Geturl("from external source")
Hello,
I'm trying to figure out how I can get the url from an
external source? I want to make a file that holds the urls and when
the item is called it pulls the url from the file. Is this
possible?
Thanks,
Ryan
Ciao
I do not think is possible right now but this is a great
suggestion for FL
Alessandro
Similar Messages
-
How to merge key field from external source system with SAP R/3 master
Hi,
In SAP BW 7.0 system, our scenario is Master Data for 0GL_ACCOUNT is coming from SAP R/3 alongwith the Transactional data records for standard FI cubes. Then, one more set of transaction data is coming from external source system, a flat file, into another custom DSO(ZDSO_FI), which also has this GL Account field.
This flat file's GL account, GL_file, has to be basically mapped/merged with the standard 0GL_ACCOUNT field so that at the time of loading the transactional data for custom DSO, ZDSO_FI (with transformation mapping GL_file > 0GL_ACCOUNT), system automatically refers to the 0GL_ACCOUNT master data to load these incoming transactional values, from the external flat file system. How can this be done?
To illustrate the scenario, say I have 5 records in 0GL_ACCOUNT, loaded from SAP R/3 into SAP BW-
0GL_ACCOUNT Short Description Source System
100 D1 R/3
200 D2 R/3
300 D3 R/3
400 D4 R/3
500 D5 R/3
Now suppose if my flat file has following sample transactional data, to be uploaded in SAP BW ZDSO_FI-
GL_file Key Figure1
400 789
200 567
Then after uploading this transactional data in ZDSO_FI (with transformation mapping GL_file > 0GL_ACCOUNT), the 0GL_ACCOUNT data becomes as below-
0GL_ACCOUNT Short Description Source System
400
200
100 D1 R/3
200 D2 R/3
300 D3 R/3
400 D4 R/3
500 D5 R/3
So note that the system did not refer the incoming GL's from flat file, although the field is mapped to 0GL_ACCOUNT in transformation, to the already available master data. Rather created 2 new data rows for the GL accounts coming from external system. Because of this I am not able to perform the calculations common from standard FI cube and ZDSO_FI, with GL account as key field. I need to synchronise these data values based on GL Account to proceed with further calculation and am badly stuck.
Request if anyone can please throw some light on how to achieve this seemingly simple requirement?
Thanks in advance.
NirmitBetter post this thread is in the [Enterprise Data Warehousing|Data Warehousing; forum.
-
I can't paste text from external sources into Photoshop CC 2014.
Hello everyone,
Since a few days I'm not able to paste texts from external sources into Photoshop CC 2014.
I never have problems with Photoshop CC before.
I have the new iOS Yosemite installed in my macbook.
It's really frustrating, can someone help please?I have basically the same setup, except on a Mac Mini. I am unable to reproduce your problem. Double check that you are copying the original text in the first place, and then make sure you are pasting into a text layer as you cannot paste into a regular Photoshop layer -- nothing will happen. Create a text layer by clicking on a regular layer with the text tool, the T in the tool box. The new layer will show up in the layers panel identified by the first line of the text.
-
Purchase of variant configuration material from external source
Hi,
I am working with variant configuration scenario , Here some material procured from external source and per characteristics requirements , these characteristics have varied price , these price should be maintain at condition level .
The Material purchases from external source its price according to characteristic select.
Pl helps me how these scenario resolve.H Rajesh,
1.Create another New characteristic called ZPrice .Give the description and go directly to Addnl Data Tab.Here in the table name Enter "MMCOM" and in the Field Name Enter "VKOND" at CT04 & save .
2.Now Goto CT04 in change mode, for Zprice Go to values tab and select RED &.Goto Extras-> Object Dependencies->Editor and then select Procedure & define condition.
3. Goto Inforecord Choose Extras ->Variant conditions.
Enter a variant key. Choose the desired condition type and specify the period during which the discounts and surcharges are to apply.
Enter the amount and save.
For More help please Refer Below SAP link
[Variant Configuration |http://help.sap.com/saphelp_47x200/helpdata/en/92/58d455417011d189ec0000e81ddfac/frameset.htm]
Regards
Pradeep
Edited by: Pradeep Kumar on Mar 4, 2008 10:36 AM
Edited by: Pradeep Kumar on Mar 4, 2008 10:37 AM -
How to import user profiles from external sources(other than AD) into SharePoint
Hi,
I want to import user profiles from external sources other than AD.
BadriYou have to use BCS for importing the profiles,
Check the following link with explanations
http://msdn.microsoft.com/en-us/magazine/ee819133.aspx
Please Mark it as answer if this reply helps you in resolving the issue,It will help other users facing similar problem -
Recording from external source
I am brand new to Mac / switched from pc a week ago. not able to figure out some things yet and havent found answers in support. mostly on the basic stuff. like I was able to record audio from a lp turntable on a pc. it looks like there is no recording program built in to the iMac, or am I wrong? will I have to purchase some type of software to record from external record or tape source?
Sorry some heavy-handed moderation has been going on here. I accidently duplicated my post when I edited it to say 'Welcome to Apple Discussions'. Then I asked the mods to remove the first post above and they've gone and deleted my second post and yours; I am sorry about that.
You posed a question about Real Instruments in the absent post. A Real Instrument can be a microphone input or any device that connects to the Audio-In port (or a USB/Firewire Audio device).
Hope that helps.
mrtotes -
I have just upgraded to Firefox 3.6.12 and links clicked in an external source will not open in Firefox.
Firefox is set as my default program for web browsing. I have tried to open links from Outlook, Dreamweaver, Digsby, and other programs.I have the same issue, opening links from external programs like Word or Thunderbird does not work. This used to work before the update to 3.6.12
-
How to get data from external source
Hi experts,
I want to get data from a different source e.g. from oracle. How can i get the data in BW??
SamHi Samir
there are different interfaces are available according to the source system.
For Oracle source system you can use DB connect interface.
you can extract data from several data sources to BI
File Interface:: Using this interface, you can access files in ASCII format or CSV format
DB Connect :: You use DB Connect to open other database connections in addition to the default connection and use these connections to transfer data from tables or views into a BI system.
UD Connect :: UD Connect (Universal Data Connect) uses the Application Server J2EE connectivity to enable the reporting and analysis of both SAP and non-SAP data. Using UD Connect, you can access all relational and multidimensional data sources. UD Connect transfers the data as flat data.
BI Service API ::
Web Service for Staging ::You use the Web service to write the data from the source into the PSA. The transfer of data is controlled externally, without placing demand on BI.
You can use this interface in conjunction with real-time data acquisition.
Please assign points if this info helps.
Regards
Vivek.. -
Querying data from External Source from FORMS
I have a form that is built based on Oracle tables.
But I need to get data from external Data source from within Forms and use it fro validation.
I need to execute a Select statement via ODBC from within Forms procedures. This is going to a SQL Server DB to get some information.
Any thoughts?
ThanksHi
What version of forms do you use? If you use forms 6i, take a look at the EXEC_SQL package. You can access oracle databases and ODBC databases (using OCA) independently of the main database connection -- well, I never tried but that is what the documentation says.
I am not sure about version 9i... the package is there, but I could not find anything in the help about it (what is not a good sign...)
hth
Luis Cabral -
New 2012 iMacs display input from external source
Do the new 2012 imacs support input from external DisplayPort sources?
2012 iMacs can't be used as a monitor for Macs with Mini DisplayPort, but you can use a 27-inch iMac with Mini DisplayPort as a monitor for 2012 iMacs. See > http://support.apple.com/kb/PH4469
-
Processing attachment from external source in workflow
I'm certain that the following is possible to create within a workflow process, but probably requires some customization to make it work properly. I wanted to see if any other have tried to do the same thing.
We want to initiate our workflow based upon the arrival of an email (from an external source) into a specific SAP Business Workplace inbox. The email itself will contain an attachment of a spreadsheet or text file. Once the flow starts, it will route the external email request for approval through a number of different channels. When all necessary approvals have been provided, we will want to have the attachment used as input to be posted into the system, via a customized file upload process we have. As I said earlier, I'm certain that this can be done with some custom code. Just wondering if anyone else has processed data like this previously.
Feedback and previous experience in this area is very much appreciated.
Thanks,
David Zepeda
[working in a v 4.72 environment]Hi David,
You need to look into inbound message handling in SO28 to tell the system what you want to do with incoming mails. Refere to help.sap.com:
http://help.sap.com/saphelp_nw2004s/helpdata/en/6c/69c2e3418d11d1896e0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/6c/69c2f0418d11d1896e0000e8322d00/frameset.htm
In inbound recipient you can choose SAP Object and assign a BOR object that implements interface IFRECEIVE, here you put your code into method RECEIVE.
This is excecuted for each received email, so you can raise an event for each email.
Let us know, if you get it to work.
Kind regards
Mikkel -
Cache/copy Bitmaps loaded from external source?
I'm working on a chat application that retreives user profile icons from remote sources (e.g. Blogger, Yahoo, Gravatar, etc). Easy to get the images in a Loader and display them.
The problem is that a single thread could have hundreds of records, but probably only 10-20 active commenters. In a standard browser, each <img...> link after the first one is cached, so you only hit the source site once. Is there any way to cache/store/copy those images within Flash to avoid requesting the same image over and over?
I can do it in the Local sandbox by accessing the BitmapData of the loader content and cloning a new bitmap for subsequent instances of the same request URL, but of course once the application moves to the Internet the security system requires a Policy file allowing bitmap access. I doubt that I can get Yahoo to add one for me. I don't need to manipulate the bitmap at all, just copy it. Or reference it as content from multiple Sprites, or something along that line. Once I've downloaded the image once, I don't see why the security system would prevent me from displaying it unchanged as many times on the page as needed.
If this can't be done in AS3, perhaps it would be a good feature to add in the next release? Remote image caching is pretty well accepted in other platforms.I put trace on the image URLs, and they always showed HTTP Status = 200 - they were loading every time. In any case, I came up with an easy workaround. I out a php script on my hosting server that fetches the image, then use that as the URL for the loader object. Voila, no security violation because the php is in the same domain as the swf. Cut down load time by at least a factor of 5.
Only problem is, the loader always gets a 200 status on the php script, eve though I'm setting an Http header to send a 404 (the same URL from a browser gets the 404 response.) That generates an Unkown File Type error in my SWF so I have to trap that rather than the http status. It works, except I can't differentiate b/t a non-existant image and a server or connecion error. Or at least, I can't do it without a lot more code -
Read from external source file in weblogic
Hi,
I am using Weblogic Server 10.3 in my project.
In one of my modules , i have a requirement where I have to read the contents of a file from an external location.[ex: D:\Test\Sample.xml ].
How to i configure this path in weblogic , so that I can read the content in my java source file.
Please advice.
Regards,
Praveenonly part i replied on was the part of how to read a file
but i think in your case you could do the next
use the sync file adapter to read in the file during your process
based on this content you set a variable "myOutputDirectory"
then create a file adapter (write) which will store the file on file system
http://docs.oracle.com/cd/E23943_01/integration.1111/e10231/adptr_file.htm#CIACICFD
4.3.2.2.5 Specifying a Dynamic Outbound File Name
and use that (jca.file.Directory) property to store the file either on the archive location or the delete location -
Hello there :)
i,ve faced a problem as the following :
i,ve internal network ( domain network ) with standlone TMG i want TMG to Allow public users to access
1- web server with load balance on port 5555
2- mail server with HTTPS for OWA
3- DNS to make public users make query to solve Domain name
4- FTP with load balance on port 5555
please anyone can help me with configuring this n make external users access the following mentioned aboveHi,
You could get start from the following blogs.
Microsoft Forefront TMG – Webserver Load Balancing
http://www.isaserver.org/articles-tutorials/configuration-general/Microsoft-Forefront-TMG-Webserver-Load-Balancing.html
Enabling Forms-based Authentication for External and Internal OWA 2010 Users in Exchange 2010 published using Forefront TMG 2010
http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/enabling-forms-based-authentication-external-internal-owa-2010-users-exchange-2010-published-using-forefront-tmg-2010-part2.html
TMG Firewall Name Resolution
http://www.isaserver.org/articles-tutorials/installation-planning/TMG-Firewall-Name-Resolution-Part3.html
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
MS Office attachments won't open from external sources in Office 2013
I have a client who is having an issue with MS Office attachments (.docx, .xlsx, .pptx) not opening. The error message is "[Office program] experienced an error trying to open the file". This is Office Pro Plus 2013 (no SP) on Win 7
SP1 x64. There are users on same OS with Office 2007 SP3 that are able to open attachments without issue.
I've tracked the issue down to Protected View. I've also found the acceptable answer for just about everyone that's asked is to uncheck or remove the Group Policy for "Enable Protected View for files originating from the Internet" and/or
"Enable Protected View for Outlook attachments".
Unfortunatey, due to the environment that it's in, I am unable to make that change. Does anyone know of an actual fix or workaround separate to this?
Thanks,
KielHi Kiel,
Probably, you can find the location of those files, then add it to the
Trusted Locations of any Office applications:
FILE>Options>Trust Center>Trust Center Settings...>Trusted Locations>Add new location... button
(usually, the error message dialog contains the source location of those files.)
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Maybe you are looking for
-
Reporting discrepancies in Prime 2 wifi
I'm having a problem where running different types of reports I've found that the number of WAPs being reported on changes. Under a device > detailed hardware the report generated does not include several WAP that are associated to controllers, in th
-
Integration of EBS in OBIEE 11G
Hi Experts, Could any one tell me,How to integrate OBIEE 11G with E-Business Suite,Got some steps but still it is not clear. Gone through some forums,But it is not clear,So please do the needful. Many Thanks. Edited by: 990728 on Mar 18, 2013 5:26 PM
-
How to asmcmd cp non ASM files to ASM on a remote node
We have a 8TB database, RDBMS 11,1. on Solaris 10, non ASM. Need to copy the 1290 files to remote node of AIX ASM to prepare for a upgrading to 11.2.0.2. We tried to use asmcmd cp to copy the files directly from non ASM too ASM remotely, but did not
-
My purchased song did not completely download. Now what?
How do I re-downlaod previously purchased songs from iTunes. The last part of the song did not download on 2 of my 4 last purchases.
-
Problem at the time of Reversal of Doc posted through ASKBN
Hi, User have error fully posted some documents through ASKBN tcode with posting date of 2012. Year 2012 is already closed after audit. Now we have to reverse those documents. But I am not able to reverse either the FI document through FB08 or Asset