GetURL issue on browser "interactive" mode

Hello all.
I'm having a hard time to show a webpage back on the browser,
after getURL is triggered to get it.
The environment is the following: Nokia N95, S60 3rd
Edition's web browser, Flash Lite 2.0.
Opening the mobile browser, I have a XHTML page, with a link
to a SWF. Upon clicking on it, the browser opens the Flash
Lite SWF properly (in the browser context - as opposite to
standalone - or more correctly even: "
interactive mode")
I'm seeing my very simple Flash application and I have a link
in a getURL on a movieclip
(see the code attached below)
Now, I know page is being accessed by the mobile browser in
the background - once i click the on the clip. However I can't see
it because my Flash Lite app is still visible on the screen.
How can I get to see the web page for which i called with
getURL in Flash?
Trying to come up with a solution, quitting the player by
adding fscommand2("quit"); right after the getURL call, seems to
immediately prevail as it actually closes the player, but doesn't
open the page before.
Does this means that it is not possible to click an object in
flash lite and view a webpage, when the player has been loaded in
browser context, rather than standalone?

Thanks for your reply dietmar.
In my case I wish to have different links with different
URLs.
Say like 3: one for homepage, other for favorites and a last
one for user profile for example.
Whenever the user would push a distinct button, it should
open a distinct URL.
In your solution you will still need to close using
fscommand("Quit");
which represents another new click. The user should not need
to think that he must close Flash in order to actually view the
page that the browser has loaded in the background.
Someone, Adobe or Nokia should be responsible to handle this
faulty behavior. But my first guess would be that it is a Flash
Lite Bug.
Also I am not able to pass JavaScript commands via Flash Lite
2.0 getURL function, to the S60 3rd ed. browser. Note that this
browser can handle window parameters like "_blank". I was able to
simulate the behavior I wanted with XHTML and JavaScript.
Unfortunately not with Flash Lite 2 and XHTML.

Similar Messages

Chrome, Mountain Lion and Full Screen Interactive Mode

I'm running into an issue when entering Full Screen (Interactive) Mode-- long story short, the Message and "Allow" button are over-magnified and don't appear on the screen for me to click, thereby making it impossible to use other keystrokes (and see certain things in the interactive game window t'boot).
This issue does not exist in Snow Leapord on an older machine, though the same updated versions of Chrome (and assumedly Flash Player) are at work there.
Any suggestions on something I can tweak-- or even a work-around/hotkey for Allowing FSI Mode?
The actual game screen itself is fine, albeit slightly cut off around the edges.

Man, do you have Sophos antivirus? If that so, you need to uninstall it the right way:
For Sophos Anti-Virus for Mac OS X version 7.x , go to Macintosh HD|Library|Sophos Anti-Virus.
Select 'Remove Sophos Anti-Virus.pkg'.
Follow the instructions on the screen.
NOTE, if you are running Sophos Anti-Virus for Mac OS X version 4.x, the path in step 1 is Macintosh HD|Library|Application Support|Sophos Anti-Virus.
It seems that Sophos antivirus is crashing ML. They have an update but I'll wait some time becuase I've really had a painful time these days.

CRIO application works in interactive mode but broken VIs reported in error log when run built application on target

I have been getting more than my fair share of grey hairs the past few days because of this. Over the past few months this almost never happened. Lately, after a seemingly minor change to some serial communications code, hardly a single build works without throwing errors like this:
#OSVers: 6.3
#OSBuild: Jun 6 2014, 09:14:16
#AppName: /c/ni-rt/system/lvrt.out
#Version: 14.0
#AppKind: AppLib
#AppModDate:
InitExecSystem() call to GetCurrProcessNumProcessors() reports: 1 processors
InitExecSystem() call to GetNumProcessors() reports: 1 processors
InitExecSystem() will use: 1 processors
starting LabVIEW Execution System 306708506 Thread 0 , capacity: 1 at [3507679466.00933790, (19:24:26.009337710 2015:02:24)]
starting LabVIEW Execution System 306708507 Thread 0 , capacity: 1 at [3507679470.59560204, (19:24:30.595601929 2015:02:24)]
starting LabVIEW Execution System 2 Thread 0 , capacity: 24 at [3507679481.25993776, (19:24:41.259937648 2015:02:24)]
starting LabVIEW Execution System 2 Thread 1 , capacity: 24 at [3507679481.25993776, (19:24:41.259937648 2015:02:24)]
starting LabVIEW Execution System 2 Thread 2 , capacity: 24 at [3507679481.25993776, (19:24:41.259937648 2015:02:24)]
starting LabVIEW Execution System 2 Thread 3 , capacity: 24 at [3507679481.25993776, (19:24:41.259937648 2015:02:24)]
Thread consumption suspected: 3 Try starting 4 threads
starting LabVIEW Execution System 2 Thread 4 , capacity: 24 at [3507679515.59324312, (19:25:15.593243004 2015:02:24)]
starting LabVIEW Execution System 2 Thread 5 , capacity: 24 at [3507679515.59324312, (19:25:15.593243004 2015:02:24)]
starting LabVIEW Execution System 2 Thread 6 , capacity: 24 at [3507679515.59324312, (19:25:15.593243004 2015:02:24)]
starting LabVIEW Execution System 2 Thread 7 , capacity: 24 at [3507679515.59324312, (19:25:15.593243004 2015:02:24)]
Thread consumption suspected: 8 Try starting 1 threads
starting LabVIEW Execution System 2 Thread 8 , capacity: 24 at [3507679515.73854351, (19:25:15.738543576 2015:02:24)]
and
#Date: TUE, FEB 24, 2015 04:47:22 PM
#OSName: VxWorks
#OSVers: 6.3
#OSBuild: Jun 6 2014, 09:14:16
#AppName: /c/ni-rt/system/lvrt.out
#Version: 14.0
#AppKind: AppLib
#AppModDate:
InitExecSystem() call to GetCurrProcessNumProcessors() reports: 1 processors
InitExecSystem() call to GetNumProcessors() reports: 1 processors
InitExecSystem() will use: 1 processors
starting LabVIEW Execution System 306708506 Thread 0 , capacity: 1 at [3507670087.84041262, (16:48:07.840412710 2015:02:24)]
starting LabVIEW Execution System 306708507 Thread 0 , capacity: 1 at [3507670092.45153570, (16:48:12.451535843 2015:02:24)]
starting LabVIEW Execution System 2 Thread 0 , capacity: 24 at [3507670103.11840487, (16:48:23.118404925 2015:02:24)]
starting LabVIEW Execution System 2 Thread 1 , capacity: 24 at [3507670103.11840487, (16:48:23.118404925 2015:02:24)]
starting LabVIEW Execution System 2 Thread 2 , capacity: 24 at [3507670103.11840487, (16:48:23.118404925 2015:02:24)]
starting LabVIEW Execution System 2 Thread 3 , capacity: 24 at [3507670103.11840487, (16:48:23.118404925 2015:02:24)]
VI_BROKEN (0): [VI "NC serial comms protocol.lvlibet Lower Temperature Limit.vi" (0x04667310)]
VirtualInstrument:etOrClearBadVILibrary - now VI is bad on [VI "NC serial comms protocol.lvlibet Lower Temperature Limit.vi" (0x04667310)]
this->flags=33563136, compilerError=6
VI_BROKEN (0): [VI "Heater Control HAL.lvclass:Write Heater Control Active.vi" (0x058c4e98)]
VirtualInstrument:etOrClearBadVILibrary - now VI is bad on [VI "Heater Control HAL.lvclass:Write Heater Control Active.vi" (0x058c4e98)]
this->flags=50340352, compilerError=6
VI_BROKEN (0): [VI "NI_LVConfig.lvlibave Config File.vi" (0x047b7e90)]
VirtualInstrument:etOrClearBadVILibrary - now VI is bad on [VI "NI_LVConfig.lvlibave Config File.vi" (0x047b7e90)]
this->flags=33563136, compilerError=6
and so on.
This is using a cRIO 9074 running CompactRIO recommended software set 14.0.1 .
These errors happen right at startup. Memory use is steady in interactive mode, about 20 MB contiguous memory is unallocated out of 128 MB. I have taken pains to prevent allocation and follow cRIO besta practices non concatenated strings array building in loops etc). CPU is 50-60% when running interactive mode.
Really at my whit's end here, I have tried the various combination of enabling / disabling debugging in the RTEXE, disconnecting typedefs etc. I have not noticed a pattern.
Regards,
MarkCG

Hello MarkCG,
What minor changes did you make to the serial communication code? Posting the VI or a screenshot of the VI with the modifications which caused the RTEXE to stop functioning could be useful to troubleshoot the issue.
Regards,
J_Bou

Performance issue in browsing SSAS cube using Excel for first time after cube refresh

Hello Group Members,
This is a continuation of my earlier blog question -
https://social.msdn.microsoft.com/Forums/en-US/a1e424a2-f102-4165-a597-f464cf03ebb5/cache-and-performance-issue-in-browsing-ssas-cube-using-excel-for-first-time?forum=sqlanalysisservices
As that thread is marked as answer, but my issue is not resolved, I am creating a new thread.
I am facing a cache and performance issue for the first time when I try to open a SSAS cube connection using Excel (using Data tab -> From Other Sources --> From Analysis Services) after daily cube refresh. In end users system (8 GB RAM but around
4GB available RAM), for the first time, it takes 10 minutes to open the cube. From next run onwards, its open up quickly within 10 secs.
We have daily ETL process running in high end servers. The configuration of dedicated SSAS cube server is 8 core, 64GB RAM. In total we have 4 cube DB - out of which for 3 is full cube refresh and 1 is incremental refresh. We have seen after daily cube
refresh, it takes 10 odd minutes to open the cube in end users system. From next time onwards, it opens up really fast with 10 secs. After cube refresh, in server systems (32 GB RAM, around 4GB available RAM), it takes 2 odd minutes to open the cube.
Is there, any way we could reduce the time taken for first attempt ?
As mentioned in my previous thread, we have already implemented a cube wraming cache. But, there is no improvement.
Currently, the cumulative size of the all 4 cube DB are more than 9 GB in Production and each cube DB having 4 individual cubes in average with highest cube DB size is 3.5 GB. Now, the question is how excel works with SSAS cube after
daily cube refresh?
Is it Excel creates a cache of the schema and data after each time cube is refreshed and in doing so it need to download the cube schema in Excel's memory? Now to download the the schema and data of each cube database from server to client, it will take
a significant time based on the bandwidth of the network and connection.
Is it anyway dependent to client system RAM ? Today the bigest cube DB size is 3.5 GB, tomorrow it will be 5-6 GB. Now, though client system RAM is 8 GB, the available or free RAM would be around 4 GB. So, what will happen then ?
Best Regards, Arka Mitra.

Could you run the following two DMV queries filling in the name of the cube you're connecting to. Then please post back the row count returned from each of them (by copying them into Excel and counting the rows).
I want to see if this is an issue I've run across before with thousands of dimension attributes and MDSCHEMA_CUBES performance.
select [HIERARCHY_UNIQUE_NAME]
from $system.mdschema_hierarchies
where CUBE_NAME = 'YourCubeName'
select [LEVEL_UNIQUE_NAME]
from $system.mdschema_levels
where CUBE_NAME = 'YourCubeName'
Also, what version of Analysis Services is it? If you connect Object Explorer in Management Studio to SSAS, what's the exact version number it says on the top server node?
http://artisconsulting.com/Blogs/GregGalloway

Running Forecast in the backgrd chooses Forecast from the INTERACTIVE mode

Folks
When I tried to run forecast through background job, instead of running the forecast based on the Master Profle & Univariate profile I had defined in the Activity, forecast is being run based on the Master Profle & Univariate profiles specified in the Interactive mode?
I had even tried by checking the "Always use job profile' checkbox in the background activity but this didnt work ?
Are there any other extra settings I need to make to overcome this problem ? Any ideas or suggestions ?
TIA
Edited by: Krishna Tummala on Jun 16, 2008 12:36 AM

Hi Srinivas
I do have one question based on your response. This scenario might not arise in the real scenario.
As each selection profile can be assigned with a different forecast profile in the Interactive planning/forecasting mode, what Forecast profile would the system use in mass processing, as the Activity assigned to background job can have only one Master and Forecast profile and the selected ID's in this example has more than one Master and Forecast profile.
Thanks

Solaris 10 U6 jumpstart installation always goes into interactive mode desp

While doing the Solaris 10 U6 jumpstart installation, it is going into interactive mode for netmask.
This is the sysidcfg file configuration being used :
bash-3.00# cat /export/home/iserver/jumpstart/donau1/sysidcfg
system_locale=en_US
name_service=none
network_interface=ce2
{hostname=donau1 netmask=255.255.252.0 ip_address=10.50.57.24 protocol_ipv6=no default_route=10.50.56.1}
security_policy=none
terminal=vt100
timezone="MET"
timeserver=10.50.57.214
nfs4_domain=dynamic
root_password=5YcgZqC0krYjo
bash-3.00#
Here the network interface specified is "ce2" and the netmask is as shown above. Still, we observe the problem all the times.
and I have seen the following messages on the screen
Attempting to configure interface ce3...
Skipped interface ce3
Attempting to configure interface ce2...
Configured interface ce2
ip_arp_done: init failed
ifconfig: setifflags: SIOCSLIFFLAGS: ce2: Cannot assign requested address
Attempting to configure interface ce1...
Skipped interface ce1
Attempting to configure interface ce0...
Skipped interface ce0
Reading ZFS config: done.
Setting up Java. Please wait...
Serial console, reverting to text install
Beginning system identification...
Searching for configuration file(s)...
Using sysid configuration file 10.50.57.214:/export/home/iserver/jumpstart/donau1/sysidcfg
Search complete.
Discovering additional network configuration...
Completing system identification...
after this it is going into interactive mode and prompting for netmask . After providing the netmask, installation goes through successfully.
so please suggest me some solution to avoid it going into interactive mode.

I have seen this too over the years and it ultimately comes down to something innate:
Here are a few suggestions:
1. Try and use interface ce0.
2. Check default route on both jumpstart server and client.
3. The arp cache may need to be flushed on the Jumpstart server.
4. Use snoop and see what happens during the actual RARPing phase between the server and host.
5. Switch the order in the sysid config file as indicated below:
system_locale=en_US
name_service=none
network_interface=ce2
{hostname=donau1 ip_address=10.50.57.24 netmask=255.255.252.0 protocol_ipv6=no default_route=10.50.56.1}
security_policy=none
terminal=vt100
timezone="MET"
timeserver=10.50.57.214
nfs4_domain=dynamic
root_password=*****************
Please note I blanked your root password. Let me know if this helps.

How to run a test in interactive mode?

If I want to run a test in interactive mode, how do I set it up?
For vcsi, there is a compile time option "-debug" and then in run
time, you could execute "./simv -gui". Do you have such flows available?

Hi
You can define 2 radio button one foreground and otherfor background then
for background use FM BP_JOB_CREATE or BKK_UPT_DISP_JOBS_START or DB2_SCHEDULE_JOB_IMMED
Regards
Shiva

Browser document Mode in Custom Framework works partially.

Hallo.
In our custom Framework, I have the iview "Browser Document Mode"
Property "Browser Document Mode"="IE=EmulateIE7"
When I browse in the portal, it works and if I search the document mode, using,the Internet Explorer developer tool, I see:
"Non-standard IE 5 Document type" and it works right.
When I open a km news to create a new one, it opens a separate page, and it doesn't work well.
I see : "Non-standard Document type" and it dosen't work well when I browse in km folder.
If I force "Non-standard IE 5 Document type"
How can I solve it ?
Could you jelp me?
Thanks a lot.
Mario

Hallo.
iview manage news, has: Launch in new window:"Display in Portal Content Area"
The problem happens only when i click "New News" that seems it loses the setting Property "Browser Document Mode"="IE=EmulateIE7"
Perhaps, if there is a property to specify "Browser Document Mode"="IE=EmulateIE2" in the Layout Set "NewsBrowser" could it be the solution?
How could I do this?
Thanks

Starting WLST in Interactive mode

I am having a lot of trouble starting WLST in Interactive mode. I am running setWLEnv.sh and then using the command java weblogic.WLST and I get the following error.
root@esrsqa1 bin# ./setWLSEnv.sh
CLASSPATH=/opt/bea/patch_wlw1001/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/bea/patch_wls1001/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/bea/jrockit_150_11/lib/tools.jar:/opt/bea/wlserver_10.0/server/lib/weblogic_sp.jar:/opt/bea/wlserver_10.0/server/lib/weblogic.jar:/opt/bea/modules/features/weblogic.server.modules_10.0.1.0.jar:/opt/bea/modules/features/com.bea.cie.common-plugin.launch_2.1.2.0.jar:/opt/bea/wlserver_10.0/server/lib/webservices.jar:/opt/bea/modules/org.apache.ant_1.6.5/lib/ant-all.jar:/opt/bea/modules/net.sf.antcontrib_1.0b2.0/lib/ant-contrib.jar:
PATH=/opt/bea/wlserver_10.0/server/bin:/opt/bea/modules/org.apache.ant_1.6.5/bin:/opt/bea/jrockit_150_11/jre/bin:/opt/bea/jrockit_150_11/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/opt/oracle_client/product/11.1.0/client_1/bin:/root/bin
Your environment has been set.
root@esrsqa1 bin#
root@esrsqa1 bin#
root@esrsqa1 bin#
root@esrsqa1 bin# java Weblogic.WLST
Exception in thread "main" java.lang.NoClassDefFoundError: Weblogic.WLST
at gnu.java.lang.MainThread.run(libgcj.so.7rh)
Caused by: java.lang.ClassNotFoundException: Weblogic.WLST not found in gnu.gcj.
runtime.SystemClassLoader{urls=[file:./], parent=gnu.gcj.runtime.ExtensionClassLoader{urls=[], parent=null}}
at java.net.URLClassLoader.findClass(libgcj.so.7rh)
at java.lang.ClassLoader.loadClass(libgcj.so.7rh)
at java.lang.ClassLoader.loadClass(libgcj.so.7rh)
at gnu.java.lang.MainThread.run(libgcj.so.7rh)
I can use WLST just fine if I pass it a python script but it will not work interactively. I am using WLST in my startup and shutdown scripts and they work flawlessly. Does anybody have any ideas?
Thanks,
Scott
Edited by: carters2 on Apr 2, 2009 6:46 AM
Edited by: carters2 on Apr 2, 2009 6:49 AM

Team,
As per the instructions, I have changed the port from 7001 to 10003
java weblogic.WLST
wls:/offline> connect()
Please enter your username [weblogic] : weblogic
Please enter your password [weblogic] : weblogic
Please enter your server URL [t3://localhost:7001] : t3://localhost:7001
Connecting to t3://localhost:7001 with userid weblogic ...
edit()
startEdit()
cd ('Servers/AdminServer')
cmo.setListenPort(9999)
save()
activate()
When I tried to start the server, I am receiving the following error
May 4, 2010 4:15:41 PM EDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 10.0-b19 from Sun
Microsystems Inc.>
<May 4, 2010 4:15:42 PM EDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for 380194 Fri Oct 24 13:20:13 IST 2008
WebLogic Server Temporary Patch for 8408837 Fri Apr 03 17:01:18 EDT 2009
WebLogic Server Temporary Patch for CR378781, CR380313 Fri Sep 19 13:34:16 PDT 2008
WebLogic Server Temporary Patch for CR381056 Mon Oct 06 10:48:50 EDT 2008
WebLogic Server Temporary Patch for CR374413, CR378680 Tue Sep 02 09:55:36 PDT 2008
WebLogic Server Temporary Patch for CR378102 Wed Sep 10 23:28:48 PDT 2008
WebLogic Server Temporary Patch for CR378741 Tue Sep 09 13:08:51 PDT 2008
WebLogic Server 10.3 Fri Jul 25 16:30:05 EDT 2008 1137967 >
<May 4, 2010 4:15:43 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<May 4, 2010 4:15:43 PM EDT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<May 4, 2010 4:15:44 PM EDT> <Notice> <Log Management> <BEA-170019> <The server log file C:\bea\user_projects\domains\osb_domain\servers\AdminServer\l
ogs\AdminServer.log is opened. All server side log events will be written to this file.>
<May 4, 2010 4:15:44 PM EDT> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
java.net.UnknownHostException: aaa.bbb.org:10003
at java.net.Inet4AddressImpl.lookupAllHostAddr(Native Method)
at java.net.InetAddress$1.lookupAllHostAddr(InetAddress.java:849)
at java.net.InetAddress.getAddressFromNameService(InetAddress.java:1200)
at java.net.InetAddress.getAllByName0(InetAddress.java:1153)
at java.net.InetAddress.getAllByName(InetAddress.java:1083)
at java.net.InetAddress.getAllByName(InetAddress.java:1019)
at java.net.InetAddress.getByName(InetAddress.java:969)
at weblogic.rjvm.JVMID.setLocalID(JVMID.java:201)
at weblogic.rjvm.RJVMService.setJVMID(RJVMService.java:48)
at weblogic.rjvm.RJVMService.start(RJVMService.java:30)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
How do I start the server now?

Imports not displayed in browser view mode

Why are my photo imports displayed as black images in browser view mode?

Not sure on your version but right click the member and select "View member properties", it should display a property window and attributes will be in there.
There is also the atrribute viewer
Cheers
John
http://john-goodwin.blogspot.com/

Cannot feed configuration files to lookupd started in interactive mode

The manual page of lookupd states that lookupd may be run in an interactive mode if started with the -d option.
It also says:
[BEGIN TERMINAL TRANSCRIPT]
This second copy of lookupd runs independently of the system's ``main''
lookupd and does not provide information to other programs running on
your system. This allows you to try queries and test configuration
options without disturbing normal operations. The second copy of lookupd
will attempt to read its configuration options from a NetInfo directory
named /locations/lookupd_debug (NetInfo) or /etc/lookupd_debug (files).
If they don't exist, it will try /locations/lookupd or /etc/lookupd.
[END TERMINAL TRANSCRIPT]
I created the 'global' configuration file in /etc/lookupd_debug/ but it seems that lookupd doesn't read it:
[BEGIN TERMINAL TRANSCRIPT]
xfox% pwd
/private/etc/lookupd_debug
xfox% ls -l
total 8
-rw-r--r-- 1 root wheel 265 Oct 25 15:54 global
xfox% cat global
LogFile /Users/xfox/lookupd_debug.log
LogPriority 7
xfox%sudo lookupd -d
Password:
lookupd version 369.5 (root 2006.02.10 04:16:23 UTC)
Enter command name, "help", or "quit" to exit
configuration
Array: "Configuration"
==> 8 objects
Dictionary: "Global Configuration"
ConfigSource: default
LookupOrder: Cache NI DS
MaxIdleServers: 4
MaxIdleThreads: 2
MaxThreads: 64
TimeToLive: 43200
Timeout: 30
ValidateCache: YES
ValidationLatency: 15
configname: Global Configuration
Dictionary: "Host Configuration"
LookupOrder: Cache FF DNS NI DS
configname: Host Configuration
Dictionary: "Service Configuration"
LookupOrder: Cache FF NI DS
configname: Service Configuration
Dictionary: "Protocol Configuration"
LookupOrder: Cache FF NI DS
configname: Protocol Configuration
Dictionary: "Rpc Configuration"
LookupOrder: Cache FF NI DS
configname: Rpc Configuration
Dictionary: "Group Configuration"
TimeToLive: 60
ValidateCache: NO
configname: Group Configuration
Dictionary: "Initgroup Configuration"
TimeToLive: 300
ValidateCache: NO
configname: Initgroup Configuration
Dictionary: "Network Configuration"
LookupOrder: Cache FF DNS NI DS
configname: Network Configuration
<== 8 objects
<div class="jive-quote">quit
xfox%
[END TERMINAL TRANSCRIPT]
Look for the line "ConfigSource: default".
I think it should be something else when lookupd read its configuration from a file. Indeed, no log file is created into my home directory.
What am I missing?

I filed a bug report.

SFTP and keyboard-interactive mode

Our SFTP servers recently switched to requiring keyboard-interactive mode when making connections. This seems to have broken those that use Contribute. In my testing, both Contribute CS4 and CS5 do not support this option - unless there is a setting I can't find. Has anyone contacted Adobe and received a confirmation that it is or is not supported? Is there a setting or registry setting that can be set to enable support for keyboard-interactive mode in Contribute?
For those unfamiliar with keyboard-interactive (as I was), here is a snippet from wikipedia:
keyboard-interactive (RFC 4256): a versatile method where the server sends one or more prompts to enter information and the client displays them and sends back responses keyed-in by the user. Used to provide one-time password authentication such as S/Key or SecurID. Used by some OpenSSH configurations when PAM is the underlying host authentication provider to effectively provide password authentication, sometimes leading to inability to log in with a client that supports just the plain password authentication method.
The RFC is dated Janary of 2006 so this is not something super new.
Thanks,
shogun_220

kintopp wrote:
> As far as I can tell, keyboard-interactive style
authentication is still
> missing in v4. Can someone from Adobe please confirm. If
true, this is a real
> disappointment, and prevents the use of Contribute with
the main campus
> webservers at my university.
>
What web server are you using? Are you sure it works fine
with other ftp
clients?

Adpreclone.pl Non-interactive Mode

Hi All,
want to automate backup of APPL tier
To do that it is required to run adpreclone.pl with non-interactive mode i.e. It will not ask for any password when it will run through shell script.
Or something like perl adpreclone.pl appsTier pwd=<>
Is there is any other way to do that?
Please advice.
Thanks-
P

966726 wrote:
Hi All,
want to automate backup of APPL tier
To do that it is required to run adpreclone.pl with non-interactive mode i.e. It will not ask for any password when it will run through shell script.
Or something like perl adpreclone.pl appsTier pwd=<>
Is there is any other way to do that?
Please advice.
Thanks-
PPlease see old threads -- https://forums.oracle.com/forums/search.jspa?threadID=&q=Automate+AND+Clone&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Want to view Webi report in interactive mode in EP

Hi,
I am currently doing BO Integration with SAP 7.0. I have done the Integration successfully & have imported roles. Our requirement is that the reports needs to be viewed in EP. I have done the EP portal integration as per the installation document. I can view my CR & webi reports from portal. But my client wants to view the webi reports in Interactive mode as he views in BO Infoview 3.1. I can't find any work around for this.. can anyone help me in viewing the webi report in interactive mode inside EP.
Right now am viewing the report in html format, which is the default, (report viewer.do). Is there any functionality or other viewer name to make my requirement possible
I have installed SAP BO 3.1 & BO Integration Kit 3.
Any help will be greatly appreciated..
Thank you,
Ash

Hi,
you can integrate the viewing of Web Intelligence using OpenDocument or using the KM Integration. The type of the viewer then depends on the user preferences configured in InfoView.
ingo

ALOM host's net boot launches install in interactive mode

When I provision a SPARC ALOM host w/ a default Solaris profile variable set, everything works. When I create a variable set and modify the sysidcfg_root_password_base_config, set the setup_user_acct_spsra=y, and modify the user_passwd_spsra, and run provision_start plan, the host net boots, but goes into interactive mode, prompting for language. <p> Any ideas why this is happening?
<p>
Pete
Message was edited by:
peteziu

I'd compare the jet templates that get created and look for eventual problems regd. jet on sunsolve
I think you might fill in some more stuff to your variable set besides those 3 infos

GetURL issue on browser "interactive" mode

Similar Messages

Maybe you are looking for