Getting UConn 8.5 to work with both Exchange 2007 and 2010

According to the document below, I should be able to set up one Unified Messaging service to access mailboxes on both Exchange 2010 and Exchange 2007 servers. I setup my service to point to 2010 CAS servers and I can access 2010 mailboxes, but testing 2007 mailboxes comes up with an http 200 error. If I setup the CAS server as 2007, I can access 2007 mailboxes, but get an error on 2010 mailboxes. This will be a real pain if I can't do this with one service. I don't want to have to keep Unity Connection updated as users get moved from 2007 to 2010! Anyoe know how to do this?
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/unified_messaging/guide/85xcucumg020.html#wp1198171

I got this to work! My Unified Messaging Service was originally setup to Specify an Exchange Server. That is where I had put the DNS name of the CAS server (and that DNS entry pointed to several CAS servers). I changed the Service to Search for Exchange Servers instead and used that same DNS name in the Active Directory DNS Domain Name. When I do the test of this service, it tells me it Failed to locate a Domain Controller via DNS, but that is just informational. It also says it successfully connected to the Exchange CAS server with the autodiscover.xml. Now my mailboxes on both Exchange 2007 and 2010 are able to receive voicemail messages with this one Service configured.

Similar Messages

Running Unity with both Exchange 2003 and 2010?

My company is planning to upgrade from Exchange 2003 to 2010. We are
currently using Unity 7.0. We'd like to run the two in parrallel for a bit and take our time switching users over.
Now I've read that Unity can support Exchange 2010, but I haven't found anything about running Unity using both Exchange 2003 and 2010 in parrallel.
Is this something Unity can handle?

We're doing something similar, but we have an in-place Unity 7 and Exchange 2003 environment; we are putting some users from an org we support on an Exchange 2010 server, but do not want that to be the partner server (yet). The instructions seem to point you to making 2010 the partner; I'm wondering why Step 13 (of your link) we are uninstalling the Exchange Server 2003 System Management Tools, if it’s a mixed environment and 2003 will still be the partner server. I also saw somewhere that you don’t have to move the unitymsgstoresvc account to Exchange 2010 if you are in a mixed environment. Is that true? Thank you.

Exchange 2007 and 2010 with Unity Connection 8.6

Hi all,
We have unity connection 8.6 and exchange 2007 currently in place and runnign fine. I am ready to start migrating mailboxes over to our new exchange 2010 farm and as such we will be in co-exsistance with exchange 2007 and 2010 for awhile. What are the steps or procdures to also include exchange 2010 with the 2007 in unity connections? Currently under Smart Host is the IP address of our exchange 2007 server.
Thank you.

Hi,
This depends on how you plan on performing the migration. I would suggest the following:
-Creating a new unified messaging service for Exch 2010. You can re-use the same service account name as long as you completed the configuration steps for that integration.
-As you move over user's mailboxes from 2007 to 2010, you can delete the 2007 UM service and add the new 2010 UM service. If you want to change many users at a time you'll need to use bulk administration to change them. If you use BAT to change accounts, see the link below where I have listed them out for another CSC user.
-You can change the Smart Host setting once you have configured the Exch 2010 enviornment to handle your main corporate mail (changing the MX records to point to a 2010 Edge Transport).
Changing the UM service with BAT:
https://supportforums.cisco.com/message/3572200#3572200
Good luck.

I can not get 3D surround sound to work with my X-Fi and headhones please he

I have an X-Fi Xtrememusic soundcard and I have been unable to get possitional sound working consistantly with two sets of stereo headphones. I have the latest drivers installed and have creative audio console set to: headphones, game mode, CMSS 3D and I still have no possitional sound at all. Noises seem to come from above my head I can't tell right from left or forward from backward in other words I am completely lost as to were sounds are coming from in games. I used to be able to get possistional sound to function by changing headphones in the creative audio console to 2. or 4. speakers.
If I set the mode to 5. or higher the sounds in games (footsteps, weapons fire) would become heavily muted and hard to hear while I would gain better positional sound for other players and now this does not work at all. I have also tried disabling sync to windows control panel and changing its sound options and there have been no beneifts from doing so. In settings other then stereo headphones no sound was produced at all while others stopped sound coming from one of my headphone speakers. I am at a total loss I can not think of anything thing else to fiddle with.
My system specs: Athlon 64 4000+ San Diego, ASUS A8N-E mobo, 2GB DDR400 2.5CAS Buffalo ram, EVGA 7800GT CO, X-Fi Xtrememusic. No popping or crackling sound at least. Thank you you reading this.
<SPAN class=time_text>
<SPAN class=time_text>
<SPAN class=time_text>
Message Edited by Blah-and-Feh on 04-5-2006 :50 PM

Hay everyone thanks for the advise but i was finally told by one of the support personnel that I actually need the dri've bay insert that comes with the fidelity in order to get the cmss 3d to work with the headphones.
I only purchased the extreme gamer not the extreme gamer fidelity and that is why i cant get the cmss 3d to work but it still advertises on the box that you can use the cmss 3d and get that feature. :angry:? Should have done homework but i was out Christmas shopping and i went off of what the box advertised. This is very unusual for me to shop compulsi'vely. The funny thing is that everything else on the box that is advertised such as the increase of the CPU and the EAX HD features are able to be used. Im very upset about this because I particularly bought this card for the cmss 3d. I really don't know if i will ever recommend another Creative Product to any of the people i do computer repair or gamer builds for, unless this gets resolved and the only way to resolve this is to get the cmss 3D to work. By the way I did do a full reinstall even with clean boot so that isn't the problem. I'm really upset and ready to return this product to Best Buy unless this can be resolved. Any admin that comes across this please send me any ways of getting a hold of anyone that can help. Tks and hope yall had a wonderful Thanksgiving.
Creatively toastedMessage Edited by toast on -24-200608:48 PM

Is there a Calendar App that works with both Blackberry phones and Android phones ?

I just recently got a Blackberry Z30 phone. My husband has an LG Optimus G Android phone. Does anyone know if there is a Calendar App that will work on both phones so that we can send appointments to each other that will load into our respective calendars? Right now, we each have to enter the events into our individual phones. I love the Blackberry Calendar (RIM) that came preloaded on my phone since you can customize recurrences, e.g. every 3 weeks plus you can have day, week and month views. I definitely want a calendar with the customizable recurrences feature, which my husband's Android Calendar App does not have. Thanks.
Solved!
Go to Solution.

You Both can Add one email Account on Both Phones and then sync the Calender With Email - This way when one will add a reminder or event it will automatically synced to the other
Regards Eree - Follow me on Twitter - Facebook - Google+
For More visit My Blog

Cannot get restricted command set to work with ACS 5.5 and HP Procurve switches - Can anyone assist?

I have AAA authentication working with no restrictions and I have TACACS working with command restrictions for my Cisco gear.

Hi... I have created a shell profile in Policy Elements -> Authorization and Permissions -> Device Administration -> Shell Profiles which has a assigned privilege level of 15 and a max privilege level of 15. Further to this I have added a new commands set via Policy Elements -> Authorization and Permissions -> Device Administration -> commands sets.
I have referenced the shell profile via Access Policies -> Access Services -> Default Device Admin -> Authorization. And this part of it seems to work fine, but the command set I am using to restrict the commands allowed is not being used...do I need to reference the command set somewhere else within the ACS platform as well? The configuration I have added on to the Network Device is as follows: -
aaa new-model
aaa authentication login default group tacacs+
aaa authentication enable default group tacacs+
aaa authorization config-commands
aaa authorization exec default group tacacs+ local
aaa authorization commands 15 default group tacacs+ none
Can you advise what it is I am missing?

Unity 5 with MS Exchange 2007 and Windows Server 2003 Ent w/ SP2

Hello,
We have Unity 5 with Exchange 2007 SP1 on Windows 2003 SP1 Enterprise server. We want to upgrade Exchange to SP2 or SP3 but I could not find enough information, may not have looked in right places.
Does anyone have Unity with Exchange 2007 with SP2 or SP3? has anyone experienced issues with such upgrade?
Thanks,
Paresh.

Paresh,
Here's what you need:
Recommended Service Packs—Message Store
Revised October 25, 2010
•Exchange 2010 Service Pack 1
•Exchange 2007 Service Pack 3
For support information, refer to the "Support Policy for Microsoft Service Packs and Updates" section of Supported Hardware and Software, and Support Policies for Cisco Unity Release 5.x at http://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_installation_guides_list.html.
I pulled this straight from a Cisco document so you could be sure that you are moving to the latest recommended SP for Exchange which is SP3. I have clients running this SP without issue.
Hailey
Please rate helpful posts!

Can I work with both Versions 2 and 3 ?

I have a Powerbook laptop and G5 desktop (both pre- intel) running version 2 of LR.
I have ordered a new intel Mac and thinking of installing LR3 on it.
My Lightroom dbase and image files are on an external Hard Disc Drive, for mobility purposes.
I want to be able to work on all 3 computers with LR.
The way I see it I am stuck with version 2 or is there a way to use both?
As soon as I update my database to 3, Will it no longer work on 2 ?

It often makes more sense to read the license agreement yourself than assume others have and will accurately reflect it in their response.
I have attached a copy of the EULA and provided some extracts below. You'll note that continued use of the earlier version is permitted under certain circumstances.
Extracts from Lightroom 3 license
2. Software License. If you obtained the Software from Adobe or one of its authorized licensees and as long as you comply with the terms of this agreement, Adobe grants you a non-exclusive license to use the Software in the manner and for the purposes described in the Documentation, as further set forth below. See Section 14 for specific provisions related to certain components.
2.1 General Use. You may install and use one copy of the Software on up to the Permitted Number of your compatible Computers; or
2.2 Server Deployment. You may install the Permitted Number of copies of the Software on the Permitted Number of Computer file server(s) within your Internal Network for the purpose of downloading and installing the Software on up to the Permitted Number of Computers within the same Internal Network; or
2.3 Server Use. You may install the Permitted Number of copies of the Software on the Permitted Number of Computer file server(s) within your Internal Network only for use of the Software initiated by an individual through commands, data or instructions (e.g., scripts) from a Computer within the same Internal Network. The total number of users (not the concurrent number of users) permitted to use the Software on such Computer file server(s) may not exceed the Permitted Number. No other network use is permitted, including, but not limited to use of the Software, either directly or through commands, data or instructions, (i) from or to a Computer not part of your Internal Network, (ii) for enabling Internet or web hosted services, (iii) by any user not licensed to use the Software under a valid license from Adobe, (iv) as a component of a system, workflow or service accessible by more than the Permitted Number of users, or (v) for operations not initiated by an individual user (e.g., high-volume automated server processing of wire feed content); and
2.4 Portable or Home Computer Use. The primary user of the Computer on which the Software is installed may install a second copy of the Software for his or her exclusive use on either a portable Computer or a Computer located at his or her home, provided the Software on the portable or home Computer is not used at the same time as the Software on the primary Computer.
2.5 Backup Copy. You may make a reasonable number of backup copies of the Software, provided your backup copies are not installed or used for other than archival purposes.
The policy for upgrades is
5 . Updates. If the Software is an upgrade or update to a previous version of Adobe software, you must possess a valid license to such previous version in order to use such upgrade or update. After you install such update or upgrade, you may continue to use any such previous version in accordance with its end-user license agreement only if (a) the upgrade or update and all previous versions are installed on the same device, (b) the previous versions or copies thereof are not transferred to another party or device unless all copies of the update or upgrade are also transferred to such party or device and (c) you acknowledge that any obligation Adobe may have to support the previous version(s) may be ended upon the availability of the upgrade or update. No other use of the previous version(s) is permitted after installation of an update or upgrade.Upgrades and updates may be licensed to you by Adobe with additional or different terms.
"Computer" means a computer device that accepts information in digital or similar form and manipulates it for a specific result based on a sequence of instructions.
"Internal Network" means a private, proprietary network resource accessible only by employees and individual contractors (i.e., temporary employees) of a specific corporation or similar business entity. Internal Network does not include the Internet or any other network community open to the public, such as membership or subscription driven groups, associations and similar organizations.
"Permitted Number" means one (1) unless otherwise indicated under a valid license (e.g., volume license) granted by Adobe.
Full License is appended below

SPA 122 stops working with both PHONE 1 and 2 lights flashing

Hi,
We have hundreds of units deployed and we start having complaints that the line isn't working anymore while the unit does register with our server. Any calls going to the ATA gets a USER_BUSY condition like if a line was offhook but that's not the case.
Anyone had this condition? I am running 1.3.1(003).
One common thing so far is the fact those users do faxing but we ruled out config since we enable T.38 on all of them regardless.
Since the unit registers, we can't rely on the REGISTRATION too much so would like a way to figure out if the unit is healthy or not.
Thanks,
Benoit

Please update to 1.3.2(014) and see if this resolves the issue.
http://software.cisco.com/download/release.html?mdfid=283998793&softwareid=282463187&release=1.3.2&relind=AVAILABLE&rellifecycle=&reltype=latest

Getting your wireless router to work with the mini computers and their small monitors

I have one on the new Dell Mini computers. I purchased the Wireless-G Broadband Router model #WRT54G2 and had the most difficult time getting Network Magic installed on the Mini because the monitor was too small for the required resolution (1024x768) - this was trying to install via the CD that came with the router.
The solution to this problem:
1) Use the CD to install the Router and Network Magic on your desktop (or wherever you are hardwired to the internet).
2) Open Network Magic; go to "Status" and download the newest version of Network Magic to your desktop.
3) DO NOT use the CD to install Network Magic on the Mini. Instead - Unplug your hardwire connection from your desktop and connect it to your Mini. Go to "linksysbycisco.com/us/en/support/WRT54G2/download" and install the newest version of Network Magic on your Mini.
4) Replug your hardwire connection into your desktop.
5) You can now use Network Magic from your desktop to add the mini to the network. Go to "Tasks" and then "Add a device." You will be able to follow the directions at this point.
The only other issue I found was naming the network. I had to name the desktop and the mini the same name otherwise it wouldn't connect.
Good Luck and hopefully it won't take you the three days it took me to figure this out.

Hi i have a Router WRT 54 G2 v1, when i want to connect it wireless to my new mini, He is asking me to enter a Security key !
i don't know how to get that Code, anyone would have an answer for me ?
Thank you

Video not working with both 6.21 and 6.22 versions

Hello All,
I am having problem with my Skype video call. When I try to call, instead of video, the attached image is shown! Does anyone have similar problem?? How can I solve this!
Thanks in advance!.
Solved!
Go to Solution.
Attachments:
skype.PNG ‏47 KB

Camera plus is not a webcam, it's virtual camera software. That actual image is generated by that software, not skype. You should have another option to select a real webcam. If that still doesn't work, provide a DirectX diagnostic log and any other further details when you select a webcam that is not "Camera plus".
Please, run the DirectX diagnostics tool (32-bit). Run dxdiag.exe (Start - Run or Win key +R) then press enter or click "OK". Once the diagnostics completes, "Save All information..." to a text file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.
(i.e. compress DxDiag.txt ---> DxDiag.zip)

Front row doesn't work with both apple+esc and remote

My new macbook can't open front row, not with the remote, and with apple+esc, could it be a file that i have to delete and then restart the computer and that that file automatic comes back??

If, for whatever reason, Front Row isn't in that location, you'll have to re-install it. This shouldn't be a big deal except I'd be a little curious to know why it disappeared...
Insert your original Mac OS X install disk that came with your Mac. You do not need to startup from the disk. Double-click on the "Install Bundled Software Only" option on the disk. At the "Installation Type" window of this installer, click the "Customize" button. This will give you a list of software to check on or check off. Check on the option for Front Row but uncheck everything else (unless there's something else missing that you need!). Run the installer and this should put Front Row back in its proper location. Depending on which version gets installed, you may wan to run the Software Update to make sure Front Row is up-to-date.
-Doug

Getting IMAP on iPhone to work with Cisco voicemail / IMAP server

Have an iPhone 3G on 2.0 and trying to get an IMAP connection to a Cisco Unity Express that is a Linux based voicemail server and IMAP server (for voicemail to email). I setup the account per the best I could and I can get the iPhone to reach the IMAP server but never see any mails - the message on the iPhone is:
"Cannot Get Mail
the connection to the server gsm.cue.com failed"
Not sure of what the issue - here are logs from my IMAP server if that helps any - I know its not an authentication issue as that part seems to pass
3502 09/09 09:14:07.651 IMP CMD 269422607 (Recv 10.1.1.12) 15 STATUS INBOX (UNSEEN)
3502 09/09 09:14:07.657 IMP CLH 269422607 com.cisco.aesop.imap4.Imap4ServerConnectionHandlerImpl:TotalMsgCount: 1
3502 09/09 09:14:07.662 IMP CLH 269422607 com.cisco.aesop.imap4.Imap4ServerConnectionHandlerImpl:RecentMsgCount:1
3502 09/09 09:14:07.668 IMP CLH 269422607 com.cisco.aesop.imap4.Imap4ServerConnectionHandlerImpl:FirstUnseenMessage: 1
3502 09/09 09:14:07.674 IMP CLH 269422607 com.cisco.aesop.imap4.Imap4ServerConnectionHandlerImpl:NextUID: 6
3502 09/09 09:14:07.679 IMP CLH 269422607 com.cisco.aesop.imap4.Imap4ServerConnectionHandlerImpl:UIDValidity: 20341232
3502 09/09 09:14:07.682 IMP CMD 269422607 (Sent 10.1.1.12) * STATUS INBOX (UNSEEN 1)
15 OK completed
3502 09/09 09:14:08.005 IMP CMD 269422607 (Recv 10.1.1.12) 16 UID SEARCH
3502 09/09 09:14:08.007 IMP CMD 269422607 (Sent 10.1.1.12) 16 NO Failed parsing search request (string length is null)
3502 09/09 09:14:27.612 IMP CMD 269422607 (Recv 10.1.1.12) 17 NOOP
3502 09/09 09:14:27.613 IMP CMD 269422607 (Sent 10.1.1.12) 17 OK completed
Any idea on what the UID search is (10.1.1.12 is the iPhone IP address)
Thanks
maulik

I got this to work! My Unified Messaging Service was originally setup to Specify an Exchange Server. That is where I had put the DNS name of the CAS server (and that DNS entry pointed to several CAS servers). I changed the Service to Search for Exchange Servers instead and used that same DNS name in the Active Directory DNS Domain Name. When I do the test of this service, it tells me it Failed to locate a Domain Controller via DNS, but that is just informational. It also says it successfully connected to the Exchange CAS server with the autodiscover.xml. Now my mailboxes on both Exchange 2007 and 2010 are able to receive voicemail messages with this one Service configured.

I recently bought a new macbook pro and set it up using the migration assistant and my mac mini. I can't get the text message forwarding feature to work with both computers.

I recently bought a new macbook pro and set it up using the migration assistant from my mac mini. I can't get the text message forwarding feature to work with both computers. It keeps saying that I only have 2 devices setup, my iPad and my macbook pro. When I mess with the setting on my mac mini, it goes from saying that that is one of the devices to my macbook pro being the 2nd device. I think that something happened as a result of my using the migration assistant and now it thinks that my macbook pro and my mac mini are one and the same computer. Any ideas?

Thanks, Sig.
The old computer is a 2.6 Ghz Intel Core 2 Duo
The new one is a 2.3 GHz intel core i7
In going over this, thanks to "tallking it out" with you, I did discover the Text Edit problem. Because I've still been unable to get the new computer text size (fonts or whatever) to match the old computer, I did not notice that the curser is now different--the line midway down the curser has to be placed on the line I am working upon, otherwise the edits go elsewhere on the page. Now, with a bit of difficulty, I am able to get Text Edit to work correctly.
If you have any ideas as to why my menu bar and Text Edit type are still so slow, I'd love to have them.
(I went through the process you suggested earlier, re my Trackpad preferences, and found no improvement.)

Only one of my earbuds on my bose headphones works with my ipad, iphone and macbook- if I hold them there the right earbud will work, but for the life of me, I can't get them to both work. Why is this? And is Apple doing anything about this?

Only one of my earbuds on my bose headphones works with my ipad, iphone and macbook- if I hold them there the right earbud will work, but for the life of me, I can't get them to both work. Why is this? And is Apple doing anything about this? While Apple's headphones have (finally) admittedly gotten better of late, I still prefer the much more comfortable headphones & sound quality that Bose makes and that I spent the money for.

Bose Product Support

Getting UConn 8.5 to work with both Exchange 2007 and 2010

Similar Messages

Maybe you are looking for