Getting the most out of Aperture and FCP

I have been unable to find a thread answering my questions so I thought I'd post my own. I'll start off with a little background info. I do a lot of image processing in Raw with 10MP and 12MP images and would like to run Aperture on my future G5 flawlessly. Also, I will be editing in SD with Final Cut Pro and running Motion in SD. Basically, I would like to purchase a system that will allow me to get the most out of these two programs for what I want to do. I want to make sure I get what I need in all aspects, Ram, GHZ, and graphics card, and bus speed. I have read that some of the older like dual 2.5 GHZ machines are better than some of the dual cores because they have faster bus speeds. Now I am not sure if bus speed is a concern with what I want to do hence my questioning. As you can see I currently have a 1ghz G4 PowerBook and to make things simple it is drowning with the work I am trying to do. Running Aperture and apple Motion is not even possible on my current machine.
Thanks!

First, the current Dualcore 2.3 G5 has a 1.15ghz front side bus speed. However a quick look back to previous models shows dual 2.5 and 2.7ghz machines with like 1.25ghz front side bus. So my first question is like a dual 2.5 or 2.7ghz where I should be looking? I think so... Like personally is the dual 2.7ghz you have all you need or could you see a faster machine being better? When it comes to editing Raw in Aperture I'll come in from a sports event with like 100's of images on my plate and I will first knock out the bad ones and then end up with like 100-200 images to do light adjustments that are good enough for proofs. Basically I am looking for what is the "sweet spot" as you mentioned for a G5. Like I am not sure if a Quad 2.5ghz is necessary and I think for what I'm doing it is overkill. You mentioned 4GB is the sweet spot, thank exactly the kind of information I was looking for. And lastly I want a solid graphics card. If I were to buy a new G5 I would be looking at like the 7800 with 256MB. I'm curious to how this compares to like the ATI Radeon 9800 Pro for example. I would assume that newer the better...
Thanks

Similar Messages

I'm relatively new to Mac and want to try and get the most out of the new MacBook Air.   My wife and I have been sharing the same Apple ID. We both have iPhones - she has a 5 and I've got a 4S.   We only have one copy of iTunes and we have been sharing t

I'm relatively new to Mac and want to try and get the most out of the new MacBook Air.
My wife and I have been sharing the same Apple ID. We both have iPhones - she has a 5 and I've got a 4S.
We only have one copy of iTunes and we have been sharing the account. (She doesn't really use the computer for anything beyond writing the odd weekend assignment.)
Would I be better off setting her up with her own and making her as a separate user on the computer? Would this require much work?
In recent times with updates, we have a few problems with the duplication of texts and that sort of thing. Both of our texts are stored on the computer and that sort of thing. Also, sometimes texts I send her are sent through to me from her, if that makes any sense.
Anyway, I don't really want to overly complicate matters when it comes to accounts etc, but I wanted to know if a fresh Apple ID would be the best thing or even a new user?
Any tips etc would be greatly appreciated
Thanks in advance
MacBook
I have this question too (0) Reply

Your question is almost too much a personal one, begging the question "do we (husband and wife) feel comfy sharing one account on the Mac"   maybe thats why nobody answered you.
It doesnt complicate anything, but it adds steps for switching accounts on the Mac/ purchases etc. of course
since your question is mostly personal, ..I wont answer THAT part of it, but creating a new account is easy.....messing with switching back and forth is also a personal preference 'issue' as well.   I prefer to keep things simple, but...........you and yours, I dont know.......
http://support.apple.com/kb/PH11468

Can anyone recommend a good "How To" Book. I have switched to a MacBook pro 15 inch. and I woiuld really like to learn the basics and get the most out of my Mac.

I want to be able to get the most out of my MacBook pro. Any suggestions on a good book to read?

Switching to a Mac For Dummies, 2nd Edition

Get the most out of a Mega PC

Hi. I'm new :D
I recently bought a Mega 651 to make a bit of a media project
[that I don't really need since my internet PC is already next to the TV and stereo]
and now I am looking at how to get the most out of it.
So I'm interesting in knowing what you've done, or know can be done, with this box. Be it software, hardware or modifications. I know there are alot of threads out there, and I've read alot of them, but I wanted to do a new one which focused a bit on possibilities.
I've fitted mine with a celeron 2.4, 1 gig ram, and a 80 or so GB HDD.
The box is as noisy as a 21" industry rack I have to do something about it.
Some of the blame has to be put on the disk and I'm gonna replace it when I have time for two windows reinstallations
So, here are some conversation starters.
Motherboard
MS-6760. Does it conform to any size/form standard?
Are there other motherboards that can be fitted into this box?
Would the boards of other Mega PCs fit? Are they available for sales?
Power Supply Unit
Something is making noise, even when I remove the hard drive.
The PSU in my box is a FSP250-60MS, max 250 W.
However, on a review I saw it to be fitted with an ENHANCE ENP-2920, 200 W.
I understand the PSU is custom made to give power to the HIFI parts. But are there alternatives that will fit? Are there alternatives if I don't need the radio/CD? Or are the dimentions all wrong anyway... (Measured it to roughly something like 7x14x10 cm)
System fans
The PSU, the CPU and the mainboard have fans. Has anyone had any luck in reducing noise by replacing any of these? What is required (screws, soldering...), are the fan sizes standard? Did you burn down your house?
Remote Control Unit
I believe the key word here is "Girder". I've briefly encountered this program before - a program to read the signal of a remote, and assign actions. If I remember correctly, it is not freeware? Is it so, that the remote can be used with Girder? Will Girder read another remote on the same sensor? Are there alternatives to Girder?
Display
From what I've read, this display is no fun what so ever. Or? Anyone done anything neat with it?
TV/Video
I have a ATI all in wonder lying around somewhere, TV tuner and video out. Are you people all using the default TV software or are there alternatives worth playing with?
Radio Software
Anyone using something other than the default MSI software?
Media Center Software
I've never tried anything like Media Portal and frankly I'm a bit uncertain of what makes it different from a media player. What are you using, and why?
Anything else you'd like to mention?
Please do!
It's okay if you point me to another thread that already describes something like this, as long as you leave a hint at what you're finding interesting in the other thread. And you only have to answer the questions you want to
Let the ideas flow.
.t

here are a few replies to your queries about the Mega 651:
Motherboard:
this is a custom built board designed for the mega 651. you might find that the boards in other megas MIGHT work, but they are not available for sale
in any case, i think the 865 and 180 would be different anyway as they use a different LCD display and i imagine the connector might be slightly different
Power Supply Unit:
again this is a custom design for the Mega series, the only way you might quieten it down is by opening it up and replacing the fan for a quiet type
System fans:
having looked inside my mega 651 a few times, there is only one fan for the CPU, the chipset is passively cooled. the cpu fan noise has never really bothered me as it is temperature controlled - when the cpu is under load it does speed up, when it is not it stops! as far as i can see, the heatsink/fan is also a custom design
Display:
forget about it - msi won't release any SDKs for this and probably never will
TV / Video:
you can use any tv card and its software that you are happy with - there is no specific reason to use an MSI card
media center software:
the intervideo software provided with the mega 180 and 865 also works with the 651 (if you can get hold of it anywhere). however it is a load of rubbish, and if you do need anything like that, then media portal is going to be your best bet
find out more at http://mediaportal.sourceforge.net
the trick with these mega pcs is not to expect too much from them!! they are a nice idea, but i think they were rushed to the market too soon in order to steal a march on their other SFF rivals - the next generation of mega PC will hopefully address all the issues we've experienced and make them proper HTPCs!!
good luck!

Course to take to get the most out of OBI EE

Could you tell me what courses I could take to get the most out of OBI EE? What languages I could use? Java, .Net? database courses?
My background is vb database programmer, a little .Net, a little C++, etc.
Thanks!

Your question is almost too much a personal one, begging the question "do we (husband and wife) feel comfy sharing one account on the Mac" maybe thats why nobody answered you.
It doesnt complicate anything, but it adds steps for switching accounts on the Mac/ purchases etc. of course
since your question is mostly personal, ..I wont answer THAT part of it, but creating a new account is easy.....messing with switching back and forth is also a personal preference 'issue' as well. I prefer to keep things simple, but...........you and yours, I dont know.......
http://support.apple.com/kb/PH11468

Getting the most out of BB Talk

Hello all,
I've just set up my BB Talk account and trying to work the way to get the most out of it.
First question is that now l have plugged my cordess phone base station into it, with three handsets, why would l ever want to switch back to the landline. Don't l just now continue making VOIP calls or is there a catch?
I've also heard l can be abroad but people can ring me on my BB talk number and l can recieve the call wherever l am. Is this as simple as using the call forwarding option in the BB talk options, or is there something a bit more clever that can be done.
Can l make different handsets ring depending on whether the landline or bbtalk number is called.
Regards, Paris700507

Hi
Welcome to the forum.
There would be no real reason to now use your landline just a few points to remember.
1. The number displayed when you call out will now be your BB talk number and not your landline number, I know this can confuse some people as the called person does not recognise the number or thinks you have changed you number.
2. If people still call you on your landline number and you have 1571 don't forget to dial a 5 on your BB talk number 1st and then dial 1571 (dialling 5 will let you access your landline).
3. If you require any calling features you can add them yourself by logging into your BB Talk account here: https://service.btbroadbandvoice.bt.com/selfcare/consumerYourAccount
4. You can change the ringing options by logging into the home hub, details shown
http://bt.custhelp.com/app/answers/detail/a_id/7718/c/345,354,380
Hope this helps
(If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
If I have solved your Issue please click the "Mark as accepted solution" button.

Getting the most out my battery

hi all, i am very happy with my MacBookPro, i have said this before but let me tell you all again, I am NEVER EVER going back to Windose.
I would like to get the longest life i can out of my battery, i have had my lap top about 7 weeks and using Coconut i can already see that the battery capacity is getting less slowly, it has been charged up 35 times at least once every two days sometimes once a day. I had someone on here suggest that you should remove it from the mains when it is fully charged and use it on the battery even when at home and only a few feet from the mains.
I have carried out at least two "calibrations", i still dont know how that really helps.
However as the life of the battery is more determined by the number of times it is charged up, than the ammount of time it is used, after it is charged up and still on the mains.
What is best to get the most out of my battery ?.
tim

I had someone on here suggest that you should remove it from the mains when it is fully charged and use it on the battery even when at home and only a few feet from the mains.
This is bad advice. It's unnecessary, unhelpful, and counterproductive, in that a) it will cause your battery to cycle much more often than is necessary and useful, and b) it will typically result in running the battery down to nothing before recharging it, which is very hard on the battery and will shorten its useful lifespan.
As long as you use your computer on battery power for an hour or two every day or two or three to give it the exercise it needs, it's advisable to keep it plugged into AC power as much of the rest of the time as is convenient. There is nothing whatever to gain by unplugging the AC adapter as soon as the battery is fully charged. It can't be overcharged or harmed in any other way by leaving it plugged in 95-98% of the time, as long as it gets a little regular exercise and you calibrate it every two or three months.

Getting the most out of my T400 for light gaming

So I just got a used T400 to play around with while I'm overseas. It is the model with the P9400 and ATI HD3470. It was an old corporate laptop that was refurbished and sold over ebay. So far it has been great. I know not to expect great performance when gaming but I'm wondering if anyone has any tips and tricks to really get the most out of it.
Do you think it would be worth it to open it up and blow it out? Also, the battery is a 9-cell but I'm only getting about 3 hours out of it. I know it is from sitting at a desk for years just plugged in all the time. Is there anything I can do to improve it? Or should I just get a new one?
Thanks so much!

Other than upgrading the hardware (you could also uprade to a larger faster hard drive or even SSD)...
For YouTube (and other web sites that use Flash-based video), install ClickToPlugin Safari extension
http://hoyois.github.com/safariextensions/clicktoplugin/
In YouTube, with Safari and ClickToPlugin, HTML5-based version of the video (which is there mostly for mobile devices like iPhone and iPad) often gets played instead of the Flash-based version. HTML5 video is more efficient, especially on PowerPC Macs. On my Power Mac G5, playback is noticeable better with the HTML5 content (compared to Flash). Also, ClickToPlugin prevents Flash-based ads on the same web page from loading, taking more load off the aging G5 processor.
Create a new user account in System Preferences Accounts pane. Log out and log in to the new user account (do not use Fast User Switching). Do the things you normally to on your iMac using the new user account. If things seem to run better in the new account, you should investigate what is happening in your normal user account. You may have background processes (that start up automatically when you log in) which may or may not be necessary. These may come from apps you have installed over time, which you may no longer use regularly.

Getting the most out of my 7100i

I really need someone's help. I'm not that Blackberry savvy. I've had my device for about 2 years, and still only use it primarily for the phone and occasional email. I originally got the phone because my company utilized the direct connect and email alot. I no longer work fot that company, but am still locked into my phone contract. So, I want to get the most out of my phone, and I don't know all of it's capabilities. Specifically, I want to know if it has capabilities similar to my Palm z22. I'm tired of carrying 2 devices.
Any input/advice/criticism(preferably constructive) would be most appreciated.
Thanks from a blackberry illiterate.

Other than upgrading the hardware (you could also uprade to a larger faster hard drive or even SSD)...
For YouTube (and other web sites that use Flash-based video), install ClickToPlugin Safari extension
http://hoyois.github.com/safariextensions/clicktoplugin/
In YouTube, with Safari and ClickToPlugin, HTML5-based version of the video (which is there mostly for mobile devices like iPhone and iPad) often gets played instead of the Flash-based version. HTML5 video is more efficient, especially on PowerPC Macs. On my Power Mac G5, playback is noticeable better with the HTML5 content (compared to Flash). Also, ClickToPlugin prevents Flash-based ads on the same web page from loading, taking more load off the aging G5 processor.
Create a new user account in System Preferences Accounts pane. Log out and log in to the new user account (do not use Fast User Switching). Do the things you normally to on your iMac using the new user account. If things seem to run better in the new account, you should investigate what is happening in your normal user account. You may have background processes (that start up automatically when you log in) which may or may not be necessary. These may come from apps you have installed over time, which you may no longer use regularly.

Getting the most out of my iMac G5 2.0 GHz

Hi everyone!
I have an iMac G5 (ALS) 2.0GHz, 1GB SDRAM, 160GB Hard drive which is running on OS 10.5.8.
It's fully for my one use, and just as an extra; but I was just wondering if any of you had some advice for getting the most out of my PowerPC Mac. (Appart from increasing my RAM-memory, I know 1GB isn't much.)
Thanks!
Gijs

Other than upgrading the hardware (you could also uprade to a larger faster hard drive or even SSD)...
For YouTube (and other web sites that use Flash-based video), install ClickToPlugin Safari extension
http://hoyois.github.com/safariextensions/clicktoplugin/
In YouTube, with Safari and ClickToPlugin, HTML5-based version of the video (which is there mostly for mobile devices like iPhone and iPad) often gets played instead of the Flash-based version. HTML5 video is more efficient, especially on PowerPC Macs. On my Power Mac G5, playback is noticeable better with the HTML5 content (compared to Flash). Also, ClickToPlugin prevents Flash-based ads on the same web page from loading, taking more load off the aging G5 processor.
Create a new user account in System Preferences Accounts pane. Log out and log in to the new user account (do not use Fast User Switching). Do the things you normally to on your iMac using the new user account. If things seem to run better in the new account, you should investigate what is happening in your normal user account. You may have background processes (that start up automatically when you log in) which may or may not be necessary. These may come from apps you have installed over time, which you may no longer use regularly.

How Can I get the MOST out of my Ipod?

greetings yall!!
Sean Price in the house.. this is NOW my third Ipod..its the Product RED Ipod Nano.. mad nice..
but I feel as if I'm missing something.. I mean all I do is put music on there and JUST NOW i have learned to put my music videos on it..
BUT come on.. I have heard YOU can do SO MUCH more then just that..
I mean its like i have these video Ipods and I'm just using them as SHUFFLE ipods, you feel me?
I mean I also have the red shuffle 2nd generation Ipod as well... and for that one yeah it makes sense all I CAN DO is play music on that one..
but please SOMEBODY please give me the FULL breakdown on how to get the MOST out of my Ipods..
PLEASE do advise!!
I want it all, games!!! hacks, other OS's whatever.. just somebody school me!!
THANK YOU!!!

Click here for information.
(30988)

How do I get the most out of my battery?

Hello all,
I bought a MacBook Pro around 3/4 weeks ago, and I was just wondering how I should treat my battery to get the most use out of it. Should I use the computer until it needs charged? Should I leave it on the charger when I'm using it? Should I let it get below a certain percentage before I charge it?
I'm just looking for some tips because prior to purchasing a Mac I had a HP Laptop. I really ran down the battery on it because I left it plugged in too often.
Any info or suggestions are greatly appreciated!
Thanks,
Andrew

exactly as Csound1 says.
keep it plugged in when you're close to a power outlet - but don't leave it plugged in 7 days a week....
once in a while, use under it's own power and charge it back up when it's down to 75% to keep your battery in optimal condition.
once every couple of months, use under it's own power and charge it back up when it's down to 35%.....
do not constantly discharge your battery to 0% - will shorten the life of your battery.
good luck

Getting the most out of SD

I recently bought DSP on ebay. I use FCE to make films for various functions to be played on any standard DVD players. My intention was to be able squeeze a little more quality out of the film rather than having iDVD massacre it at the end of my work flow.
I know the SD export is limited to 720x480, but Im not really sure this really much better than idvd. Does any one have any tips on how to get the most from SD?
(For my work, using SD-DVD is absolutely necessary. Pls no suggestions about getting with the times, hooking up my laptop, or buying a ps3 )

There are 3 things which go into a good encode:
1. The quality of your source is the most important. Lighting, format, color correcton all affect your final output. DV for example is a great codec for home videos and such but would rarely be used in a profesional enviroment (or shouldn't) these days. Its highly compressed so when you compress it again to MPEG2 you notice artifacts.
2. The Encoder itself. DVDSP isn't an encoder, its an authoring tool only. Yes it will encode your .mov file automatically but this uses the same encoding engine as iDVD so you will not get better quality with your DVDSP purchase unless you have Compressor or another third party encoder, such as BitVice. A good encoder can cost $70k.
3. Knowledge is super important. Get online and read up on MPEG 2 technology. Understand bitrates, GOP structures, how audio formats effect bitrates ect. Encoding is just trial and error until you can look at some footage, know the length and immediately decide how you will tackle the job. Its an artform really.
So to answer your question you will need to answer these 3 three questions for yourself based on the budget and how far you are willing to go with alll this. No way you should expect to buy a copy of DVDSP off eBay (which automatically makes it an outdated tool) and expect it to improve your end results.
I love your question because I find it shocking how many talented producers, shooters and editors seem to treat DVD authoring and encoding as some kind of afterthought. In a way its the most important part of the process since everything can fall apart once a client takes a look at their poorly encoded footage they paid for
Message was edited by: Eric Pautsch1
Message was edited by: Eric Pautsch1

Getting the most out of my dual core cpu

hi all, i have written an app which loops through a for loop within a for loop to send out tasks
i.e.
for( int i = 0; i < train.length; i++)
//load training file
for( int j = 0; j < test.length; j++ )
//load testing file
//train vs test
now that i have purchased aintel dual core e6600, what should i do to make the most out of it, system monitor currently tells me that one cpu is maxed out nad say 10% of the second cpu is in use so basically one cpu is idle, i would much rather be doing two of these tests at once, one by each cpu...i was thinking of making the tarin vs test part a thread and just keep calling start, but i am worried that as once the start has been made, another will be started and so on...and i dont want hundreds waiting to go as i ahve millions of these tests to do and i wont be able to hold it all in memory so i only want two running at a time, can anyone please help by offering some suggestions
thanks
Danny =)

i dont think you can control this from java.
Chances are that there is either a java version for that CPU + OS, in which case the JVM knowns what it is running on and how to make the system calls to manage the CPUs it uses. I really have 'doubt' that this is the case.
Most likely the JVM knows nothing about the dual core and the OS takes care of it, and even more likely the OS doesnt know anything about dual core and the hardware takes care of it.
i would think that its done mostly in hardware and a little bit on the OS level. I dont think applications should care about schedueling and let the OS/HW take care of that.

Getting the most out of my macbook

Hi I have recently given my old macbook to my nephew and I want to make sure it's etting the most out of it as it can - It's a 2 ghz Intel Core Duo and is running Leopard 10.5.8 - I can't remember when I originally bourght it but it was probably before 2009 - can I upgrade the OS further?

According to this site you can go up to 10.6.8.
http://www.everymac.com/systems/apple/macbook_pro/specs/macbook_pro_2.0.html

Getting the most out of Aperture and FCP

Similar Messages

Maybe you are looking for