Getting Z68A-GD80 (G3) to wake up every single day...

all,
is there a way to get my PC to boot every single day? I used to be able to do it with a gigabyte mobo, but I don't see the option in my Z68A-GD80 (G3) bios menu (there is RTC alarm, but that seems to be restricted to once a month).
so, is it possible?
if not, how can i configure a wake-up event via win7 x64 (as "OS" seems to be an option in the bios for wake-up events?)
any help much appreciated.

In the UEFI/BIOS, be sure to disable EuP 2013 (C1E might be the other one to disable along with it).
Added: Also disable Spread Spectrum.

Similar Messages

  • Gets so slow that I have to pull the battery every single day!

    I have had this issue from day 1 and is driving me crazy. Have to pull out the battery every single day just to be able to free the memory and so that it can run at a descent speed.
    After taking out the battery, putting it back again and then switching the phone back on I will have a look in the application storage memory which will start at about 120mb. Over the next few minutes or hours the storage memory will get less and less till is sit with about 0 - 20 mb of storage memory. The device will then stop responding then eventually just hanging until I pull the battery then need to follow the process all over again.
    I have up[dated the firmware and restored the phone back to defaults several times with no luck.
    I do not install software on this phone. The only apps I install is watchstrap, twitter and Thelma navigator.
    I have a 2gig memory card in the phone a swell.
    I got to stop myself from throwing this piece of junk against the wall. Cannot wait for my contract to end so I can go for Samsung or android!! Unfortunately I got to wait still over a year. SO FRUSTRATING!!!

    Hi and thank you for the advice.
    I have installed the Blackberry Virtual Expert but does not have an option to see whats eating my memory. The only optioins it gives me is to do  Display tests, Keypad tests, Audio tests and choose test, So i don;t think this software is going help me  A few minutes my Application storage was sitting on 0.00MB and slowing dow and thinking now my memory has gone back up to 16.3MB then back up to 33.7MB.  Its my lucky day but will have to do a battery pull probably laer again.  Just to confirm all the software installed is..
    Telmap navigtor
    Screen Grabber
    Whatsup app
    Facebook app
    Twitter
    Blackberry Virtual Expert. 
    I think what i have to maybe do is to do another factory reset on the phone and install nothing on it. Monitor for a few days and then install one application. Monitor for a few days and so on. It's all i can think of. Thank you for the help anyways

  • 4.7GB Backup every single day?

    What's up with a daily 4.7GB backup? I check some email, hack some PHP code, and that's about it. 4.7GB seems like serious overkill every single day.

    Michael Lunsford wrote:
    It was the Microsoft (surprise) entourage main identity. Apparently, I have managed to store almost 5GB of email over the last two years. I wish I could get rid of it but still keep it just incase.
    There are several possibilities.
    You could move it to your TM drive, preferably in a separate partition.
    You could exclude it from TM.
    You could exclude it from TM but periodically copy it to a file that isn't excluded and would be backed-up. You could even automate this, with an AppleScript or Automator function, scheduled to run daily, or weekly, or whenever is appropriate.

  • Dots (events) for every single day in calendar (NEW issue)

    Ever since I upgraded to FW 2.0 I have had "dots" appear in every single day of the calendar (symbolizing events) even though I have no events for those days.
    Now - I KNOW about the issue with the recurring/repeating events as well as events that "begin" after they "end." That said, I have checked EVERY single event I have in the phone and in the calendar in Outlook and NONE of the events are repeating/recurring and all of them are set up properly with correct start/end times.
    From my searching, the above seems to be what's commonly known to cause this problem. Those don't fit MY problem.
    The odd thing here is, if I go backward in the month view on the calendar on the phone to February, there are no dots. There are also no events. However, if I go to March on the month view in the calendar, every single day has dots (and continues). The really weird thing here is if you look at the calendar in the month view while it's on March, you can see the last week of February at the top. And in that last week, while in the "March" view, the last week of February ALL has dots. But again, if you move back to "February," all those dots that were there disappear.
    So...I'm at a loss now. I've wiped the events off the phone. Edited/pruned/etc. events in the Outlook calendar, and then re-synced with the order to overwrite that which is on the phone. Still no luck. Is this a glitch that needs to be corrected with new FW? Would a restore help? I just don't really know anymore..
    Thanks,
    John

    I am having the same issue. However, I am syncing my calendar to my work computer and the issue presented itself when I upgraded to Office 2007 from 2003. I have since removed Office '07 and did a restore to my iphone which cleared the issue. Then did a sync again to Office 2003 and the issue re-appeared. Not sure if '07 added something to my calendar that is hidden but it is very frustrating.

  • Every single day.

    I'm using a BEFW111s4 wireless router, and every single day at right around 4 PM, my wireless connection just stops working. It will work again if I reset my router, but it will go off again within 10 minutes. This entire cycle will repeat itself until around 7PM. Why does this happen?
    It's not related to the other two people in the house using the router, because it will even do it when I am the only person online. I've tried multiple "fixes" but nothing works. Any ideas?

    I think you can try to reset and reconfigure the wireless router .
    Press and hold the reset button for 30 seconds .
    Release the reset button and power cycle the router and modem .
    Connect a computer with the Ethernet cable to the Ethernet port on the router .
    Open the setup page of your router .
    Configure the wireless settings on your router .
    Give a new wireless network name and Save the settings ,
    Connect your wireless computer with the new wireless network name .
    Check if the connection still dropping .

  • How can I block a number that calls me persistently every single day but only shows 3458  it does not show the full 10 digit

    how can I block a number that calls me persistently every single day but only shows 3458  it does not show the full 10 digit so on your block page will not let me block it!!!  So frustrated and I am not answering it with all the hackers out these days I don't want to give them access to my phone.

        @lottsandy
    I can understand your frustrations and concerns with receiving these unknown calls!  I would love to assist you with preventing these types of calls.
    Sounds as though you're receiving some type of telemarketing call.  Although you're unable to add the shorter numbers to your call block list, you can definitely add your number to the National Do Not Call registry http://1.usa.gov/1whONxp.  I hope this will help prevent those unwanted calls.  Thanks!
    AnthonyTa_VZW
    Follow us on Twitter @VZWSupport

  • Why does Firefox 21 close first session every single day?

    My girlfriend has a new Vaio laptop running Windows 8 and Firefox 21.
    Every time she starts Firefox for the first time (after powering up the laptop), the browser closes immediately upon her selecting a bookmark from the bookmark toolbar (usually Gmail) or whatever the first task is that she asks Firefox to do for her. (i.e., search or open a URL.)
    I've already reset Firefox and confirmed that hardware acceleration is NOT enabled. (We've replicated the problem after completing these steps.)
    The last four crash reports are below.
    http://crash-stats.mozilla.com/report/index/bp-1030722a-36af-425a-a6dc-9b7de2130607
    http://crash-stats.mozilla.com/report/index/bp-ddaa2289-9a7f-40b7-9e05-57f272130605
    http://crash-stats.mozilla.com/report/index/bp-b06fe87b-748a-42dd-912f-cc5d32130605
    http://crash-stats.mozilla.com/report/index/bp-ee8ecce2-8878-4166-8135-362b92130531
    Needless to say, this ongoing problem is very frustrating. Any suggestions on how we can make her browser work more reliably would be greatly appreciated.
    Thank you!

    hello, i think the crash might be triggered by Whitesky's ID Vault which is installed on the notebook...
    https://bugzilla.mozilla.org/show_bug.cgi?id=879354

  • 1/3 of my addons don't work/places.sqlite corrupts every single day

    You've got to stop throwing these updates out like cat vomit.
    PLEASE notify the addon makers so that they have time to update the addon for the latest version.
    One-third of my addons don't work with 5.0. Why can't you put a addon check BEFORE the installation so that one can decide whether the upgrade is worth it.
    My screen reader doesn't work. They just updated the software less than a month ago. Is this rapid cat-vomit pace of software updates really necessary??
    There are some addons that are absolutely necessary. I cannot use Firefox without a screen reader. Why you don't have one as part of the software installation 20+ plus years after ADA is beyond me.
    Now, I'm going to have to spend the afternoon uninstalling this piece of useless crap and reinstalling 4.0.1.
    Firefox is seriously beginning to not be worth the effort. It's a resource pig. You have to modify it (addon) to get it to work reasonably. Not really worth the effort.
    I've had a problem with the history going into the wrong date bucket for at least a month (probably longer) ... see https://support.mozilla.com/en-US/questions/821193. No response to my post. I'm not the only one with the problem.
    Why keep updating buggy software and not fixing any of the problems that people are having??

    95% of the most popular add-ons hosted at AMO are 5.0 compatible (or beyond 5.0). <br />
    https://addons.mozilla.org/en-US/firefox/compatibility/report
    If you repeatedly have problems with your select add-ons not being updated in time for the release of a new version of Firefox, why do you install the upgrade as soon as it comes out? Wouldn't it make more sense to give the developers of the extensions that you use a little bit of time to update their stuff before agreeing to install the Firefox upgrade?
    IMO, you need to take the time for a reality check, before setting yourself up for disappointment time after time.

  • Why Must I License and Activate Every Single Day?

    Every day I'm told I'm at 24 days left on a trial, or -1 days left and asked to sign in and license.
    Which I do.
    Same thing happens next day.

    I've seen the products reverting to trial with incorrect number of days remaining happen before but launching the Adobe Application Manager should now update to latest version and correct the issue. See this document and the Additional details section.
    http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
    You should be able to just launch the Adobe Application Manager via the Start Menu (Windows) or alias in the Applications folder (Mac)
    -Dave

  • OS X crashes EVERY.SINGLE.DAY. - Advice needed please

    Hi all,
    Unfortunately search is disabled, so my apologies if this has been asked 100 times before.
    Hopefully somebody can help me out.
    I have a MBP running 10.5.4 that is less than 2 months old.
    Everything is great about it, except for the very annoying fact that it crashes every day.
    The grey curtain comes down and I manually have to restart.
    It happens totally randomly, nothing in particular seems to trigger it.
    I've verified the disc and permissions in disc utility and it says there are no problems.
    Here are the last 3 panic logs (there's nothing in my crashreporter, only panicreporter), maybe someone can see the problem?
    Tue Jul 15 22:12:21 2008
    panic(cpu 1 caller 0x001431A9): "zalloc: \"kalloc.8192\" (38 elements) retry fail 3"@/SourceCache/xnu/xnu-1228.5.20/osfmk/kern/zalloc.c:770
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x40563c88 : 0x12b0fa (0x4592a4 0x40563cbc 0x133243 0x0)
    0x40563cd8 : 0x1431a9 (0x45aef0 0x459b38 0x26 0x3)
    0x40563d38 : 0x12fa53 (0x1ec92d8 0x1 0x6c 0x1a236f)
    0x40563d68 : 0x12fa72 (0x1690 0x1 0xb0000000 0x0)
    0x40563d88 : 0x11d99f (0x1690 0x0 0x1b635 0x0)
    0x40563db8 : 0x12d0f6 (0x10f0 0x0 0x0 0x0)
    0x40563df8 : 0x126257 (0xac35400 0x0 0x6c 0x40563ee4)
    0x40563f08 : 0x1973dd (0x40563f44 0x0 0x0 0x0)
    0x40563fc8 : 0x19f3b3 (0x47de720 0x0 0x1a20b5 0x4d26ba0)
    No mapping exists for frame pointer
    Backtrace terminated-invalid frame pointer 0xb007e848
    BSD process name corresponding to current thread: hidd
    Mac OS version:
    9E17
    Kernel version:
    Darwin Kernel Version 9.4.0: Mon Jun 9 19:30:53 PDT 2008; root:xnu-1228.5.20~1/RELEASE_I386
    System model name: MacBookPro4,1 (Mac-F42C89C8)
    Mon Jul 14 23:10:55 2008
    panic(cpu 1 caller 0x001431A9): "zalloc: \"kalloc.8192\" (36 elements) retry fail 3"@/SourceCache/xnu/xnu-1228.5.20/osfmk/kern/zalloc.c:770
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x34816968 : 0x12b0fa (0x4592a4 0x3481699c 0x133243 0x0)
    0x348169b8 : 0x1431a9 (0x45aef0 0x459b38 0x24 0x3)
    0x34816a18 : 0x12fa53 (0x1ec02d8 0x1 0x34816a58 0x0)
    0x34816a48 : 0x12fa72 (0x1800 0x1 0x24 0x18)
    0x34816a68 : 0x404042 (0x1800 0x212 0x34816ac8 0x1057e34)
    0x34816a88 : 0x10580b6 (0x1800 0x0 0x0 0x0)
    0x34816ac8 : 0x10590d6 (0x24322000 0x34816d9c 0x34816da0 0x34816da4)
    0x34816b38 : 0x43ccdc (0x24322000 0xe141c74 0x34816d9c 0x28)
    0x34816b78 : 0x43d88f (0x10b84a8 0x24322000 0xe141c74 0x28)
    0x34816bd8 : 0x43b438 (0x24322000 0xf 0x34816c20 0x0)
    0x34816cf8 : 0x18d918 (0x24322000 0xf 0xe141c70 0x0)
    0x34817db8 : 0x12d17e (0xe141c48 0x234dd5a0 0x0 0x0)
    0x34817df8 : 0x126257 (0xe141c00 0x0 0x7c 0x34817ee4)
    0x34817f08 : 0x1973dd (0x34817f44 0x0 0x0 0x0)
    0x34817fc8 : 0x19f3b3 (0x4d3d180 0x1 0x1a20b5 0x4a6b4f0)
    No mapping exists for frame pointer
    Backtrace terminated-invalid frame pointer 0xbfffdba8
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.GeForce(5.2.8)@0x103a000->0x10c8fff
    dependency: com.apple.NVDAResman(5.2.8)@0xc06000
    dependency: com.apple.iokit.IONDRVSupport(1.5.2)@0xbf8000
    dependency: com.apple.iokit.IOPCIFamily(2.4.1)@0x5c1000
    dependency: com.apple.iokit.IOGraphicsFamily(1.5.2)@0xbdc000
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    9E17
    Kernel version:
    Darwin Kernel Version 9.4.0: Mon Jun 9 19:30:53 PDT 2008; root:xnu-1228.5.20~1/RELEASE_I386
    System model name: MacBookPro4,1 (Mac-F42C89C8)
    Sun Jul 13 10:19:05 2008
    panic(cpu 0 caller 0x001431A9): "zalloc: \"kalloc.8192\" (33 elements) retry fail 3"@/SourceCache/xnu/xnu-1228.5.20/osfmk/kern/zalloc.c:770
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x34c4a968 : 0x12b0fa (0x4592a4 0x34c4a99c 0x133243 0x0)
    0x34c4a9b8 : 0x1431a9 (0x45aef0 0x459b38 0x21 0x3)
    0x34c4aa18 : 0x12fa53 (0x1eda2d8 0x1 0x34c4aa58 0x0)
    0x34c4aa48 : 0x12fa72 (0x1800 0x1 0x2000002c 0x18)
    0x34c4aa68 : 0x404042 (0x1800 0x212 0x34c4aac8 0x1070e34)
    0x34c4aa88 : 0x10710b6 (0x1800 0x0 0x0 0x0)
    0x34c4aac8 : 0x10720d6 (0x24356000 0x34c4ad9c 0x34c4ada0 0x34c4ada4)
    0x34c4ab38 : 0x43ccdc (0x24356000 0x4327b74 0x34c4ad9c 0x28)
    0x34c4ab78 : 0x43d88f (0x10d14a8 0x24356000 0x4327b74 0x28)
    0x34c4abd8 : 0x43b438 (0x24356000 0xf 0x34c4ac20 0x0)
    0x34c4acf8 : 0x18d918 (0x24356000 0xf 0x4327b70 0x0)
    0x34c4bdb8 : 0x12d17e (0x4327b48 0xe88e5a0 0x0 0x0)
    0x34c4bdf8 : 0x126257 (0x4327b00 0x0 0x7c 0x34c4bee4)
    0x34c4bf08 : 0x1973dd (0x34c4bf44 0x0 0x0 0x0)
    0x34c4bfc8 : 0x19f3b3 (0x4808940 0x0 0x1a20b5 0x4808940)
    No mapping exists for frame pointer
    Backtrace terminated-invalid frame pointer 0xbfff5d08
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.GeForce(5.2.8)@0x1053000->0x10e1fff
    dependency: com.apple.NVDAResman(5.2.8)@0xc1f000
    dependency: com.apple.iokit.IONDRVSupport(1.5.2)@0xc11000
    dependency: com.apple.iokit.IOPCIFamily(2.4.1)@0x5cd000
    dependency: com.apple.iokit.IOGraphicsFamily(1.5.2)@0xbf5000
    BSD process name corresponding to current thread: ScreenSaverEngin
    Mac OS version:
    9E17
    Kernel version:
    Darwin Kernel Version 9.4.0: Mon Jun 9 19:30:53 PDT 2008; root:xnu-1228.5.20~1/RELEASE_I386
    System model name: MacBookPro4,1 (Mac-F42C89C8)
    Thanks in advance!

    The last few lines of the kernel panic report seems to be pointing at NVIDIA though.. I'd assume it's something to do with the graphics subsystem.
    -quote-
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.GeForce(5.2.8)@0x103a000->0x10c8fff
    dependency: com.apple.NVDAResman(5.2.8)@0xc06000
    dependency: com.apple.iokit.IONDRVSupport(1.5.2)@0xbf8000
    dependency: com.apple.iokit.IOPCIFamily(2.4.1)@0x5c1000
    dependency: com.apple.iokit.IOGraphicsFamily(1.5.2)@0xbdc000

  • HT3728 since Oct 25 my time capsule is not working properly. I enter the time machine to check my backups and the only thing I see is balck screen on every single day since I put it to work on my house. Any ideas on what's going on?

    I am having problems with my time capsule.
    It's not backing up... if I enter the time machine, all I see is a black page, any day I look, since the day I bought it.
    Was not like this before Oct 25...
    Any ideas on what's going on and what should I do to make it work again?

    Check the USB cable first to make sure that it is operating correctly on another connection.
    You may need to use a powered USB hub with the drive since the USB port on the Time Capsule is not a high powered port like you have on your Mac.
    You may need to use the powered hub even if the hard drive has its own external power supply.

  • TS1398 I have to enter my wifi password every single day , why is this ?

    Why

    Try the following:
    Rather than touching your network name to connect touch Other... instead
    Enter your network name and security type
    Enter your password
    See if your network is remembered.

  • IPhone 5s "searching" every single morning

    A little background:
    *I was an Altell customer that was grandfathered in to AT&T (When they bought Altell) with unlimited data and my service started on a brand-new AT&T iPhone 5s on February 3rd, 2015.
    *Several weeks after the phone was activated, I dropped it and busted the screen. I contacted the insurance company and they sent me a phone at the cost of $200. That particular phone had an issue where the person I was talking to could barely hear or understand me. I contacted the insurance company and they sent me another replacement.
    *That phone had an issue with the GPS not working correctly on any app that required it. On April 10th, I went to the Apple Store at and the very helpful Genius Bar technician gave me a replacement on the spot.
    *In July, I woke up on a Friday morning and my phone was "searching" in the upper left corner. I contacted AT&T and it was not an issue on their end, but I was advised to go to the local store to get a new SIM card.
    *That became an issue that required hours of phone time with AT&T's computer system not allowing them to update my SIM card because of some issue with an embedded plan feature that carried over from Altell and they had no idea how to fix it. They eventually got it taken care of, but my phone continued to give me trouble by continually "searching".
    *It was at that time that I went to the Apple store to get help. I saw the same technician as in April and he informed me that my phone was out of warranty. I am not certain how that happened because my original 5S from AT&T was only activated by them on February 3rd. He said it seemed to have a hardware problem. He did, however, order me a replacement which came in the following week.
    *When I went to pick up that phone the technician had a little trouble getting it to activate, but eventually did and sent me on my way. That phone continues to have the same issue as I originally had with the "searching".
    Currently:
    *I wake up every single day with my phone "searching". Once I go to the area of my house where it can detect our wifi, it either (1) finds signal (2) Asks me for my apple ID to activate (3) or I have to turn it off using both buttons and then turn it back on. (sometimes, I have to do all of the above)
    *It had not been happening during the day, but today it has done it several times throughout the day
    Things I have done to try and solve the problem:
    *Replace the SIM card
    *Complete restore without adding a backup
    *Complete restore with a backup
    *Update Network settings
    I have done all of the above several times and continue to have the same problem. I also did the restore on two different computers. I am baffled as to what to do. I feel like I have done everything I could to just have a dependable phone and in February I had a brand new phone from AT&T. I even got desperate and wanted to buy a new phone outright only to find out I am looking at $500+ for a 5S unless I do a contract through AT&T. That would cause me to lose my unlimited data that I was grandfathered in with. I have felt somewhat bullied by AT&T and I feel stuck with what is a faulty phone that was suppose to be a "fix" for my troubles.

    Hello @Jamielous69
    I’m sorry to hear you’re having signal issues; I’d be glad to help you out!
    In order to further assist you, could you please send me a private message providing your:
    Full name
    Wireless number
    Best time to reach you, and alternate contact number if available
    We will reach out to you within 2 business days
    Thank you,
    Charise

  • Z68A-GD80 cannot get Control Center to work...

    Trying to get Control Center to work, keep getting the wonderful: "Driver cannot load" message... then it just stays on the loading screen saying please wait, control center is running. I've tried everything, deleting and re-installing. I'm absolutely positive it's the latest version from the MSI website. I run it as admin, i've got the latest .net version and all that... The only real reason I want to control center is for temps and checking out OC genie. If there's no way to get it working, anyone know of another way to monitor cpu core temps and have a really really really retard proof explanation or presets for overclocking?
    My Rig
    Antec 1200
    MSI  Z68A-GD80
    16G Ram *Gskill*
    i7-2600 @ 3.4Ghz BIOS: 11/01/11 4.06.04
    128 Kingston SSD
    Windows 7 64bit
    Corsair Gold Series 1200w
    1 nVidia GTX-580

    801greg,
    hey greg i went thru the same **** EXACTLY! finally called apple support and some smart fella finally figured it out...
    it took him awhile...
    at the point where you hit the 'apply' key instead hit the 'return' key... it will then activate your quicktime into pro...
    very sloppy work apple...
    btw, i'm having a dickens of the time trying to learn to edit movies in quicktimepro... do you know where the faq or a learning the basics of quicktime pro online manual can be found?
    thanks,
    tws

  • Z68A-GD80 B3 Boot Loop and Failed BIOS LED Flashing

    I've been having "boot loop" issues with my system since it was built in June. Basically, when the system is powered on the lights/fans come on for around 3 seconds then it shuts itself off for another 3 seconds and repeats the loop infinitely. Meanwhile there are no POST code beeps and nothing shows up on screen. I also noticed today that the Dual BIOS control LED is flashing during boot loops indicating that the primary BIOS has failed.
    As this was my first build in quite a while I didn't initially worry about it too much, figuring that it was probably just a BIOS setting or improperly seated hardware issue. Shortly there after my son was born and needless to say there wasn't a whole lot of time to trouble shoot a PC for a couple of months. Fast forward four months later to today and the boot looping is driving me nuts. It seems to occur when the system has been powered down overnight and more frequently if the reset button is used. I've read a lot of stuff saying that the Gigabyte boards are prone to this issue, but can't find anyone else with the same issue on a MSI z68 board. I've check/done the following to try and trouble shoot the issue.
    1. Flash to BIOS 17.3 (twice)
    2. Installed system speaker to hear post codes. Got a whole lot of nothing.
    3. Installed one stick of RAM in slot one. Tried all four sticks. Nothing works.
    4. Set BIOS values to default.
    5. Tried disabling and enabling XMP profiles for the RAM.
    6. Upped the voltage on the RAM to 1.5V, since the board reports an under-volt around 1.48 on auto. No effect.
    7. Disabled PLL overvolt.
    8. Enabled VDroop (still not clear on what this is).
    9. Removed both video cards and used the on chip video. No effect.
    10. Unplugged all USB devices.
    11. Tried XMP enabled and disabled for the memory.
    12. Hard drive plugged in and removed makes no difference.
    13. Bare system with only one stick of RAM installed, no difference.
    11. Lots of other crap that I can't think of right now.
    Any help would be great as I'm at a loss here.
    System specs are as follows;
    Intel 2600K
    Corsair H50 Cooler
    MSI z68a-gd80 B3 with BIOS v 17.3
    PNY Geforce GTX 560 Ti (2x in SLI)
    Linksys Wireless G PCI card
    Crucial Ballistix Sport RAM (4x2GB at 1600 MHz XMP enabled)
    Segate Barracuda 7200 RPM Drive 500GB (2x in RAID0)
    OCZ Vertex2 64 GB SSD as system cache
    Corsair TX750 Power Supply
    Corsair 600t case

    More wierd stuff.
    I couldn't get the board to boot without looping last night, tried the usual unplugging and clearing the CMOS nothing. Boot loops at every turn.
    I wonder if maybe I've got some bad pins or a poor connection on my RAM slots. I removed the RAM and began testing one by one. First stick gave a boot loop. Second stick worked. On restart the BIOS LED wasn't flashing anymore, which is odd since I hadn't yet set the BIOS fix feature to enabled. I powered down again and put my RAM back in, set my BIOS settings as suggested, and then clocked the RAM to 1333MHz. Seemed stable last night through a number of restarts.
    As for the backup BIOS reporting v 17.3. Yeah, that is odd. The manual says it can't be flashed either. Maybe BIOS just reports what the primary version number is no matter which chip (primary or secondary) is actually active and being booted from?
    I'd like to think this is over, but I'm sure when I go home and power up I'll get another boot loop. I'd rather not be without a PC for a couple weeks, but I may just have to RMA so I don't have to deal with this anymore. It's quite frustrating to have fiddle around for 10+ minutes to get your PC up and running, plus with a RAID0 setup and SSD cache I'm just asking for a system failure with all these power on/off cycles.

Maybe you are looking for

  • Import Fixed Assets data

    Hi all, I got error msg when i import fixed asset data, the format data already follow the import template. This is the error msg: Time     AppID     ExtID     Sev     Scope     Message 2008-01-29 13:02:55.678      0     BA     ER     CBAMasterDataTr

  • File to IDOC:how do i relate inbound idoc with generated idoc in the R/3

    hi experts; can any body tell me how can i relate the IDOC number genrated in the PI with the generated IDoc number in the SAP R/3 system for file to IDOC scenario? in SAP PI for tcade idx5, idoc no is:12002 but in SAP R/3 in tcode WE05, idoc no is:8

  • PDF output not including links

    I've searched these forums and read posts that the problem with links not working in PDF output should have been fixed in version 6. I'm using RoboHelp HTML 8 (with all suggested patches), but when I create a PDF output it has no links in body text o

  • Digital Signature - Requirement to Enter User ID

    Whassup Ya'll- We'd like to leverage digital signature in our landscape. However, in order to be Part 11 compliant we will need to have our approvers enter both their user ID and corresponding password. However, as it stands when an approver is promp

  • Cannot use email link add-in with windows 8.1

    Emailing links directly from firefox using my email used to be easy but now using windows 8.1 (and currently firefox v 37.0.1) I keep getting sent to a page requesting that I add my email account (office 365). However when I do this it just says that