Getting the responses to be dated

Where do I go to get my responses dated? ie the first column in the response area.

Hi,
Is it possible that you hid the column that contain the time a response was submitted? To check if that's the case, follow these steps:
1. Click on the column letter to show the column pop-up menu
2. If the "Unhide" menu item is not disabled, click it to expand the list of hidden columns (see screenshot below)
3. If the Time Submitted column is in the list of hidden columns, click the menu item to unhide it
Regards,
Brian

Similar Messages

Adobe Creative Cloud connectivity issue on Websense run network; Failed to send the request to server to get the response - 12002

Hi all,
I am able to install the Windows Adobe Creative Cloud application fine on Windows 7 box but the application fails to establish a connection with Adobe server/-s.
We use a proxy with Websense as our network security solution. Proxy configuration script is set in Internet Options. We have not tried to whitelist anything as per http://helpx.adobe.com/creative-cloud/kb/proxy-authentication-support-creative-cloud.html as the errors suggest the application does not even connect to the proxy server/Websense at all.
Please see below snippet from that DLM.log file that contains the error messages - please have a look. Could anybody tell me what it means or advise how to resolve this please? I don't see the Adobe Creative Cloud tool to have any options where manual proxy settings can be setup to try that.
<snip>
11/05/14 08:50:48:184 | [INFO] | | | | | | | 5236 | **File download complete.**
11/05/14 08:50:52:145 | [INFO] | | | | | | | 3732 | **File download complete.**
11/05/14 08:51:05:327 | [INFO] | | | | | | | 1784 | **File download complete.**
11/05/14 08:51:06:968 | [ERROR] | | | | | | | 3452 | The windows error code is - 12002
11/05/14 08:51:06:968 | [ERROR] | | | | | | | 3452 | Failed to send the request to server to get the response - 12002
11/05/14 08:51:06:968 | [ERROR] | | | | | | | 3452 | the download job (0) failed to execute. The job state is STOPPED_STATE
11/05/14 08:51:06:992 | [INFO] | | | | | | | 6844 | some intermittent error. Retrying now. Error code is 12002 and error type is -45
11/05/14 08:51:11:514 | [INFO] | | | | | | | 6844 | incrementing the thread. now the active thread count is 2
11/05/14 08:51:12:519 | [INFO] | | | | | | | 6648 | **File download complete.**
11/05/14 08:51:16:541 | [INFO] | | | | | | | 6844 | decrementing the thread count. now the active thread count is 1
11/05/14 08:51:22:281 | [INFO] | | | | | | | 3452 | resetting intermitent error 9 from to 1 to 0
11/05/14 08:51:29:022 | [INFO] | | | | | | | 1836 | **File download complete.**
11/05/14 08:52:22:381 | [INFO] | | | | | | | 7220 | incrementing the thread. now the active thread count is 2
11/05/14 08:52:26:971 | [ERROR] | | | | | | | 6756 | The windows error code is - 12002
11/05/14 08:52:26:971 | [ERROR] | | | | | | | 6756 | Failed to send the request to server to get the response - 12002
11/05/14 08:52:26:971 | [ERROR] | | | | | | | 6756 | the download job (5) failed to execute. The job state is STOPPED_STATE
11/05/14 08:52:27:383 | [INFO] | | | | | | | 7220 | some intermittent error. Retrying now. Error code is 12002 and error type is -45
11/05/14 08:52:27:663 | [INFO] | | | | | | | 4908 | resetting intermitent error 9 from to 1 to 0
11/05/14 08:52:28:733 | [INFO] | | | | | | | 6064 | **File download complete.**
11/05/14 08:52:42:810 | [INFO] | | | | | | | 7220 | **File download complete.**
11/05/14 08:52:45:570 | [INFO] | | | | | | | 3788 | **File download complete.**
</snip>
There is also an INFO class message that talks about resetting an ‘error 9’ from 1 to 0.

Hi all,
I am able to install the Windows Adobe Creative Cloud application fine on Windows 7 box but the application fails to establish a connection with Adobe server/-s.
We use a proxy with Websense as our network security solution. Proxy configuration script is set in Internet Options. We have not tried to whitelist anything as per http://helpx.adobe.com/creative-cloud/kb/proxy-authentication-support-creative-cloud.html as the errors suggest the application does not even connect to the proxy server/Websense at all.
Please see below snippet from that DLM.log file that contains the error messages - please have a look. Could anybody tell me what it means or advise how to resolve this please? I don't see the Adobe Creative Cloud tool to have any options where manual proxy settings can be setup to try that.
<snip>
11/05/14 08:50:48:184 | [INFO] | | | | | | | 5236 | **File download complete.**
11/05/14 08:50:52:145 | [INFO] | | | | | | | 3732 | **File download complete.**
11/05/14 08:51:05:327 | [INFO] | | | | | | | 1784 | **File download complete.**
11/05/14 08:51:06:968 | [ERROR] | | | | | | | 3452 | The windows error code is - 12002
11/05/14 08:51:06:968 | [ERROR] | | | | | | | 3452 | Failed to send the request to server to get the response - 12002
11/05/14 08:51:06:968 | [ERROR] | | | | | | | 3452 | the download job (0) failed to execute. The job state is STOPPED_STATE
11/05/14 08:51:06:992 | [INFO] | | | | | | | 6844 | some intermittent error. Retrying now. Error code is 12002 and error type is -45
11/05/14 08:51:11:514 | [INFO] | | | | | | | 6844 | incrementing the thread. now the active thread count is 2
11/05/14 08:51:12:519 | [INFO] | | | | | | | 6648 | **File download complete.**
11/05/14 08:51:16:541 | [INFO] | | | | | | | 6844 | decrementing the thread count. now the active thread count is 1
11/05/14 08:51:22:281 | [INFO] | | | | | | | 3452 | resetting intermitent error 9 from to 1 to 0
11/05/14 08:51:29:022 | [INFO] | | | | | | | 1836 | **File download complete.**
11/05/14 08:52:22:381 | [INFO] | | | | | | | 7220 | incrementing the thread. now the active thread count is 2
11/05/14 08:52:26:971 | [ERROR] | | | | | | | 6756 | The windows error code is - 12002
11/05/14 08:52:26:971 | [ERROR] | | | | | | | 6756 | Failed to send the request to server to get the response - 12002
11/05/14 08:52:26:971 | [ERROR] | | | | | | | 6756 | the download job (5) failed to execute. The job state is STOPPED_STATE
11/05/14 08:52:27:383 | [INFO] | | | | | | | 7220 | some intermittent error. Retrying now. Error code is 12002 and error type is -45
11/05/14 08:52:27:663 | [INFO] | | | | | | | 4908 | resetting intermitent error 9 from to 1 to 0
11/05/14 08:52:28:733 | [INFO] | | | | | | | 6064 | **File download complete.**
11/05/14 08:52:42:810 | [INFO] | | | | | | | 7220 | **File download complete.**
11/05/14 08:52:45:570 | [INFO] | | | | | | | 3788 | **File download complete.**
</snip>
There is also an INFO class message that talks about resetting an ‘error 9’ from 1 to 0.

Unable to get the response from dynamic partnerlink

Hi
I used dynamic partnerlink, in this i am able to invoke the services dynamcially but i am unable to get the response from the services which i had invoked dynamically. In my dynamic partnerlink wsdl i had included callback binding and call back service in the wsdl you can see them below
<binding name="LoanServiceCallbackBinding" type="tns:LoanServiceCallback">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="onResult">
<soap:operation soapAction="onResult" style="document"/>
<input>
<soap:header message="tns:RelatesToHeader" part="RelatesTo" use="literal" required="false"/>
<soap:body use="literal"/>
</input>
</operation>
</binding>
<service name="LoanServiceCallbackService">
<port name="LoanServiceCallbackPort" binding="tns:LoanServiceCallbackBinding">
<soap:address location="http://openuri.org"/>
</port>
</service>
please help me on this
thanks
Srikanth

Hi, thanks for the input
Actually My partnerLink had two messageTypes one for Input message request and the other for the Output message request and for the input message i had used the operation as initiate also for the output messsage type operation as result.For both of them binding is defined.
With these am passing the values from myBPELl to the service which am nvoking dynamically but unable to capture the response the variables are local to myBPEL.

How to get the Response Code when a URL is launched from Web Dynpro

Hello Experts,
I have a Web Dynpro Application in which in one of its views i have an IFrame UI element in which i will show a resource stored somewhere ..
But before showing it i want to check if the resource actually exists. For this i have to check the HTTP Response code from Web Dynpro Application without setting it in the Iframe..
I am using the following code to get the Response Code:
try{
URL url = new URL("Some Url");
HttpURLConnection.setFollowRedirects(false);
HttpURLConnection connection = (HttpURLConnection) url.openConnection();
connection.connect();
wdComponentAPI.getMessageManager().reportSuccess("Response code ="+connection.getResponseCode());
}catch(Exception e){
wdComponentAPI.getMessageManager().reportSuccess("Exception");
Now the Problem is whatever response Code occurs 403 (for No Proper Authorization), 404 (for Resource not found) etc..
i always get Response Code= 500 (which is for Internal Server Error) shown in the messgae i have printed.
Please let me know the correct way of getting the Response Code from Web Dynpro.
Also my resource is lying on a SAP Portal 6.4
Best Regards
Sundeep
Edited by: Sundeep Sethi on Feb 18, 2008 9:07 AM
Edited by: Sundeep Sethi on Feb 18, 2008 10:23 AM

Hi,
Check this code from /thread/5242768 [original link is broken] if it works.
try{
URL myurl = new URL("http://calendar.google.com");
URLConnection connection = myurl.openConnection();
if(connection instanceof HttpURLConnection) {
HttpURLConnection httpConnection = (HttpURLConnection) connection;
HttpURLConnection.setFollowRedirects(true);
httpConnection.setRequestMethod("HEAD");
httpConnection.connect();
System.out.println("Response = "+httpConnection.getResponseCode());
catch(Exception e) {
// print exception
Regards,
Harini S

Getting the response in a single file

Dear friends,
I need a clarriffcation, i am getting the response from rfc for my scenario file-xi-rfc(synchronous). And the result was stored in the ftp folder as a file.Now my issue is my source file having more than one sales order detials so the bappi is triggerd more than once and a result file is created for every sale order created. but i need a single file only to created having all the details of the created sale order. Please tell me how can i hold all the values together and write it at once in a single file. I have tried in sdn but i couldnot get the relevant answer.note i need to perform the same with out bpm.
Thanks and Regards
Karthikeyan

That should be possible using RFC mapping lookups, which is explained in detail in https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a03e7b02-eea4-2910-089f-8214c6d1b439

IDoc to webservice and get the response back into another IDoc.

Hi guys
We have a scenario where we need to send an IDoc to webservice and get the response back into another IDoc.
Questions:
1. Is this scenario possible without a BPM? or do we need to use BPM (Sync-Async bridge).
2. Is there a Async to Sync bridge in BPM?
3. How do I use this bridge in my scenario and customize it?
4. If not possible, provide me the related docs using BPM for the same scenario.
Appreciate your quick response
Regards
Naidu

Hi,
this link may help u............,
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1134. [original link is broken] [original link is broken] [original link is broken]
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403. [original link is broken] [original link is broken] [original link is broken]
Regards,
Azeez khan.

When I sign in on my windows pc I get the response server error. What do I do?

When I sign in on my windows pc to I cloud I get the response -- server error. What do I do?

Spoke to Apple their answer which worked was to set up a new user log. in control panel user new log shut down log in to that new account re-set up i cloud it worked for me thomasg

How do I send a group text and not have everyone else get the responses

How do I send a group text and not have everyone else get the responses? Thx

Whether or not everyone gets the response depends solely on the person responding. i.e. you send a group text and i am one of the reciepients. From here i have two options, reply to the group text (everyone gets my reply) or i could text just you on the side (by opeining a new window in messages with just you as the reciepient) and replying to just you. Theres nothing you can do, its up to the person replying whether or not they reply to the entire group or just you seperately.

JMS to WebService - how to get the response?!

Well i am receiving data from JMS-CC and sending it to WebService. But there is no response?! Do i have to use the Synch/Asynch bridge because we are on SP12?!
And if i want to get the response to SOAP-Sender-CC - how do the URL has to look like and how do i implement the URL in the sending WSDL?!
br
Message was edited by:
Carsten Heinrich

you can try to use async-sync bridge
http://help.sap.com/saphelp_nw70/helpdata/en/45/20d251c20a0732e10000000a155369/frameset.htm
Florin

How can I get the responsibility for concurrent programs

Guys,
How can I get the responsibility for a list of concurrent programs. Is there a query that I can run to get the results?
Thanks in advance,

Refer to Note: 134036.1 - WHOCANRUN.SQL - List Responsibilities That Can Run a Given Concurrent Program
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=134036.1
From the output of the query in the note referenced above, you can run "Users of a Responsibility" concurrent program then to find out the list of users who have access to a certain responsibility.

Trying to connect to a known internet connection but i keep getting the response "unable to join network"

Trying to connect to a known internet connection but I keep getting the response "Unable to join network" and the internet is connected, please help.

Okay now this description was pretty vague but it could be a few things. First thing to try. Turn wifi off and then one again and try to connect. If this fails read on.
The second step is to select that network in the wifi settings so you get an expanded menu of it. Follow these steps from the home menu on your ipad... SETTINGS>Wi-FI>NETWORK NAME (you have to click the little blue arrow)> FORGET THIS NETWORK. Then turn wifi off and then on. Then try to connect again. If this fails... well read on,
Okay, so now you really know it's most likely not your ipad, so go on down to your wifi router and turn it off, wait ten seconds, turn it on again. WITH YOUR IPAD OFF. Then turn on your ipad on and then try to connect again. If this fails... Then you'll have to do some more complex things. You could try setting up the network again. IF that fails too. Leave some details about your router, brand, year etc... And I'll try to let you know what else it could be.

I have an Iphone 3gs. I can't get it to sync. Every time I try I get the response 'waiting for changes to be applied'. I've tried doing a reset but it still won't sync. Any ideas?

I have an Iphone 3GS. I can't get it to sync. Every time I try I get the response 'waiting for changes to be applied'. I do not have voice memos. Any suggestions?

This is a user forum, not a channel to address Adobe. As your fellow users and volunteers, we'll be happy to help you if we can.
You can download the CS6 trial version just like anybody else.
Once you download it, you can install it, input your serial number, register it and apply all necessary updates.
An alternative, if you know how to access your Adobe account, under My Products you'll find your Photoshop CS6 registration, next to which you should find a link to download CS6 if you originally bought it as a download

Get the response instead of loading it in the browser

HI.
I would like to make a little program that would read the response of a request to a web page. I'm cant find how to do it. Everything i can foud call's the URL but loads th result in the initial browser window.
Heres what I want :
1- A friend as a servlet on a web site that does some maths with initial numbers intered in the window.
2- I would like to make another servlet that would send some numbers to my friends servlet on the url(GET method).
3- The all purpose is to be able to send a series of request on is servlet from a little list of numbers.
I would appreciate any inputs. I've looked thru the javax.servlet.http librairis and java.net.
Thanks for helping me.

You don't need a servlet, an ordinary jaav program can do this. Have a look at the java.net package in the JDK docs. Something (totally untested!) like this should work;
URL url = new URL("http://www.friendssite.com/friendsServlet?par1=val1&par2=val2&par3=val3");
//par and val are as required by your friends serlet
HttpURLConnection conn = (HttpURLConnection)url.openConnection();
con.setRequestMethod("GET");
conn.connect();
InputStream in = conn.getInputStream();
//Now you can read the results from the InputStream
HH

9ias report server --could not get the response

i could not run reports server on linux 6.2.
it works like this ---- web site found, waiting for reply
then i get no response.
have anybody got answer for that????
plz help
i detailed configuration procedure (incuding patches etc)
will be much helpful.
thanks in advance
smaran
[email protected]

It's still not working even if I export for ORACLE_HOME
Red hat version : 2.6.9-5ELsmp
[oracle@appli bin]$ ./rwdiag.sh -findall
Environment:Environment java.lang.UnsatisfiedLinkError: /u01/app/oracle/mdw/lib/ librwu.so: /usr/X11R6/lib/libXm.so.2: undefined symbol: _Xsetlocale
Environment:getEnvironmentStrings java.lang.UnsatisfiedLinkError: /u01/app/oracl e/mdw/lib/librwu.so: /usr/X11R6/lib/libXm.so.2: undefined symbol: _Xsetlocale
java.lang.reflect.InvocationTargetException
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
Broadcast mechanism used to locate servers
Channel address = 228.5.6.7
Channel port = 14021
REP-50503 No server found in the network

How to get the response of a vbscript ran from extended js?

Hi All,
I want to get the result from a vbscript, how to get that in my jsx? This is what I'm doing-
vbscript (this will return me something, i've added just a sample string)
Wscript.Echo "Like this?"
jsx
var a = File("C:\\Users\\Sahil\\AppData\\Roaming\\CreativeWorx\\1.vbs");
var b=a.execute();
Now, variable b returns me true/false; and the output i.e. "Like this?" is alerted! So my question is-
1. How to get the output in a variable?
2. How to avoid the alert
So, I simply wish to get the output from my vbscript and then perform certain functions accordingly, alos, I dont want this to be alerted!
Any help will be highly appreciated!

The capitalization is app.doScript and not app.doscript that is if you are trying to get a jsx script to run and access a string from from a vbs script.
When defining the VBscript for multiline scripts the easiest method is to use triple quotes
VBscript = """dim WMI: set WMI = GetObject("winmgmts:\\.\root\cimv2")
dim Nads: set Nads = WMI.ExecQuery("Select * from Win32_NetworkAdapter where physicaladapter=true")
dim nad
for each Nad in Nads
if not isnull(Nad.MACAddress) then Wscript.Echo Nad.description, Nad.MACAddress
next"""
when using the scriptArgs you can either make a loop of them and send the string value of each one something like this
For (n = 0 .........
myArg = "myArg" & n
myStringToPassOver = "Shaddow Fax " & n
app.scriptArgs.SetValue myArg, myStringToPassOver
Next
or probably better to make a long comma or something else separated string and pass it over after the loop
var VBScript = """myArg = ""
For n = 0 To 15
myArg = myArg & "Shaddow Fax " & n & ","
Next
app.scriptArgs.SetValue "myResult", myArg
app.doScript(VBScript, ScriptLanguage.visualBasic);
var myResult = app.scriptArgs.getValue("myResult").replace(/\,$/,"").split(",");
// if neaded use "replace" to remove final "," and "split" to convert into an array
alert(myResult.join("\r")); // alert the array
The above script is a jsx script that runs a vbs
If you want a vbs script to run and access a string from from a jsx script then you would use xxx.DoScript see the sample from the manual below.
Set myInDesign = CreateObject("InDesign.Application")
myJavaScript = "alert(""First argument: "" + arguments[0] + ""\rSecond argument: "" +
arguments[1]);"
myInDesign.DoScript myJavaScript, idScriptLanguage.idJavascript, Array("Hello from
DoScript", "Your message here.")
myVBScript = "msgbox arguments(1), vbOKOnly, ""First argument: "" & arguments(0)"
myInDesign.DoScript myVBScript, idScriptLanguage.idVisualBasic, Array("Hello from
DoScript", "Your message here.")
P.s.Please mark the question as answered, thanks

Getting the responses to be dated

Similar Messages

Maybe you are looking for