Getting to the phone key pad from the call icon in the Hub

Why is it that in the Phone Icon in the Hub the phone keypad cannot be found and a speed dial call cannot be made? Why one has to exit the Hub Call Icon, and then get back in the phobe Icon out of the hub, to then go to the screen with the keypad to then make a speed dial call? Why call it speed dial? Why was it it changed?

Because its calls ie notifications
Tis Jaysus!

Similar Messages

Where's the phone key pad

how to find / where is the phone key pad with ios 7 all I get is face time no key pad

The delete key or backspace key is all that there is on a MacBook. It functions as a backward delete. If you want to use a forward delete, you need to hold down the fn (function) key in the bottom left of your keyboard and hit the delete or backspace key. For a more functional or normal approach for heavy writing, I might suggest an external keyboard with the forward delete key in place. -GDF

SPA303 phone key pad bleading over mic

Ever since my phone (SPA303) upgraded to software version 7.5.5 I have had an issue with the key pad bleeding over the mic while on speaker.
Example.
When I am on speaker and dial into a conference line that requires a pin, when I dial in pin (example) 12345 I get an error saying I dialed in 123345 or sometimes it is 1223445. Seems the key tone is bleeding over the mic and the phone sends it as a dial tone for that key. When I pickup the handset and dial in the pin, it works every time.
This happens on many different conf lines, not just one. (GoToMeeting, WebX, Highdef Conf Calling)

This is Video Over IP, please move to a relevant area.

TS1363 miss phone key pad

help find phone key pad

Hi Andrea,
To do this just hold down the alt key and then spell out the word using the multitap method. Even if you are using Suretype it reverts to multitap when dialing a number. It's kind of quirky because if you let up on the alt key at anytime while doing this and then press and hold it down again, it will type a letter just for the next key punch but then go back to numbers again until you let up and then press and hold it again. So if you get in that situation just pay attention to the icon to the right of where you are typing. It will show an ABC icon if you're in alpha mode and if you're in numeric mode it will show a green phone icon just like the one on your send key.

Key pad activates during call

Anyone have an issue with the phone keypad accidentally activating during a call? It doesn't happen all the time, just once in a while, with the phone held to my ear, I will start hearing the "beeps" from pressing keys on the key pad. Take the phone away from my ear, and the keypad is activated. I'll press the "hide keypad" button and continue on, but it's annoying. I've made a conscious effort to keep the sensor close so the screen won't activate, but it is still happening.
Any ideas?

I'm using a rubber Speck brand case that has sort of an upside down triangle hole cut out of it. The rubber is pretty thick. I wonder if it's thick enough to create enough distance to allow the key pad to activate, depending on how I'm holding it???

Why do I keep getting a "your phone is already on a call" message in FaceTime on Mavericks?

My iPhone is on iOS 8.02, the mid-2009 MacBookPro is on Mavericks. I'm trying to get the new feature, of initiating a cellular call from the Mac, but I keep getting an error message, that reads: "your phone is already on a call" in FaceTime. the iPhone 5s and the MBpro are right next to each other, signed in with the same Apple ID and on the same wifi network....

No answer, I'm afraid, but I'm experiencing the same problem. Mid 2012 MacBook Pro, iPhone 4s, both fully up to date.
Any number I try to dial from my mac results in the error message "Your iPhone is already on a call"
Is this a feature that requires iOS8.1?

How do I get my tags and key words from version 11 to version 13

I have converted my catalog from Photoshop 11 to Photoshop 13 but my tags and keywords do not show in my new catalog. Do I have to reenter the existing words into the new catalog? or is there a catalog from 11 and a new one will be started in 13? I am so confused!

Photoshop Elements

Why my phone key pad start typing it self?

Hi my phone touch screen is behaving abnormally, when ever i want to type some text it start typing it self, when vere i call any of my contact aftre the call my phone automatically switch to face time? please suggest what to do?

Hello shaghilasim,
Thank you for using Apple Support Communities.
For more information, take a look at:
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Have a nice day,
Mario

Anyone seen this?!? ORA-32103: error from OCI call

Greetings all,
Getting this error (ORA-32103: error from OCI call) when calling Environment::getCacheMaxSize() after calling Environment::createEnvironment(). The error is not listed in the Oracle documentation and I was wondering if anyone had seen it or knew what it meant.
snippet
Environment* env = Environment::createEnvironment(Environment::THREADED_MUTEXED);
std::cout << "ok..\n";
std::cout << "The env pointer:" << env << std::endl;
std::cout << "ok..\n";
std::cout << "Here is a Env variable:" << env->getCacheMaxSize() << std::endl;
end snippet
Many thanks,
John Fauntleroy

Thanks for the response!
I've not been able to get to the connection stage of the process as the error occurs just after the createEnvironment() call.I believe the Evironment is not being created correctly for some reason but have no idea why because no exceptions are being thrown and the my testing only yields an unlisted error. ack, frustrating tstl! The error I'm getting is "ORA-32103: error from OCI call". ORA-32103 is not listed in the oracle error docs. ORA-32101 and ORA-32105 are listed but nothing in between. Is interesting...
Anyone got some ideas?
Best regards,
John Fauntleroy

Odo I get my key pad to appear below the screen instead of covering the text above the screen

How do I get my key pad to appear below the screen

Touch and hold the "keyboard icon" key and select "Dock" from the popup menu.

I have an iPhone 4 and my lock button is jammed and I also can not touch anything on the left side of my screen well as any pop ups from the phone itself, so i can not get past the set up stage in reset process...how can i fix it/can it be fixed?

I have an iPhone 4 and my lock button is jammed and I also can not touch anything on the left side of my screen well as any pop ups from the phone itself, so i can not get past the set up stage in reset process...how can i fix it/can it be fixed?

Make an appointment at the genius bar and get the phone replaced.

HT201401 I have my a song purchased from Itunes and would like to use part of it for a ringtone and get all the way thur the process of getting it to my phone but it goes to sync to my phone it doesn't show up in my phone like it says it is suppose to und

I have my a song purchased from Itunes and would like to use part of it for a ringtone and get all the way thur the process of getting it to my phone but it goes to sync to my phone it doesn't show up in my phone like it says it is suppose to under ringtones. Does anyone have any tips on how to do this.

http://osxdaily.com/2010/09/04/make-free-iphone-ringtones-in-itunes-10/
https://discussions.apple.com/message/17777381 - making a ringtone
Getting ringtones folder to show in iTunes - https://discussions.apple.com/thread/2629494 - iTunes > Preferences. Under the General tab below Show, confirm Ringtones is selected

Iphone4 would not restore Error -50. I have tried to restore and it restored it to the point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out.

Iphone would not restore---- Error -50. I have tried to restore, and it restored it to the new point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out. I can see earlier backups in my C:\Documents and Settings\user\Application Data\Apple Computer\MobileSync\Backup folder. There are four subfolders in this address. I need my contacts, photos, and messages back. I know this is a common error but I can not figure it out. I have ran the other troublshoot items in the error steps for 13 and 14 like apple says. Is there a way to call apple and get a step by step of how to restore from another restore point? Does anybody have a solution????

It tells you to go to Error 13 and 14 if you receive error (-50).
Here is what I have tried...
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting. I have moved it around to different ports.
Put a USB 2.0 hub between the device and the computer. Didn't change anything.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts. Removed all virus protection and firewall.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.Used the Microsoft fix it.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online. Doesn't matter.
Try to restore from another known-good computer and network. I do not know how to do this or how to find the correct/full/complete restore point. There should be more information for this.

I just bought a new MacBook Air. In my old one, I could go from screen to screen by using three fingers to swipe over the key pad. This one just sits there. It is Yosemite. How do I set up preferences so I can use three fingers to move from screen to

I just bought a new MacBook Air. In my old one, I could go from screen to screen by using three fingers to swipe over the key pad. This one just sits there. It is Yosemite. How do I set up preferences so I can use three fingers to move from screen to screen?

Those choices are controlled via System Preferences, Trackpad.

I can not get all my music to sync from my phone to the itunes on my laptop. It is only letting me sync the music I purchased from my phone on itunes to my laptop. Any way to be able to get all of it sync'd to my computer for a back up.

I am trying to sync all my music from my iphone to the itunes on my laptop but it is only allowing me to sync songs i have purchased from itunes on my phone. Is there a way to get all the songs I have on my phone to syn with my lap top? I dont want to loose any of my music but litterally half of my music will not sync to the itunes on my laptop.

How did you move the music to the external drive? What exactly is on the drive? The entire iTunes folder or only music? If it is the entire iTunes folder you can do the option+start suggestion earlier. If you copied only music and did so by dragging it there then you need to delete it again and consolidate/organize it there instead so iTunes tracks the move. iTunes 12 for Mac: Change where your iTunes files are stored - http://support.apple.com/kb/PH19507

Getting to the phone key pad from the call icon in the Hub

Similar Messages

Maybe you are looking for