Getting the messeage request timed out when trying to ping
I can't ping but can be pinged. Done all the steps here: /t5/Hamachi/Ping-Request-Timed-out/td-p/121480 still no succes. I have made rules regarding hamachi in my firewall and i have ran diagonstics in hamachi, it says everything is allright, but still the pings doesn't work. Can be pinged though. I am running Win 10 64bit. But one thing that have caught my interest is this, the hamachi network driver seems to not have a internet connection, but maybe this is normal? : https://gyazo.com/bfbe4e6bcf0b0caff44fdadabaaae865 Translation from swedish:IPv4 Connection: No Network Connection.IPv6 Connection: No Internet Connection. I hope someone out there has the answer to my question! Thanks in Advance!! Best Regards, FiskarN, AkA Elias!
Hi S.Akmal,
The request timed out also can caused by the remote computer no replayed, you can try to check the remote server whether it have some network issue, you also can connect this
server to another server directly(just connect them with cable) then try the ping then can determine whether issue occur on this server.
More information:
Internet Control Message Protocol (ICMP) Basics
https://support.microsoft.com/en-us/kb/170292
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Similar Messages
-
I want to troubleshoot what causing the connection unstable between workstation and server. When i try do the ping test, the reply sometime 'Request timed out' Any idea what likely the cause of this issue?
I tried change network adapter, change network cable, change network port, reassign different ip address to the server. Still the result remain. I got another server on the same rack and same ip segment(base), but the other server is ok.
Any idea on this guys?
Thanks.Hi S.Akmal,
The request timed out also can caused by the remote computer no replayed, you can try to check the remote server whether it have some network issue, you also can connect this
server to another server directly(just connect them with cable) then try the ping then can determine whether issue occur on this server.
More information:
Internet Control Message Protocol (ICMP) Basics
https://support.microsoft.com/en-us/kb/170292
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
VPN client get connect but Request Timed out when ping
Hi, I'm using the cisco 837 router as my VPN server. I get connected using Cisco VPN Client Version 5. But when I ping the router ip, i get request timed out. Here is my configuration :
Building configuration...
Current configuration : 3704 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname michael
boot-start-marker
boot-end-marker
memory-size iomem 5
no logging console
enable secret 5 $1$pZLW$9RZ8afI8QdGRq0ssaEJVu0
aaa new-model
aaa authentication login default local
aaa authentication login sdm_vpn_xauth_ml_1 local
aaa authorization exec default local
aaa authorization network sdm_vpn_group_ml_1 local
aaa session-id common
resource policy
ip subnet-zero
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.1.1
ip dhcp pool michael
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 202.134.0.155
ip dhcp pool excluded-address
host 192.168.1.4 255.255.255.0
hardware-address 01c8.d719.957a.b9
ip cef
ip name-server 202.134.0.155
ip name-server 203.130.193.74
vpdn enable
username michael privilege 15 secret 5 $1$ZJQu$KDigCvYWKkzuzdYHBEY7f.
username danny privilege 10 secret 5 $1$BDs.$Ez0u9wY7ywiBzVd1ECX0N/
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp xauth timeout 15
crypto isakmp client configuration group michaelvpn
key vpnpassword
pool SDM_POOL_1
acl 199
netmask 255.255.255.0
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map SDM_DYNMAP_1 1
set transform-set ESP-3DES-SHA
crypto map SDM_CMAP_1 client authentication list sdm_vpn_xauth_ml_1
crypto map SDM_CMAP_1 isakmp authorization list sdm_vpn_group_ml_1
crypto map SDM_CMAP_1 client configuration address respond
crypto map SDM_CMAP_1 65535 ipsec-isakmp dynamic SDM_DYNMAP_1
interface Ethernet0
description $FW_INSIDE$
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1452
hold-queue 100 out
interface Ethernet2
no ip address
shutdown
hold-queue 100 out
interface ATM0
no ip address
no atm ilmi-keepalive
dsl operating-mode auto
pvc 0/35
pppoe-client dial-pool-number 1
interface FastEthernet1
duplex auto
speed auto
interface FastEthernet2
duplex auto
speed auto
interface FastEthernet3
duplex auto
speed auto
interface FastEthernet4
duplex auto
speed auto
interface Virtual-PPP1
no ip address
interface Dialer1
description $FW_OUTSIDE$
mtu 1492
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
ppp chap hostname ispusername
ppp chap password 0 isppassword
ppp pap sent-username ispusername password 0 isppassword
crypto map SDM_CMAP_1
ip local pool SDM_POOL_1 192.168.2.1 192.168.2.5
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
ip http server
no ip http secure-server
ip nat inside source static udp 192.168.1.0 1723 interface Dialer1 1723
ip nat inside source static tcp 192.168.1.4 21 interface Dialer1 21
ip nat inside source route-map SDM_RMAP_1 interface Dialer1 overload
access-list 1 remark SDM_ACL Category=16
access-list 1 permit 192.0.0.0 0.255.255.255
access-list 102 remark SDM_ACL Category=2
access-list 102 deny ip 192.168.1.0 0.0.0.255 192.168.2.0 0.0.0.255
access-list 102 permit ip 192.168.1.0 0.0.0.255 any
access-list 199 permit ip 192.168.1.0 0.0.0.255 192.168.2.0 0.0.0.255
route-map SDM_RMAP_1 permit 1
match ip address 102
control-plane
banner motd ^C
Authorized Access Only
UNAUTHORIZED ACCESS TO THIS DEVICE IS PROHIBITED
You must have explicit permission to access this device.
All activities performed on this device are logged.
Any violations of access policy will result in disciplinary action.
^C
line con 0
no modem enable
line aux 0
line vty 0 4
scheduler max-task-time 5000
end
Thank you, anny help will be appreciated.Thank you for your response, here is the debug :
Log Buffer (4096 bytes):
1 15:19:47.011: ISAKMP: set new node 856647599 to QM_IDLE
May 1 15:19:47.015: ISAKMP:(0:8:SW:1):Sending NOTIFY DPD/R_U_THERE_ACK protocol 1
spi 2182802952, message ID = 856647599
May 1 15:19:47.015: ISAKMP:(0:8:SW:1): seq. no 0xA3285B8A
May 1 15:19:47.015: ISAKMP:(0:8:SW:1): sending packet to 120.168.1.24 my_port 4500 peer_port 52667 (R) QM_IDLE
May 1 15:19:47.019: ISAKMP:(0:8:SW:1):purging node 856647599
May 1 15:19:47.019: ISAKMP:(0:8:SW:1):Input = IKE_MESG_FROM_PEER, IKE_MESG_KEEP_ALIVE
May 1 15:19:47.019: ISAKMP:(0:8:SW:1):Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE
May 1 15:19:49.979: %SYS-2-BADSHARE: Bad refcount in pak_enqueue, ptr=81B4F274, count=0
-Traceback= 0x80137488 0x801DC350 0x801DDDA8 0x801E6860 0x807103F4 0x807F99F8 0x801E698C 0x8043FB10 0x8043FDC8 0x80D23CD0 0x80D24304 0x80D24400 0x8027B3C4 0x8027E9E0
May 1 15:19:49.983: %SYS-2-BADSHARE: Bad refcount in datagram_done, ptr=81B4F274, count=0
-Traceback= 0x80137488 0x801D8830 0x801DDFD8 0x801E6860 0x807103F4 0x807F99F8 0x801E698C 0x8043FB10 0x8043FDC8 0x80D23CD0 0x80D24304 0x80D24400 0x8027B3C4 0x8027E9E0
May 1 15:19:55.127: %SYS-2-BADSHARE: Bad refcount in pak_enqueue, ptr=81B51C44, count=0
-Traceback= 0x80137488 0x801DC350 0x801DDDA8 0x801E6860 0x807103F4 0x807F99F8 0x801E698C 0x8043FB10 0x8043FDC8 0x80D23CD0 0x80D24304 0x80D24400 0x8027B3C4 0x8027E9E0
May 1 15:19:55.127: %SYS-2-BADSHARE: Bad refcount in datagram_done, ptr=81B51C44, count=0
-Traceback= 0x80137488 0x801D8830 0x801DDFD8 0x801E6860 0x807103F4 0x807F99F8 0x801E698C 0x8043FB10 0x8043FDC8 0x80D23CD0 0x80D24304 0x80D24400 0x8027B3C4 0x8027E9E0
May 1 15:19:58.383: ISAKMP (0:134217736): received packet from 120.168.1.24 dport 4500 sport 52667 Global (R) QM_IDLE
May 1 15:19:58.383: ISAKMP: set new node -1340288848 to QM_IDLE
May 1 15:19:58.387: ISAKMP:(0:8:SW:1): processing HASH payload. message ID = -1340288848
May 1 15:19:58.387: ISAKMP:(0:8:SW:1): processing NOTIFY DPD/R_U_THERE protocol 1
spi 0, message ID = -1340288848, sa = 81A7DCEC
May 1 15:19:58.387: ISAKMP:(0:8:SW:1):deleting node -1340288848 error FALSE reason "Informational (in) state 1"
May 1 15:19:58.387: ISAKMP:(0:8:SW:1):Input = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY
May 1 15:19:58.387: ISAKMP:(0:8:SW:1):Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE
May 1 15:19:58.391: ISAKMP:(0:8:SW:1):DPD/R_U_THERE received from peer 120.168.1.24, sequence 0xA3285B8B
May 1 15:19:58.391: ISAKMP: set new node -752454119 to QM_IDLE
May 1 15:19:58.395: ISAKMP:(0:8:SW:1):Sending NOTIFY DPD/R_U_THERE_ACK protocol 1
spi 2182802952, message ID = -752454119
May 1 15:19:58.395: ISAKMP:(0:8:SW:1): seq. no 0xA3285B8B
May 1 15:19:58.395: ISAKMP:(0:8:SW:1): sending packet to 120.168.1.24 my_port 4500 peer_port 52667 (R) QM_IDLE
May 1 15:19:58.399: ISAKMP:(0:8:SW:1):purging node -752454119
May 1 15:19:58.399: ISAKMP:(0:8:SW:1):Input = IKE_MESG_FROM_PEER, IKE_MESG_KEEP_ALIVE
May 1 15:19:58.399: ISAKMP:(0:8:SW:1):Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE
May 1 15:19:59.887: %SYS-2-BADSHARE: Bad refcount in pak_enqueue, ptr=81B51C44, count=0
-Traceback= 0x80137488 0x801DC350 0x801DDDA8 0x801E6860 0x807103F4 0x807F99F8 0x801E698C 0x8043FB10 0x8043FDC8 0x80D23CD0 0x80D24304 0x80D24400 0x8027B3C4 0x8027E9E0
May 1 15:19:59.887: %SYS-2-BADSHARE: Bad refcount in datagram_done, ptr=81B51C44, count=0
-Traceback= 0x80137488 0x801D8830 0x801DDFD8 0x801E6860 0x807103F4 0x807F99F8 0x801E698C 0x8043FB10 0x8043FDC8 0x80D23CD0 0x80D24304 0x80D24400 0x8027B3C4 0x8027E9E0
May 1 15:20:05.667: %SYS-2-BADSHARE: Bad refcount in pak_enqueue, ptr=81F84148, count=0
-Traceback= 0x80137488 0x801DC350 0x801DDDA8 0x801E6860 0x807103F4 0x807F99F8 0x801E698C 0x8043FB10 0x8043FDC8 0x80D23CD0 0x80D24304 0x80D24400 0x8027B3C4 0x8027E9E0
May 1 15:20:05.667: %SYS-2-BADSHARE: Bad refcount in datagram_done, ptr=81F84148, count=0
-Traceback= 0x80137488 0x801D8830 0x801DDFD8 0x801E6860 0x807103F4 0x807F99F8 0x801E698C 0x8043FB10 0x8043FDC8 0x80D23CD0 0x80D24304 0x80D24400 0x8027B3C4 0x8027E9E0
After searching thru the internet, I've found :
CSCsb46264
Symptoms: When a dialer interface is configured as an endpoint for a IPSec+GRE tunnel, tracebacks with bad refcount may be generated.
Conditions: This symptom is observed on a Cisco 837 when router-generated packets such as routing updates are being switched.
Is that possible that the root of the problem was that ? Thank you. -
I have a web app that is backed by a an Azure SQL Database. The problem is that I had multiple issues when connecting to the database mainly when trying to establish a connection, or timeouts. This is the log I just encountered when trying to use the web
app.
[Win32Exception (0x80004005): The wait operation timed out]
[SqlException (0x80131904): Connection Timeout Expired. The timeout period elapsed while attempting to consume the pre-login handshake acknowledgement. This could be because the pre-login handshake failed or the server was unable to respond back in time. The duration spent while attempting to connect to this server was - [Pre-Login] initialization=21970; handshake=1; ]
System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions, DbConnectionInternal& connection) +671
System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection) +116
System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection) +1012
System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions) +6712291
System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry) +152
System.Data.SqlClient.SqlConnection.Open() +229
System.Data.EntityClient.EntityConnection.OpenStoreConnectionIf(Boolean openCondition, DbConnection storeConnectionToOpen, DbConnection originalConnection, String exceptionCode, String attemptedOperation, Boolean& closeStoreConnectionOnFailure) +102Hi Affar2k,
According to your description, we need to verify if there is no network issue and the Sqlclient version is older than .NET 4.5. You can try to connect to the Windows Azure SQL database via SSMS and check if it can run well. When you
connect to the SQL Azure database via ADO.NET, you need to verify that the server name and passwords are right in the connection string.
For more information, you can review the following article about how to connect to Windows Azure SQL Database using ADO.NET.
http://msdn.microsoft.com/en-us/library/windowsazure/ee336243.aspx
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support -
As suggested by Firefox, I cleared my history and cache. I also downloaded and ran one of the Firefox recommended malware applications. I also removed Firefox from my firewall and then added it back as suggested by Firefox. I have no problem accessing the site using Internet Explorer.
Thanks jscher2000. Yes, in Safe Mode I was able to go the site. I read the possible ways that Firefox suggests to try to fix the problem, i.e., go through all my extensions to find the problem or reset Firefox to the original factory settings. Where do you suggest I go from here?
-
I get this message "request timed out" everytime i tried to play a video .
I've been having this problem for serval months now and it's annoying at first i used to watch videos and movies normal , but now everytime i try to visit a website to watch a movie when i click play i get this message " request timed out " after two minutes , i have downloaded google chrome , and it worked fine only for serval mins and then when i try to play or watch movies it's still giving the same error , btw i'm connected to internet via my home wifi connection , and yeah i restarted the ipad and switched the router off and on again and nothing changed , what is wrong with my ipad , how could i solve this annoying issue !
I've been having the same issues too, and thought it was just my outdated computer or account?!
Every time I try to purchase a song, "session has timed out" shows up after I click "agree" to the terms!? I seem to be in the exact same scenario as 'SportsBarn' above: Itunes support have replied repeatedly with the same "solutions" but nothing has helped or even been applicable. I have an older laptop, 2005 Powerbook running OS X 10.4 Tiger so it's not compatible with the latest iTunes 10.5.2 which requires minimum OS X 10.5. I've been using the balance already in my iTunes account (from redeemed giftcards over the past few years) with no problem, until recently (my last successful purchase was October 2011). I wonder if it's the older OS or just a redemption glitch even with newer computers? -
ITunes store keeps saying that my session has timed out when trying to buy a product from the store
I Tunes is telling me that my session has timed out when trying to buy a gift voucher, which i have done many times before.
The most recent change i'v made to my computer before this happened was to download an update (MacOSX updatecombo 10.7.3dmg)
a couple of weeks ago. I'v turned off the firewall as suggested whilst trying to transact and turned it back on again, but don't know
what else to try. The problem is three days old as i left and came back to it to see if there might be a glitch in the system.
I'v been able to access the credit i have in the store, but not buy the itunes voucher to email to my own a/c. Please help someone if you can
Sandystone.Thanks for your suggestion Ned01, I tried this as a last ditch attempt, unfortunatly it made no difference in my case, but i'm pleased it did for you. However, because you reminded me to have another go at this problem, i tried something else (which i'd unsucsessfuly tried before), that is, i deleted the 'CLICK & SAVE " a/c i'd set up recently, and reverted to my previous payment me and would you know it , this time it worked !! I set up a trail purchase and it worked.
It seems to me that other poeple with this problem have to solve it by trail and error, but thank you for your help.Sandystone.. -
i'm trying to redeem my itunes gift card and i get the message "session timed out." does anyone know why i'm not able to redeem my card and why i get this message in stead?
I've been having the same issues too, and thought it was just my outdated computer or account?!
Every time I try to purchase a song, "session has timed out" shows up after I click "agree" to the terms!? I seem to be in the exact same scenario as 'SportsBarn' above: Itunes support have replied repeatedly with the same "solutions" but nothing has helped or even been applicable. I have an older laptop, 2005 Powerbook running OS X 10.4 Tiger so it's not compatible with the latest iTunes 10.5.2 which requires minimum OS X 10.5. I've been using the balance already in my iTunes account (from redeemed giftcards over the past few years) with no problem, until recently (my last successful purchase was October 2011). I wonder if it's the older OS or just a redemption glitch even with newer computers? -
Why wen I put in my password I get a message 'request timed out'
Why wen I put in my password I get a message 'request timed out'
Hi there Nechama B.,
You may find the troubleshooting steps in the article below helpful.
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/ts3970
-Griff W. -
I keep getting the message "unable to authenticate" when trying to sign in to the YouTube app. The website allows me to sign in just fine. Anyone know how to fix this?
Try "resetting" the iPad...
Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.
edited by: cs -
Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY . Looking for solution.
Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
First, empty the Trash, if possible.
Triple-click anywhere in the line below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) 2>&- | wc -l | pbcopy
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign ($) to appear.
The output of the command will be a number. It's automatically copied to the Clipboard. Please paste it into a reply.
The Terminal window doesn't show the output. Please don't copy anything from there. -
I keep getting the message-blocked plug-in when trying to use Adobe Flash Player. A message also states that I don't have a up to date flash player but I know that I have the right version of Flash player.
Hello,
Safari, blocked plug-ins…
http://support.apple.com/kb/HT5271 -
can someone please tell me why I do not get the delete from disk option when trying to delete duplicate items
The content must be in the iTunes directory structure for that option to appear.
-
Customer Getting "The MX connection timed out."When Joining The Beehive OWC
Hello,
I have attempted to use the Beehive client for initiating the owc with customers, and in 60-70% if the cases, they end up getting the message, "The MX connection timed out".
I don't know how to get around this issue, will appreciate if someone has a fix or work around to overcome this issue.
I am working on a Win 7 platform, Beehive Conferencing 2.0.1.7.0
I am also having an issue when starting an owc. Beehive (by default) assigns 'My Personal Workspace' as the location of my conference. But when I click on the dropdown,
on the second line, I see "loading", but nothing ever loads.
Thanks.
Anees.Hi Phil,
I am getting the same error message MX connection timed out.
(I am Oracle customer). My desktop running window 7, has latest JRE 7 update 21 installed. still getting the error.
Couldn't get beehive running, but no issue when using the old web conference RTC real-time collaboration from Oracle.
Any ideas what else I need to do to fix this. (Oracle customer support very much give up and frustrate too).
Thank you.
Elizabeth. -
This message "The connection has timed out" only happens when i attempt to log on to my blackboard account for college. All other log in' work fine.
Thanks. So there's no means of knowing whether a text message has been delivered, not to mention time of delivery. Perhaps I've gone for the wrong phone. It might do a lot but seems to miss out on some basics.
Maybe you are looking for
-
How do i change the apple ID on my Imac
I have two apple ID accounts. I want all of my apple devices signed into the same apple ID. How can I change the apple ID that I am signed into on my iMac?
-
Is Credit Check Total the same as Experian credit tracker?
Any difference in the two? I use Experian, but wondered if there was a better deal with CCT??
-
I am going crazy. I moved photos from an external hard drive to a new computer. The photos are in my Pictures photo in finder. But everything I tried to work with them in Lightroom, I get a "Photo is missing". I use the locate photo function, but I d
-
A few questions on making animated buttons for a website Nav
Hello, I have a few questions on creating some animated buttons for a nav. There are 2 actions I want to trigger on moue over. If I want to use a static (PNG) image that I created in Photoshop for the actual button, can I use that? I want to smoothly
-
I have been unable to activate my new iphone 6. When I call the activation phone number it just says terms and conditions have been accepted on this account. Please help.