Getting what I want out of my HP Officejet 7000?
Greetings All !
I have an HP Officejet 7000 that I purchased primarily for one unusual purpose:
I have designed a board game and intend to do the printing of the board surface myself. The board document is a Microsoft Publisher file with a page size of 18.75" x 18.75". My thinking was that I could use two 13x19 pieces of paper together to make up the board (one page for each half).
So, I'm doing some test prints this morning. Now, I fully expected that I'd have problems telling Publisher to print the right half of the document. I had a similar issue on smaller paper a few months ago. I "fooled" another printer by converting the document to PDF format, printing the left half, rotating the document 180 degrees, and then printing the other half.
This leads me to my first question: I CAN do this work-around with the Officejet 7000, but I can't help but wonder if there's some way I can adjust the Print Settings to do the same thing directly from Publisher?
Now, that said, for my test prints, I primarily used the "borderless photo" shortcut (and unchecking the setting for monitoring the page width). I am printing on Epson Photo Quality Inkjet Paper (also called "Presentation Paper"). Here's a link to it:
http://www.amazon.com/gp/product/B000FSDFAO/ref=ox_ya_os_product
What surprises me most about the prints is how DULL the black lines appear to be. I used black lines to draw my spaces on the game board, plus I have a thin black "gutter" around the entire board. The black just isn't "crisp"! I'm assuming there's some combination of settings I can use to overcome this?
Thanks!
-= Dave =-
You can get out of your Edge contract simply by paying the balance remaining on your Edge payments.
You can cancel your service at any time and the amount owed will not be affected. You used to continue making Edge payments if you canceled service. I am unsure if that is still the case, or if the full amount becomes due upon service cancellation.
You can cancel your service simply by porting your number to another provider.
Similar Messages
-
How do I get my money refunded? I am not getting what I want from this, cannot email anyone for help, cannot get someone on the phone I can understand, and keep getting disconnected. I just want my money back.
"this" being what? You posted in the Workspaces.acrobat.com forum, which is a free service.
If you subscribed to any of the paid services see Cancel your membership or subscription | Acrobat.com online services -
Running Total Fields - using formula, but can't get what i want?
Hi All,
I have already searched some forum, but still can't figure out what going wrong. Can anyone help me?, please
I create a view from access named u201CStatementReportu201D and have the following field.
<InvNo>
<CustNameC>
<JobItemNo>
<InvDate>
<JobTypeId>
<JobPrice>
I create three parameter as CustName, StartDate, EndDate, then I create a Group to group <InvNo> as the report detail and a Running Total Fields for calculate the total of <JobPrice>.
So far the report is fine. Showing the grouped <InvNo> and the total amount of <JobPrice>
Then, I want to calculate the <JobPrice> by the condition of <JobTypeId>.
First, I create a new Running Total Fields
Field to summarize = StatemetnReport.JobPrice
Type of summary = sum
Second, I create a formula as following
whileprintingrecords;
global numbervar type1_sum :=0 ;
if {statementRe.JobTypeId} = 1 then
type1_sum := type1_sum + {statementRe.JobPrice};
type1_sum;
After completed the formula, and i press Ok button.
A dialog appear "Warning: Reset/evaluate condition formula contains variables. Do you want to keep it?"
No matter i click Yes or No, I still can't get anything display on the field.
Edited by: manho88 on Mar 9, 2010 9:42 AMHi,
Instead of running total use can try this formula.
Place this formula in the details section.
whileprintingrecords;
numbervar jpsum;
if =111 then
jpsum:=jpsum +
else 0;
You can modify this formula as per your requirement.
Hope this helps. -
Apple devices always says for gaikai, "gaikai coming soon to iOS devices" but I have had this iPad for 2generations (updates) iOS 6 and 5 yet there is no change to the same excuse. I smell something fishy and I am getting irritated with the same excuse. Just give people the gaikai folks!
It's easy as abc and 123. I do not want to erase my contents and sell this device for this cause. Please give the gaikai for the sake of sim lovers out there!Contact the Gaikai developers. It isn't apple your mad at
-
any kind of transaction ,purchases from any of the game or appli Idownloaded could not make it always shown on my screen is"Please contact iTunes support to complete this transaction ,could you please tell me what is the problem with my acct.
These are user-to-user forums, nobody on here will know what the actual problem is with your account.
You can contact iTunes support here : http://www.apple.com/support/itunes/contact/ - click on Express Lane, then iTunes > iTunes Store -
I am trying to transfer my data from Internet Explorer to Mozilla Firefox.I am following directions but it doesn't download everything.
The version of iTune for the Mac is not capable of running on an iPad.
-
I'm sorry I thought I was already doing that lol. Ok so I paid for more storage for my iCloud which was $3.99 but I'm releaizing that im going to have pay the $27.99 payment to get what I want I guess. So I would like to know if that payment can be stopped or forward to the other $27.99 payment I'll be making. I'm also not sure, but think I am lol, that if I were to pay the $27.99 if that applies to my iPhone and my iPad ? Or would that have to be two payments? Which I'm pretty sure its not but rather be safe than sorry. Thanks for your help. All i want to do is to able to store my music in iCloud so I can upgrade my phone to the new iOS 8.1.1 which I'm pretty sure I have room for but I'd rather just pay the $.399 than the $27.99 cuz. I don't need to listen to the radio lol
Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.
-
Hi - Re Keynote I'm trying to figure out how to create a music album (as an artist) on USB flash drive, (accessible by both Mac and PC). What I want is a background picture with 'click-buttons' to play each track listed, and play in order (like a cd) - also similar for embedded videos and photos etc. This should all be on the one page.
Is this possible with Keynote, or any other software package for Mac (am using Macbook Pro) ?
Gav 88Hi there,
Yikes, it sounds like you've been doing a lot of work on this project... Unfortunately, however, this isn't the Adobe Encore forum, but the Acrobat.com forum. While it seems like an exciting question, we're not able to address issues pertaining to other Adobe products and services. Here's a link to the Adobe Encore forum, where you're more likely to get help for this specific issue:
http://forums.adobe.com/community/encore
Sorry not to be of more specific help to you. Best of luck!
Kind regards,
Rebecca -
How do I get rid of the blank space after one paragraph and before the next paragraph startsin Pages '09? I understand that I should not have a page break mid paragraph but that is what I want.
Hi stephanie,
These are unrelated questions/statements.
Space before and space after a paragraph are controled in the Text Inspector, as you've found out.
Pages will create a page break whenever there is no room for another line on the page. That break can come anywhere in a paragraph.
You may be thinking of Widow and Orphan prevention, and the other Pagination controls, found under the More button in the Text Inspector. (If that's what you found, then thanks for the refresher! I hadn't been to that pane for awhile, and had forgotten the variety of pagination controls available.
Regards,
Barry -
Here is an example:
I type Denver Dum in the google box.
It gives me several options, one is Denver Dumb Friends League, which is what I want. I bring the cursor to Denver Dumb Friends League and click. It does nothing. The google box still has Denver dum in it. The only way to get a search to be completed is if I type in the whole phrase and hit enter. How do I get it to search using just part of a phrase? It used to do this before I upgraded to the newer version of firefox. Thanks!Do you have the Google Toolbar installed?
See:
* http://www.google.com/support/toolbar/bin/static.py?page=known_issues.cs -
to
We had a MacBook Pro stolen from our home when we were out of town and I am pretty sure we never activated the LoJack type of function on it not sure if its called lojack but you get what I am saying is there any way we can activate such hardware/app now so we can possibly recover our laptop? Any one who can point us in the right direction that would be great and we would be very grateful. Thanks So MuchLojack for laptops - if that is the product you purchased and installed, you will need to read the user manual or contact the manufacturer as it is 3rd party. You did file a police report right?
-
New problem, Lycos Mail is my home page. When I open a new window I usually get Google search, which is what I want. Now, somehow when I open a new window I get Yahoo search. How do I change it back to Google?
Thank you,
RandyA new tab opens by default as a blank tab (about:blank).
If that isn't the case then an extension has changed that behavior.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
You can middle-click or hold down Ctrl and left-click the Home button on the Navigation toolbar to open the Home page in a new tab.
You can look at this extension to set which page to open in a new tab:
* NewTabURL : https://addons.mozilla.org/firefox/addon/newtaburl/ -
What I want to do is , have two images on image displays and the pass them through the same setup as the pattern matching example to get the number of matches , I have attached what I have done and also given the pattern matching example program as well.
Hope to get answers back soon,
Thanks Alan
Attachments:
screenshot.docx 48 KB
Pattern Matching Example.vi 100 KBHi there!
The example used can be adapted for comparing two images, however the algorithm and coding for finding the differences is more specific to your actual problem. In terms of the loading and displaying of the images, this can be done in the same way.
Once you have some sort of algorithm, then you can automate the learning and matching by simply wiring them in order. (in the example, these are put in case structures as they are waiting on response from the front panel)
I hope that this helps,
Liam A.
National Instruments
Applications Engineer -
I get on the internet with my Ipad2 and when I start typing in the search box the ipad guess' what I want before I finish typing and goes to the internet. How do I fix that?
Yes if you purchase the tethering data plan for your iPhone. See:
iPhone: System requirements for Personal Hotspot -
When I go to restore my phone; is there any way to pick what you want back on your phone or do you have to get everything backed up?
Thank you. I was afraid of that. I backed up from iCloud. I looked at the iTunes one - it had four different ones on there; was hoping I could see because my grandson's phone was redone last year (his mom messed it up then) and didn't know anything was backed up to iTunes. He lost a lot of stuff that time. I'm just trying to get his phone back to par after someone changed his passcode on him as a joke and forgot what they changed it to a few days ago. They should change it so one could go in and pick what they want or don't want. Thank you again for your time. I do appreciate it.
Maybe you are looking for
-
Rounded corners on unordered list
I'd like to be able to have style my vertical menu, made with an unordered list, to have rounded corners. The menu is a fixed width, but the items could sometimes run onto two lines, so the height of each item needs to be flexible. I created images c
-
Automatic installation of JRE to run applet
I would like to check if the user(of my website, where I have an applet) have JRE 1.4.1 on the machine. If not I would like to "force" the user (ask him) to start the automatic installation of JRE. I would like to do this from a JSP page. Anyone who
-
DV NTSC 48 kHz 23.98 - anamorphic?
With reference to my previous question regarding PAL TO NTSC standards conversions, if you look at the last paragraph in this article the writer refers to a sequence set to DV NTSC 48 kHz 23.98. However, I need to do this to an anamorphic film clip -
-
I got some problem for loging in to app store. The screen shown as the attachment image. Could some once please help me how can I solve it??
-
i still use the account to download FREE apps , but i cant perchased or buy new apps