Getting weird ads on websites like google and youtube

underneath youtube videos it'll have a green button that says " watch it" and sometimes two black buttons that say "download" and "watch" and google has these "eat this, never diet again' ads that come up no matter what I search.
what's the deal with this?
I torrented some music, but it was Miles Davis so why buy it when the money wouldn't even go to him

Well, it may; but if it doesn't last, you may need to look further into
removing Adware or other contributory items that can get put in
your Mac OS X from browsing. Some sites hide a bad file or two
inside a different packet, so those are suspect to contain tampered
files or odd applications that can ruin the Mac OS X.
And some cleanupmac mackeep and other unnecessary and
corruption causing offerings do not clean much except your
billfold; they also cause damage to the system. Bad ideas.
TheSafeMac pages have some fairly good ideas, & to get an idea
(at a superficial level) see the Etrecheck report tool that others have
tried, that generates a postable page to show what may be running
in your OS X that may not belong there. Once posted in a thread it
can be read by knowledgeable persons who can understand it.
•About Etrecheck: http://www.etresoft.com/etrecheck_story
link includes click to download page
Also if you have an issue or think you do, and start a new thread,
perhaps contributor Linc, who knows the command line well
can spot your inquiry, and will reply with a way to get the reports
and also test your computer, to see what is hiding, where. His
methods are lengthy, thorough if followed exactly, and tedious.
But the results are better than piecemeal dissection & angst.
The simplistic etrecheck report and adware/malware guides from
The Safe Mac can help even a novice try & remove badwares.
Good luck & happy computing!

Similar Messages

  • Acer crystal Eye webcam not working with websites like facebook and youtube.

    my webcam works just not with websites like facebook or youtube. it used to work before the latest version of adobe flash player came out. Can anyone help me with this?
    Acer Aspirec 7736Z-4809
    Windows 7 Home Premium-64 bit

    fixed it. i forgot i had cyberlink youcam installed. so i uninstalled it and it works fine with faceebook and youtube now.

  • Websites like yahoo and google taking incredibly long to load

    Websites like yahoo and google taking incredibly long to load.

    Hi r_saha,
    Welcome to the Apple Support Communities! I understand that when using Safari some specific websites are slow to load. There could be a couple of different steps I would suggest to help you get this resolved. I suggest trig a different DNS service first; the steps can be found in the following article.
    Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found
    http://support.apple.com/kb/ts3408
    Resolution
    Your DNS server(s) or your router may be affected by DNS prefetching in Safari 5.0.1 or later.
    First, try a different DNS service
    Try a different DNS service, such as one of the DNS services below. This will test to see if the root cause of your issue lies with your selected DNS servers.
    OpenDNS (http://www.opendns.com/)
    Google DNS (http://code.google.com/speed/public-dns/)
    Or, search the Internet for "Third-party DNS services" for more options and information
    For information about how to change DNS settings in Mac OS X, see Editing DNS and search domain settings.
    If the issue persists in Safari, return to your original DNS server settings if desired, then continue with the next section.
    I hope this helps,   
    -Joe

  • R/3 job and get the details of variants like (from and to)

    Hi,
    How to find R/3 job and get the details of variants like (from and to) for that job.
    the job is extraction job and running for 4 hours in R/3 once atfer this job completes BW job will start executing. Now i have to analyse R/3 job that how many years of data it is extracting (from, to) and other useful information why it is taking time for 4 hours.
    Please let me know what transaction i have to use and how to check this information in R/3 side.
    Thanks,

    Hi........
    Go to SM37 >> select the job >> Click on Job log.........Check there whether u r getting any Clue or not...........Is this load is through PSA..........? if so check the records of the First data packet...........then the Last data packet............from there u can get some idea..................
    Also u can check the data in the Extractor.......is it a full load?.............Go to RSA3 >> Execute..........there check the data........
    Is it a LO datasource ? if so................Go to LBWE >> Click on maintenance link for your datasource........>> Here in the Right pane u can see the Structute associated with that Datasource ...........If u remove MC from those structure name............u will get the table name..............In those tables also u can check the data...............there should be some data field.............from where u can get some idea.........
    If ur Extractor is extracting data using some Function Module.............then open the datasource using RSA2.............there double click on the Exrtractor..............u will get the function module.................u can try to analyze the function module............
    For Variants..................select the job >> click on Step in the top >> then Go to in the top >> Variant..............but I don't think this will help u............this will tell u that this Extraction job is part of which chain or IP......
    Regards,
    Debjani..........

  • Some websites, like Amazon and Shutterstock became garbled after I updated Java.

    Some websites, like Amazon and Shutterstock show up completely garbled. I suspect problems with Javascript, and I'm pretty sure the issue started after I updated Java. I did all the troubleshooting tips listed on this site, and none helped. I booted Firefox without extensions and the problem prevailed. I don't know what else to do.
    Mac OS 10.6.8, Java up to date, Firefox 12.0

    hello, can you try to clear cache, cookies & history for the affected sites as it is described here: [https://support.mozilla.org/en-US/kb/Websites%20say%20cookies%20are%20blocked#w_clear-history-for-that-site]
    in case this doesn't resolve the issue, also go through the other troubleshooting steps of [[Websites look wrong]]. thank you.

  • The last few times I imported photos, the backup location was set to "documents" with no sub-folders. How do I get them into sub-folders - like year and month?

    the last few times I imported photos, the backup location was set to "documents" with no sub-folders. How do I get them into sub-folders - like year and month?

    Use the Subfolder pulldown to set the subfolders:

  • Hello, all of a sudden without apparent reason I can't get "MAIL" to function. It starts up but I get the color wheel turning like crazy and never ends. I've tried restarting and I still can't get it to work. PLEASE HEEELP!?

    hello, all of a sudden without apparent reason I can't get "MAIL" to function. It starts up but I get the color wheel turning like crazy and never ends. I've tried restarting and I still can't get it to work. PLEASE HEEELP!?

    In the Desktop Manager > Sync > Configuration, make sure the calendar options are set to override Outlook.
    Set it also to notify you of the changes, so you will have to approve any changes.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How can I remove viruses off my computer? I have mac OS X, but I clicked on a website on google and it didn't open. Instead the security program popped up and said that my computer is at risk of a crash and has detected several viruses!?!?! AAAAHHH!?!?!

    How can I remove viruses off my computer? I have mac OS X, but I clicked on a website on google and it didn't open. Instead the security program popped up and said that my computer is at risk of a crash and has detected several viruses!?!?! AAAAHHH!?!?!

    MnM
    It's probably the MacDefender scareware trojan horse. If you have this here is how to remove it.
    1. Open Activity Monitor look for MacDefender process double click on it and hit quit or force quit.
    2. Go to System Preferences, Go to accounts, Go to login items look for anything related to MacDefender hightlight it by clcking on it once. Then hit the minus sign to remove it.
    3. Go to applications folder and drag MacDefender to the trash.
    4. Open finder and do a search for Macdefender and remove anything you see related to MacDefender.
    5. Open Spotlight (the little magnyfing glass in the menubar far right corner) and do a search for MacDefender.
    6. Restart your computer and empty trash.
    7. If you feel you need to have virus protection for your Mac use ClamXav. It's the recommended AV program for MacOSX. Hope this helps.
    Joseph

  • Why does my computer create web connections to addresses in the Amazon, Google and Youtube range when I start Firefox?

    I think I already disabled all the updating functions, yet, SOMETIMES when I start Firefox, (with about:blank), my network monitor shows one to five connections to IP addresses mostly in the 74.125.225.x, 74.125.227.x, 74.125.228.x, and 72.21.x.x ranges. Those ranges include Google, Amazon, and Youtube.
    I use Kaspersky, and have scanned multiple times for malware, and even had their technical support look into my computer. They see no malware. It is the Kaspersky Network Monitor that revealed the problem.
    As I find them happening, I try to jot down the addresses, (quickly, because some of these connections only last a second or two), then add those to a firewall rule I created to try to combat the problem. Yet, next time I start, new addresses are "attacking". Of course, some get away, because I don't get the address jotted down before it goes away. At one point I used masking that ended up keeping me from Google and Youtube, so I have to add the addresses individually, and my block list in that one rule is 13 items long now. The only IPs not in those ranges are 23.5.251.27, and 173.194.46.5. Not sure where those go.
    I used to get attacked by addresses in the range that includes Amazon ... 72.21.x.x. I have a separate firewall rule for them that has 33 addresses being blocked.
    I should not have to do all that. Firefox should start and just sit there quietly until I start clicking or typing in it. This has been happening in Firefox versions going back to 11. May have gone on before that, but I wasn't tracking it then.
    Also, it doesn't always happen, or, more precisely, with addresses I have not already blocked, (because my only way to know it's happening is when the connections are allowed to be made). It does not always happen right after Firefox is up, but sometimes several minutes later. I have started Firefox and just sat and watched the network monitor without doing anything in Firefox, and have seen this happen up to 15 minutes after I start Firefox ... mostly just two or three minutes when there's a delay at all.

    Firefox does not do anything but sit on about:blank after I start it as long as I have a firewall rule enabled that completely blocks these subnets:
    74.125.222.0/24
    74.125.227.0/24
    74.125.228.0/24
    173.194.46.0/24
    173.194.115.0/24
    173.194.121.0/24
    64.233.171.0/24
    54.230.90.0/24
    54.230.88.0/24
    72.21.194.0/24
    72.21.195.0/24
    72.21.215.0/24
    207.171.163.0/24
    Otherwise, Fire fox creates connections to one to five addresses in those ranges. Note that there are more than 5 subnets above, but usually three connections satisfies whatever purpose these connections are being made for. If I had some links or whatever that is causing these connections, I would expect all of them would come up every time.
    Also, these connections do not start immediately upon starting Firefox, they wait up to 15 minutes to start ... fifteen minutes of just sitting idle ... no actions on my part that could possibly initiate them. Usually these start within three minutes. A typical ploy of malware is to wait until no one is looking, or the until there's a forest to put their tree in so it won't be noticed.
    While the above rules are in place, I do not have access to Amazon, Youtube, or Google, (or any of the various blog sites and services sponsored by Google, including Google Maps and Gmail). That list may not be complete, as I have other firewall rules in place that mainly block individual addresses.
    It seems to me as simple as; figure out who owns those subnets, and you have your bad guys. Then go after them.
    It's true that I have a bookmarks to Google, Gmail, and Youtube, but these are not "active" bookmarks nor RSS feeds. I have not voluntarily gone to Amazon on this computer.
    The traffic being transmitted is unknown. It is usually not extremely large amounts of data ... less than a meg, but I have seen close to a Gig transmitted out of my computer, and over 400 meg transmitted to my computer, when I was not paying attention to block the offender. Even if it's small amounts, things like cookies, path structures, configuration settings, histories, etc. do not involve a lot of data, but, to me, represent a security breach, if someone decides to look at them unsolicited by me, not unlike your landlord, mortgage holder, or neighborhood police officer walking into your home while you're not there, and taking pictures of, or simply inventorying your belongings.
    It is VERY much like some sort of backdoor malware. No malware is detected on my computer.
    I looked at the suggestion above for OS changes for logging HTTP activity, but the author neglected to include instructions for backing out these changes after using them. If this were to create more jewels in a drawer the thief has access to, reformatting and restoring my drive is not the kind of back out process I enjoy. Therefore it would be foolish to apply them. To me it would be like bungee diving with no bungee. Fun until you hit the bottom. Give me the bungee, let me make sure it's short enough, then I'll dive.

  • Google and Youtube not accessible intermittently from FiOS internet

    Ever since the beginning of 2015, I have the problem accessing Google and Youtube. This happens intermittently and it now happens almost everyday. While I can't access Google and Youtube, every other website works fine.
    And I know it is not Google and Youtube's problem as I can access both websites from my phone cellular network.
    I am on FiOS 50/50 and still using the stock router MI424WR-GEN2
    Firmware version 20.21.2 ( I just upgraded it recently after I start having the problem which doesn't make any different. )
    Everytime this happens, I have to release the public interface IP and power cycle the router so that it gets new public IP( the power cycle may not actually needed but I just do it) . and it will kind of solve the problem. But now that it seems to happen almost everyday, it is becoming a pain now.
    Does anyone have the same problem as I do at all?
    Or anyone has a permanent solution to this?
    Thanks!
    Ken.

    I got a nice little workaround for ya, provided you speak English.
    When you load the youtube page, click the help button. This should bring up the support page, which seems to load correctly. For me, anyways.
    Then, assuming step one went as planned, in the upper right corner, you should see a small globe that has the word 'Site:' next to it. Click it, and a dropdown menu appears. From here, click the United Kingdom option, then try loading the video from the UK server.
    That's what worked for me.
    Keep me informed?
    Message was edited by: x snowcat x

  • I have installed about 35 add-ons in my firefox 4 , and it got very slow in brosing sites like facebook and youtube and others..always at scrolling through the page or clicking on buttons...etc

    i have installed about 35 add-ons in my firefox 4 , and it got very slow in browsing sites like facebook and youtube and others. at scrolling through the page or clicking on buttons...etc
    this is nit occuring in google chrome in the same degree

    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • My ipod comepletly froze and ive googled and youtubed ways to fix it! its on recovery mode and when i hold the home and power button it shows the apple button for a second and then it shows recovery mode again! i need help i DONT wanna restore!

    My ipod comepletly froze and ive googled and youtubed ways to fix it! its on recovery mode and when i hold the home and power button it shows the apple button for a second and then it shows recovery mode again! i need help i DONT wanna restore!
    ive read that alot of ppl are having this problem i need my ipod so if someone can help me ASAP

    Here is what you should do turn the device on hold the home button and the power button until the device turn off keep holding and when the device reboots release the power button but hol the home button until it shows the iTunes logo then restore it

  • Why does my mac safari keep redirecting me to websites like Mackeeper and popping up with ads all over the websites i visit?Please help me get rid of this problem safely and securely

    Hey,
    My mac keeps redirecting me to pages like MacKeeper and stuff on safari.
    Its also popping up with a ton of ads like you just one and i phone 5 and crap.
    Also when i click somewhere on the page where I'm not supposed to click some times it
    redirects me to a new page please help!!!!:/ If u give me any websites to use
    please make sure there securer or u have used them before so i don't get anymore viruses!
    P.S i only got my mac this year
    Thanks if you can help

    You may have malware installed on the Mac. To remove it run this:
    Adwaremedic: Removes all known adware from your Mac

  • My search engines like google and yahoo come up on a notepad text style when i select a website. Then the file goes to my download file. ??

    when i search for websites on google, tahoo. bing once the list comes up and i select one it pops up as a notepad text window and the download window also pops up. i can't get to the website i choose.

    Do a malware check with some malware scanning programs.<br />
    You need to scan with all programs because each program detects different malware.<br />
    Make sure that you update each program to get the latest version of their databases before doing a scan.<br /><br />
    *http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    *http://www.superantispyware.com/ - SuperAntispyware
    *http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    *http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    *http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • Opening a new link in a tab (contr+click or right click and open in new tab) causes ff to lose scroll position in first tab or main website, like google.

    Opening a new link in a tab (contr+click or right click and open in new tab) causes ff to lose scroll position in first tab or main window, like google.
    This does not happen when opening in a new window (shift+click).
    It was never a problem in older versions. I now have ff 3.6.17. I' afraid to install ff4 because everytime i do so (install e new version) something i liked dissapears or good add ons dont work anymore!
    I also don't like the fact that more and more of the adress barr is beïng used for crap i don't need. I'm a visual handicap and need all the space i can, just to read.
    Thanks for helping me out.

    To help other users find solutions, please return to this Thread and '''Sign-in''' to the forum with your Username and Password:
    click on '''"Solved It"''' next to the reply ABOVE that '''BEST''' solved your question
    '''DO NOT click "Solved It" next to this reply

Maybe you are looking for

  • No line numbers in stack trace from Java Stored Procedure exception

    I have a Java Stored Procedure which can generate an exception. In one database (11.1.0.6) the Java stack trace contains line numbers for my code, but not for the classes loaded by default with the JVM. In another database (same version) the Java sta

  • ServerApplicationContext SaveChanges loose data

    Hi, I've an entity with 2 navigation property (ForeignKey). In WebApi controller with ServerApplicationContext I want to add new entity with the following code: navprop1 = CurrentDataWorkspace.ApplicationData.Type1.GetQuery().Execute()               

  • Fuego.papi.exception.SharedParentInstanceBusyException

    The process has a split-join. Instance in one branch is in join. The interactive activity in another branch cannot be executed. In the Javadoc / PAPI, no enough information about this exception. I use BPM standalone 10.3.1 and studio 10.3.0 Exception

  • Add datafile on remore computer

    hi, i am working on oracle 10g windows & all my disks are full and i want to add a datafile on other computer . how can i do it ? regards

  • How find from name for AP Invoice personalize header

    Hi, Please information regrding How to find the form name and location for AP Invoice personalize header. And provide navigation. application version is 11.5.10.2 OS:RHEL4 Edited by: user8936206 on Jun 14, 2010 10:32 AM