Getting to Calendar day view
I like many things about ios7 but one of my most used behaviors no longer works. In The calendar app I want to make an appointment, say, t on the 25 of next March. Before, I would go in month mode to the date select a suitable day and touch the number of the day above the small display of my other appointments for that day. This would open up that day in day view and I would make the appointment. This no longer works. The day number in month view is inert (on the iPhone the month view gives you access to the day ok but not on the iPad).
Did more reasearch and this worked... guess it was fairly simple.
Pinch to Zoom in Day View
The next time you are viewing your calendar in the Day view, using two fingers, slide them together to zoom in, or slide them apart to zoom out.
Similar Messages
-
IOS 7 Calendar Day View does not show any all-day events ?
Hi,
I realize that iOS 7 Calendar Day View does not show any all-day events.
Is this a bug ?
Any help given is much appreciated.
Thanks and Regards.Mine brings me right up to the current time, or in the case of another day, it takes me to the first appointment of the day.
-
How to get the calendar days of last month in SAP HR Schema?
Hi all,
I have a question about the calendar days of last month, cause the customer calculated the salary not by natural month but cross-month, for example,
for calculating salary of Aug, the time period may be 7.28-8.27, so I need the days of this period which is the calendar days of last month exactly.
But I only knew GKSOLL was used for getting the calendar days of current month.
If any place wrong, please guide me.
Look forward to getting experts' help, thanks.
Regards,
May.Hi Sankarsan,
Thank you so much for your help.
The requirement I have described in detail when replying Viverk, you can take it as a reference.
Cause my customer don't want to use retro in SAP system, so I noted the schema about retro.
Now my question was how to get the last month calendar days in Schema. For example, now I am calculating the salary of July, the full attendance will be 30 days(06.28-07.27), in rule GKSOLL will get 31 days, so it's not right.
I hope you can get my point, below is the wrong rule.
Please guide me to correct it, thanks.
Regards,
May. -
When I check the Calendar Day View on the Notification Center, it only reveals the first five hours of the day (ie until 5am). No matter what time of the day it is. It should instead just show the upcoming hours as far as I know.
I do not have this issue on my iPad, but it is a constant problem on my iPhone 4S. I have tried rebooting the device, to no avail! Has anybody else experienced this problem and managed to solve it?
Regards,Mine brings me right up to the current time, or in the case of another day, it takes me to the first appointment of the day.
-
TS1347 Day View in Calendars - iPhone 4S upgraded to ios 7.1 and no more Calendar Day View??
I upgraded my IPhone 4S to ios 7.1 and now I can no longer view my Calendar by Day only. I have a toggle at top of Calendar that allows me to switch between a monthly calendar, or monthly calendar with a few appts on bottom of screen that I have to scroll thru in order to see that day's appts. And even then it only shows me my appts for that day, not the full day so that I can quickly find an open slot to add an appt. I now have to scroll painfully thru that little, 1-inch section at the bottom of screen, write down all appt times to then "figure out" what slots are open that day so that i can schedule things into open slots. Aaargghhh! What happened to my calendars? I know v7.1 made a mod to Calendars to allow for Monthly Views, but says nothing about removing Day View. How can I get back to a view that just shows me every hour of my workday TODAY?? I've spent hours looking thru every setting and nothing works. Can anyone help me to view Calendar? Note that my Calendar is coming in from Outlook.
Thx in advance for any help.Tap on any give date in the monthly view and you will be taken a list of event, the default position being the date you tapped.
The icon just to the left of the search icon provides a master list view of events.
http://help.apple.com/iphone/7/#/iph3d110f84 -
Hi,
I am not sure if this place is the right place where I am
supposed to post this.
Has anyone tried using Flex to build a calendar application
from scratch? I am having some problems with finding the right
elements that would display the calendar in a day view that looks a
bit like a timetable, but so far I have only found calendar
components that display in a monthly view.
Does anyone know if there are other possible components
other than mx:DateChooser to build an application that allows users
to list things in a day view, a monthly view and possibly other
customized views? Or, do I have to "establish" each of these
elements by compiling them manually with images?"alice_data" <[email protected]> wrote in
message
news:g94igg$o1f$[email protected]..
> Hi,
>
> I am not sure if this place is the right place where I
am supposed to
> post
> this.
> Has anyone tried using Flex to build a calendar
application from
> scratch? I
> am having some problems with finding the right elements
that would display
> the
> calendar in a day view that looks a bit like a
timetable, but so far I
> have
> only found calendar components that display in a monthly
view.
> Does anyone know if there are other possible components
other than
> mx:DateChooser to build an application that allows users
to list things in
> a
> day view, a monthly view and possibly other customized
views? Or, do I
> have to
> "establish" each of these elements by compiling them
manually with images?
I built something with a month and a week view. I used a
TileList for the
month, and a custom component that does something sort of
like an Accordion
that held a List with a custom itemRenderer for each day.
Essentially, I
had an array of dates that I grouped different ways for the
different views.
If I had it to do over, I'd extend HierarchicalCollectionView
to have a
grouping function and use that to group on the different time
periods. But
this is how I dealt with the dates...
http://flexdiary.blogspot.com/2008/05/working-with-dates-in-as3.html
HTH;
Amy -
Ipad Calendar day view does not automatically updated to Today
I have just got my Ipad4 and I am having problem with my Calendar app. I like to have my calendar app open in Day view. However, the Day view show the date that the last time I open the calendar app. So if the last time I look at my calendar is on 12/20 and the next day 12/21 I open calendar it still show 12/20. However when I go to Month view, it correctly show Today as 12/21. Going from Month View to Day view does not change the Day view to today until I hit Today button. Is this the correct behavior?
Can anyone tell me whether the behaviour that I described in my first post is what everyone experiencing? Do I miss some setting to make the calendar app update the day view to current date everytime I open it?
-
Calendar - Day View displays 2-hour meetings as 1-hour
Is there any way of changing the day view where currently a meeting, even though booked for 2-hours, displays as 1-hour?
Snick wrote:
Is there any way of changing the day view where currently a meeting, even though booked for 2-hours, displays as 1-hour?
Maybe I am missing something here in your question, but you are asking that if you schedule a meeting in your calendar for two hours, you want it only to display as a one hour meeting?
No, the BB calendar will display the amount of time you designate... if you book it for two hours it will display for two hours. If you schedule it for one hour, your calendar will display a one hour time block.
If you want it only to display a one hour time block, schedule the meeting for one hour.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Why does old events show up in Calendar day view? How do I make it show only from today forward
I have looked at everything but I keep seeing an event from early October as the first event in my day view and not my current days event. Any ideas on how I can change this so that it only looks from today forward and not backwards
It isn't a repeating event. But is marked as an all day event? On the weekly and monthly view it shows only on the specific day it should. On the daily view it is only on the left side that lists calendar events? Is there a setting I am missing
-
When I log into my Day View on the B Q10 I can't see any text that describes the 30 minute events/appointments I have set. The 1hour or longer appointments show the text. It is almost as though my calendar is "zoomed out" so the 30 minute appointments don't have visible text unless I open the appointment. My phone use to display the 30 minute appointments but I must have accidentally altered the setting and can't figure out how to switch it back.
Any idea how I zoom my view out permanently so I can see the 30 minute appointment description/text?
Thanks!
Solved!
Go to Solution.Did more reasearch and this worked... guess it was fairly simple.
Pinch to Zoom in Day View
The next time you are viewing your calendar in the Day view, using two fingers, slide them together to zoom in, or slide them apart to zoom out. -
Sometimes I am locked in "day" view in iCal. There is no where on the screen to choose "month" view, even when I close it out and open again. Tapping anywhere on the screen or scrolling doesn't help.
Give this a try:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete the contents the following folder: User/Library/Containers/com.apple.iPhoto
3 - reboot, launch iPhoto and try full screen again.
NOTE: For Mavericks and Yosemite, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox. -
this is something new with the new OS system
thanksMore than likely, especially since hot chocolate is a sticky solution, it has gummed up the headphone port. There is something in there that senses that the headphones are plugged in. You can try to clean it out with maybe a small round toothpick, but it might not be fixable. You may have to make an appointment with the Genius at the Apple store and see about an out of warranty replacement. User damage, including liquid damage is not covered under the warranty.
-
(IOS 7) Any way to show calendar list view in notification center instead of day view?
I updated to IOS 7 and I hoped to be able to check my schedule for the next day from the lock screen. Unfortunately at 1 AM the next few hours in the Calendar Day View in Notification Center was empty. The Today Summary just tells me when the first appointment is the next morning but not much else. Is there any way to change the calendar day view to the list view of appointments? Representing the relative times of the appointments with empty space seems like a waste. Especially when the Calendar Day View is 100% empty space and my appointments are just out of view in the wee hours of the morning.
Thanks,
JerrillMy biggest regret in updating to IOS 7 is the calendar. I often to tap from date to date and wish to see in LIST view my events... not in a today view as mentioned by the various posts above. As someone else noted, events are hiding below the screen view and one must scroll around to see if there are other events scheduled. I'm so afraid I'm going to miss something and make a committment in error. A list view is much more desired and efficient.
Change for the sake of change...why Apple why?
I have sent mass texts and Face Book messages to friends telling them not to upgrade to IOS 7 because of the calendar disaster and variouse other changes. Such as why is the font everywhere so small and light? One needs a magnifying glass to see everything that could be seen so clearly before. I've given friends a "tour" of IOS 7 on my iPhone and after seeing it many have thanked me and opted not to upgrade. I only wish I could have been saved. -
In Day view, how to jump to next month
I've just updated to 10.7 and while there are so many things that annoy me about this iCal update, I'm going to try and focus on some very straightforward user interface options that were both solid and useful in 10.6 (and practically every other calendar software ever built) but have disappeared with the "Here's what we think you'd like in a Western Wear store if you were made to go into a western wear store and buy the fringey glitter eel skin boots you don't really want" update.
In 10.6 in the day view, we could show multiple future months at a time by toggling an option in the lower left. Wow, pretty revolutionary. It's kind of like those paper calendars I've seen in Mad Men episodes from the 1950s that have an easy way to see many (or all) months at a time. Wow they had it good back then. In the 10.6 iCal software, it provides an easy way to jump to a future date to check on it (AND REMAIN IN DAY VIEW), which I'd say is a pretty essential part of a calendaring software program. One click, you're months in advance. One more click, you're back on today.
In 10.7, we get the handy current month at top left with a big number (and an abbreviated day, ***?), but from what I can tell, absolutely no easy way to get to a day view in a future month. For example, it's Nov 22nd. If I want to check on Dec. 1, what does one have to do? Let's review the "updated" options-
1. Click the day advance button 9 times
2. Switch to month view, advance to the next month, then double click on the Dec. 1
3. Use the event list tiny scroll bar to hunt the date down like the event carnivore that I am (Why am I forced to look at this event LIST anyhow, I just want a calendar - it's called iCal, not iList)
4. View menu, go to date, and manually TYPE in a date? Not even a graphic month view here, like you'd find in, say, ANY system that lets you pick a date?
But, maybe I'm missing something (other than 10.6)
Please, someone out there tell me this is not an OMEN of untested, experimental, and ugly updates to come from Team Cupertino.
Gonna go look at my eelskin boots now. Later y'all.
Looking forward to your thoughts.Hi,
any settings that are not possible in the XML, need to be set in the controller instead.
Using the string value of an enum is fine, though.
Regards
Andreas -
ICal: multiuser option displays in Day view each user in separate column?
I have been disappointed with the new iCal update. I do not see the option that would keep each calendar user in its own column when multiple calendars are displayed in iCal's Day view.
In a multiple calendar display view, I would like to see my calendar items in column "A", and my wife's in column "B" side by side, and not intermixed.
It is not acceptable that her empty slots are filled in with my items by expanding my column width to column "A" and column "B".
It is not acceptable that if her calendar item starts five minute earlier than mine, then it is displaid in column "A" and my calendar item jumps to column "B".
Is there a way in iCal to keep separate calendars in their own designated columns when displaid on multi calendar day view?I don't think there is another way for that. Did you try the pdf view?
You can try using LRO's
Regards
Celvin
Maybe you are looking for
-
Error in MIRO - " No taxes on sales/purch.are allowed for account 174600
Hi freinds, a have created new condition type for PO maintained the same Pricing procedure also .now my problem is while doing miro it is showing an error that " No taxes on sales/purch.are allowed for account 174600 1000, V0 is no is not allowed " p
-
Using Transparent Images in DW CS3
I am new to DreamWeaver and would like to know the best type of image to use when transparency is desired. I have tried png files but they don't work in anything but IE7 without the fix that you have to add to CSS for every image. When I use a gif it
-
What is the significance of Party and Service without Party in ID? Help!
Hi Experts, I often get confused with the Party and Service without Party in Integration directory. What is the difference between these two? When to use Party and When to use Service without party? Kindly help! Thanks Gopal
-
How do I loop through AFrames?
I feel dumb asking this but I really think the code I have should work. All I want to do is loop through all the aframes in a document. To do this, I assign the first Aframe to a variabe named vAFrame. Then, I created a while loop where the test is v
-
Premiere Elements 10 64 bit won't start
My issue: When I try to start Adobe Premiere Elements 10 64 bit the program will start to launch and then windows will announce "Adobe Premiere Elements 10 has stopped working" My System: HP Elitebook 8540w Intel i7 M640 CPU 8GB Ram 64bit operating s