch screens, and am not looking forward to having to get a new phone.  

  • I cannot connect to I tunes store using I tune 11.1 I get the error 0x80092013 "secure link to I tunes store failed" does anyone know what this is?

    I cannot connect to the I tunes store after recently downloading I tunes 11.1 I just get the error code 0x80092013 so not sure what to do. I have tried deleting and then reinstalling I tunes with no luck. I tried to flush my DNS but that did not work, I tried the diagnostics in I tunes and it told me my connections were fine but said the "secure link to I tunes store failed" Looking for an answer thanks!

    Okay I was able to connect back to the I tunes store in I tunes 11.1 taking care of the error 0x80092013. I did this in XP going to the firewall controls, selecting the exception tab. I tunes was already in the exceptions tab but I deleted it anyway, then I added I tunes back using the Add Program button then browsing to the I tunes.exe location in the C drive then selected that as the program. I tunes showed back up in the exceptions once again. I then shut down the computer and restarted it and I then had a connection with I tunes. So the I tunes in the exceptions tab in the firewall was not working I just replaced it with a fresh one.

  • Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....

    Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....I hit retry and it came up again. I hit ignore and it prompted me to hit finish so Itunes can open.   I looked thru alot of these posts on here to try and resolve this problem myself but it's not working too well...I downloaded Itunes to my desktop so I can right click it with the program i downloaded called WinRAR. I extracted it and then went into the folder called Itunes64setup. I saw the file called AppleMobileDeviceSupport64 in there so I began to try and download it on it's own. Well that didn't work as I planned and got this error message:
    Apple Mobile Device Support wasn't installed on your computer. The installer encountered errors before Apple Mobile Device Support could be configured. Your system has not been modified. To retry these operations at a later time,please run the installer again.
    Well I tried to run it again and came up with the same message...I see that some people got great support to help them so I am hoping someone can help me as well. I know "b nor" is very qualfied and hopefully can help me! Please advise what I can do. Thank you

    Hi Iss9243,
    Welcome to the Support Communities!
    You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue.  Hope it helps ....
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Judy

Maybe you are looking for