Getting this erro "*** Developer Tools: Reading sites for user: fwadmin returned status: Forbidden"
hi,
After intrgrating with Webcenter site with EClipse using CSDT plugin. When i tries to create a template using eclipse IDE. And when i click on 'Create New Template' icon on eclipse , I am getting error "*** Developer Tools: Reading sites for user: fwadmin returned status: Forbidden"
Thanks,
Kumar
Hello,
Check if your user has correct permission or not.
User must of part of RestAdmin group. Read here- http://docs.oracle.com/cd/E29542_01/doc.1111/e29634/dt_quickstart.htm#WBCSD942
Regards,
Guddu
Similar Messages
-
I asked this question before and performance is somewhat better but still at least three times a day I have to restart my computer just to get FF to run. It starts fine first time. If I let my computer go to Screen Saver, when I get back, pages will not load. When I close FF I get a message that FF is still running. When I chose Close FF I get the message in the question. Every single day. I like FF but will switch to Chrome if I have to restart my computer three times a day just to use FF. Very frustrating.
Tried all that. Totally uninstalled FF. Reinstalled fresh copy. Had to get my bookmarks, add ons, etc. loaded back on. Was very hopeful. Twenty minutes after walking away from my computer the same damn thing happened for the umpteenth time. Nothing would load. When I closed FF and tried to restart I get a message that FF is already running. Close button and Task Manager were of no help. Then get the "profile inaccessible" error message. I give up. While I like the FF interface, I need a browser that doesn't force me to restart my computer every time I'm gone for twenty minutes. Reluctantly going to Chrome. Thanks for your efforts. Maybe someday FF will make a browser that actually works on my computer. Very frustrated user here.
-
I get this message, "can not read because it was created by a newer version" I restored twice at different dates and uninstalled all apple stuff and reinstaled it again. Still nothing Help John
That message is usually a sign that you tried to roll back to an earlier build of iTunes, but occasionally I've seen it connected to a new upgrade. This technique should fix things.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
HELP! Where do I get the software development kit 1.3 for windows 98?
HELP! Where do I get the software development kit 1.3 for windows 98? I got this java book and it tells me "http://java.sun.com". I guess it expects me to find it myself. I aint no good at finding stuff on the internet. Can someone give me like the exact address to download it or something? (Also, it wants me to get the java software development kit installation instructions and documentation... I have no idea what all that stuff is, or where to find it. I'm completely lost... Can someone tell me where to get that stuff?)
Actually, the latest version is now jsdk 1.4.1
From java.sun.com, you can click on "Downloads" at the left
Then, you click on "java 2 platform, standard edition"
Then, you can click on "J2SE 1.4.1"
This leads to a page with the URL http://java.sun.com/j2se/1.4.1/download.html (you could use this URL wight now, in fact)
That page has a table.. look for the row entitled "Windows (all languages, including English)", and in the column headed "SDK", you'll see a link "DOWNLOAD". Click on it (make sure you click on the right one!)
You will then have to read the terms and conditions, and at the bottom, click the button labeled "ACCEPT"
This will show a page with a link "Download j2sdk-1_4_1-windows-i586.exe"
You click on that link, and the download will start. The file you are downloading is the installer for the J2sdk version 1.4.1
Hope that helps!!
Once you have downloaded it, you'll need to set it up. That's not very difficult, but if you need advice on that, I'll be watching this thread.
Yours, Mike H... -
When Creating Customer I get this ERROR "Provide a positive integer for minimum customer balance amount or percent when balance amount overdue type is amount or percent respectively."
I tried troubleshooting when I saw the another post and created with a new customer profile class, but still getting an error, though I created another profile like below and attached this to another existing customer it worked, but when I tried creating a new customer it is still giving me the error. I am Using Oracle Applications R12.1.1
Steps I followed in Creating a New customer Profile
==== Make sure the new Customer Profile class which you will create is in active state. Cross check below steps while defining a customer Profile class.. e.g. Name : DEFAULT (and it's active)
*1) Profile Class Tab :*
a) Balance FWD Billing : Not enabled
b) Invoicing --> Tax Printing ( Summarize By Tax Name), Grouping Rule (DEFAULT)
c) Set Terms as per ur requirement , do allow discount & Override terms
d) Set Dunning as per your requirement,
e) Filled in Collectors info as per your requirement with Credit Check enabled...
f) Receipt --> Auto cash Rule set as 'Standard'..
*2) Late Charge Profile* Set it as per requirement
*3) Profile Class Amounts* e.g Say Currency set as "USD"
a) Credit Limit : 100000
b) Order Credit Limit : 100000
c) Minimum Receipt Amount : 1.00
d) Min statement amount : 1.00
e) don't put any value in Exchange Rate type (e.g, monthly, Plan etc..)
f) Minimum Customer Balance : Amount ------> Value: 5.00
g) Minimum Invoice Balance : Amount ------> Value: 5.00
h) Minimum Charge per invoice : 1, Maximum Charge per Invoice : 100 Under Interest Charge
i) mention Type as Fixed Rate, Value : 10
j) You can avoid setting the Penalty Charge for the time being..
Step-2_ a) Open a customer ..*go to Bill to site details* --> Click on Profile Tab --> Under Profile Class field please include new profile class which is created by you (e.g DEFAULT) . b) Go to Profile Amounts Tab --> Click(Show) on Currency USD --> Verify the set up here as well I could see this.
When I tried creating an new Customer using the new profile, it's repeating the same error. Please help.Hi
You get this error when profile class amounts are not set for all the currency. Go back to your profile and ensure that the profile amounts are set for all the currencies found, whether you are using it or not.
Regards -
Why am I getting this message on my e-mail account: User account temporarily unavailable for system maintenance?
Is there a solution to this issue? I have an iPhone and an iPad that sync with Outlook using iTunes. Every now and then the contacts, calander and notes become unchecked for both the iPhone and iPad. When I recheck them and "Apply" I get this message: The information on the iPad is synced with another user account. Do you want to sync this iPad with the information from this user account?
As far as U know I have only one User Account. I see that many people have this issue. why isn't there a solution? -
i already did the Hidding part and later moved the events and projects to the FCP events and projects folder . I still cannot share - keep getting this message "THE SHARE OPERATION 1080P FOR APPLE DEVICES (10 MBPS) HAS FAILED. Quicktime Error -50
I dont know what else to do to be able to share my project - I know i updated FCPX before i shared this project but i dont know what im doing wrongmasterpieces wrote:
later moved the events and projects to the FCP events and projects folder .
Can you explain in detail what you did?
Do any other shsre destinations complete? If not, do you get the same error message? -
I upgraded to iOS x mavericks on my iMac now i cannot access my iPhoto i get this messageThis update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled. I have not changed anything thankyou for any info.
Please test after each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes. Keep in mind that no one here represents Apple or can help with customer-service issues.
Step 1
A purchased app can only be updated by signing in to the App Store with the same Apple ID that was originally used to buy it. There's no way around that limitation, which also applies to free apps. If you can't sign in with the buyer's ID, delete the app and reinstall it. You'll have to pay for it again, if applicable.
Step 2
If you get the alert when trying to update a bundled iLife app, elect the Purchases page in the App Store and locate the app in your purchase history. If there's a button marked ACCEPT on the right, click it.
If you have a used Mac, the bundled apps were linked to the original owner's Apple ID and can't be transferred to you. Reportedly, customer service has issued redemption codes to some second owners who asked, but it's not guaranteed.
Step 3
If you're trying to update iLife or iWork apps that were installed from a purchased DVD, or if you have a refurbished Mac bought directly from Apple, contact App Store customer service for a redemption code. You may be asked for the part number of the DVD.
Step 4
From the App Store menu bar, select
Store ▹ View My Account
Enter your Apple ID password at the prompt. At the lower right corner of the window that opens, click the Reset button. Close the window.
See also: remove app
Keywords: refunded canceled -
when trying to sync, I get this computer is no longer authorized for purchases on this iphone. I click on store-authorize this computer and get successful and still get the error. I tried deauthorizing and reauthorizing and keep getting this message. Help
the solution you propose is not helping . are there alternatives ?
I have Iphone 4 never had any problem , and withouth changing or modifying , this problem popped up out of the blue ....
Please HELP -
This erro i acreted apple id for assistance,contact
this erro i acreted apple id for assistance,contact
RaghadMimar wrote:
For assistance contact itunes support
Use this Link > Apple Support iTunes Store Contact -
Is there a Oracle site for user to practice Portal?
Hello,
Is there a Oracle site for user to practice Portal?
Thank you for your attention,
Emily123Not exactly, but you can do some of this at http://portalstudio.oracle.com like (testing your portlets). It might be a helpful resource for you too.
Portal is a rather easy setup too if you have a system with at least 1.5 GB of RAM where you can install the infrastructure & middle-tiers on a single system. But I'd still look at this site to see if it has resources that help you with your Portal development.
I hope this helps. -
How to make form field read only for users with certain permissions
We need to make two form fields read only for users with certain permissions. Kindly guide me on how to do this in Infopath. I searched and there is an option to disable to the column, but no option to select user permissions.
Please give your suggestion on this.
thanks.Hi,
See the link below:
http://info.akgroup.com/blog-0/bid/69277/InfoPath-Restrict-visibility-to-users-in-a-SharePoint-Group
Here you can add the fomatting action on the field to disable the field if those users belong to certain Sharepoint group (does not matter the permission levels though). Hope it helps.
Regards, Kapil ***Please mark answer as Helpful or Answered after consideration*** -
Help needed,
I am getting this message sandbox environment error no test user account, when downloading any application from iTunes, friend told me to sign out and sign in iTunes it might solve the problem , and i triyed it but still I cannot login I to my itune account. Same message keeping. Popping up, this problem started supricly today.Take a look at the instructions here.
http://www.technogal.net/2012/03/this-is-not-test-user-account-please.html -
How to Control authorization for users with certain status for level 2 WBS Element
Dear All,
Is there any standard way or enhancement available to control authorization for users with certain status for WBS Element i.e. for example
Pre-requisite:
There is only 2 level of project i.e.
Lev_ WBSE_______Description
1___ 7-14.E_______summay outage controller
2___ 7-14.E.2310__ Plant/unit # 2310
2___ 7-14.E.2310__ Plant/unit # 2220
Project Controller (authorization role assigned "Z_PS_OP7_OTGCON_C") have all project level authorization
Plant/Unit Controller (authorization role assigned "Z_PS_OP7_PLNTOTG_C_2310") have only level 2 authorization with enhancement that we did in system by Z table.
User ID_ Plant #
123345_ 2310
122455_ 2220
Issue:
After System Status released and User Status approved the WBS basic date for Plant/Units should be restricted from updating/changing by Plant/Unit Controller level and only project controller should have this authority.
Solution required:
Can any one tell how to control this scenario either by standard or enhancement available to control authorization
BR
Saqib UsmanHi,
Did you explore SAP Enhancement CNEX0002 Using Transaction CMOD?
Thank you and regards,
Varshal Kachole
The SCN Rules of Engagement -
Unable to get the row count of supplier site for each supplier
Hi,
In the sourcing module, suppliers page is having an advanced table in which there is a field 'supplier' and another filed 'supplier sites' (supplier field is of type picklist).Now, how can i get the count of 'supplier sites' for each supplier???Hi sumit,
Thanks for the reply, can u please help in writing the code to loop through the VO...
I was trying to get the first row and then finding the count of supplier sites, but in each iteration of for loop(for each row) i am getting the same count value for each and every row...
Code :
int j=vo.getrowcount();//count of no. of rows
for (int i=0;i<j;i++)
row=(xxVORowImpl)rowsetiterator.getRowAtRangeIndex(1);
int a=am.getSupplierSitesVO.getRowCount();//this is the view object in the pick list
oapagecontext.writeDiagnostics(this,"value of a is :"+a,1);
this code is giving row count of last row of supplier.
How to get the count for each and every row of supplier sites ?
Thanks.
Maybe you are looking for
-
How to schedule a job to run only in a time window
Hi, I need to schedule a job to run every day but sundays from 7am to 6pm. I managed to get it to start at seven like this FREQ=WEEKLY;BYDAY=TUE,WED,THU,FRI,SAT;BYHOUR=7;BYMINUTE=0;BYSECOND=0 how can I set the job to stop at 6pm? thanks in advance
-
Can I use same apple ID on two IPads? And how do I name new IPad..Thank you in advance for any help
Can I use same Apple ID on my old and my new IPad....and if so, how do I name the new iPad. want to keep games on one iPad and use the other for emails etc. Many thanks
-
Hi Gurus, My scenario is when the customer send mail attachment with Sales order PDF document. The vendor should download that pdf forms. In that pdf forms we have an submit and cancel button. Once i submit that button that data should store in the d
-
Is there a good place to get REAL support?
Im planning to buy Adobe Flash Builder. But Im seeing that it lacks totally in support and stuff. Is there anywhere else to get support?
-
Why is the unico engine for i686 only?
Does anybody know the reason? It's just a .so file so I assume it's quite easy (but not for me) to compile it from source.