Getting whitespace between bottom of page and bottom of browser.

Happens for a relatively short page (site properties of 1280x800) when browser is resized large (resolution, full screen). The testcode is at http://susandeskotestsite.businesscatalyst.com/news.html
I have (think I have) put the bottom of browser slider at the same position as the bottom of page slider on all the master pages, that doesn' seem to get it.
Would be fine to just have it paint the same color down to bottom of browser.
Thanks

hey, that was it! i had defined different colors as browser fill and that was what was having the dark grey from bottom of page to bottom of browser. your previous fix on sticky footers fixed the problem where i was seeing white below the bottom of the page but only for the width defined in site properties. thanks, wish i could do more than just mark it correct.
as a follow on, the site properties are page width of 1280 and min height of 800. generally looks good, but when you maximize a browser window at 2560 x 1600 you get a lot of browser fill and the 1280 x 800 'page'. i've seen other websites that will stretch the 'page' to be much larger on higher resolution displays. can this be done in muse? would the approach be to define larger page sizes to begin with and then it will be "shrink down" to fit lower browser size/resolutions?

Similar Messages

Hi, I connected to the internet in a different location using ethernet cable and when I got home websites like yahoo wont get to the sign in page and other sites too...weirdly facebook and google works ...please help...tearing my hair out!!!

Question
Hi, I connected to the internet in a different location using ethernet cable and when I got home websites like yahoo wont get to the sign in page and other sites too...weirdly facebook and google works ...please help...tearing my hair out!!!

and now, when i tried to check again my network preference below the airport tab is showing a message that
"my airport does not have an IP address and cannot connect to the internet!"
then after seconds it will goes back to the first message that
"airport has the self assigned IP address etc....."
i don't know whats going on now!
airport tab is not showing green color anyway! i'ts always in yellow!
i tried turning it on and off but nothing happen! HEEELLLLPP!!!!

When using reader, the font gets very large on last page and I cant change it

when using reader, the font gets very large on last page and I cant change it

You cannot edit PDF files with Reader. You can change the View options to make what you see smaller. View -> Zoom

Diff between regular portal page and content area page?

Hi.
I have a content area page. Because I thought it would be nice to have "Edit Page" link on the page, I created a new portal page (yes, a portal page vs. a content area page).
I created 2 regions.
Region 1, portlet nav bar portlet from my content area.
Region 2, root folder from my content area
When I use the page, clicking on anything in the nav bar portlet takes me to a new page (my content area page), instead of updating the folder portlet on my new portal page.
Is this by design?
What the difference between a portal page and a content area folder?
Thanks a bunch!
Phillip

Phillip,
The two are indeed subtly different. The experts are on the content area forum but basically a content area page is designed to automatically provide easy navigation within a content area. This includes automatically "doing the right thing" for the navbar portlets.
Note the links on the navbar portlet and their respective targets. They always target the content area page so that the navigation in a content area is seamless (i.e. the middle region updates w/ the current folder).
Steve

Every time i try to download something, i get redirected to the home page and nothing happens (mac osx mavericks, 10.9.4) DETALS INSIDE!

so basically I'm on a Macbook Pro and i have osx mavericks 10.9.4
i tried to download HotSpot Shield. i go to their home page and click download and i get redirected to the home page and there is no download, NOTHING HAPPENS.
same thing with trying to download magnet links and .torrent files on Piratebay.se. i click "Get this Torrent" and i get REDIRECTED TO THE HOME PAGE. the .torrent file doesn't appear in Downloads. NOTHING HAPPENS!!
please help me. PLEASE!!

Other browsers that you can look at:
* http://caminobrowser.org/download/releases/
* [http://en.wikipedia.org/wiki/ICab iCab]: http://www.icab.de/
* http://www.seamonkey-project.org/releases/seamonkey1.1.19

Trying to log into firefox but keep getting firefox is in offline mode and can't browse the web, I've unchecked the work offline in the file menu but still get error message...

trying to log into firefox but keep getting firefox is in offline mode and can't browse the web, I've unchecked the work offline in the file menu but still get error message...

The work offline option can be found from Firefox button -> Web developer or from the menubar toolbar -> Work offline (Or at least thats what happens in Windows).
Have you any other reason for being offline; router off, firefox not dialing up or whatever. Or is security software or a firewall blocking firefox, or a network connection, or firefox setting etc set wrongly.
See also
*[[cannot connect after upgrading firefox]]
*[[options window - advanced panel]]
* [[error loading web sites]]

Difference between content area page and page

Can someone point me to doc or tell me what is the difference
between content area page created in Content Area Manager and
the page created in create page tool ?
I'm really confused.
Thanks.
Regards,
Maggie

Essentially they're the same.
The CA page get's implicitly created when you create the CA
because architecturally when we display content for you to work
with we need a place to post the navigator portlet and the
content portlet.
In the next release this will change, there will be only one
type of page, and you will be able to add content and/or
portlets to it.
HTH
Jason Pepper

Have set Yahoo Mail as my mailto yet when I try to "send a link" I get a Yahoo sign in page and am then taken to my inbox. How can I get an email box to send the link?

I can't get Firefox to send either photos out of Picasa or "send a
link" using my Yahoo!Mail option. Have set Yahoo as my default
and have set Yahoo as my mailto using tools/apps. When I
use "send a link" I am sent to my Yahoo sign in page and it takes
me to my inbox. How can I get a blank email form to come up?

Typing in additional text seems to get the job done. This seems to be a feature of the latest IOS update, I have never had the problem before the last update.
I use the box with the arrow just to the left of the URL block at the top of the page to send myself links to pages of interest. Adding the extra text seems like a pointless step, but it does work.
Thanks.

Have used firefox for 3 years, have a new computer now and every time I go into my normal places I get a warning about encrypted page and third party viewing, please help!

I have used Mozilla Firefox for 3 years with no issues. I have now purchased a new laptop (Samsung) and cannot access my regular sites (like Windows Live or my banking, most everything) without getting a Yellow waring arrow stating that I am going into an encrypted page and third parties are able to see what I am doing. I am very concerned if others are having access. My bank says it has nothing to do with them...it is an https secure site. I still have major concerns, please help!

For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa

When I try to open Firefox by clicking on the desktop icon, all I get is a Bing search page and no Firefox.

When I click on the Firefox desktop icon, I get a Bing search page. Nothing relating to Firefox is evident and the only way I can get out of the Bing search page is using Control/Alt/Delete. I can't access anything in Firefox at all.

A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*http://kb.mozillazine.org/Browser_will_not_start_up
Can you start Firefox in Offline mode via the Profile Manager
*http://kb.mozillazine.org/Profile_Manager
If there is a problem with searching via the default about:home page then try to reset the search engine used on the about:home page.
Reset the browser.startup.homepage_override.mstone pref via the right-click context menu to the default on the about:config page and close and restart Firefox to restore the about:home page to its default.
*http://kb.mozillazine.org/about:config
#Open the about:config page via the location bar
#Type in the Filter bar: mstone
#Right-click the browser.startup.homepage_override.mstone line and select: Reset
#Close and restart Firefox
If this didn't help then delete the delete the chromeappsstore.sqlite file in the Firefox Profile Folder and repeat the above.
You can reset some preferences to the default with the SearchReset extension:
*https://addons.mozilla.org/firefox/addon/searchreset/
Note that the SearchReset extension only runs once and then uninstalls automatically, so it won't show on the "Firefox > Add-ons" page (about:addons).

I can't get my documents on Numbers, pages, and keynote to print on a wifi printer without airprint. Any suggestions?

How would I go about making my documents in Numbers, Pages, and Keynote print on a printer that is not airprint compatable?

Either get a air printer that works with this feature or use iCloud or email. Email it to an email and print it off from a computer. Or option 2- if you have your ICloud setup, go to iCloud.com. Hit iWork. Your documents will be there to print off.

Get items between in the publishingstartdate and publishingend date in a content type.

Hi,
I have a content type that has two site columns publishingStartdate and publishing end date.
The content type is added to a document library.
When I create an item of the content type then it gives two options for publishing start date as immediately and then a date fiel.d
For publishing end date as never and a date control.
Now I want to be able to get only the results which are published as in todays date is in between publishing start date and end date.
But it seems publihsingstart date and publishingend date fields are text type hence I cannot run CAML Query with Greater than and less than.
Is there a way to get the items and run the caml quey

Hey Dennis,
Thanks for the reply.
But I am facing a strange issue. That is I also want to be able to get only those items contain certain keyword in the title column.
I am using the following query, But it is not giving the right results. Here is the query
<Where>
<And>
<Or>
<And>
<Or>
<And>
<BeginsWith>
<FieldRef Name='ContentTypeId'
/>
<Value Type='ContentTypeId'>{0}</Value>
</BeginsWith>
<IsNull>
<FieldRef Name='PublishingStartDate'
/>
</IsNull>
</And>
<Leq>
<FieldRef Name='PublishingStartDate' />
<Value Type='DateTime'>
<Today />
</Value>
</Leq>
</Or>
<IsNull>
<FieldRef Name='PublishingEndDate' />
</IsNull>
</And>
<Geq>
<FieldRef Name='PublishingEndDate' />
<Value Type='DateTime'>
<Today />
</Value>
</Geq>
</Or>
<Contains>
<FieldRef Name='Title' />
<Value Type='Text'>{1}</Value>
</Contains>
</And>
</Where><OrderBy><FieldRef Name='PostedDate' Ascending='False' /></OrderBy>
But it is giving me incorrect results.
Should I be using joins in SPQuery.

How can I use Automator or AppleScript to get text from a web page and paste it in execl?

I don't know how to make scripts or complexed automator workflows... that's why I'm asking.
I'm trying to make a simple app or script to ask me what text to extract from a web page, like name, address and phone number of a web page and paste each one of these data in the righ cell of excel.
I was thinking to promt a request from automator or an applescript to ask me which text to extract from the page or to look throught the HTML of the page to search for specific html tags, from which extracting text and then importing it, or paste it to the specified execl cell. Name in the name cell, address in the address cell and so on.
Can somebody help me to make this script?
If you know an alternative, like a software that already do this or another language to use, please tell.

Try holding down the alt key as you mark the text to be copied. You can then copy columns to table text.

Difference in credit between the online page and S...

Hello
There seems to be some discrepancy between my online credit balance, and what shows up on the header of my Skype. I added the credit yesterday night, the web page got updated automatically, but the desktop Skype is still lacking. On my Android on the other hand, the credit shows up normally. I am confused because, if anything, I would expect the opposite. Is there any way I can shake my desktop into compliance?
Sorry if this is the wrong place to post this.

RollingInTheDee wrote:
Is there any way I can shake my desktop into compliance?
Hello
Power down your desktop, wait for 5 minutes and reboot. This should force the client to update.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

How to get relationship between material document no and accounting documen

Hi Experts !!
I want to create a report displaying accounting document no and GL account no buy providing PO No and material document no (MIGO No).
I want a database table from where I can get material document no (MIGO No)(MBLNR/BELNR) and accounting document(BELNR) no both.Currently I am using
BSEG for getting HKONT,EBELN,BELNR
MSEG for getting MBLNR by using EBELN (P.O. NO)
BKPF for getting BUDAT.
the problem came with EBELN (P.O. NO) as repeated entries are there.
I am unable to write query for getting MBLNR and BELNR for same EBELN (P.O. NO).
Is there any table where MBLNR and BELNR are related to each other??????
Thanks in advance !!!!

Check this thread, if this helps.
[url] Link between MKPF table and EKKO or RBKP table [url]
I've done this as well earlier to create a custom document flow for archived documents where from the EBELN i've found all the related documents. Hope this helps.

Getting whitespace between bottom of page and bottom of browser.

Similar Messages

Maybe you are looking for