Getting today's dumbest topic over with - where is the documentation?

I'm trying to figure out how to stabilize some shaky footage. If I type 'stabilize' into the help menu search field it just points me to a video menu item, but I can't figure out how it works. In addition, nothing in the documentation is referenced. Anybody out there know where the FCE documentation pdf file is stored on the Mac. And yes, I did try spotlight...

Thanks to all who responded. What threw me was that I typed "stabilize" into the help search box and all it returned at that point was a reference to the menu item:
video filters -> video -> image stabilizer
and nothing else.
When I cleared the search box I noticed the first item pointed to the documentation (doh!) but I guess what threw me was that the original search returned NOTHING about "stabilize" from the manual - and there are certainly several references to that in there. I know the documentation is handled by Preview, but I guess I expected (a lot) more out of the help menu than I got.
As an aside, to the person that said FCE does not do Image stabilization, the documentation on the "image stabilizer" video filter seems to say otherwise, although it appears to mostly cater for a shaky tripod scenario rather than stuff containing panning and zooming (which is what I'm trying to fix).
Anyway, I've marked this as solved (thanks again) and now it's back to my yard work ...

Similar Messages

Apple maps has received a poor performance rating just after introduction of the iPhone 5. I am running google maps app on the phone. Siri cannot seem to get me to a specific address. Where does the problem lie? Thanks.

Apple maps has received a poor performance rating just after introduction of the iPhone 5. I am running Google Maps app on the phone. SIRI cannot seem to get me to a specific address. Where does the problem lie? Also can anyone tell me the hierarchy of use between the Apple Maps, SIRI, and Google maps when the app is on the phone? How do you choose one over the other as the default map usage? Or better still how do you suppress SIRI from using the Apple maps app when requesting a "go to"?
I have placed an address location into the CONTACTS list and when I ask SIRI to "take me there" it found a TOTALLY different location in the metro area with the same street name. I have included the address, the quadrant, (NE) and the ZIP code into the CONTACTS list. As it turns out, no amount of canceling the trip or relocating the address in the CONTACTS list line would prevent SIRI from taking me to this bogus location. FINALLY I typed in Northeast for NE in the CONTACTS list (NE being the accepted method of defining the USPS location quadrant) , canceled the current map route and it finally found the correct address. This problem would normally not demand such a response from me to have it fixed but the address is one of a hospital in the center of town and this hospital HAS a branch location in a similar part of town (NOT the original address SIRI was trying to take me to). This screw up could be dangerous if not catastrophic to someone who was looking for a hospital location fast and did not know of these two similar locations. After all the whole POINT of directions is not just whimsical pasttime or convenience. In a pinch people need to rely on this function. OR, are my expectations set too high?
How does the iPhone select between one app or the other (Apple Maps or Gppgle Maps) as it relates to SIRI finding and showing a map route?
Why does SIRI return an address that is NOT the correct address nor is the returned location in the requested ZIP code?
Is there a known bug in the CONTACTS list that demands the USPS quadrant ID be spelled out, as opposed to abreviated, to permit SIRI to do its routing?
Thanks for any clarification on these matters.

siri will only use apple maps, this cannot be changed. you could try google voice in the google app.

How do i get through find my i phone with out knowing the past apple id or password?

how do i get through find my i phone with out knowing the past apple id or password?

If the iPhone has Activation Lock - that is, it's asking for the previous owner's Apple ID and password to activate the device - then you will need that information, or you'll need to get the previous owner to remove the device from his/her iCloud account:
http://support.apple.com/kb/PH2702
If you can't reach the previous owner or he/she is unwilling to cooperate, then the device is unusable by you. If you recently purchased the iPhone, return it for a refund if you can.
Regards.

HT5361 Today, I experienced a problem with my mail. the time and date on each email received and sent is 18-06 and the date is 22nd July irrespective of the actual time

Today, I experienced a problem with my mail. the time and date on each email received and sent is 18.06 and date as 22nd July. Thank you John

Incorrect date or time displayed in various applications

ADOBE FORM for SAP - where is the documentation

Hello Everybody,
I started to work with adobe form for two weeks now.
And i am wondering something since two days where is the documentation ?
On adobe forums, we find a quick FAQ.
On SCN there is some documentation.
But where is the official or/and most complete documentation ?
Is the full documentation given when you buy the adobe product or is there a full on line documentation ?
Best Regards
Abdou

Here is documentation for formcalc
http://help.adobe.com/en_US/livecycle/es/FormCalc.pdf
Here is documentation for Scripting (JS)
http://help.adobe.com/en_US/livecycle/es/lcdesigner_scripting_reference.pdf
Here is the documentation on the whole package
http://help.adobe.com/en_US/livecycle/9.0/designerHelp/index.htm?content=000403.html
Here is some additional practice to know how to use LiveCycle
http://www.youtube.com/channel/UC6E8WlISDmgiyyq5ZWk-nVw

Adobe Air Framework - Where's the Documentation

I'm very confused about how to use the Adobe Air Framework to learn how to update my apps. There are tutorials on the Adobe website, but they're all from either 2008 or 2011 and are discussing Air 1.5 or 2 or 2.5 versions, but since I'm using Air 3.7 I would like to see examples of how to use the Framework.
I'm new to Air, but not to AS3. It sounds like the Framework includes API's that allow you to update apps and more, but I cannot find where the documentation is specifically. I continually find:
http://www.adobe.com/devnet/air/documentation.html
http://www.adobe.com/devnet/air/articles/air_update_framework.html
http://forums.adobe.com/thread/1156048
http://code.google.com/p/nativeapplicationupdater/
http://www.adobe.com/devnet/air/articles/updating-air-apps-native-installer.html
http://help.adobe.com/en_US/air/build/index.html
and a few others, but I'm hoping someone can help me find what I need. Maybe the Framework hasn't changed from version 2 to 3, but I know it has from another article I read.
I'm using Flash Professional CS6 and working entirely within that program.
Any suggestions?

I'm just about to head out, but I think these two links are possibly what you're looking for it contains all the documentation you could ever need for the latest AIR SDK's:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/index.html?filter_air=3 .7
http://www.adobe.com/devnet/articles/flashplayer-air-feature-list.html
If it's not I'll post a little more when i get back if someone else hasn't already.
Edit:
Back now, I so you're looking to implement a form of updating your application from within itself using the Air Application updater. The second link you've provided explains everything on how to do this, just ignore all the MXML and use the snippets that are provided in the examples. There is no difference between the framework released in 2011 (with regards to updating) so any tutorial around this time will be sufficent for you. I quickly googled this one for you and it seems to be easy to understand:
http://kirill-poletaev.blogspot.co.uk/2011/06/updating-air-applications-part-2.html
Hope that helps.
O.

How to create a view with parameters; read the documentation but nothing!

Hello!
I'm new to the Oracle world but together with my coworkers we need to very quickly study Oracle to figure out whether we'll add Oracle to our list of supported databases or not.
Question: How do I create a view with parameters?
I've read the documentation but I could not find this! I found the sql syntax to create a view but no parameters whatsoever...
I have found on the web some very complicated way of doing this, but doesn't Oracle support Views with parameters?
The goal here is to return a recordset, don't forget, so,please don't speak about stored procedures unless you are going to tell me how to get a recordset out of a stored procedure! ;)
Thanks for all your help and attention!
Jorge C.

You can set up a parameterized view via context as follows:
1. Set up a procedure to set your context values:
create or replace procedure p_set_context (p_context IN VARCHAR2,p_param_name IN VARCHAR2,p_value IN VARCHAR2)
as
BEGIN
sys.dbms_session.set_context(p_context,p_param_name,p_value);
END;
2. Create your context using the procedure you just created
create or replace context my_ctx using p_set_context
3. This is the test table I'll use
create table my_table(col1 number)
and populate it:
begin
for v_index in 1..10
loop
insert into my_table values(v_index);
end loop;
end;
and the view that will be parameterised
create or replace view v_my_table as select col1 from my_table where col1 between sys_context('my_ctx','start_range') and sys_context('my_ctx','end_range')
4. Now set the parameters using the procedure above.
begin
p_set_context('my_ctx','start_range','1');
p_set_context('my_ctx','end_range','5');
end;
5. Selecting from my_table will give you 1 to 10 (no surprise there :-) )
selectng from v_my_table will give you 1 to 5
You can use the context to set formats etc using the same principle. A common gotcha to watch for is trying to set the context directly using DBMS_SESSION.SET_CONTEXT instead of creating a procedure. This belongs to SYS and SYS won't have the privileges to set your context so you get an insufficient privileges result leading to much headscratching and unnecessary grants (at least that's my understanding of it).
Sorry Jorge, as you're new to Oracle I should also have pointed out for completeness sake, that you can change the parameters at any time through recalling the p_set_context, for example, following on from above, after your "select * from v_my_table" and seeing 1 to 5, you could then do
begin
p_set_context('my_ctx','start_range','3');
end;
and when you requery 'Select * from v_my_table' you will now see rows 3 to 5.
Bit of a simplistic example, but you can see how easy it is. :-)
Message was edited by:
ian512

Where is the documentation about PostgreSQL?

Could not get the docs as mentioned on the LION Server Manual: "PostgreSQL, view its documentation at http://www.example.com/postgresql/ (replace www.example.com with your server’s URL)." It shows an error message saying the page could not be found.

I found the solution. Thanks baltwo.
Actually the documentation Apple manual mentioned is located on LION Server at: "/Library/WebServer/Documents/postgresql/html/". Under html you can find the file index.html.
I would like to add that LION Server already has two system accounts with the same short name for them "_postgres" (person and group). What you have to do is to add your account to postgresql group using Server app.
Under View select Show system accounts.
Also the postgresql sample config files can be found at: "/usr/share/postgresql/".
I also recomend downloading phppgadmin, expand it and copy to your LION Server WEB document folder. After that you can use Safari to call it "yourServerURL/phppgadminFolderName/". The user name is "_postgres" and the password is your account password.
I forgot. You have to start WIKI service to start postgresql. Otherwise you must start using the Terminal before using phppgadmin.

Where's the documentation or user guide?

I am now working through the twelve lessons in Adobe Premiere Elements 11 Classroom in a Book. Several times the book says to refer to Premiere Elements documentation or user guide for a full explanation of a subject. Is there such a thing and where do I find it? There is plenty of clear information in the Help and Tutorials but not the documentation that comes, for example, with a camcorder.

Tommy,
You will find a lot of that here: http://helpx.adobe.com/pdf/premiere-elements_reference.pdf
Also, the Help File, F1, will have good material too, and is active on-line, so there are some comments via Community Help there, as well.
If you are new to PrE, here is a partial list of useful resources: http://forums.adobe.com/message/3953827#3953827
I particularly recommend Steve Grisetti's Basic Training Series on Muvipix.com.
Good luck,
Hunt

Where is the documentation for Oracle Spatial Relational Model?

Hi,
I'm working with Oracle Spatial for my schema model. In the documentation "Oracle Spatial User's Guide and Reference" there is a note about what this is in OTN but i don't find it!!
Can anybody help me, where I find the "Oracle Spatial Relational Model Guide and Reference"?

Thanks! But just i have read this information. And in the documentation for spatial 9.0.1 there is one document only, and in this document there is a Note that reference to nonexistent document with title "Oracle Spatial Relational Model Guide and Reference" this is the document that i'm searching.
Thank you for your help!

Where is the documentation?

Hello,
I just purchased the electronic-download version of CS4. I can't find the documentation! Can anyone tell me where it is? Sorry for the dumb question,
Ben

The menu Help – Photoshopop Help should connect You to the online-help, if You want to download the pdf You might try:
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb408379

Where's the documentation to submit a Samsung Paper Garden DPS application?

Is this done separately from Google Play APK?
Does Samsung have its own portal for uploading signed Paper Garden APKs?

Papergarden is by Samsung invitation only. There's no submission guide as they work directly with publishers on the process.
Neil

Where is the ******* documentation/manual/reference?

Anyone knows?
It should be so pervasive, I should have found it immediately. Instead I am searching Adobe and Google after not finding anything on Pixel Bender SDK's page on labs.adobe.com
Does there even exist official documentation?

I am not really trying anything in particular, as I am using a whole another compiler (haXe) that assembles the .pbj kernel files for use by Flash Player, and just need some sort of documentation for that which Flash Player runs.
Now I know Pixel Bender is not the same as that which runs assembled .pbj files, but regardless, no documentation for either can be found easily.
I am running Linux and the only option for me currently with regards to Adobe's Pixel Bender Toolkit is to try and run it in Wine, which it does NOT do because the installer uses some features of WinAPI that Wine does not yet have in its code. Fair enough. I don't seek advice on making it run, I just need some human readable text for making sense out of Pixel Bender beyond the advertisement of features on labs.adobe.com/technologies/pixelbender and sporadic tutorials (which assume I already have the documentation), neither of which help me.
All I wanted is to extract the documentation, since it is, by some design flaw from Adobe, ONLY available from INSIDE running/installed Toolkit, and not like a standalone PDF like the rest of Adobe's manuals.
I found ONE SINGLE third-party copy of this PDF from a Korean website. This speaks volumes about Adobe supporting developers, does it not?
P.S. Good gods, the performance of this JavaScript/AJAX-ridden bloated forum really SUCKS. And don't tell me Firefox on Linux is inadequate, this is the first one that is so awful in performance - apparently these "programmers" from Jive Software have trapped cursor moving or textfield changing event, because there is something seriously wrong with typing experience here. I can't type normally without cursor freezing for half a second each second character or disappearing from view sporadically.
Yes I am a harsh critic, but I do weigh what I write.

Where is the documentation for the sdo_mvclient plsql package?

I am trying to use the sdo_mvclient package in my apex application but there is no documentation for it other than the mapviewer user guide which has like 5 lines of example code and that's it.
Or so it seems...
Where is the rest?

Oh never mind, i should look at the java API

Need Help for getting today's records from sysdate with current time.

Here is the procedure which gives me the below mentioned output.
Create or Replace Procedure pt(rdate date default sysdate) is
sdate date;
edate date;
begin
sdate:=trunc(NVL(rdate,sysdate));
edate:=NVL(trunc(rdate)+23/24/+59/24/60+59/24/60/60,sysdate);
dbms_output.put_line(sdate || ' ' || edate);
end;
Scenerio 1 (This is ok and is giving the desired output)
In the above procedure if i give any date as parameter then it will take the input date as the parameter and execute accordingly and gives the result like SQL> EXEC PT('02-JAN-07');
SQL> 02-02-07 00:00:00 02-02-07 23:59:59
Scenerio 2 (This is giving problem it is not giving the desired output).
In the above procedure if i dont give any date as parameter then it will take the sysdate as the parameter and execute accordingly and gives the result like SQL> EXEC PT();
SQL> 25-10-07 00:00:00 25-10-07 23:59:59
INSTEAD OF THIS OUTPUT FOR NOT GIVING ANY DATE PARAMETER I SHOULD GET BELOW O/P
SQL> 25-10-07 00:00:00 25-10-07 12:28:43 THE CURRENT DATE AND TIME
AND NOT 25-10-07 23:59:59.
Here i think the NVL function is not working properly or i am doing something incorrect, Cna anyone guide me.
Thnx

Scenerio 1 (This is ok and is giving the desired output)
... and gives the result like SQL> EXEC PT('02-JAN-07');
SQL> 02-02-07 00:00:00 02-02-07 23:59:59
02-JAN should be 02-01
This?
SQL> declare
   rdate date := sysdate-5;
   sdate date;
   edate date;
begin
   select trunc(nvl(rdate, sysdate)),
      trunc(nvl(rdate, sysdate))+1-(1/24/60/60)
   into sdate, edate
   from dual;
   dbms_output.put_line(to_char(sdate,'YYYY/MM/DD HH24:MI:SS') || ' ' || to_char(edate,'YYYY/MM/DD HH24:MI:SS'));
end;
2007/10/20 00:00:00 2007/10/20 23:59:59
PL/SQL procedure successfully completed.

Getting today's dumbest topic over with - where is the documentation?

Similar Messages

Maybe you are looking for