Getting the smart board to work with the iPad mini

I currently only have access to a mini for personally and for the classroom. I used to have access to an iPad 2. Now they both could have the smart software and I use a smart board regularly. However when I plug the mini into the board using the lightning to VGA it tells me hardware not supported. Now how am I supposed to use the software that is supported if the mini can not plug into the smart board itself?  Several other educators tell me the mini is supposed to work with it so we are now confused. Is my device glitches? I've take it to the store but because  the stores do not have smart boards on the premises to test with the device they an not solve.  Is there anyone else aware of this issue that has found a solve?

Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
 Cheers, Tom

Similar Messages

  • Will the 10W Apple Charger work with my iPad Mini

    Hello Everyone
    I got a ipad mini for christmas and because the lightening cable and 5W charger don't reach because i have only got one socket accesible in my living room i was thinking about buying the 10W Charger from Western Computers in Cheltnam, Gloucestershire And I Have a few questions about it because it does not tell me on the website which devices it is compatible with my following questions are
    Will It work with my ipad mini?
    Will it charge my iPad Mini Quicker?
    Will it be compatible with the lightening cable my ipad comes with or will i have to get a adapter of some sort?
    Please can someone answer my questions and reply because i do not want to wast my £25.00

    The 10W charger will work on all of Apple's iDevices. It will charge your Mini faster.
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • How do I get my Jawbone Era to work with my Ipad 2

    How do I get my Jawbone Era to work with my Ipad 2?  The Ipad shows the Jawbone as synced, however, when I play a video it does not play through the Jawbone, only the Ipad speaker.

    You need to pair the iPad with the bluetooth keyboard. I don't understand how you could have used it even once without doing this process (unless whoever sold the iPad and keyboard to you did this for you?) but perhaps it has somehow become unpaired. There should be instructions with the bluetooth keyboard on how to pair it with an iOS device like your iPad, but the general process is pretty straightforward as described here:
    iOS: Third-party Bluetooth accessories
    If you can't find the pairing instructions/user guide that came with the keyboard then look on the manufacturer's website, they'll almost certainly have downloadable User Guides containing the info on pairing.

  • I want to store movies on an SD disk, watch them on the way to Europe, then use the chip to record photos in my camera.  I can't get the iPad mini to recognize the videos I've recorded.

    I want to store movies on an SD disk, watch them on the way to Europe, then use the chip to record photos in my camera.  I can't get the iPad mini to recognize the videos I've recorded.

    I'm a bit lost - you first say
    "The only file(s) I can sometimes get it to recognize are the ones shot with a camera onto an SD card"
    then you say
    " If I take an unused SD card and record video with my camera, it will see, and import the file to the Photo app."
    In the first statement, aren't you using an SD card in the camera?  And what do you mean by "unused SD card"?    Cameras put their files in specific folders on a card, and your device only reads photos and video from those folders, not from anywhere else on the card.

  • Hi, please can you tell me when the ipad mini 2 is coming out? i don't know whether to get the ipad mini, or wait for the 2nd generation

    hi, please can you tell me when the ipad mini 2 is coming out? i don't know whether to get the ipad mini, or wait for the 2nd generation

    Oh, ok. thanks for the help anyway

  • HT5457 would i be better off getting the ipad mini or the ipad 2 upgraded to ios6

    I want an IPAD that is fast and good for education, so I want to know if getting the IPAD mini is better then getting the IPAD 2 upgraded to IOS6 ,and witch one would I be better off getting.

    The iPad mini is basically a smaller iPad 2. However, there are a few differences.
    Compare iPad Specs http://www.apple.com/ipad/compare/
     Cheers, Tom

  • I have an ipad mini but my griffin stylus doesnot respond well with it can you suggest me a stylus that will work with my ipad mini please.

    Hi ,
       I used to have an iPad 2 and i used a Griffin stylus with it and it worked fine on it, i used it to take notes on the iPad. But now i have an iPad mini and the stylus doesnot respond well on it , i have to really press hard to get it to work. Please,can anyone suggest me a stylus that will work well on iPad mini without having to press so hard and will respond smoothly.
    Thanks

    Is this a serious reply?

  • Will Logic Remote work with an iPad Mini ?

    Will it work on an iPad mini even tho it's smaller ?

    Hi Mate, yes it's fine with the mini (and iPad 2 onwards), the interface has plenty of room so is great to use too.

  • Hi I have a Lexmark all in one printer how do I get it to work with my ipad mini

    Hi I have a Lexmark all in one printer how do I  get it to work  with my  mini ipad

    It depends upon the model. It's wifi-enabled ? And is it listed on this page as supporting AirPrint : http://support.apple.com/kb/HT4356 ?
    If not then do Lexmark have their own app in your country's store that supports that model ? If they don't then there are a number of third-party printer apps such as Print n Share and PrintCentral Pro which might work with it.

  • Why does a USB stick not work with my ipad mini

    I bought an IPad mini and got an adapter to hookup a USB stick, but no matter what stick Zi put in the connection I get the same error message. " cannot use device the device requires too much power".

    YOu can only download from cameras, SD cards and certain flash drives (i've had a 50/50 success rate when I've played around, with no consistent size or brand that always worked). The only formate it'll see are photos and videos and even those must follow a very strict naming convention.
    There is zero support to transfer documents, music or any other kind of files to the iPad. As well as zero support for exporting anything off the iPad.
    If you want to share your pictures, try uploading them to something like flicker or other online services.

  • Trying to get a Wasp 800 to work with an iPad 2

    Good Morning All,
    Recently, my department has purchased a few iPad 2's, and we'd like to use a bluetooth scanner.  One of our guys purchased a Wasp 800 thinking it would work because it's bluetooth.  I tried it and called customer support twice this morning and didn't have any luck.  I was curious if anyone here had any insight on this issue.
    http://www.waspbarcode.com/scanners/cordless_barcode_scanner.asp

    Just out of curiosity, read the wasp manual, and see what the bt protocols it uses are, then look at the specs for the pad3 and see if they are in the new one.  Or, better yet, take you wasp down to the apple store next week, and try it there, see if it connects. 
    Won't help your issue with the current 2s, but would at least give you a hint about future purchases.
    There were some older threads along the same lines, and while I cannot find it, someone did get a connect using a wired via the cck to the pad.
    You may just have bought the wrong scanner.  See the link below.
    http://barcodeguy.com/iPad_Bluetooth_Barcode_Scanner.html

  • Will a samson meteor mic work with my ipad mini?

    I've hooked it up but no recognition or power. is it a co9nnection issue?

    I've hooked it up but no recognition or power. is it a co9nnection issue?

  • How do I know if the iPad mini has the retina display, before buying it, by the box it comes in?

    I was recently trying to buy an iPad Mini with retina display but the box it was in did not say anything about whether it had the retina display. Also the price they were going to charge me was $299 and not the $399 of the Mini with retina display. So how do I know by looking at the box if the Ipad Mini in the box has the retina display?

    By this;
    The model number on the back cover is:
    A1489 on the iPad mini with Retina display Wi-Fi
    A1490 on the iPad mini with Retina display Wi-Fi + Cellular"
    do you mean on the back cover of the box or the iPad itself. If it is only on the back side of the iPad itself, then I wont know if I have actually purchased the iPad Mini with retina display until I have opened the box. To me this is unacceptable as it creates a huge hassle if my intent was to buy thr iPad Mini with retina display but was actually sold the iPad Mini without retina display. When I return it for eith the right iPad mini or my money back, certain retailers have a habit of treating such people like criminals even when it was the retailers mistake. The box should be clearly maked to indicate which iPad mini in contains so the purchaser does not have to feel like they're playing roulette.
    Today I was trying to buy the iPad Mini with retina display and made it very clear to those working at this retailer that was my intent. This paricular retailer has you talk to their sales people on the floor and they give you a print out of the item you are purchasing. Then the customer takes it to the cahier who takes to the stockroom and brings it back to the customer. I asked the cashier if it was indeed the iPad Mini with retina display and they said yes. So I asked how can you tell by the box? The cashier told me all the boxes look like this one. I said to them, if it is the iPad Mini with retina display whay is it priced $299 like the original iPad Mini without retina display? I walked out without buying it. Some poeple may have thought oh good I'm getting the iPad Mini with retina display for the price of the iPad mini without retina display when in fact they be only getting the original iPad mini without retina display.
    Your response helped me but it does not solve the problem as far as I am concerned of being able to tell what iPad Mini is in the box simply by what is on the outside of the box. You may say, what difference does it make? My response is, not all retailers are scrupulous!

  • Can you add 3g to the ipad mini later if you purchase the non cellular model?

    I am interested in buying an ipad mini but I'm not sure whether to get the ipad mini with cellular data. So does anyone know if I can add the 3g later to the ipad mini if I purchase the non cellular model?
    Thanks,
    Emily x

    No you can't, and the ipad mini is 4g LTE. It doesn't come with the hardware to enable cellular if you don't buy one with cellular

  • Only one of my earbuds on my bose headphones works with my ipad, iphone and macbook- if I hold them there the right earbud will work, but for the life of me, I can't get them to both work. Why is this? And is Apple doing anything about this?

    Only one of my earbuds on my bose headphones works with my ipad, iphone and macbook- if I hold them there the right earbud will work, but for the life of me, I can't get them to both work. Why is this? And is Apple doing anything about this? While Apple's headphones have (finally) admittedly gotten better of late, I still prefer the much more comfortable headphones & sound quality that Bose makes and that I spent the money for.

    Bose Product Support

Maybe you are looking for

  • Remove Standby/Read only mode for a database in sql server 2005

    Hi,       I have a problem in sql sever . my database is showing standby/read-only mode. i want to remove that mode.please help me for the issue.

  • About   Attachment  display

    hello everyone! my English is very poor ! I receive one E-mail no Attachment ,but in mailboby is begin 666 batch/04665735.xls M/&AT;6P@>&UL;G,Z;STB=7)N.G-C:&5M87,M;6EC<F]S;V9T+6-O;3IO9F9I M8V4Z;V9F:6-E(@T*>&UL;G,Z>#TB=7)N.G-C:&5M87,M;6EC<F]S;V9T+6-O

  • Navigation buttons missing from BSP iView

    Hello, We have a BSP iView that we are displaying in our Portal (EP7).  ISSUE: The Back and Forward buttons are not displayed. When we access this BSP application directly from browser, both buttons are visible!  (These buttons are located in the Top

  • Log and transfer crashes when converting to 422 from avchd from sony fs700

    trying to import AVChd files shot on a Sony FS700. the files are on average one hour or more. Need to import as 422 HQ log and transfer sees the files but FCP 7 crashes every time I've tried using PavTube to convert but files over 10 minutes are segm

  • Windows partition randomly gone, cannot boot into it.

    Some Background: I installed Windows 7 on my iMac (iMac12,1) under OS X 10.7.2, then I re-installed a 64 bit version of Win7 later. I've been using mostly Win7 for stuff, switching back to OS X (upgraded to 10.8.2) every now and then. Today, I was ju