Getting the message Adobe Premiere Elements could not start after silent install

I am getting the following message after running a silent command line installtion.  The coomand line I am using is
setup.exe" /S /UL1033 /V"/qn COUNTRY=244 SERIALNUMBER="xxxx-xxxx-xxxx-xxxx-xxxx-xxxx"  the x64 on Windows 7 64-bit.
After manually running the set-up.exe installer located in the ElementsSTIInstaller folder, Premiere elements launchs.
What is the cause of the error after running a silent installion?
JmFrx

Hi jam62m,
Please follow the steps mentioned in kb article : http://helpx.adobe.com/premiere-elements/kb/silent-install-instructions-premiere-elements- 4.html
and command to install Premiere elements silently is : start/wait OEM.exe /UL%LangCode% /V“SERIALNUMBER=%Adobe volume license serial number%”
Example : C:\ Adobe Premiere Elements 10/Adobe Premiere Elements 10 - 64 Bit> start/wait OEM.exe /UL1033 /V"SERIALNUMBER=1111-1111-1111-1111-1111-1111"
Regards,
Jatin Dembla

Similar Messages

  • Adobe Premiere Elements could not start.  Please uninstall and reinstall.

    Worked with support quite a bit over the past few months.  I am getting the subject named error after selecting the Country after my silent install.
    I was provided application.overide XMLS and using the setup.exe to install the application.  It installs successfully, but does not launch.
    This is on Windows XP.  Not sure what else to do.  We have been attempting to get this to install silently since September.
    Setup.exe /S /v/qn. - is what i am running.  If you reply please don't tell me to use OEM.exe, we have confirmed with Adobe Support that this does not work in my situation.

    newbie9999
    The answers are in the details and they are lacking in the information needed to solve this issue.
    What version of Premiere Elements are you using and on what computer operating system is it running?
    Do you have the latest version of QuickTime installed on your computer with Premiere Elements?
    Are you running the program as Run As Administrator or from a User Account with Administrative Privileges?
    And, as John T. Smith has asked, is your video card driver up to date according to the web site of the manufacturer of the video card?
    All basic Q&A background essentials.
    Uninstall, reinstall is often suggested as part of the no start issue. You could have a bad install. Factors need to be ruled in and out. No guarantees. I would suggest the following scheme for this uninstall, reinstall...I am assuming that you have never gotten into the Premiere Elements workspace with the current (first?) install.
    1. Control Panel, usual uninstall
    2. Run the ccleaner (regular and registry)
    3. Reinstall (with antivirus and firewalls disabled in Action Center).
    What do your computer resources look like? I saw no description of them?
    Let us start with the above and then plan the troubleshooting strategy based on your answers.
    Thank you.
    ATR

  • Premiere cc 2014 crash with message "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again."

    I updated to Premiere Pro CC 2014, all the other Adobe CC 2014 software works great, but Premiere doesnt even load. The starting page (frame) comes up - my whole computer slows down and after a minute or two it crashes completely and comes up with the message :  "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again."
    I'm running a macbook Pro 15" (2014) with 16GB RAM and 760GB SSD.
    PLEASE HELP!

    Hi Delarey,
    Please go to the following location and rename the folder to old_folder name
    User/user  library/Application Support and rename Adobe folder
    User/user library/Preferences and rename the Adobe folder
    Then go to Documents folder and Go to Adobe/Premiere pro/8.0 and rename 8.0 folder
    Make sure that you are in user library if you are not sure check the link below.
    Access hidden user library files | Mac OS 10.7 and later
    Regards,
    Vinay

  • I am trying to install itunes on my computer which is running windows 7, sp1, 64 bit. i get the message 'THIS INSTALLATION PACKAGE COULD NOT BE OPENED.VERIFY THAT THIS PACKAGE EXISTS, ETC'. any ideas how to fix?thanks jake

    i am trying to install itunes on my computer which is running windows 7, sp1, 64 bit. i get the message 'THIS INSTALLATION PACKAGE COULD NOT BE OPENED.VERIFY THAT THIS PACKAGE EXISTS, ETC'. any ideas how to fix?
    thanks jake

    Hello tcampbell1549,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Have a nice day,
    Mario

  • Hello, i cannot update elements 12, i get this message:  Adobe Premiere Elements 12.1 update There was an error installing this update. Please quit and try again later. Error Code: U44M1P2003  Adobe Photoshop Elements 12.1 update There was an error instal

    hello i cannot update elements 12, i get this message:
    Adobe Premiere Elements 12.1 update
    There was an error installing this update. Please quit and try again later. Error Code: U44M1P2003
    Adobe Photoshop Elements 12.1 update
    There was an error installing this update. Please quit and try again later. Error Code: U44M1P2003

    Update 12.1 installation errors | Photoshop Elements, Premiere Elements

  • HT4463 When clicking 'buy' for Mountain Lion in the App store I get the message "product distribution file could not be verified, it may be damaged or was not signed' Anybody know why I get this message. Thanks

    When clicking 'buy' for Mountain Lion in the App store I get the message "product distribution file could not be verified, it may be damaged or was not signed' Anybody know why I get this message. Thanks

    Make sure your Mac qualifies for Mountain Lion  >  Upgrade your Mac to OS X Mountain Lion.
    If you have anti virus software installed, disable that before downloading apps.
    Turn off the Firewall in System Preferences > Security (or Security & Privacy) > Firewall
    Try deleting the cache, cookies, and preference files (plist) associated with the App Store.
    Quit the App Store if it's open.
    Open the Finder. From the Finder menu bar click Go > Go to Folder
    Type this exactly as you see it here:
    ~/Library/Caches/com.apple.appstore/Cache.db
    Click Go
    Move the Cache.db file to the Trash.
    Now here:
    ~/Library/Preferences
    Click Go
    Move these files from the Preferences folder to the Trash.
    com.apple.appstore.plist
    com.apple.storeagent.pllist
    Now here:
    ~/Library/Cookies
    Click Go
    Move the com.apple.appstore.plist file from the Cookies folder to the Trash.
    Empty the Trash, try the App Store.

  • I get the message Ipod detected but could not identify when i plugged in my new 7th gen Nano. Tried troubleshooting steps with no luck. Tried plugging in my old iPod and i get the same message.

    I get the message "Ipod detected but could not identify"when I plugged in my new 7th gen nano. Tried troubleshooting steps with no luck, Treid plugging in my old iPod that worked fine and I get the same message.

    Tried troubleshooting steps with no luck
    Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • Using my apple ID and password on Mobile Me, I get the message  "Verification Failed"  .  Could not communicate with the server.  What am I doing wrong?

    Using my Apple ID and password on Mobile Me, I get the message "Verification Failed".  Could not communicate with the server"  What am I doing wrong?

    There is a MobileMe forum.  You might have better luck their.

  • HT201263 i delete my iphone from find my i phone and now i want to make active my i phone  i get the message  your i phone could not be activated because the activation server failed i try it several time but my iphone is not activate help me fpls

    i delete my iphone from find my i phone and now i want to make active my i phone  i get the message  your i phone could not be activated because the activation server failed i try it several time but my iphone is not activate help me fpls

    Activation issues are almost always the result of a device that has been hacked or jailbroken.  If that is the case, no support can be provided here.
    The other possible issue is a device running the iOS7 Beta.  If that is the case, and you are a developer, sign into the developers forums for assistance.  If that is the case and you are not a developer, try google.

  • I have received the message "Adobe Premiere Pro CS6 Family has been successfully Installed and is re

    I have received the message "Adobe Premiere Pro CS6 Family has been successfully Installed and is ready to use." but I cannot find the program on my computer.

    Hi corinne.blake.1991
    Go to Control Panel -> Program and features -> See if the programs are listed there ...This is for Windows ...

  • Adobe Premiere Elements does not open after installation

    Hello,
    I have written before last week. I have bought Adobe Photoshop Elements 11 and Adobe Premiere Elements 11.
    I had a trial version of Photoshop Elements 11 and with the code I could access the full version.
    However Premiere Elements did not open after installation. I did not had a trial version so I first downloaded the full program. I went through the whole installation process and everything seemed ok, no error messages. But when I tried to open Adobe Premiere Elements after restarting the computer it did not open at all. Nothing happened.
    I have de-installed and re-installed the program for a couple of times over and over again but with not result. Also tried to download the trial version first and also this didn't work. I checked my Quicktime and updated to the latest version.
    I use a Windows laptop: Asus Intel Core i5-2430M, 2,4 GHz
    I hope you can help me out!
    Thanks!
    Inge

    Yes I saw it but PSE (refers to Photo Shop Elements??) and I have trouble with Premiere Elements..(so the video program)
    The Photoshop Elements worked.
    I am not sure what to do here also the link at your reply "working with your operation system tools" didn't work..(got the "broken link error")
    thanks
    Inge

  • When I attempt to install Adobe Reader, I get the message, "This patch package could not be opened."

    Any idea of what I need to do?

    Thanks for your interest in my problem.  My operating system is Windows
    XP.    I had an older version of Adobe Reader installed, but recently, my
    computer became unable to view pdf files.  So I decided to try to update
    my version of Adobe Reader.  Somewhere in the process, it was suggested
    that I delete previous versions of Adobe Reader prior to installing the
    new version, so that's what I did.  Now when I try to download and
    install the version 9 of Adobe Reader, I get the message that , "The
    patch package could not be opened."
    On Sat, 31 Jul 2010 20:05:52 -0600
    =?UTF-8?B?yofJkGIgybnJmXXJmWxsxLHKjQ==?= <[email protected]> writes:
    What is your operating system?
    Do you have an older version of Adobe Reader already installed?
    >

  • Elements 9 will no longer import from my scanner (Epson Stylus SX438W). I get the message "Adobe Photoshop Elements 9 quite unexpectedly".

    May not be connected but I recently upgraded to Mavericks (OS X 10.9.4) on my iMac.  I've checked cables (USB) and all seems ok.  My iMac will also still print to this all-in-one printer so connections seem ok.  I've also noticed that if I try to launch "Epson Scan" I get the message "You can't use this version of the application Epson Scan with this version of OS x - my version of Epson Scan = 3.7.8f0.  Any help please?

    Thanks for your suggestion.  I checked the Epson web site and also their technical help, they gave me their latest driver (which didn't work) but also said there were some issues with Apple's Mavericks (OS X 10.9.4) and said I should get back to Apple.  Not sure were this leaves me with Adobe Elements though - perhaps I should reinstall?  Thanks again for your suggestion.

  • Adobe Premiere Elements 10 not starting up.

    When ever I start up Premiere it opens up with a message that says:
    Premiere Elements 10.0 has encountered an error
    [..\..\Src\EMS\WSEMUtil.cpp-715]

    xpcm
    Thanks for the reply. We may have our answer in your Premiere Elements 10 running on a computer that uses a NVIDIA GeForce card. There is a known issue relating
    to Premiere Elements 10/NVIDIA GeForce with the solution being roll back of the driver version to about May 2013. But, I have not seen it reported before in association
    with the particular error message
    [..\..\Src\EMS\WSEMUtil.cpp-715]
    But because of the history on this matter in
    the Announcement at the top of this forum
    and
    ATR Premiere Elements Troubleshooting: PE10: NVIDIA Video Card Driver Roll Back
    we do need to rule this factor in or out.
    Go to the following site for older version NVIDIA GeForce and plug in your information to download and install the May 2013 driver version
    http://www.nvidia.com/Download/Find.aspx?lang=en-us
    It is the Driver GeForce 320.18 Driver........320.18.......May 23, 2013 that you want.
    Are you working with SD or HD projects?
    Please review and consider and then let us know the outcome. The references cited with give you a
    comprehensive view of the Premiere Elements 10/NVIDIA situation.
    Thank you.
    ATR

  • Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again.

    I have administrator rights to the computer. The drivers are up to date. But I am still getting the error message "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again"  when opening Premier Pro CS5.5. This appears to have happed after I upgraded to Mac OS 10.10.2.
    Anyone?
    Thanks

    Hi Stan.
    I had the same problem as you did though I am using Adobe CC.  I saw nobody replied to you so perhaps my eventual success on my later version may have applications to the error on your version. 
    Anyhow, I did all the suggestions found here (Error "Premiere Pro could not find any capable video play modules" | Startup )  first and updated my NVidea card to no avail.  Eventually what did the trick was this...
    After mucking about with the video card, I said "OK lets just have a go at Premiere itself." So I uninstalled Premiere CC and reinstalled it.  Now for some reason it didn't give me the latest patch but a slightly earlier version than the current one but lo and behold it was fine with the video card again.  I was able to get my friend's video imported and quickly edited but then was having some issues with exporting where it would hang up but I went into Adobe Media Encoder and exported it there without a care.  That task out of the way, I then went and made the update to the latest patch and it works perfectly fine - no video driver issues.
    So short of it is this - if you've updated your drivers, perhaps what you could try uninstalling and reinstalling Premiere.
    Let me know if this works.
    Cheers and good luck

Maybe you are looking for