Getting the "latest" compressor for FCS1

What is the latest version of Compressor that can be used with FCS1? My FCS comes with compressor 2.0; I can install 2.0.1; the qmaster-died-no-background-process error persists.
Is Compressor 2.1 available, and if so what software update provides that? And what about that Apple page saying nothing <v2.3 works with Leopard?
I am going to try overwriting my installation with Pacifist but suspect I will (again - or is 3rd time?) wipe the disk and re-reinstall Leopard and FCS and try yet again.
That, or go to Tiger for the next 6 months.
Thanks for any suggestions.
Brian

According to the Compressor Support page, the highest version for Compressor 2.0 is 2.0.1.
When Apple started transitioning to Intel, they introduced a Crossgrade program which was a paid upgrade to Final Cut Studio 1.1 (FCP 5.1, Compressor 2.1, etc.). The Crossgrade program was extended a few times and lasted about 15-18 months. It was discontinued about a year ago, shortly before the release of Final Cut Studio 2.

Similar Messages

What is the latest update available for Mac OSX 10.5.8 that will allow me to get the latest update for iTunes. I really need to update my iPhone and CAN'T!! GRRRR!!!

What is the latest update available for Mac OSX 10.5.8 that will allow me to get the latest update for iTunes. I really need to update my iPhone and CAN'T!! GRRRR!!!

Minimally you need Snow Leopard or greater:
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion — System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

How can I get the latest firmware for a WRT54GS 7.2? I ac...

How can I get the latest firmware for a WRT54GS 7.2? I accidentally downgraded to 7.2.05, and it came with 7.2.06.

Thank you! I tried that link, it came as a page not found on the Linksys site. I went to the UK version of the Linksys site, and they don't list the 7.2 version of the router. They only go up to 6.0.

How to get the latest update for the phone?

hey does anyone know how to get the latest upgrade for my phone? 3230 nokia

http://www.nokia.co.uk/nokia/0,,58162,00.html
Gadget
Remember to mark all correctly answered questions as Solved. A forum is only as great as the sum of its parts, together we will prevail.

Getting the latest area for each case

dear all;
I have a table with the following info below
create table tmp_a
       idv number(30),
       personid number(30),
       Area varchar2(200),
       dateadded date,
       is_close number(2)
insert into tmp_a
(idv, personid, area, dateadded, is_close)
values
(1, 10001, 'ZONE_A', sysdate, 1);
insert into tmp_a
(idv, personid, area, dateadded, is_close)
values
(2, 10002, 'ZONE_B', sysdate, 0);
insert into tmp_a
(idv, personid, area, dateadded, is_close)
values
(3, 10003, 'ZONE_A', sysdate, 0);
insert into tmp_a
(idv, personid, area, dateadded, is_close)
values
(4, 10003, 'ZONE_A', sysdate, 0);
Now I would like to get this below
idv   Personid   Area        Dateadded                           Is_clode
4       10003   Zone_A     3/3/2011 1:00:37PM               0
2       10002   Zone_B     3/3/2011 12:17;14PM              0the output is based on the fact, if there are duplicates associated with the area, the query should pick the latest one...In this case, the latest one for zone_A is idv 4.
kindly note, idv is a primary key. How do I go about doing that? All help is appreciated. Thank you.

Hi,
ROW_NUMBER returns a unique number for every row. If you have n rows, it will return the integers 1 through n, without skipping or duplicating any numbers, so you can be confident it will return the number 1 on exactly 1 row.
ROW_NUMBER (PARTITION BY area ...) means that a separate set of integers, each starting with 1, will be returned for each distinct value of area.
ROW_NUMBER (PARTITION BY area ORDER BY idv DESC) means that the numbers will be assigned in DESCending order by idv. The row with the highest idv for each area will be the row for which ROW_NUMBER returns 1.
The LAST function, as demonstrated by Solomon, is a good thing to have in your toolbox, but you have to code a somewhat complicated expression for each column (except the GROUP BY column, and the column that determines the order). When you need to pick an entire row, I find it easier to use ROW_NUMBER.
Also, ROW_NUMBER can easily be adapted if your needs change. Where I work, people are always saying things like "Remember that query you wrote for me, that returns the latest row fro each area? Can you make it return the latest 5 rows?" or "It truns out idv isn't unique. Can you make it return all the rows with the highest idv?" It's easy to change the ROW_NUMBER solution to do things like that.

How to get the latest firmware for BT Home Hub-3 &...

I have had this new BT Home Hub3 activated last night.
To get connected wireless to my Mac Book Air and iPod Touch, I had to refresh the Wireless Channel in my BT Home Hub settings. The Hub has selected the Channel 11 automatically that works well for my home wireless connection.
This morning, my Home Hub has reverted back to Channel 6 and my wireless would not work. I had to go back to the settings in the Home Hub-3 to "Refresh" to select the best Channel and it has chosen Channel 11 again and all works well.
My question is how could I get the Home Hub-3 to remember the selected channel without me in the morning to refresh the setting on a daily basis?[I have tried by selecting the "Apply" and a green circle with a tick to denote that the change had taken place]
Home Hub-3 current firmware Version 4.7.5.1.83.8.45 [Type A] and I noticed a new one available and How could I update mine to the latest?
Regards
Solved!
Go to Solution.

if you select advance settings and go back to the wireless page, you will be able to see channel selection, likely to be on Automatic (smart wireless); here you can manually select channel 11 and it will stay there.
Check your exchange or major service outagesIf someone has given a helpful answer, please click on their Ratings star on the left-hand side. ***

How do i get the latest IOS for ipod touch? where do i go? is it free? ._.

Ok, so i want this app but everytime i want to download it, it says i dont have the right ios version blah blah... so how can i upgrade my ipod touch to this version like do i download it? or... ._. i feel reaaaall dum but seriously, i just want this freaking app! so how do i get this ios (latest one) Pls helpppppp D: Dad wont help!

If you have the iPod Touch 4th generation then i'm sorry to say that your out of luck. It can only be downloaded on iPod Touch 5th gen. If you have the 5th gen iPod Touch then you go to settings > general > (second one from the top) Software update. and click instal for the one that says iOS 7!

How do I get the latest drivers for windows 7 boot camp install?

I have a 24" mac early 2009. I had windows xp installed on a partition using an early edition of boot camp. I had to reformat my mac and so I purchased windows 7 home premium oem edition. When I try to install and copy boot camp drives to a 32 gb usb drive I get a message that Apple does not have drivers for that.

find your machine and OS here, manually dl the pkg
http://support.apple.com/kb/ht5634

Where can I get the latest patch for Forms 6.0?(Urgent)

Please refer to my prevoius Question
"Text Items and their Prompts......"

metalink.oracle.com
Regards
Grant Ronald
Forms Product Management

Getting the latest dates

Hello,
I have simple question ....i dont know why i m brain dead today...
I m trying to get the latest date for the each id
with test_data as(
select '001'id, 'xyz'name, '1/1/2009'start_date from dual union all
select '001', 'abc', '1/2/2099' from dual union all
select '001', 'def', '1/3/2009' from dual union all
select '001', 'ghi', '1/4/2009' from dual union all
select '001', 'jkl', '1/5/2009' from dual
The output i m looking for just one record with latest date
with result as
     select '001', 'jkl', '1/5/2009' from dual
i tried this
select id,name, greatest(start_date) from test_data
group by id,name,start_date
It gives me output ...which i m not lookg for
with t as
     select '001', 'abc', '1/3/2009' from dual union all
     select '001', 'ghi', '1/4/2009' from dual union all
     select '001', 'jkl', '1/5/2009' from dual
   )select * from t
   I was wondering if we have any function's in oracle PL/SQL to do these kind of stuff's
Any suggestions is greatly appriciated!! Thank you sio much!!
Edited by: user642297 on Mar 12, 2010 12:21 PM

SQL> with test_data as(
2 select '001'id, 'xyz'name, '1/1/2009'start_date from dual union all
3 select '001', 'abc', '1/2/2099' from dual union all
4 select '001', 'def', '1/3/2009' from dual union all
5 select '001', 'ghi', '1/4/2009' from dual union all
6 select '001', 'jkl', '1/5/2009' from dual union all
7 select '002', 'ghi', '1/4/2009' from dual
8 )
9 select id, max(start_date), max(name) keep (dense_rank first order by start_date desc)
10 from test_data
11 group by id;
ID MAX(STAR MAX
001 1/5/2009 jkl
002 1/4/2009 ghiMax
http://oracleitalia.wordpress.com

Where is the latest javadoc for Workflow Services API?

Hi all,
anybody knows where to get the latest javadoc for Oracle BPEL Process Manager
Workflow Services API Reference 10g Release 3 (10.1.3) ?
In the javadoc it is said that IWorklistService.getWorklistTaskDetails(..) returns IWorklistTask but apparently it returns a Task object.
Also, I saw some of the interfaces and classes are deprecated and replaced by classes in oracle.bpel.services.workflow package, where is the jar containing this new package?
Thanks a lot for the help,
santoso

Thanks for posing the question as to where is the javadoc for 10.1.3.1. Now, what is the answer?
Bob N

Where can I get the latest Microsoft.SharePoint.ApplicationPages.dll for SharePoint 2010?

Can somebody point me to where I can get the latest Microsoft.SharePoint.ApplicationPages.dll for SharePoint 2010?
When I go into Library Settings on any library or list in SharePoint 2010 I’m getting an unexpected error; I see this in the SharePoint log:
11/18/2014 13:12:26.36 w3wp.exe (0x2260)                       0x33EC SharePoint Foundation
        Runtime
tkau       Unexpected       System.NullReferenceException: Object reference not set to an instance of an object.    at Microsoft.SharePoint.ApplicationPages.ListEditPage.SetSectionLinks()
at Microsoft.SharePoint.ApplicationPages.ListEditPage.OnLoad(EventArgs e)     at ASP._layouts_listedit_aspx.OnLoad(EventArgs e)     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 03c7c5b4-407f-461c-9cf7-0304eb797b1a
I searched online and found this:
https://social.technet.microsoft.com/Forums/sharepoint/en-US/ed5aa58a-f5cc-4449-8bfd-65ca6f101641/list-settings-page-error-on-all-type-of-sharepoint-2010-listslibraries?forum=sharepointgeneralprevious. It says:
We noticed exactly the same issue after applying some SharePoint updates (SP1 + October 2011 CU). The problem turned out to be that there was an older version (V14.0.4762.1000) of Microsoft.SharePoint.ApplicationPages.dll in the GAC.
This version was being loaded instead of the latest version of the DLL (14.0.6112.5000).
Loading the latest version of Microsoft.SharePoint.ApplicationPages.dll fixed the problem with the List/Library settings page.
I check our Microsoft.SharePoint.ApplicationPages.dll and found that we have version 14.0.6024.1000.
I would like to try replacing it with the latest version to see if that could fix the problem going into library settings.
Does someone know where I can get the latest Microsoft.SharePoint.ApplicationPages.dll for SharePoint 2010?
David

You would need to extract it from an update. Pre-SP2 SharePoint 2010 is no longer supported, I'd recommend upgrading to SP2 which should take care of any versioning issues.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

I have just installed the latest software for iphone4 - I have retained all data except my Contacts have disappeared - how can I get back ?

I have just installed the latest software for the iphone4 - I have retained all the data EXCEPT the Contacts have all disappeared - can I get back ?

Maybe on outlook application if you use it with pc. If not try to restore your iPhone with a old backup from iTunes.
http://support.apple.com/kb/ht1414

I can't get the latest version of iTunes 12.0.1 for Windows (64-bit) to work on my laptop.

I can't get the latest version of iTunes 12.0.1 for Windows (64-bit) to work on my laptop. It says it has successfully downloaded and installed, but when I try to connect my new iPhone 6 to iTunes i get an error message 'need to install new software' but i thought i had! Please help me as i have had to connect my phone to someone else's mac and therefor don't have my music etc on my phone HELP! I have had IT support at work trying to figure it out and no one can!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

I just upgraded to the latest software for my pages. When I opened an old document it stripped out all the images I had in my tables. How do I get them back

I just upgraded to the latest software for my pages. When I opened an old document it stripped out all the images I had in my tables. How do I get them back

Don't save. Close the documents.
Pages '09 should still be in your Applications/iWork folder.
Pages 5 will damage/alter older files, something Apple didn't tell its users.
Pages 5 is a severely stripped down version with over 90+ features removed.
We recommend trashing/archiving Pages 5 after Exporting any files you may have saved back to Pages '09.
Also rate/review Pages 5 in the App store.
Peter

Getting the "latest" compressor for FCS1

Similar Messages

Maybe you are looking for