Getting to trash from firewire boot mode

Is there a way to get to a users trash bin from firewire target mode? The iBook will not boot and I think there are files on the trash that need to be restored to get the computer to boot.

It is unlikely if you trash specific files, that restoring them will allow a machine to boot. What you may want to do is if any of those files in the trash have critical user data is to restore them to your Users -> yourname folder. The trash resides in an invisible folder under Users -> yourname called .Trashes The freeware Tinkertool allows you to view that folder if you can't see it normally.
Once you've restored your critical files from the trash, backed up the entire user folder at least twice, and any applications if possible, then make sure you have sufficient space, you may be able to archive and install Tiger over again, as long as you apply the correct combo update to follow it. See my FAQ* for tips on that:
http://www.macmaps.com/upgradefaq.html
- * Links to my pages may give me compensation.

Similar Messages

Booting from firewire target mode on a mac pro with kernel panic?

hello
i am wondering if it is possible to use firewire target mode to boot a mac pro that has never got past a multi language kernel panic on boot?
basically i have tried all the other options and cant get it to open the superdrive to insert my installation disk, as to repair the drivers with my snow leopard disk.
i've tried holding my mouse key down, the paperclip option on the drive itself and the firmware keycombo, so my idea is that the only way to fix it is with target mode. can this be done - and if so - could someone direct me towards a tutorial that will help me do this.
please advise if this is possible or if there is another method i should use? apart from taking it to the applestore (extreme last ditch option) i am quite low on ideas here.
many thanks!
p.s heres the message i wrote for the original problem which caused all the kernel panics;
"i recently bought a mac pro and upon starting it for the first time opted to transfer the all the data i could over via firewire from my macbook pro.
i used the standard 't' command with the firewire symbol.
Somewhere towards the end of the transfer (I am not sure at what pont - I wasnt there for all of it) - , the monitor went blank and the whole thing was unresponsive. my macbook's firewire sign continued to move around the screen.
after leaving it for some time i decided to turn off the macbook and then the mac pro.
i restarted the macbook and got some pretty crazy stuff happening to my calender - but so far everything seems to be fine.
i am more concerned about the "you need to restart your computer" message; this is the dreaded 'kernel panic' right?. i have never actually done anything with this computer yet, and it was purchased new."

"i recently bought a mac pro and upon starting it for the first time opted to transfer the all the data i could over via firewire from my macbook pro.
Never opt to transfer until you have insured it works fine for a couple days, I would never use Setup or Migration Assistant until such time, and I would have a bootable backup clone.
Try pulling all the hard drives from inside your Mac Pro and boot from OS X DVD - latest OS build.

How can i get my iphone, from the disable mode

how can i get my iphone 3gs, out of the disable mode?

If your phone is disabled because you forgot your passcode, restore the phone on the last computer it was synced with. If you do not have access to the last computer it was synced with, you will have to force it into recovery mode & restore as a new device. See http://support.apple.com/kb/HT1212.

IMac G5 won't boot in normal and safe mode, but will from single-user mode

Hello everyone,
I'm quite new here, so I try to do my best if you have a question.
Yesterday, someone nearby me had a iMac G5 (Powermac8,1), and he sayd, that the computer sometimes will boot, sometimes not.
I did test it, I thought it was running fine, but when I played some music in iTunes, it was stuck on 9 seconds, and crashed (with a kernel panic). The guy also sayd, that there was nothing important on the computer, so a clean install was fine.
Now, the problem is, that it will not boot in normal mode (without anything pressed on boot), also it won't in safe mode (shift-boot), but it will, when I enter single-user mode, mount the hard drive and exit from single-user mode so it will go futher on booting. Sometimes it will not, and immediately gives you a kernel panic in single-user mode, but it will 90 percent of the time.
Then you've got another problem: when it's running in the normal desktop from single-user mode, it'll be stuck after some time again. If I look into the Kernel Panic file created, most times it's because of Spotlight indexing, so I disabled that.
He also gave me the disks (Apple Hardware Test and Extra Applications, and iMac G5 Mac OS X Install Disks 1-3) that came with the Mac. He sayd that I could use them, but I think he didn't test out the SuperDrive, because when I insert a disk, it will try to read, but it will make 2 same sounds, and quits after 10 tries, when it will spit the cd out. Also normal (audio) disks.
Also, I must hurry with the commands for mounting and exiting in single-user mode, or it will just not boot.
In all cases, after 30-45 seconds from pressing the power button, the fan will start blowing at full speed, and it will stop after the exit command in Single-user mode. That's weird.
I can't do anything with the SuperDrive, I can't normally boot in Mac OS X except for Single-user mode (but I don't think he would like to do that every time the computer boots up), and I have very limited time when Mac OS X arrived on the desktop.
When booting in Verbose mode, it will be stuck on this:
AppleSMU::PMU vers = 0x000d004c, SPU vers = 0x15, SDB vers = 0x01,
(and sometimes ends with a kernel crash by fsck_hfs)
Things I've tried (without any success):
- /sbin/fsck -fy (in single-user mode)
- Disabling Spotlight and mds
If you want some more information, feel free to ask!
Greetings
-MrYoranimo
PS: My main language is Dutch, so my English can be bad at some points.

Thank you for your support! This reply is a little bit late, because I was to the camping this weekend.
The only thing I sure do know, is that the iMac has a bad SuperDrive. That's one problem, but I don't really wanna use it, and you fix everything by Single-user mode and when I get to the desktop to test things and change stuff in the Preference Panes.
What also came to my mind was that there also is a problem with the videocard (driver), because sometimes when I boot into Single-user mode, I can see some white pixels which aren't supposed to be there. And when booting from SUM you can see that some of the colors are different and there are weird patterns on the screen.
I also tried to setup a NetBoot server on this computer (MacBook Mid 2010) with just Lion 10.7.4 on it, but I'm not that expert and I didn't really find the good posts on the Internet, although I tried it with the Server applications and both Server applications and DeployStudio. But I didn't succeed.
I don't really like buying a new FireWire hard disk or external FireWire dvd reader/writer, except if it has USB support, because my MacBook doesn't support FireWire, and I really wanna make use of it then.
If I know more or have fixed it, I will surely post again here with what I did to fix it (if no one else has posted here already ).

Boot from FireWire External Drive WITHOUT mounting internal Hard Drive

Is it possible too boot a PowerBook G4 over FireWire (this part works) WITHOUT mounting the internal hard drive at boot time - i.e. never mount the internal hard drive when booting from FireWire?
There is an Oreilly article at http://www.oreillynet.com/pub/h/341 which discusses using "niutil" but it is not clear how to indicate the internal hard drive should not be mounted.
The boot from FireWire works fine but how do you tell Mac OS X to ignore and never mount the internal hard drive? There used to be an /etc/fstab file where you could specify drives to mount. The /etc/fstab.hd file comments now say "IGNORE THIS FILE.
This file does nothing, contains no useful data, and might go away in
future releases. Do not depend on this file or its contents."
Thanks,

That is not the problem - I have been using the startup manager by holding down the option key during boot-up. I am having no problem getting the PowerBook to boot from the FireWire Drive.
*The Problem* is that after the PowerBook has booted from the exernal FireWire drive, I still see the internal hard drive of the PowerBook on the desktop. I do not want this. Some key points to note:
[1] I can unmount the interal hard drive and remove from the desktop only by using the Disk Utility in the Applications/Utilities folder. There is a button there to "unmount selected volume"
[2] The finder does not have an icon next to the internal hard drive icon to allow the internal hard drive to be unmounted when booted from a FireWire drive
[3] I want the MacOS X kernel to be configured to not automount any hard drive volumes at bootup - this used to be possible by editing the /etc/fstab.hd file but that file does not appear to be used any more per the commennts in the file.
**Remaining Question** How do you configure the MacOS X kernel to prevent it from mounting any other hard drive at boot time? I do not want to use methods [1] or [2]
Thanks

My iMac (late 2006) no longer boots from FireWire drives, although they contain all the system files.

My iMac (late 2006) no longer starts (boots) from Firewire drives, although they all contain a current system (Mac OS X 10.6.7). If the drives are connected with USB 2, they boot normally. The FireWire drives appear in the Start Volume program, but they do not boot. If I press and hold the Alt key while booting, only the internal drives and the USB drives appear as options. What can I do in order to boot from FireWire drives as I always could in the past?

I'd first recommend doing a SMC reset and if that doesn't work refer to:
http://reviews.cnet.com/8301-13727_7-10333969-263.html
and
http://www.thexlab.com/faqs/firewiretroubleshooting.html
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Roger

How do I get mac book pro to boot from hard rive and not slave without holding option key

How do I get my Macbook Pro to boot from Hardrive and not the slave drive with out pusing the "option Key. I set up a drive on lion and now my MacBook Pro will not boot to the hardrive with out holding the "Option Key" down. i have to disconnect the UBS drives before it will go on it own.

System Preferences > Startup Disk. Select the volume you prefer to boot from.

Whenever i on my iphone 5 from switch off mode, it always ask passward of my apple id for every downloaded application to get started?

Whenver i on my iphone 5 from switch off mode, it always ask passward of my apple id for every downloaded application to get started?

Hello knarfsnrub,
Welcome to the Apple Support Communities. if you are having issues with connecting the Remote app with your Apple TV, then the following article provides troubleshooting steps to resolve the issue.
Remote app for iPhone, iPad, or iPod touch can't connect to iTunes or Apple TV
http://support.apple.com/kb/TS1741
Regards,
-Norm G.

HT1526 trash from my segate external hard disk.But i am unable to empty my trash box ,getting an error(Error code -36)how to trash?

I had moved some folder to trash from my segate external hard disk.But i am unable to empty my trash box ,getting an error:The Finder can’t complete the operation because some data in “” can’t be read or written. (Error code -36): pls advise,how to trash

Hi, what format is the external drive?
Well, in pure Apple File System talk... -36
ioErr
I/O error (bummers)
Not very helpful, but generally means a Drive quit being Readable or Writable since starting the operation...
http://fuzzy.wordpress.com/2006/12/10/ioerror-36/
The other -36 is a Windows/SMB issue.
Solving Trash Problems...
http://thexlab.com/faqs/trash.html

Plz tell me how I can get back from the recovery mode to my normal mode without lossing data ... actually I was trying to update ios 7 in my 4s so then mobile stuck into recovery mode...plz help?

plz tell me how I can get back from the recovery mode to my normal mode without lossining data...I stuck in this mode while I was try to update ios 7 in my 4s

If it's in recovery mode, anything on the phone is already gone. Restore the phone using iTunes, then restore it from your last backup. If you've been backing up on a regular basis as intended, you won't lose anything except what's changed since the last backup.

Flex GUIs get a bad performance in normal screen mode when switched from full screen mode

Hi, there :
I encountered an odd situation and it is only happens on IE. Our project is a Flash 3D Game using Stage3D, and the Game's GUIs are created by CS6. When our game switch from the full screen( StageDisplayState.FULL_SCREEN_INTERACTIVE or StageDisplayState.FULL_SCREEN ) to normal screen ( StageDisplayState.NORMAL ), the performance of the Game GUIs decline to approximate a half FPS of full screen mode. But this condition is only happens on IE.
The Game is normal screen when it is initialized and the performance is as same as fullscreen. The performance degradation only happens after switching to normal screen mode from full screen mode.
p.s. : When the mouse is out of the view, the performance become better, from 20 fps up to 50 fps. But is still not as same as the original 60 fps.
p.s. 2 : My colleague told me the Flash Pro CS6 be used to built a single swc file per GUI, and then package all ui swc files to one swc file by Flex Framework SDK( the command is "compc" ). and the IE version = 9.0.8112.16421, the Flash Player Version = 11.6.602.155.
p.s. 3 : I have utilized Adobe Profiler Scout to observe the application, and I found that when it switches to normal screen mode from full screen mode, the time 「Waiting for GPU」 in 「Inactive」 grows up from 10ms to approximate 30ms which is triple. And in the 「Activity Sequence 」tab, it shows that the 「Waiting for GPU」 happens in the 「Copying to screen 」in 「DisplayObject List」.
Thanks

This does sound like a specific bug with IE. It would be great if you could file a bug report here (https://bugbase.adobe.com/), so we can get somebody to look into it.
btw, Flex is really not a good framework for games - it's really slow and heavyweight. If you're just wanting some lightweight UI elements, you might want to check out the Feathers framework, which is built on top of Starling: http://feathersui.com/

Recently, I can't get any sound from my game applications. Sound works fine with video, streaming, etc, but not my game applications. I've tried powering down and re-booting, but the sound does not return. Can anyone help me?

Recently, I can't get any sound from my game applications. Sound works fine with video, streaming, etc, but not my game applications. I've tried powering down and re-booting, but the sound does not return. Can anyone help me?

Have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad above the volume switch, or via control centre : swipe up from the bottom edge of the screen and it's the right-most of the 5 icons in the middle of it (if the icon is white then it's 'on', tap it to turn it grey and 'off'). The function that isn't on the side switch is set via control centre instead : http://support.apple.com/kb/HT4085

I bought a iphone 5s from gumtree. While trying to activate it i realised there was an account linked to it through an apple id. it doesnt say the phone is in lost mode and it still has warranty. am i able to get a fix from apple?

i bought a iphone 5s from gumtree. While trying to activate it i realised there was an account linked to it through an apple id. it doesnt say the phone is in lost mode and it still has warranty. am i able to get a fix from apple?

unfortunately - no
if the device is on ios 7.1 or above there's two things.
1) the device may be restored to factory settings - but the phone can't be activated. imei unlock is different to Iphone activatio. - your friend unlocked it to use any sim in any country. iOS 7 forces you to restore the phone and reimpit the original icloud login. This can only be solved if you a)forgot the login/changed it, and can prove to apple youre the owner; b) to get the original owner to deauthorize his account associated with the phone, on his/her computer.
2)if there's also a Passcode lock on the phone, and the last registered sim doesn't work (in the case of a stolen phone) - then it's impossible for you to do anything, full security = restore will lead to activation lock immediately. There's no bypass to it, the fake videos online only allow a bypass if the device was a 'jailbrokem' one - which would invalidate apple trying/ever wanting to help you.
if you know who the phone belonged to previously (usually comes up with the icloud username on it) then you can ask them to deactivate it.
otherwise, you have what we call - a brickb- won't even work as a super iPod touch
my iphone was stolen on sat in prague - white, 32 gb iphone 5 - if it's mine, I'll have it back please just incase

HT1212 how do i get my iphone from disabled mode?

how do i get my iphone from disabled mode?

You restore it using iTunes, as is clearly detailed in the article you linked from to begin with.

Keep getting a - CDBOOT: can't boot from CD (code 5).

Keep getting a - CDBOOT: can't boot from CD (code 5).on my imac

how to change the DVD to CD-ROM?

Getting to trash from firewire boot mode

Similar Messages

Maybe you are looking for