Getting Updated image through Config manager Build and capture process

Hi guys,
Looking for some pointers on getting the almost fully patched image out of configuration manager build and capture process.
I need below pointers:
- What and where to advertise\deploy software packages target? since its a new deployment, I believe it should be targeted to all unknown computers.
- How many times should I call 'install update' step in TS and where?
- What is the best way to patch image (if something is missed out during image capture) offline (since its config manager 2012 R2). when I pull schedule update list for offline schedule, does that only pull updates that are required for that image or it
pulls everything available as updates?
- I have done offline patch of image but still once the image is deployed it pulls office updates. Looks like , offline service just injects OS patches..right?
Regards,
Regards,

- Where? That depends upon what you what. But, going by the letter of what you asked, you shouldn't deploy any applications or packages if you want them on your newly images systems, you should make them a part of the TS using Install Software and Install
Application tasks.
- How many times? You should only need one although depending upon what you are deploying and if you are using offline updates, some folks add more. I typically use two one right after the Setup Windows and ConfigMgr task (just like the task sequence wizard
builds for you) to update the OS and "things" in the image and one at the end to catch additional updates for apps and components added during the TS. Note that you also have to initiate an update scan cycle for additional install update tasks to work. Do
this by adding a run-command line task before the second Install Updates task with the proper WMIC incantation.
- Offline Updates only injects CBS updates into the image which are typically just core OS updates. You should also update your image though to include non-CBS updates. Using a build and catpure task sequence makes this easy.
Jason | http://blog.configmgrftw.com

Similar Messages

Install Updates task not working during Build and Capture in SCCM 2012

Working with a new SCCM 2012 installation.
We are trying to get a Build and Capture TS to install all updates for Win7SP1.
All packages are deployed to DP, build and cap machine is in a collection with all updates deployed to it. Agent installation parameters include "SMSMP" "SMSSLP" parameters. Machine is not being attached to the domain during OS install.
Updates can be pushed to existing domain machines, so obviously the updates themselves are working.
The task sequence works correctly to install the image, but "Install Updates" task just sits there and eventually times out. (No indication of updates being installed.) If this task is working, shouldn't I see a Downloading Updates progress bar, or was that
eliminated from 2012?

Same issue for me except I'm running 2012 R2 my B&C runs forever on Install Software Updates, eventually just rebooting and coming back to the login screen of Windows 7 without ever finishing the Install Updates.
Been working on it litteraly for weeks.
1- Tried adding .Net 4.52 as an application installation thinking maybe it would resolve the issue
2- Tried installing via Run Command Line + DISM all hotfixes that require 2 reboots as per (https://support.microsoft.com/en-us/kb/2894518)
3- Tried to simply REMOVE the same hotfixes from my Software Update Groups alltogether.
4- Injected all applicable software updates through Offline Servicing in the SCCM Console (Schedule Updates) on the Windows 7 DVD wim file. That way my logic was that once it would hit the Software Updates, there would be a lot less to install.
I'm at the point where I had to open a case with Microsoft Premier Support as of yesterday. So, nothing new to report yet. But yes, this is a true pain in the ***.
For the sake of comparison, I am running 4 Update Groups: one containing patches up to 2012. Another one for 2013, 2014 and 2015. I have patches for Windows 7 + Office of all categories except Service Packs.
If someone has any ideas, feel free to chime in.

Install Software Updates in a WIndows 7 build and capture shooses wrong SUP

Hi,
My environment is the following.
One SCCM 2012 R2 Primary site server in a trusted domain, MP, DP and SUP. This site is reachable from the clients on the internal network.
One SCCM 2012 R2 server in an untrusted forest, MP, DP and SUP. This server is NOT reachable from clients on the internal nrowotk.
I am doing a build and capture of Windows 7 using a SCCM TS on a VM on the internal network.
When the Install Updates task Is running the SCCM client is trying to use the SUP in the untrusted forest instead of the one in the local trusted forest.
How do I force the SCCM client to use the local SUP instead of the one in the untrusted forest.
According to
http://blogs.technet.com/b/configmgrteam/archive/2013/03/27/software-update-points-in-cm2012sp1.aspx it should prioritize the one in the local forest, but the build and capture PC is not member of the AD so it looks like it just uses the SUP that is
first in the list from the MP.
The blog also states that the SUP will not be shifted to the next one in the list before 4 failed scans at 30 minutes intervals so it will take more than 4 hours before the SCCM client will try the next SUP. At that time the TS has long finished the
Software Update task.
I thought about creating an entry in the hosts file on the capture PC with the name of the untrusted SUP and the IP of the trusted SUP to redirect the client to use the trusted SUP. I solution that might work but that I find very ugly.
What can I do to force the SCCM client on the build and capture PC to us the internal trusted SUP?
Thomas Forsmark Soerensen

The SUP info cannot be got from the Internal MP. Please review the Smsts.log file.
Juke Chou
TechNet Community Support

Build and Capture - waiting to install

I am using SCCM 2012 RTM and have started seeing an issue with our Build and Capture Task Sequence. When performing a build and capture the system will not install anything for a day or so and anything that is advertised to it gets stuck in a "Waiting
to Install..." status in the Software Center UI.
When looking at the execmgr log for the client I see the following items that stick out to me:
<![LOG[On policy activation ignore disabled policy Configuration Manager Client Upgrade Program]LOG]!><time="10:53:36.947+300" date="01-23-2013" component="execmgr" context="" type="2" thread="3956"
file="execreqmgr.cpp:7489">
<![LOG[Mandatory execution requested for program Configuration Manager Client Upgrade Program and advertisement CM120000]LOG]!><time="10:53:36.947+300" date="01-23-2013" component="execmgr" context="" type="1"
thread="2512" file="execreqmgr.cpp:3533">
<![LOG[Creating mandatory request for advert CM120000, program Configuration Manager Client Upgrade Program, package CM100003]LOG]!><time="10:53:36.947+300" date="01-23-2013" component="execmgr" context=""
type="1" thread="2512" file="execreqmgr.cpp:3658">
<![LOG[Program Configuration Manager Client Upgrade Program change to state WAITING_ENABLED]LOG]!><time="10:53:36.979+300" date="01-23-2013" component="execmgr" context="" type="1" thread="2512"
file="executionrequest.cpp:4618">
<![LOG[Execution Request for advert CM120000 package CM100003 program Configuration Manager Client Upgrade Program state change from NotExist to WaitingDisabled]LOG]!><time="10:53:36.979+300" date="01-23-2013" component="execmgr"
context="" type="1" thread="2512" file="executionrequest.cpp:503">
<![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="CM100003",ProgramID="Configuration Manager Client Upgrade Program", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="10:53:36.979+300"
date="01-23-2013" component="execmgr" context="" type="1" thread="2512" file="event.cpp:410">
<![LOG[Policy arrived for child program insNCR-MPOSUIControls-1.0]LOG]!><time="10:57:50.240+300" date="01-23-2013" component="execmgr" context="" type="1" thread="3996" file="execreqmgr.cpp:6847">
<![LOG[Raising client SDK event for class NULL, instance NULL, actionType 6l, value , user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="10:57:50.287+300" date="01-23-2013" component="execmgr" context=""
type="1" thread="3956" file="event.cpp:410">
<![LOG[Mandatory execution requested for program * and advertisement CM120006]LOG]!><time="10:57:50.865+300" date="01-23-2013" component="execmgr" context="" type="1" thread="3956" file="execreqmgr.cpp:3533">
<![LOG[Raising client SDK event for class NULL, instance NULL, actionType 6l, value , user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="10:57:51.037+300" date="01-23-2013" component="execmgr" context=""
type="1" thread="3996" file="event.cpp:410">
<![LOG[Creating mandatory request for advert CM120006, program *, package CM10001F]LOG]!><time="10:57:51.053+300" date="01-23-2013" component="execmgr" context="" type="1" thread="3956"
file="execreqmgr.cpp:3658">
<![LOG[Policy arrived for child program insRCS-FLIB_2_PlatformRuntime-5.5.5007]LOG]!><time="10:57:51.084+300" date="01-23-2013" component="execmgr" context="" type="1" thread="3996" file="execreqmgr.cpp:6847">
<![LOG[The created request is a Task Sequence request]LOG]!><time="10:57:51.115+300" date="01-23-2013" component="execmgr" context="" type="1" thread="3956" file="execreqmgr.cpp:1065">
<![LOG[Execution Request for advert CM120006 package CM10001F program * state change from NotExist to WaitingDependency]LOG]!><time="10:57:51.678+300" date="01-23-2013" component="execmgr" context="" type="1"
thread="3956" file="executionrequest.cpp:503">
<![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="CM10001F",ProgramID="*", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="10:57:51.678+300"
date="01-23-2013" component="execmgr" context="" type="1" thread="3956" file="event.cpp:410">
<![LOG[An existing MTC token was not supplied, using ExecutionRequest's Id as MTC token and this execution request is the owner of resultant MTC task.]LOG]!><time="10:57:52.443+300" date="01-23-2013" component="execmgr"
context="" type="1" thread="3956" file="executionrequest.cpp:8829">
<![LOG[Request a MTC task for execution request of package CM10001F, program * with request id: {7BCB5674-DC91-49D8-9C52-0765E9D86984}]LOG]!><time="10:57:52.443+300" date="01-23-2013" component="execmgr" context=""
type="1" thread="3956" file="executionrequest.cpp:8848">
<![LOG[Execution Request for advert CM120006 package CM10001F program * state change from WaitingDependency to Ready]LOG]!><time="10:57:52.443+300" date="01-23-2013" component="execmgr" context="" type="1"
thread="3956" file="executionrequest.cpp:503">
<![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="CM10001F",ProgramID="*", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="10:57:52.443+300"
date="01-23-2013" component="execmgr" context="" type="1" thread="3956" file="event.cpp:410">
<![LOG[MTC task with id {7BCB5674-DC91-49D8-9C52-0765E9D86984}, changed state from 0 to 1]LOG]!><time="10:57:52.443+300" date="01-23-2013" component="execmgr" context="" type="1" thread="2932"
file="execreqmgr.cpp:6268">
<![LOG[Raising client SDK event for class NULL, instance NULL, actionType 6l, value , user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="10:57:52.959+300" date="01-23-2013" component="execmgr" context=""
type="1" thread="3996" file="event.cpp:410">
<![LOG[Policy arrived for child program insRCS-Software_Retrieval_Agent_TAB-5.4.1]LOG]!><time="10:57:53.053+300" date="01-23-2013" component="execmgr" context="" type="1" thread="3996"
file="execreqmgr.cpp:6847">
<![LOG[MTC queeued a task for SWD execution request with program id: *, package id: CM10001F for execution.]LOG]!><time="10:57:53.068+300" date="01-23-2013" component="execmgr" context="" type="1"
thread="2932" file="execreqmgr.cpp:6481">
<![LOG[Package CM10001F, program * is ready but can not be started because package , program is currently running.]LOG]!><time="10:57:53.068+300" date="01-23-2013" component="execmgr" context=""
type="1" thread="2932" file="executionrequest.cpp:9083">
When I use the same Task Sequence (or any other deployment) on a system built from our old .WIM created with the same Build and Capture Task Sequence they always install immediately. I am thinking it has something to do with the default SCCM Client
upgrade package available by default, but I had our SCCM owner verify that has been disabled in the hierarchy.
The deployments are set to ignore maintenance windows and things of that nature. It appears to be an issue with the agents state when it comes up out of the build process. It checks in with the Site and processes assignments for Compliance (DCM)
without issues as well. The build and capture new WIM/System builds just seem to not want to install anything.
What makes this issue even more odd is that if I leave the system on for several days sitting at the "Waiting to Install..." state, the agent finally works out whatever issue it is stuck on and begins to work without issues. If I don't use
the WIM for several days after it was created, the WIM will also stop experiencing the issue too.
Has anyone else run into this too? This was working a couple months back and I went to create a new WIM in December and it hasn't work correctly since.
Thanks..Jon
Jon Kaloz

I have identified the source of the problem, but no solution yet. The blocking program is found under SMS_MaintenanceTaskRequests in the local client WMI Namespace Root\CCM\SMS_MaintenanceTaskRequests. The GUID that is found in there has
a matching TaskID to a TaskID found in the SMSTS from the Build and Capture Task Sequence logs.
This is found in the SMSTSLog from the Build and Capture process showing the same Task GUID referenced (followed by a failure I cannot find good info on). C:\SMSTSLog\SMSTS.log
<![LOG[Set command line: "C:\_SMSTaskSequence\OSD\CM100035\ccmsetup.exe" /useronly /source:C:\_SMSTaskSequence\OSD\CM100035 /config:MobileClient.TCF /status:644]LOG]!><time="14:21:37.225+300" date="01-24-2013" component="OSDSetupHook"
context="" type="0" thread="2132" file="commandline.cpp:705">
<![LOG[Executing command line: "C:\_SMSTaskSequence\OSD\CM100035\ccmsetup.exe" /useronly /source:C:\_SMSTaskSequence\OSD\CM100035 /config:MobileClient.TCF /status:644]LOG]!><time="14:21:37.225+300" date="01-24-2013"
component="OSDSetupHook" context="" type="1" thread="2132" file="commandline.cpp:801">
<![LOG[Process completed with exit code 0]LOG]!><time="14:23:30.568+300" date="01-24-2013" component="OSDSetupHook" context="" type="1" thread="2132" file="commandline.cpp:1098">
<![LOG[Install succeeded. Blocking other instances of ccmsetup.]LOG]!><time="14:23:30.568+300" date="01-24-2013" component="OSDSetupHook" context="" type="0" thread="2132" file="installclient.cpp:1215">
<![LOG[Installed Client]LOG]!><time="14:23:30.568+300" date="01-24-2013" component="OSDSetupHook" context="" type="0" thread="2132" file="installclient.cpp:1273">
<![LOG[Start to cleanup TS policy]LOG]!><time="14:23:30.568+300" date="01-24-2013" component="OSDSetupHook" context="" type="0" thread="2132" file="utils.cpp:2773">
<![LOG[TS Deleted 0 instances]LOG]!><time="14:23:30.600+300" date="01-24-2013" component="OSDSetupHook" context="" type="0" thread="2132" file="utils.cpp:2816">
<![LOG[TS Policy cleanup done]LOG]!><time="14:23:30.600+300" date="01-24-2013" component="OSDSetupHook" context="" type="0" thread="2132" file="utils.cpp:2817">
<![LOG[End TS policy cleanup]LOG]!><time="14:23:30.600+300" date="01-24-2013" component="OSDSetupHook" context="" type="0" thread="2132" file="utils.cpp:2821">
<![LOG[Setting variable to indicate a client installation was done]LOG]!><time="14:23:30.600+300" date="01-24-2013" component="OSDSetupHook" context="" type="0" thread="2132" file="installclient.cpp:1284">
<![LOG[Registering the task sequence with the execution manager in the newly installed operating system.]LOG]!><time="14:23:30.615+300" date="01-24-2013" component="OSDSetupHook" context="" type="0"
thread="2132" file="installclient.cpp:915">
<![LOG[Active request handle is empty, registering with new active request handle. This is expected if the TS was started from a media/PXE.]LOG]!><time="14:23:30.615+300" date="01-24-2013" component="OSDSetupHook"
context="" type="2" thread="2132" file="installclient.cpp:918">
<![LOG[Saving the new active request handle for the task sequence: {01DE9356-CDBD-4051-B465-F87886A61BF5}]LOG]!><time="14:23:30.615+300" date="01-24-2013" component="OSDSetupHook" context="" type="1"
thread="2132" file="installclient.cpp:931">
<![LOG[Failed to create instance for IMTCTokenHandler interface, hr=0x80070005]LOG]!><time="14:23:30.662+300" date="01-24-2013" component="OSDSetupHook" context="" type="0" thread="2132"
file="installclient.cpp:949">
<![LOG[Waiting for ccmexec process to start]LOG]!><time="14:23:30.662+300" date="01-24-2013" component="OSDSetupHook" context="" type="0" thread="2132" file="installclient.cpp:950">
<![LOG[CoCreateInstance succeeded]LOG]!><time="14:24:00.678+300" date="01-24-2013" component="OSDSetupHook" context="" type="0" thread="2132" file="installclient.cpp:961">
<![LOG[Succesfully registered the tasksequence with the execution manager]LOG]!><time="14:24:00.678+300" date="01-24-2013" component="OSDSetupHook" context="" type="1" thread="2132" file="installclient.cpp:994">
<![LOG[Command line for extension .exe is "%1" %*]LOG]!><time="14:24:01.693+300" date="01-24-2013" component="OSDSetupHook" context="" type="0" thread="2132" file="commandline.cpp:228">
<![LOG[Set command line: "C:\Windows\system32\_SMSOSDSetup\TsProgressUI.exe" /Unregister]LOG]!><time="14:24:01.693+300" date="01-24-2013" component="OSDSetupHook" context="" type="0" thread="2132"
file="commandline.cpp:705">
<![LOG[Executing command line: "C:\Windows\system32\_SMSOSDSetup\TsProgressUI.exe" /Unregister]LOG]!><time="14:24:01.693+300" date="01-24-2013" component="OSDSetupHook" context="" type="1"
thread="2132" file="commandline.cpp:801">
<![LOG[==========[ TsProgressUI started in process 3912 ]==========]LOG]!><time="14:24:01.850+300" date="01-24-2013" component="TsProgressUI" context="" type="1" thread="3956" file="winmain.cpp:329">
<![LOG[Unregistering COM classes]LOG]!><time="14:24:01.850+300" date="01-24-2013" component="TsProgressUI" context="" type="1" thread="3956" file="winmain.cpp:204">
<![LOG[Shutdown complete.]LOG]!><time="14:24:01.850+300" date="01-24-2013" component="TsProgressUI" context="" type="1" thread="3956" file="winmain.cpp:512">
<![LOG[Process completed with exit code 0]LOG]!><time="14:24:01.850+300" date="01-24-2013" component="OSDSetupHook" context="" type="1" thread="2132" file="commandline.cpp:1098">
<![LOG[Successfully unregistered TS Progress UI.]LOG]!><time="14:24:01.850+300" date="01-24-2013" component="OSDSetupHook" context="" type="1" thread="2132" file="utils.cpp:2075">
<![LOG[Moving logs to SMS client directory]LOG]!><time="14:24:01.850+300" date="01-24-2013" component="OSDSetupHook" context="" type="1" thread="2132" file="basesetuphook.cpp:1356">
<![LOG[LOGGING: Resetting log path.]LOG]!><time="14:24:01.850+300" date="01-24-2013" component="OSDSetupHook" context="" type="1" thread="2132" file="tslogging.cpp:1803">
These are the contents of the maintenancecoordinator.log showing the Task with the same GUID starting, but never registering a completion. After 12 hours (43200 second timeout) it will finally continue on and work as it should.
<![LOG[Removing tasks for agent "RebootCoord".]LOG]!><time="14:23:46.662+300" date="01-24-2013" component="MaintenanceCoordinator" context="" type="1" thread="536" file="taskqueue.cpp:727">
<![LOG[Removing tasks for agent "RebootCoord".]LOG]!><time="14:23:55.912+300" date="01-24-2013" component="MaintenanceCoordinator" context="" type="1" thread="4084" file="taskqueue.cpp:727">
<![LOG[Adding task for client "tasksequence": id - "{01DE9356-CDBD-4051-B465-F87886A61BF5}", pri - 0, service window - 0, max time for sw - 43200.]LOG]!><time="14:24:00.678+300" date="01-24-2013" component="MaintenanceCoordinator"
context="" type="1" thread="2556" file="taskqueue.cpp:259">
<![LOG[Signaled task '{01DE9356-CDBD-4051-B465-F87886A61BF5}' (agent 'tasksequence').]LOG]!><time="14:24:00.678+300" date="01-24-2013" component="MaintenanceCoordinator" context="" type="1" thread="2556"
file="taskqueue.cpp:1344">
<![LOG[Done scheduling task. Winning task '{01DE9356-CDBD-4051-B465-F87886A61BF5}' (agent 'tasksequence')]LOG]!><time="14:24:00.678+300" date="01-24-2013" component="MaintenanceCoordinator" context="" type="1"
thread="2556" file="taskqueue.cpp:1261">
<![LOG[Task "{01DE9356-CDBD-4051-B465-F87886A61BF5}" (agent 'tasksequence') is reporting back on starting.]LOG]!><time="14:24:00.678+300" date="01-24-2013" component="MaintenanceCoordinator" context=""
type="1" thread="2556" file="taskqueue.cpp:399">
<![LOG[Successfully started task '{01DE9356-CDBD-4051-B465-F87886A61BF5}' (agent 'tasksequence').]LOG]!><time="14:24:00.678+300" date="01-24-2013" component="MaintenanceCoordinator" context="" type="1"
thread="2556" file="taskqueue.cpp:1517">
<![LOG[Removing tasks for agent "RebootCoord".]LOG]!><time="14:27:36.544+300" date="01-24-2013" component="MaintenanceCoordinator" context="" type="1" thread="2464" file="taskqueue.cpp:727">
<![LOG[Removing tasks for agent "RebootCoord".]LOG]!><time="14:53:27.219+300" date="01-24-2013" component="MaintenanceCoordinator" context="" type="1" thread="3820" file="taskqueue.cpp:727">
I am not sure why the task is still hanging around on the system after the build and capture sequence completes. There are no errors during the B&C TS and I have removed everything from it as well to only be an OS install with no changes.
Jon Kaloz

Build and Capture

I am deploying Windows 7( 64 bit) Via SCCM 2012. It was working fine but last weekend as i wanted to update our image, tried todo a build and capture its failing at "Prepare ConfigMgr Client. The client cache is currently in use by a running program
or by a download in progress. (Error: 87D01203; Source: CCM)" I have switched off Updates and it worked fine. I have tried to search for this errors but for the life of me unable to find answer for it so far.
Has any once come across this issue and fixed? please let me know.
Thanks
Hassan

Hi Jorgen,
Yes I am installing applications in Build and Capture. What i did this morning was, I turned off Updates and did a build and capture with Apps installation only and it worked fine. Then i switched off Applications installation part of it and turned
on Updates and it worked too. The strange thing that i saw over the weekend was that : The first time around it detects 135 updates for Windows 7, installs them and reboot the machine, then i have put in another update task just in case if there are any missing
updates. It said that there were 127 Updates missing. Then downloads them with in a minute or so. Doesn't really installs them as it goes to reboot the machine and then continues on with the rest of TS.
Today when i was testing with it just updates, second time around it detected only 6 updates, downloaded and installed them as per normal and continued on with the rest of TS.
Could it be that an update that was applicable didnt get downloaded properly on to the server?
I am in the process of doing a Build and capture with both Updates and applications turned on. Will update this post once its done.
Thanks alot for your reply though.
Hassan

Installing Visual Studio runtimes on Build and Captures

Greetings,
I was just wondering how many of you out there install all Visual Studio runtimes in your base OS builds as part of you build and capture process. This would be the following four:
VC2005, VC2008, VC2010, VC2012 Update 4.
I'm thinking that there are so many apps these days that tend to use one or other of these versions that you might as well include them all. Is there a downside to doing this (apart from the increased OS build file size?).
Thanks
David Z

Yes. The Microsoft Visual C++ Runtime redistributable package install runtime components of Visual C++ Libraries required to run applications developed with Visual C++. They are not related to Windows.
If you deploy a x86 application on Windows 7 x64, it will require the x86 of Visual C++ Runtime.
If you deploy a x64 application on Windows 7 x64, it will require the x64 of Visual C++ Runtime.
A x86 application cannot use a x64 runtime. So yes you may need them in your image
/ Yannick Plavonil
blog: Deploiement Windows
twitter: @yplavonil
facebook:
www.facebook.com/deploiementwindows

Can't add music my iPhone from iTunes. When I try to drag a song over to my phone, I get the circle w/ the syncing line through it, but it does not update/load. [Manually manage music and videos] is checked. And, this is the only Mac I have ever used to

Can't add music my iPhone from iTunes.
When I try to drag a song over to my phone, I get the circle w/ the syncing line through it, but it does not update/load.
[Manually manage music and videos] is checked. And, this is the only Mac I have ever used to add music to my phone.
Also, just updated the phone's software today, and iTunes' software is already up to date.

Hi Gregg,
Have you tried resetting the device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the Home screen redisplays, see if your Music app is behaving normally.
Cheers,
GB

Build and Capture TS fails in "Prepare Configuration Manager Client" task

I have a ConfigMgr 2012 R2 + CU1 I use for Windows 7 deployment.
I have made a "build and Capture" TS in ConfigMgr that I use to build my reference image.
When I run the TS it fails at the "Prepare Configuration Manager Client" step where I get the following error:
The task sequence execution engine failed executing the action (Prepare Configuration Manager Client) in the group (Capture the Reference Machine) with the error code 2147749938
Action output: ... 1 instance(s) of 'SMS_MaintenanceTaskRequests' successful
Successfully reset Registration status flag to "not registered"
Successfully disabled provisioning mode.
Start to cleanup TS policy
getPointer()->ExecQuery( BString(L"WQL"), BString(pszQuery), lFlags, pContext, ppEnum ), HRESULT=80041032 (e:\nts_sccm_release\sms\framework\core\ccmcore\wminamespace.cpp,463)
ns.Query(sQuery, &spEnum), HRESULT=80041032 (e:\qfe\nts\sms\framework\tscore\utils.cpp,3666)
End TS policy cleanup
TS::Utility::CleanupPolicyEx(false), HRESULT=80041032 (e:\nts_sccm_release\sms\client\osdeployment\preparesmsclient\preparesmsclient.cpp,564)
pCmd->Execute(), HRESULT=80041032 (e:\nts_sccm_release\sms\client\osdeployment\preparesmsclient\main.cpp,136)
Wmi query 'select *from CCM_Policy where PolicySource = 'CcmTaskSequence'' failed, hr=0x80041032
Failed to delete policies compiled by TaskSequence (0x80041032)
Failed to prepare SMS Client for capture, hr=80041032
Failed to prepare SMS Client for capture, hr=80041032. The operating system reported error 2147942402: The system cannot find the file specified.
If I disable the "Install Software Updates" part of my TS it will run without probems. It installs 154 updates during the build.
I have seen another reference to this problem on this forum but why should the large number of the updates be the reason why the task sequcens cannot prepare the SCCM client for capture.
Sounds to me that it's a BUG :-(
Thomas Forsmark Soerensen

I'm glad I'm not the only one running into this. I've been racking my brain for the past few days trying to figure out where I went wrong.
SCCM 2012 R2 CU1
Installation properties in TS: SMSMP=mp.f.q.d.n FSP=mp.f.q.d.n DNSSUFFIX=f.q.d.n PATCH="%_SMSTSMDataPath%\Packages\AP200003\hotfix\KB2882125\Client\x64\configmgr2012ac-sp1-kb2882125-x64.msp;%_SMSTSMDataPath%\Packages\AP200003\hotfix\KB2905002\Client\x64\configmgr2012ac-r2-kb2905002-x64.msp;%_SMSTSMDataPath%\Packages\AP200003\hotfix\KB2938441\Client\x64\configmgr2012ac-r2-kb2938441-x64.msp"
Drop Windows 7 WIM that has all the updates Schedule Updates (offline servicing) installed (169 of 277)
Apply several updates offline (the dual-reboot Windows 7 updates among others)
Run Windows Updates more than once to be sure I get everything
Breaks at the preparing client for capture step
Is this:
a bug?
a known issue
something that's just frowned upon for no technical reason?
I'd love to hear from an SCCM guru [at Microsoft] on what the heck is going on here.

Problem in getting the image through URL

hi all,
I facing the problem,Inwhich i am unable find the solution...I am using the following code to display the image
public void doGet(HttpServletRequest request,HttpServletResponse response)
                    throws IOException, ServletException {
               int data=0;
               response.setContentType("image/png");
               ServletOutputStream out = response.getOutputStream();
               String file = request.getContextPath()+imageNames[0];
               //String file = "C:/Program Files/Apache Group/Tomcat 4.1/webapps/ImageComm/WEB-INF/images"+imageNames[index];
               BufferedInputStream in = new BufferedInputStream(new FileInputStream(file));
               System.out.println("the size of the inputStream is..."+in.available());
               System.out.println("the context path is..."+request.getContextPath());
               while ((data = in.read()) != -1) {
               out.write(data);
with the above i am not getting any error at the compile time but it was giving exception like FileNotFoundException.
but the same thing(URL address) when i am copying on the browser it was displayig the image.
(what might be the reason)
one more thing when i commented on the url address and try to use the actual realpath address it was displaying the image with out any problem
can anybody give me the solution like where to keep my images by which i can able to get the images through url address
thanks in advance
lakshman

hi all,
I am getting the image from the server.but the problem is i am getting the Exception as ArrayOutOfBound exception.
It was displaying the Image for the first time.and when ever it was going for the second time in to the paint method it was displaying the IOException in reading the stream from the connection.
can anybody give me the solution in rectifying that exception.
thanks in advance
lakshman

I got a new Ipad 2 and I am trying to get it work in vain. I have downloaded the iTunes on my PC, but even after executing the program nothing happens to the IPAD. I still get the image of the USB cable and the iTunes logo. What am I doing wrong?

I got a new Ipad 2 and I am trying to get it work in vain. I have downloaded the iTunes on my PC, but even after executing the program nothing happens to the IPAD. I still get the image of the USB cable and the iTunes logo. What am I doing wrong?

You know that you have to connect the iPad to your PC with the cable that came with it - and then iTunes should start automatically and it will guide you through the set up process?
If you have already tried to connect the iPad - and you have launched iTunes - and you still have no luck - reboot your PC and then begin the process again.

How to manage pulp and paper processing through SAP

Hi...
please let me know how to manage pulp and paper processing through SAP-PP in details......
or please provide sum links where i can get the solution....
regards,
sandeep.

Hi Ema,
you need to ensure in your BAdi implementation that the records do not overlap. Ideally (for performance reasons) you also keep the number of records in RPM_BUPA_AVL low
i.e. one record for 01.Jan to 05 Jan with 8 hours is better compared to 5 records with 8 hours each.
Best regards
Thorsten

Install Updates step fails in Build and Capture (error code 87D00272)

Hello,
I was really hoping someone could help me with this.
Background information:
- We have a CM07 server in a production environment.
- I've set up a CM12 RTM server, following the guides in this forum, with the hopes of migrating soon.
- I wanted to do OSD from scratch to learn more and to take advantage of new features in CM12.
- I have a few virtual machines running for testing OSD/apps (these are the only clients managed by my CM12 server).
- Since it's not possible to have two WDS servers running at the same time AFAIK (without using registry tweaks, the F11 trick, that by the
way doesn't work for me) I have created a bootable TS media that I mount on the virtual machines whenever I want to test OSD.
Now, to my problem:
I can't figure out why my Build and Capture TS is failing on the Install Software Updates step. smsts.log file says: Failed
to RefreshUpdates, hr=087d00272, followed by: Failed to run the action: Install Software Updates. Component is disabled (Error: 87D00272; Source: CCM).
I have read about similar issues occurring in CM07 capture task sequences since the machine is joined to a Workgroup. The proposed solution was adding SMSSLP=FQDN to the client installation properties, but since that functionality is moved to the MP in CM12,
it should be enough to specify SMSMP=FQDN in my case. It's not working anyway. Tried it to a Deploy TS also, where the machine is domain joined, but I got the same error.
The error code 87D00272 returns no results on Google. This stumps me, as someone surely has had the same problem? Here are the relevant portions
of the smsts.log file
If someone had the chance to look at this, I would greatly appreciate it. Thank you!
Refreshing Updates InstallSWUpdate 2012-06-13 10:15:33 228 (0x00E4)
spInstall->RefreshTargetedUpdates( spCallback, &bAlreadyCompleted ),
HRESULT=87d00272 (e:\nts_sccm_release\sms\client\osdeployment\installswupdate
\installswupdate.cpp,467) InstallSWUpdate 2012-06-13 10:15:34 228 (0x00E4)
Failed to RefreshUpdates, hr=0x87d00272 InstallSWUpdate 2012-06-13 10:15:34 228
(0x00E4)
RefreshTargetedUpdates(spInstall, spCallback, bAlreadyCompleted), HRESULT=87d00272
(e:\nts_sccm_release\sms\client\osdeployment\installswupdate
\installswupdate.cpp,1295) InstallSWUpdate 2012-06-13 10:15:34 228 (0x00E4)
RefreshUpdates(), HRESULT=87d00272 (e:\nts_sccm_release\sms\client\osdeployment
\installswupdate\installswupdate.cpp,906) InstallSWUpdate 2012-06-13 10:15:34
228 (0x00E4)
InstallUpdates(pInstallUpdate, tType, sJobID, sActiveRequestHandle),
HRESULT=87d00272 (e:\nts_sccm_release\sms\client\osdeployment\installswupdate
\main.cpp,248) InstallSWUpdate 2012-06-13 10:15:34 228 (0x00E4)
Setting TSEnv variable SMSTSInstallUpdateJobGUID= InstallSWUpdate 2012-06-13
10:15:34 228 (0x00E4)
Process(pInstallUpdate, tType), HRESULT=87d00272 (e:\nts_sccm_release\sms\client
\osdeployment\installswupdate\main.cpp,304) InstallSWUpdate 2012-06-13 10:15:34
228 (0x00E4)
Process completed with exit code 2278556274 TSManager 2012-06-13 10:15:34
912 (0x0390)
---------! TSManager 2012-06-13 10:15:34 912 (0x0390)
Failed to run the action: Install Software Updates.
Component is disabled (Error: 87D00272; Source: CCM) TSManager 2012-06-13
10:15:34 912 (0x0390)
MP server http://CFGMGR-SRV.zenit.brummer.se. Ports 80,443. CRL=false. TSManager
2012-06-13 10:15:34 912 (0x0390)
Setting authenticator TSManager 2012-06-13 10:15:35 912 (0x0390)
Set authenticator in transport TSManager 2012-06-13 10:15:35 912 (0x0390)
Sending StatusMessage TSManager 2012-06-13 10:15:35 912 (0x0390)
Setting message signatures. TSManager 2012-06-13 10:15:35 912 (0x0390)
Setting the authenticator. TSManager 2012-06-13 10:15:35 912 (0x0390)
CLibSMSMessageWinHttpTransport::Send: URL: CFGMGR-SRV.zenit.brummer.se:80  CCM_POST
/ccm_system/request TSManager 2012-06-13 10:15:35 912 (0x0390)
Request was succesful. TSManager 2012-06-13 10:15:35 912 (0x0390)
Set a global environment variable _SMSTSLastActionRetCode=-2016411022 TSManager
2012-06-13 10:15:35 912 (0x0390)
Set a global environment variable _SMSTSLastActionSucceeded=false TSManager
2012-06-13 10:15:35 912 (0x0390)
Clear local default environment TSManager 2012-06-13 10:15:35 912 (0x0390)
Let the parent group (Setup Operating System) decides whether to continue execution
TSManager 2012-06-13 10:15:35 912 (0x0390)
The execution of the group (Setup Operating System) has failed and the execution has
been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows) TSManager 2012-06-13
10:15:35 912 (0x0390)
Failed to run the last action: Install Software Updates. Execution of task sequence
failed.
Component is disabled (Error: 87D00272; Source: CCM) TSManager 2012-06-13
10:15:35 912 (0x0390)
MP server http://CFGMGR-SRV.zenit.brummer.se. Ports 80,443. CRL=false. TSManager
2012-06-13 10:15:35 912 (0x0390)
Setting authenticator TSManager 2012-06-13 10:15:35 912 (0x0390)
Set authenticator in transport TSManager 2012-06-13 10:15:35 912 (0x0390)
Sending StatusMessage TSManager 2012-06-13 10:15:35 912 (0x0390)
Setting message signatures. TSManager 2012-06-13 10:15:35 912 (0x0390)
Setting the authenticator. TSManager 2012-06-13 10:15:35 912 (0x0390)
CLibSMSMessageWinHttpTransport::Send: URL: CFGMGR-SRV.zenit.brummer.se:80  CCM_POST
/ccm_system/request TSManager 2012-06-13 10:15:35 912 (0x0390)
Request was succesful. TSManager 2012-06-13 10:15:35 912 (0x0390)
Launching command shell. OSDSetupHook 2012-06-13 10:15:45 1932
(0x078C)
executing command: C:\WINDOWS\system32\cmd.exe /k OSDSetupHook 2012-06-13
10:15:45 1932 (0x078C)
executed command: C:\WINDOWS\system32\cmd.exe /k OSDSetupHook 2012-06-13
10:15:45 1932 (0x078C)
Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:
\nts_sccm_release\sms\client    asksequence    smanager    smanager.cpp,756) TSManager
2012-06-13 10:16:57 912 (0x0390)
Task Sequence Engine failed! Code: enExecutionFail TSManager 2012-06-13
10:16:57 912 (0x0390)
TSManager 2012-06-13 10:16:57 912 (0x0390)
Task sequence execution failed with error code 80004005 TSManager 2012-06-13
10:16:57 912 (0x0390)

I can add that I've looked at the Site Status in the Monitoring tab, and everything looks green apart from some Warnings about User and System Discovery. In Component Status, I have a warning about the Distribution Point on C$. I thought placing a NO_SMS_ON_DRIVE.SMS
file in the root of C: would mean no stuff was placed there? I can't see anything SCCM related, but it seems that it has placed a DP on C:?
The error message about DP is:
Distribution Manager has not tried to install IIS component of operating system to distribution point "["Display=\\CFGMGR-SRV.zenit.brummer.se\"]MSWNET:["SMS_SITE=PS1"]\\CFGMGR-SRV.zenit.brummer.se\". You should install and configure IIS manually. Please
ensure RDC is also enabled.

Install Software Updates Step fails during Build and Capture

I have run into a problem while attempting to use the Install Software Update task during a build and capture task sequence. I have MDT 2012U1 integrated into SCCM 2012.
The Install Software steps find and use the Deployment Points fine and the Use Toolkit steps similarly are able to download their source files from the distribution points using the Network Access account. The Install Software Updates step, however
fails with an access denied error in the CAS.log.
I have found that I can work around this problem by setting the DP to allow anonymous access. After checking this box, the software updates install during the build and capture task sequence. Unchecking the Allow anoymous makes the problem recur.
I would like to not have to have the "allow anonymous access" enabled on the DPs for obvious reasons. Other packages download correctly from the DP with anonymous access disabled - they use the network access account. Install Software Updates
is the only step that seems unable to use that account to talk with the DP.
Is this a known issue? Is there a work around?

Thanks for the information. I will give that a try. I do have the SMSMP & SMSSLP (not sure I need this one in 2012) filled in in the Configmgr client install settings. Before I did that, it couldn't even find the SUP.
I am a little skeptical that the hotfix will fix my problem since most packages are downloading from the DP fine - it is only Software Updates that are failing to download. On the other hand, it is clearly a permissions issue since allowing anonymous
on the DP resolves the issue, all be it in a way I am uncomfortable maintaining in the long run.
That KB replaces a lot of key Windows system files. Hopefully, it won't cause more problems than it solves.
---additional thought
I wonder, could it be that Packages that work without this KB have package share settings with "Copy the content in this package to a packages share on Distribution Points" cleared/unchecked? This setting is not available for patch packages
- so I wonder if it is enabled by default behind the scenes. That could explain why the patch packages are affected and not the other regular application packages I have are not. All my regular packages so far do not have the
"Copy the content" box checked. Clients would be accessing the packages differently I suppose based on whether it was through a packages share or through the new SCCM 2012 package storage thing with the hashing.

Build and capture task sequence stops after apply windows updates

Hi
SCCM 2012 SP1 CU4. Deploying Windows 7 SP1.
Pulling my hair out over this one. I successfully performed a build and capture installing some applications. When I choose to install Windows updates, the updates install, the system reboots then doesn't continue. Applications don't install, image isn't captured.
I've tired using the default B&C TS and receive the same results. I've amended the TS to as follows, as suggested in a technet forum post: https://social.technet.microsoft.com/Forums/en-US/a535e509-fc6a-483c-bf24-7e2aa064e5b7/deploying-100-of-available-software-updates-during-a-task-sequence?forum=configmanagerosd
Looking at smsts.log there's errors relating to not accepting the license agreement, but I didn't think this would stop the TS.
Can someone point out why the deployment stops?
https://dl.dropboxusercontent.com/u/23479177/smsts-20141113-182413.log
Cheers

This is very common scenario you´re having! :)
For OSD and for Capture I always create myown Software Update Group, which lets me totally control, what updates goes to the image and which doesn´t. I then edit membership of update and tag or un-tag update to the group.
I suggest you do the following:
1. Create manual Computer record and add it to OSD Capture collection.
2. Create SUG for OSD Capture and un-tag updates which are listed in KB2894518. But that might not be enough.
3. Deploy TS to the OSD Capture collection.
4. Create/modify virtual machine with MAC matching the computer record.
5. Run PXE and hook Capture TS.

Build and Capture - How to install software updates without joining domain

Due to security policy, can't join domain before the patch installation.
I want to know the detail steps. I only set SMSMP when install Configuration Manager, but in the end, NO updates are installed.
Do I miss some steps? what are the detail steps?

HI Jorgen
Sorry for my poor English!
You mean I should create two new collections, one is X86,
another is X64.
Add the "Unknow Computer"
object,
that I want to build and capture, into the two collections
Deploy the patches to the two collections
Do I correct?

Getting Updated image through Config manager Build and capture process

Similar Messages

Maybe you are looking for