Getting web host name, web-port, oral-report server name and virtual path
Hi.
I have been using oralce forms 6i on oracle application server 10g. I have three servers installed on remote locations.I just want that when i am hosting an application on a server, the web host name, web port , oracle report server name and the path of directory should be selected in a dynaminc variable at application level at run time. In this manner, I will be able to make a single application for all three servers. Any other solution to this problem is also welcomed. Please help anyone and oblige me.
Hi Rajesh,
Actually Web AS Host name is <Servername>.<domain name>:<Port no>
Web AS Path for R/3 is </sap/bc/bsp/sapd>
Refer the following link.
<a href="https://forums.sdn.sap.com/thread.jspa?threadID=402561">https://forums.sdn.sap.com/thread.jspa?threadID=402561</a>
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=265076">https://www.sdn.sap.com/irj/sdn/thread?threadID=265076</a>
Regards
Hemalatha
/Assign points if helpful/
Similar Messages
-
Get report server name and port name
J want to know if it is possibile to obtain from a form the name of the report server and the port on work.
Infact if i use two different application server the nae of the report server change and in the script that call the report server is necesseraly using the name of the report server.
Thank'sif your cases are that the dev, test, production servers have different servers and databases, then you may create a table e.g., report_server_profiles(serv_name varchar2(100),ports number), it contains one record ONLY in each server's database, then in your form code only have same code that works for three of them.
If you have two report servers, but have one database, then you may add a flag column in above table and depends on users group to set that report flag. -
Where can i get the report server name in Reports 10g
Where can i get my report server name in 10G ?
Thanks ..
When i opened the bat file :
i did not find any report server name ...
This is my file :-
@echo off
REM $Header: rwdiag.bat 13-may-2005.03:21:21 sunaraya Exp $
REM
REM rwdiag.bat
REM
REM Copyright (c) 2005, Oracle. All rights reserved.
REM
REM NAME
REM rwdiag.bat - rw diagnostic tool
REM
REM DESCRIPTION
REM Script to run the diagnostic tool used to locate servers / monitor packets on the network
REM
REM NOTES
REM Usage: rwdiag.bat -find <server name> | -findAll [-conf <config file>] [-timeout <timeout in sec>]
REM
REM Usage: rwdiag.bat -monitor [-log <logfile>] [-conf <config file>]
REM
REM MODIFIED (MM/DD/YY)
REM sunaraya 05/13/05 - Added rwrun.jar to the classpath for bug 4361664
REM sunaraya 04/22/05 - Provided execute permission to the script for bug 4323789
REM sunaraya 04/14/05 - sunaraya_bug-4221172
REM sunaraya 04/14/05 - Creation
REM
set ORA_HOME=C:\ORANT
if "%ORA_HOME%"=="" goto ERROR
set CLASSPATH=%ORAHOME%\jlib\zrclient.jar;%ORA_HOME%\reports\jlib\rwrun.jar
%ORA_HOME%\jdk\bin\java -DORACLE_HOME=%ORA_HOME% -classpath %_CLASSPATH% oracle.reports.utility.DiagServerLocator %*
goto END
:ERROR
echo "ORACLE_HOME is not set"
echo.
:END -
How to get the report server name in Forms 10g.
How to get the report server name in Forms 10g.
I'm using the Application Server 10g 10.1.2.Hello,
I do not think that you can get this value from anywhere. A solution is to put the Reports server name in an environment variable stored in the /forms/server/default.env file, then to query it at Forms runtime with the TOOL_ENV.Getvar() built-in.
Francois -
How to get report Server Name and Environment ID in Report
How to print report Server Name and Environment ID in Report 10G.(Through in package or others)
I'm also using Oracle Application Server 10G.Hi,
Server and envid are the parameters passed along with Reports URL call.
These variables value can be traped in Report by defining SERVER , ENVID named user parameters.
Once trapped, can be printed on Report.
Just ensure that these users parameters are not exposed to Parameter page, otherwise user may end up changing it.
Thanks -
How can I change Report Server Name.
I have installed Report Server rep60_ifs. Because I have problems , I want to change it.I was created new REport Server Service REPSRVGORDE
with following entry in tnsnames.ora ( on 9iAS)
repsrvgorde.world=(ADDRESS=(PROTOCOL=TCP)(HOST=IFS)(PORT=1949).
In My Form in the trigger WHEN_BUTTON_PRESSED:
declare
L_REPID REPORT_OBJECT;
L_REP VARCHAR2(200);
begin
l_repid := Find_Report_Object('REPORT8');
Set_Report_Object_Property(l_repid, REPORT_FILENAME, 'ajde');
Set_Report_Object_Property(l_repid, REPORT_EXECUTION_MODE, RUNTIME);
Set_Report_Object_Property(l_repid,REPORT_SERVER, 'repsrvgorde');
Set_Report_Object_Property(l_repid, REPORT_DESformat, 'HTML');
Set_Report_Object_Property(l_repid, REPORT_DESNAME, 'proba');
-- run the report
l_rep := Run_Report_Object(l_repid);
:block3.pr:=L_REP;
WEB.SHOW_DOCUMENT('HTTP://.../.../rwcgi60.exe/GETJOBID='||L_REP||'?server='||'repsrvgorde','_BLANK');
END;
When I am running this code , I'm getting the report_job_id, and after that the message " FRM-41214 Unable to run report"
What's the problem now????? -
How to check report server name and how to start report server in 10g ?
Hello Experts,
I do have 10g Dev suite installed on my machine
I want to run my report on web using OC4J
How can i check the report server name as well how can i start the report server if is not running ?
As well,
Want to know in real time how it works in case there is application server installed
Thanks in advance,
SShubhangiHi Tony
Sorry for the confusion as I m new to reports
I do have 10g Dev suite installed/Report builder on my local machine
I want to run my report on web using OC4J on the same local machine instead of the Run paper layout and Run web layout option
Means i want to run the report by passing URL like below
http://hostname:port/reports/rwservlet?report=report_name server=server_name+userid=db_connect_string+destype=file
+desformat=spreadsheet+desname=C:\temp\myexcel_output.htm
How can i check the report server name as well how can i start the report server if is not running ?
Hope this is clear now
Thanks... -
How to find out SSRS report server name
I'm trying to follow the steps for using SSRS web services (http://ssrstutorials.blogspot.com/2012/10/lesson-12-using-ssrs-web-services.html).
In Step 3:
Click advanced--> add web reference -- url - http://localhost/reportserver/reportservice2005.asmx
(replace localhost with your report server name).
How do I know what's my report server name?
Thanks,Hi sherri71,
Sorry for that mark an incorrect reply as an answer.
The reply suggested by Akbar is about Instance Name, not report server name. Based on my further research, I find that the Reporting Services server name is the computer name which install
the report server. So we can try to click Start button, right-clicking Computer, and then clicking Properties. Under Computer name, domain, and workgroup settings, you can find your computer name.
If there are any other questions, please feel free to ask.
Thanks,
Katherine xiong
Katherine Xiong
TechNet Community Support -
Dear All,
I am stucking with the following problem,
I have deployed my ERP apllication (developed in oracle forms & reports 10g) on oracle apllication server 10g forms & report services. my apllication server has two LAN card. out of two one has been configured with statis IP for web access. but while running report from parameter form i am taking report url from table. table contain report server name as my local server name.
My problem is,
If i am accessing erp from web using static ip and running report then server name is not recognized
because it is my local server name coming from table. so for that every time i need to change report url & replace server name with statis ip in browser addr for web users.
Please guide me what should i do to resolve this issue.
Your reply would be greatly apprecited.
ThanksIf "Credentials supplied by the user running the report" is selected, when the report is run, the user will be prompted to provide credentials. They would need to provide credentials that have the appropriate permissions (e.g., read, execute) to the
database. This prevents the double hop.
If "Credentials stored securely in the report server" is selected, you have to enter the username and password of a user (or service account) that has the appropriate permissions (e.g., read, execute) to the database. When the report is run, SSRS will use
these stored credentials each time to authenticate to the database engine and query the data. Users running the report are not prompted to provide credentials. With this option you can use an Active Directory or SQL Server account.
In order to access/run the report, a user will need to authenticate to SSRS. There are options here as well. You can provide them the link to the report manager and they can authenticate, navigate to, and run the report. You can also provide
direct links to reports that users click in a document or application. At this point the user is typically still prompted to authenticate to SSRS. You can also programmatically call the report using API's and essentially build a proxy that authenticates
to SSRS and open the report.
Not sure if that answers your question. -
Hi All,
I am calling reports from the forms for that I have hard code the report server name in my code.
Is there is any alternative to set the report server name dynamically at run time, means how to find the report server name and pass that into as a parameter in my code.
Regards,
AshutoshThanks Andreas ......... report server name is getting now.
I have one more problem ......... i m using webutil.pll in forms 10g
in that i am using client_host function ........ to run the host command on local machine to delete or copy a file.
On when-button-pressed trigger writing below code :
CLIENT_HOST('CMD /C DEL C:\TEMP.TXT');
Its giving an error message : ORA-06503 & PL/SQL function return without value.
Could you please help me out ....... as i am new to forms 10g
Thanks in advance for your assistance.
Regards
Ashutosh -
How do I find the report server name, and then run paper report from forms?
How do I find the report server name, and then run paper report from forms?
I am having a problem running report 9i from forms 9i (see below thread). How do I find out the name of the report server? I checked my C:\ids\reports\conf directory but don't see anything that gives me the name of the reports server. I also don't have a iashome directory.
Also, I just want to run the paper report (not the web version).
Thanks.Hi,
please read teh Forms / Reports integration paper in teh Collateral section for Oracle9i Forms at otn.oracle.com/products/forms
In summary, you have to create an external Reports Service that you can then give a name.
Frank -
Please help ! "Oracle Reports Server CGI - Reports Server name is not specified."
Hello Gurus,
I have an html form that allows putting in a parameter. Upon
submit the form, it'll pass a string URL with the parameter to a
new browser.
My url: http://localhost/servlet/oracle.reports.rwcgi.RWServlet?
diary&14252
I also used keymap looks like this
diary: report=Diary.rdf server=servername desformat=pdf
destype=cache userid=id/psswd@db myoid=%1 %*
But I get an Error: The requested URL was not found, or cannot
be served at this time. Oracle Reports Server CGI - Reports
Server name is not specified.
However, if I move the cursor to the end of the same url (or put
a space at the end) and hit Enter, then the report is
displayed. I guess there must be something wrong with my
configuration. Please help. I appreciated any inputs from you.
Thanks in advance.
AshleyI found the solution to my problem. It was nothing to do with
the cgicmd.dat keymap file, but the html form itself. It's
confused between the url arguments and form arguments from the
submit button. So, what I did was open a new window with all
arguments instead of using the submit function.
Regards,
Ashley -
Hi all,
Can you explain to me how to get the REPORT SERVER NAME from the
UNIX machine and use it in the REPORT OBJECT in order to check
on the status of the report.
RgdsHi all,
Can you explain to me how to get the REPORT SERVER NAME from the
UNIX machine and use it in the REPORT OBJECT in order to check
on the status of the report.
Rgds -
How to find Report Server Name
Dear All
Assalam-o-Alikum
i am running the report using "run_report_object" on "Forms [32 Bit] Version 9.0.4.0.19 (Production)". the problem is that i don't know the Name of Report server, can any body can tell me that from where i find the name of report server.
i have to give the report server name to run report.
Thanks
Best Regards
Farrukh Shaikhhi
u have to install the report server something like this.
rwserver -install server=server_name autostart=yeswhen u installed the report server so u can use u r own report server name.
and u have to use the above code in DOS.
full path.
c:\Developer_home\bin\rwserver -install server_name(Any Name) autostart=yes
sarah -
Report server name in rwservlet.properties file
Hi all,
I dont want to hard code the report server name while calling report from the form...
I have used....
vrep := RUN_REPORT_OBJECT(myreport1);
/* Checking for Report Server is started or not, if not throw an exception else proceed */
if vrep = vrep||'_0'then
raise form_trigger_failure;
end if;
vjob_id := substr(vrep,length(vc_reportserver)+2,length(vrep));
vrep_status := REPORT_OBJECT_STATUS(vrep);
where vc_reportserver is assigned a value of my report server name...
If I edit rwservlet.properties file and give
server=<my rep server name>,
How can i read this value from the form ? Any help please?
I know there is a way to do in formsweb and default.env. But I want to know the way how to used in rwservlet.properties file and use it in the form.
Kindly help
PriyaThanks Francois for your reply.
You can pass this value in the formsweb.cfg file (otherparams=)So, in forms I have to create a parameter matching with the one what I have mentioned in otherparams. right?
you can read it from a database parameter's table (solution I prefer).So, just storing the report server name in database and fetch like
select --- from tablename! Is it so?
And apart from this, may I know why you prefer this method?
And why not rwservlet.properties??
Regards
Priya
Maybe you are looking for
-
SplashID 7.1 crashing after migrating to a new MacBook Pro
I just bought a new MacBook Pro (Retina 15") and migrated all my apps & files from my old MacBook Pro which was already running Mavericks. I can no longer open SplashID 7.1, It crashes upon opening. I have tried reinstalling it, however the reinsta
-
Error from EAS - "refreshing security from Shared Services failed"
Hi, I was using Native only security in HSS for Essbase 11.1.1.3 and EAS allowed me to Refresh security from Shared Services. (Essbase security was already externalized to HSS.) However, after I added "MS Active Directory", and provisioned a MSAD use
-
How To Send Invoice List as attachment in User Decision Step?
HI All, I have developed a workflow in which there is one ZMETHOD in which i will get the list of invoices.and that i want to send it as attachment to User Decision Step. How to do this? Regards, Arpita
-
Row wise Initialization - Huge LOV
We use External table for Authentication & uses row wise Initialization. It is working perfectly fine, but the issue is the list of values (output) from row wise initialization is pretty large (the output SQL will be at least 30 pages). This is alarm
-
After updating to Maverick on my MacPro it no longer sees both CD drives Help
After updating to Maverick on my MacPro it no longer sees both CD drives Can anyone help? When I hit the eject key only the bottom drive ejects........ Thanks [email protected]