Getting "Wrong password supplied" on deployment when using correct one

Hello,
I have configured the runtime systems on the CMS but whenever I try to deploy through TCS/Deployer I get:
:cannot create a connection for the buildspace:   //connect to deploy tool failed:Server did not accept login request as apiadmin on port 50018 - Wrong password supplied - Request for Logon rejected. Remaining logon attempts until SDM server will be shut down: 2
If I'm using the same SDM passwod on NWDS on the same server it's working. Any idea why....?

hi,
i had recently faced this issue.. bt dnt know how to exactly to do.. my basis team clear log from OS level.. dnt know exactly wot log.. but it's related to DB log issue..
Regards,
Jigar Oza

Similar Messages

  • Why do i get "wrong password" when i try to log on to the wifi on my ipad 3?

    I have 2 laptops, 2 ipones (5 and 4s, running on ver 6.1.4), an ipad mini and an ipad 3 in my home.
    I'm using my wifi successfuly with every device except for my ipad 3.
    on the "wireless" tab, i can see the network, i'm trying to type the password but i keep on getting "wrong password".
    The ipad can use wifi in other places with passwords.
    I checked how im writing and tried to type again on other devices, that's not the problem. Its not a problem with capitals or o-0 or something like that.
    I've tried reseting the network settings,  reseting my router, reseting my ipad (pressing "off button" + "home button"). I've tried changing password on my router, without succuess.
    that is really annoing, you're paying a lot for something that's suppose to work perfectly, and you get problems like that.
    I really need wifi on my ipad, and I've searched forums all over the internet for a solution. it turnes out that a lot of people are experiencing the same problem, whitout a proper solution.
    please help

    Restore the iOS software.
    Transfer purchases into iTunea, backup your iPad, restore to factory settings, restore from the backup and sync with iTunes and then try again.
    iTunes: Restoring iOS software - Support - Apple

  • Wrong number of parameters exception when using PreparedStatement

    Hi,
    I'm getting Wrong number of parameters exception when using a prepared statement. It's very weird. The code is:
    sqlstmt="update blah1 set blah2=? where blah3=?";
    myps = Conn.prepareStatement(sqlstmt);
    myps.setString(1, p1);
    myps.setInt(2, p2);
    myps.executeUpdate(sqlstmt);
    The error is:
    SQLException: [IBM][CLI Driver] CLI0100E Wrong number of parameters. SQLSTATE=07001:07001
    Could someone please help? Thanks
    Mahdad

    Hi and thanks for the reply.
    Actually this is the try block...
    The variable's defintions are correct.
    PreparedStatement myps;
    try {
    sqlstmt="update blah1 set blah2=? where blah3=?";
    myps = Conn.prepareStatement(sqlstmt);
    myps.setString(1, blah4);
    myps.setInt(2, blah5);
    myps.executeUpdate(sqlstmt);
    catch (SQLException e) {
    System.out.println("SQLException: " + e.getMessage() + ":" + e.getSQLState());
    blah6++;

  • I want to link my other email accounts to my imail so I can see them all at once. When I enter their account information, imail says I'm using the wrong passwords but I know they are correct. What now?

    I want to link my other email accounts to my imail so I can see them all at once. When I enter their account information, imail says I'm using the wrong passwords but I know they are correct. What now?

    This was EXACTLY what I needed about the purchases I made from my device. However, is there a way to re-download other ones you've made from a computer? Because I realized some of them were not just purchased from my device.
    This is a picture of what it looks like now:
    http://tinypic.com/r/107quxu/7
    As you can see, the stuff circled in red doesn't give me an option to download from Cloud Beta because it already says "downloaded".
    any way to get around that?

  • I am still getting redirected to various web sites when using Safari.  My PC is not affected but my I phone and I pad are.  I have reset my router and changed my admin name and password.  I am still being redirected.

    I am still getting redirected to various web sites when using Safari.  My PC is not affected but my I phone and I pad are.  I have reset my router and changed my admin name and password.  I am still being redirected.

    Chances are you mis-typed a character in the Wifi password and the devices saved that information.  Now whenever you try to connect the device refers to the wrong password and the Jetpack does not accept your connection.  Tell your devices to forget the wireless connection and start over.
    Once you enter the proper WiFi credentials the Jetpack will allow you to connect.

  • In iPhoto, when i try to email a photo using "share", I keep getting"username/password" not recognized. It used to work automatically before.

    I cannot email  a photo using iPhoto "share. I keep getting "username/password not recognized". I used to use this function all the time but all of a sudden, I keep getting this message.

    In iPhoto, open Preferences (under iPhoto in the menu bar) and click the "Accounts" tab on top.  Make sure your email account(s) is/are set up there correctly, just as they are in Apple's Mail.  Make sure the password in included.

  • Get rid of the initial asterisk when using PasswordField masking in console

    Hi!
    How can I get rid of the initial astrerisk when using the PasswordField script from Sun?
    I've tried to check whether the BufferedReader is empty or not, but with no succes.
    Here comes the code:
    PasswordField.java
    import java.io.*;
    public class PasswordField {
        *@param prompt The prompt to display to the user
        *@return The password as entered by the user
       public static String readPassword (String prompt) {
          EraserThread et = new EraserThread(prompt);
          Thread mask = new Thread(et);
          mask.start();
          BufferedReader in = new BufferedReader(new InputStreamReader(System.in));
          String password = "";
          try {
             password = in.readLine();
          } catch (IOException ioe) {
            ioe.printStackTrace();
          // stop masking
          et.stopMasking();
          // return the password entered by the user
          return password;
    }EraserThread
    import java.io.*;
    class EraserThread implements Runnable {
       private boolean stop;
        *@param The prompt displayed to the user
       public EraserThread(String prompt) {
           System.out.print(prompt);
        * Begin masking...display asterisks (*)
       public void run () {
          stop = true;
          while (stop) {
             System.out.print("\010*");
          try {
             Thread.currentThread().sleep(1);
             } catch(InterruptedException ie) {
                ie.printStackTrace();
        * Instruct the thread to stop masking
       public void stopMasking() {
          this.stop = false;
    }

    Hello Yajai,
    The example program will use the default value for timeout, 10 seconds. To change this, you will have to set the Stream.Timeout value. I inserted this function into the example and set it equal to -1, and the program will wait indefinitely for the trigger signal without timing out. Please see the attached image to how this was implemented.
    I hope this help. Let me know if you have any further questions.
    Regards,
    Sean C.
    Attachments:
    SetTimeout.bmp ‏2305 KB

  • My files, photos, email files, software programs, and all information did NOT transfer over to Mavericks (from Mt. Lion).  How do I get all my stuff to appear when using Mavericks?

    Will someone please help me?
    My files, photos, email files, software programs, calendar info, and all information did NOT transfer over to Mavericks (from Mt Lion).  How do I get all my stuff to appear when using Mavericks?
    My email did transfer over.
    Thank you.

    First click on the Apple > Logout and Log back in or restart the unit see if that solves it.  If it doesn't do you have a backup of your system prior to upgrade?  Check Disk Utility and see how much space is being used to make sure the drive wasn't somehow erased.

  • When I got my ipod I made an account with iTunes from my ipod.yesterday, I made a password lock to get into my ipod and I couldn't get into it even though I did the correct one. Now it says"connect to iTunes" BUT I can't because I never registered. HELP!!

    When I got my ipod I made an account with iTunes right from my ipod.Yesterday, I made a password lock to get into my ipod and I couldn't get into it even though I did the correct one. Now it says"connect to iTunes" BUT I can't because I never registered on the computer. I've tried holding the home and sleep/wake button for 10 sec and then only the home for 5sec and that might have reset it, but it didn't help. If any of you guys know what to do so I can unlock it I would appreciate it VERY much.

    If you haven't done so install iTunes on your computer. http://www.apple.com/itunes/
    Follow the instructions here: iPhone and iPod touch: Unable to update or restore

  • New iPad 5 pixels getting stuck (Rewind, Play, Fast Forward) when using apple tv. Leave ghost buttons on screen. Do I return? Please advise.

    New iPad 5 pixels getting stuck (Rewind, Play, Fast Forward) when using apple tv. Leave ghost buttons on screen. Do I return? Please advise.

    edit: iPad 4

  • Prompting for password and username only when using dynamic parameters

    Post Author: Co3023
    CA Forum: Crystal Reports
    How do I stop CR XI prompting for password and username only when using dynamic parameters. When no dynamic parameters are used CR XI isn't prompting for the DB user name and password. The report is run from an application which passes the user name and password. I am using Oracle and the problem is both with the native oracle driver and the ODBC RDO driver.

    Post Author: jehanzeb
    CA Forum: Crystal Reports
    I didnt ask you to change it to static I said I took the parameters totally out of the report. Saved it. Then re-enter the dynamic parameters into the report and it worked for me. That might have worked for you, not sure why you changed it to static.
    Ok I have just created a quick report using dynamic parameters, it didnt ask me for the username password.
    Can you create a sample report - just to test the db? and see if it works? add only 1 or 2 fields in the report, create parameters (dynamic) and see if it works
    why don't you embed the username and password in your application, it won't ask for username password then.

  • HT204291 Does anyone know why when streaming a movie from my iMac the screen on my tele goes grey but I still get audio. It only happens when using the DVD application on the mac. iPhoto streams fine.

    Does anyone know why when streaming a movie from my iMac the screen on my tele goes grey but I still get audio. It only happens when using the DVD application on the mac. iPhoto streams fine.

    You are prevented from Airplay mirroring certain things like DVD content as the material is usually protected so you get a checkerboard type display.  I think there is a theoretical risk that the Airplay stream could be intercepted and the protected video copied, albeitin lower quality.
    Apple may be being cautious or are required to do so with the DVD player app by movie studios/licensing authorities.  It makes no sense to the average consumer who is just trying to send their purchased DVD to the TV via the computer and AppleTV.
    Playback in something like VLC should work - not tried it myself but others have commented it doesn't have the restriction.

  • I'm trying to read some XML data from temperature logger over my network. I'm using LabView version 2009 sp1. I'm using the URL Get Document Vi. It works fine when using Internet sites like google or foxnews etc...

    I'm trying to read some XML data from temperature logger over my network.  I'm using LabView version 2009 sp1.  I'm using the URL Get Document Vi.  It works fine when using Internet sites like google or foxnews etc...
    When I use it with my temperature logger most of the time I get an Error 66...but some times it does work and actually retrieves the document. 
    I can use the same address "http://172.22.21.68/XMLfeed.rb" (Internet Explorer or Google Chrome) in my browser and get a response every time.  When accessing from my browser the server in the temperature logger does take around 6 seconds to respond, but it does respond every time. 
    Is the URL Get Document Vi exceeding a timeout?  If so, where can I set it to wait longer?
    Attachments:
    Error 66.jpg ‏183 KB

    It looks like the TCP Buffered Read has a 2.5 sec timeout, I believe that is where I had trouble as well.  Try creating your own URL Get HTTP Doc vi in which you call URL Get Document in normal mode, with an appropriate number of characters to fetch (enough characters so that you capture all the important data in the XML file).
    Attachments:
    ex1.PNG ‏33 KB

  • I lost my password and i could get into my phone, i tried but it said connect to itune. i did, but i did not get any result. please give me some advises how do i get my password back or reset with a new one?

    Ipjone6, silver, 64GB
    I lost my password and i could get into my phone, i tried but it said connect to itune. i did, but i did not get any result. please give me some advises how do i get my password back or reset with a new one?

    how to reset password:
    https://iforgot.apple.com/password/verify/appleid

  • When using earphones one side is not clear

    When using earphones one side is not clear.

    Make sure you have pressed the plug completely into the headphones jack.  There is a definite "click" when fully seated, and you may need to push harder than expected.

Maybe you are looking for