GETVPN: Cisco 3925E as a Key Server for 1500 GMs
Hi,
In a MPLS-VPN scenario as a private network for a client, they want to encrypt all their data traffic. GETVPN is the chosen encryption solution. They have 1500 branch offices, and 2 CPDs. We plan to use two Cisco 3925E as Key Servers, one in each CPD.
Is the Cisco 3925E enough to support 1500 Branch Offices? If not, what plattaform do you recommend?
Cisco Deployment and design guide is from 2010 and new platform Cisco 3900 is not mentioned.
Thanks in advance
Hi Jorge,
The maximum number of GMs tested on a 3925E is 4000. you'll find the details of the scalability tests here:
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6525/ps9370/ps7180/GETVPN_DIG_version_1_0_External.pdf
Hope that helps,
Atri.
Similar Messages
-
Hi,
I am using Cisco 7200 NPG1 as Key server for GETVPN. I have almost 500 Spokes. How many concurrent IKE sessions could be supported by 7200 box ?
I have heard that simultenous session limit for IKE is 100 ?
regards
Prasad KI have heard that simultenous session limit for IKE is 100 ?
This is true to software crypto.
You get best scaling factor on 7200 with VSA. 500 seems a decent number. Are you seeing any problems? -
Different hardware for GETVPN Key server
Hi,
Can I use different platforms for Key server and COOP key server ? I belive it is just IPSec or GDOI relation between the two and platform is not related. Can I have some guidelines or link from Cisco on this ? Please help
regards
PrasadHardware and software requirements:
http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6635/ps7180/product_data_sheet0900aecd80582067.html
For more information you can visit the below listed link
http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6635/ps7180/deployment_guide_c07_554713.html
Regards,
Jatin -
When i try to install iPlanet App Server on NT, I do not get screen to enter license key valid for evaluation.
Also during installation screens an error window is displayed saying "cache File Read error -- Could not read ProductKey entry from the cache file "Hi,
I also get the following message:
"Could not read ProductKey entry from the cache file"
I have no idea how to provide the installation software with the key. I also tried "keycheck.exe"
Do you have a solution for this problem? Did you finish the installation?
Christian -
Can anyone help figure out why the Catalyst 6509 is not able to assign an IPv6 address? Thank you.
Cisco Catalyst 6500 version 12.2(33)SXI13 configured as DHCP server for a VLAN responds to Windows 7 client with status code NOADDRS-AVAIL(2). My configuration on the 6500 for the DHCPv6 server is:
ipv6 dhcp database disk0://DHCPV6-DB
ipv6 dhcp pool VLAN206IPV6
prefix-delegation pool VLAN206IPV6-POOL
dns-server 2620:B700:0:1001::53
domain-name global.bio.com
ipv6 local pool VLAN206IPV6-POOL 2620:B700:0:12C7::/65 65
interface Vlan206
description *** IPv6 Subnet ***
ip address 10.2.104.2 255.255.255.0
ipv6 address 2620:B700:0:12C7::2/64
ipv6 nd prefix 2620:B700:0:12C7::/64 14400 14400 no-autoconfig
ipv6 nd managed-config-flag
ipv6 dhcp server VLAN206IPV6
standby version 2
standby 0 ip 10.2.104.1
standby 0 preempt
standby 6 ipv6 2620:B700:0:12C7::1/64
standby 6 preempt
I'm getting a result from my debug as follows:
Apr 10 16:28:02.873 PDT: %LINK-3-UPDOWN: Interface GigabitEthernet2/2, changed state to up
Apr 10 16:28:02.873 PDT: %LINK-SP-3-UPDOWN: Interface GigabitEthernet2/2, changed state to up
Apr 10 16:28:02.877 PDT: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/2, changed state to up
Apr 10 16:28:03.861 PDT: IPv6 DHCP: Received SOLICIT from FE80::5D5E:7EBD:CDBF:2519 on Vlan206
Apr 10 16:28:03.861 PDT: IPv6 DHCP: detailed packet contents
Apr 10 16:28:03.861 PDT: src FE80::5D5E:7EBD:CDBF:2519 (Vlan206)
Apr 10 16:28:03.861 PDT: dst FF02::1:2
Apr 10 16:28:03.861 PDT: type SOLICIT(1), xid 8277025
Apr 10 16:28:03.861 PDT: option ELAPSED-TIME(8), len 2
Apr 10 16:28:03.861 PDT: elapsed-time 101
Apr 10 16:28:03.861 PDT: option CLIENTID(1), len 14
Apr 10 16:28:03.861 PDT: 00010001195FD895F01FAF10689E
Apr 10 16:28:03.861 PDT: option IA-NA(3), len 12
Apr 10 16:28:03.861 PDT: IAID 0x0FF01FAF, T1 0, T2 0
Apr 10 16:28:03.861 PDT: option UNKNOWN(39), len 32
Apr 10 16:28:03.861 PDT: option VENDOR-CLASS(16), len 14
Apr 10 16:28:03.861 PDT: option ORO(6), len 8
Apr 10 16:28:03.861 PDT: DOMAIN-LIST,DNS-SERVERS,VENDOR-OPTS,UNKNOWN
Apr 10 16:28:03.861 PDT: IPv6 DHCP: Option IA-NA(3) is not supported yet
Apr 10 16:28:03.861 PDT: IPv6 DHCP: Sending ADVERTISE to FE80::5D5E:7EBD:CDBF:2519 on Vlan206
Apr 10 16:28:03.861 PDT: IPv6 DHCP: detailed packet contents
Apr 10 16:28:03.861 PDT: src FE80::21D:E6FF:FEE4:4400
Apr 10 16:28:03.861 PDT: dst FE80::5D5E:7EBD:CDBF:2519 (Vlan206)
Apr 10 16:28:03.861 PDT: type ADVERTISE(2), xid 8277025
Apr 10 16:28:03.861 PDT: option SERVERID(2), len 10
Apr 10 16:28:03.865 PDT: 00030001001DE6E44400
Apr 10 16:28:03.865 PDT: option CLIENTID(1), len 14
Apr 10 16:28:03.865 PDT: 00010001195FD895F01FAF10689E
Apr 10 16:28:03.865 PDT: option STATUS-CODE(13), len 15
Apr 10 16:28:03.865 PDT: status code NOADDRS-AVAIL(2)
Apr 10 16:28:03.865 PDT: status message: NOADDRS-AVAILHello,
maybe hitting the following bug.
Pv6 Address Assignment Support for IPv6 DHCP Server
CSCse81385
Hope this helps -
Cisco Secure Access Control Server for Windows 3.0
I have to rebuild a server using Cisco Secure Access Control Server for Windows 3.0 ... I cannot locate this software under "download software" in cisco.com ..
where can I download a copy for Cisco Secure Access Control Server for Windows 3.0 ?Hi,
You can not download the ACS windows Solution engines softwares from the cisco.com > download pages as these s/w are not available there. You can only download patches and remote agent software.
In order to get any ACS software/ upgrade assistance you need to open up a TAC case.
Also, ACS 3.0 is not supported by Cisco anymore..getting support for this version or any 3.x is not possible.
HTH
Regards,
JK -
Hardware Needed for Cisco 2911 as a console server
Hi,
We need to setup Cisco 2911 router as a console server for OOB (Out of band) connectivity to console of each DC device (upto 20 devices) Could someone please respond to the following questions we had:
1. What interface module can we install on the 2911 ISR for this purpose?
2. What cable (part number please) will go to the that 2911-ISR interface slot and then we can connect the consoel ports of out network devices to that cable.
It needs to be something similar to the cisco octal cable which I know we used for Cisco 2500 series for console purposes to other devices. But not sure about Cisco 2911.
I would highly appreciate your information and help.
Thanks
LovleenYou would need an interface providing asynchronous serial ports. Something like the HWIC-8A or the HWIC-16A. Needing 20 ports you will most likely use one of each type (having then 24 ports).
The cable to connect to the HWIC is the CAB-HD8-ASYNC. If you attach routers and switches console ports directly to the RJ45 plugs everything is fine. If you have other types of serial ports to serve (DB-9 or DB-25) then you need the according adapters. I don't know if they have product numbers...
Or to have it all on one single PDF follow this link
BR
Björn -
Configuring Cisco TFTP Server for CUCM
Hi,
I currently have a Publisher and two Subscriber (v 6.1.3), I have now gone over the magical 1250 devices where Cisco recommend a standalone TFTP server.
I understand to deploy it I need to add it to the Publisher as a Server and then once up and running enable the Cisco TFTP service, then update the Option 150 address in my DHCP scope to point towards the new TFTP server.
A couple of questions, does the TFTP server need the following installed at the same level as the Publisher/Subscribers:
Dial Plans
Device Packs
Locales
Thanks and any other comments appreciated.Hi Ian,
- By architecture, the TFTP server would be the one pushing out the firmware load and to the phones - so you would need your device packs, containing the bundle of firmware loads, to be on your standalone TFTP server.
- locales install files which the phones get from the TFTP server, such as their dictionary - so you would need locales on the standalone TFTP server
- Dial plans are files used by the CCM binary file. If you are not planning on running CCM service on the server ever, you don't need to install dial plans on that server. However, as best practice, it is good to have dial plans, locales and device packs uploaded on this standalone TFTP server, in case the server roles were adjusted at a later point in time.
- Sriram
Please rate helpful posts ! -
LMS 4.0.1 Cisco 3925E Inventory Polling Fails
I have an LMS 4.0.1 server (on Windows 2008 R2) with all the LMS and device updates applied that fails when trying to do an Inventory Collection on a Cisco 3925E router. The router is running IOS Version 15.1(1)T2. This device is apparently supported according to:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.0/device_support/table/lms40sdt.html
Some 'show ver' info:
Cisco IOS Software, C3900e Software (C3900e-UNIVERSALK9-M), Version 15.1(1)T2, RELEASE SOFTWARE (fc1)
ROM: System Bootstrap, Version 15.1(1r)T2, RELEASE SOFTWARE (fc1)
System image file is "flash0:c3900e-universalk9-mz.SPA.151-1.T2.bin"
Cisco CISCO3925-CHASSIS (revision 1.0) with C3900-SPE200/K9 with 689152K/293888K bytes of memory.
'show inv':
NAME: "CISCO3925-CHASSIS", DESCR: "CISCO3925-CHASSIS"
PID: CISCO3925-CHASSIS , VID: V02, SN: FGL152610R8
NAME: "Cisco Services Performance Engine 200 for Cisco 3900 ISR on Slot 0", DESCR: "Cisco Services Performance Engine 200 for Cisco 3900 ISR"
PID: C3900-SPE200/K9 , VID: V02 , SN: FOC151828UX
NAME: "WAN Interface Card - HWIC Serial 1T on Slot 0 SubSlot 0", DESCR: "WAN Interface Card - HWIC Serial 1T"
PID: HWIC-1T , VID: V04 , SN: FOC15170VRL
NAME: "C3900 AC-POE Power Supply 1", DESCR: "C3900 AC-POE Power Supply 1"
PID: PWR-3900-POE , VID: V02, SN: SNI1503C7AV
NAME: "C3900 AC Power Supply 2", DESCR: "C3900 AC Power Supply 2"
PID: PWR-3900-AC , VID: V03, SN: SNI1521C825
For reference, here is the SNMP configuration on the 3925:
snmp-server group ADMIN v3 auth
snmp-server community <rostring> RO
snmp-server ifindex persist
snmp-server ip precedence 2
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
snmp-server enable traps tty
snmp-server enable traps ospf state-change
snmp-server enable traps ospf errors
snmp-server enable traps ospf retransmit
snmp-server enable traps ospf lsa
snmp-server enable traps ospf cisco-specific state-change nssa-trans-change
snmp-server enable traps ospf cisco-specific state-change shamlink interface-old
snmp-server enable traps ospf cisco-specific state-change shamlink neighbor
snmp-server enable traps ospf cisco-specific errors
snmp-server enable traps ospf cisco-specific retransmit
snmp-server enable traps ospf cisco-specific lsa
snmp-server enable traps flash insertion removal
snmp-server enable traps envmon fan shutdown supply temperature status
snmp-server enable traps bgp
snmp-server enable traps memory bufferpeak
snmp-server enable traps config-copy
snmp-server enable traps config
snmp-server enable traps entity
snmp-server enable traps event-manager
snmp-server enable traps cpu threshold
snmp-server enable traps syslog
snmp-server enable traps vtp
snmp-server enable traps ipsla
snmp-server enable traps bulkstat collection transfer
snmp-server host 10.152.1.27 version 2c <rostring>
The specific error message captured from the IC_Server.log file:
[ Thu Sep 29 16:19:55 EST 2011 ],ERROR,[Thread-23],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,1075,Exception for device 172.22.41.9 is
java.lang.reflect.InvocationTargetException
at sun.reflect.GeneratedMethodAccessor24.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:1065)
at java.lang.Thread.run(Thread.java:662)
Caused by: com.cisco.nm.xms.xdi.ags.system.CollectionFailed: java.lang.StringIndexOutOfBoundsException: String index out of range: 2
at com.cisco.nm.xms.xdi.pkgs.LibInventory.EnergyWise_HelperMethods.getDeviceEnergyWise(EnergyWise_HelperMethods.java:77)
at com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.EnergyWiseAGI_ENERGYWISE_Mib.g$eval(EnergyWiseAGI_ENERGYWISE_Mib.java:51)
at com.cisco.nm.xms.xdi.ags.EnergyWiseAGI.g$eval(EnergyWiseAGI.java:21)
at com.cisco.nm.xms.xdi.SdiEngine.initAndEvalAGIs(SdiEngine.java:383)
at com.cisco.nm.xms.xdi.SdiEngine.request(SdiEngine.java:309)
at com.cisco.nm.xms.xdi.SdiEngine.getDevRepr(SdiEngine.java:302)
at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:687)
... 1 more
[ Thu Sep 29 16:19:55 EST 2011 ],ERROR,[Thread-23],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,1107, Collection failed for the device : 19
com.cisco.nm.xms.xdi.ags.system.CollectionFailed: java.lang.StringIndexOutOfBoundsException: String index out of range: 2
at com.cisco.nm.xms.xdi.pkgs.LibInventory.EnergyWise_HelperMethods.getDeviceEnergyWise(EnergyWise_HelperMethods.java:77)
at com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.EnergyWiseAGI_ENERGYWISE_Mib.g$eval(EnergyWiseAGI_ENERGYWISE_Mib.java:51)
at com.cisco.nm.xms.xdi.ags.EnergyWiseAGI.g$eval(EnergyWiseAGI.java:21)
at com.cisco.nm.xms.xdi.SdiEngine.initAndEvalAGIs(SdiEngine.java:383)
at com.cisco.nm.xms.xdi.SdiEngine.request(SdiEngine.java:309)
at com.cisco.nm.xms.xdi.SdiEngine.getDevRepr(SdiEngine.java:302)
at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:687)
at java.lang.Thread.run(Thread.java:662)
I have attached a more detailed output from the IC_Server.log file for the Inventory Collection job of the device.
The error at first glance appears to be related to EnergyWise, so I even tried creating an SNMP view that excludes the EnergyWise MIB with the following configuration:
snmp-server view EXCLUDE-ENERYGYWISE-MIB iso included
snmp-server view EXCLUDE-ENERYGYWISE-MIB ciscoEnergywiseMIB excluded
snmp-server community L1ghty3@rSnmp$ view EXCLUDE-ENERYGYWISE-MIB RO
snmp-server group ADMIN v3 auth read EXCLUDE-ENERYGYWISE-MIB
But that didn't seem to fix it, the Inventory Collection still fails. (Perhaps this configuration is incorrect?).
Has anyone experienced any issues like this? I have tried everything I can think of to fix this, and have trawled through the support forums but couldn't find anything.Hi,
First of all very nice research with logs
You are hitting the below bug , which will be fixed in LMS 4.2.However an official Patch will be release in the mid of october so you can conatct cisco to get the Patch for the same in October.
CSCts13593 Inventory collection fails due to VersionAPI code
Thanks
Afroj -
OS Version: 2000.4.3a
OS Service Release: 2000.4.5bSR21
OS Upgrade: 2000.4.5a
Bars Version: 4.0.15000
CUCM Version: 4.2(3)sr4b
During the upgrade process of our CUCM 4.2(3) to version CUCM 4.2(3)sr4b the database replication between our 2 servers (1x pub, 1x sub) failed. After fixing this via dbhelper tool (everthing´s green and smiling again) service seemed to be ok.
But now Cisco Bars does not work anymore. The backup process of the publisher fails with "Error=[Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user '(null)'. Reason: Not associated with a trusted SQL-Server connection." So it looks like some kind of database setting for bars is misconfigured after the republishing process.
Yesterday I tried to reinstall BARS (now in the newest version 4.0.150000), but the same error message occured. Now I get the message "Could not find Cisco Unified database on this server" when I try to configure the Backup source within BARS.
Curiously the backup of our second CCM (sub) works as expected (but without CDR and TFTP Data). The "BackAdmin" User exists and is not locked (and wasn´t changed manually at all).
I am runnig out of ideas... :-(
Any hint or idea on how to fix this is kindly appreciated
best regards
MichaelMike,
I don't have anything definitive here but I am wondering if there is a discrepency between the database names. In SQL Enterprise Manager, you can go to the Publisher and see what the current database name is. It will be the one being replicated and will take the form of CCM0300 or CCM0301 or CCM0302. You should see more than one. Anyway, take note of the name.
Then on the Publisher launch regedit and go to HKLM\Software\Cisco Systems, Inc.\DBL\
Look at the values for DBConnection0 and DBConnection1.
It will be something like DSN=CiscoCallManager;Server=;DATABASE=;Trusted_Connection=yes
Does the in the DSN match what you expect?
Also, going to back to SQL Enterprise Manager, check out the permissions on the database (Right Click->Properties, go to Permissions tab).
Another thing to check if you think it is permissions related is the AdminUtility.exe (c:\program files\cisco\bin\). This can be used to resync system account passwords.
TBH, I am just shooting in the dark here but these are things I would check.
Regards,
Bill -
Unable to start Oracle Reports Server for 10g version 10.1.2.3.0
Attention Oracle Reports Team or anyone else:
I am unable to start the Oracle Reports Server for 10g version 10.1.2.3.0 of the Application Server.
I have included the trace files see below. I marked the text in bold that might indicate the issues.
Any help will be greatly appreciated. Thank you.
Reports engine rwEng trace file:+
[2010/7/8 10:11:51:626] Debug 50103 (RWEngine:init): args[0]=name=rwEng-0
[2010/7/8 10:11:51:627] Debug 50103 (RWEngine:init): args[1]=server=myreportserver
[2010/7/8 10:11:51:627] Debug 50103 (RWEngine:init): args[2]=ORACLE_HOME=/myoraclehomepath
[2010/7/8 10:11:51:627] Debug 50103 (RWEngine:init): args[3]=engineimplclass=oracle.reports.engine.EngineImpl
[2010/7/8 10:11:51:627] Debug 50103 (RWEngine:init): args[4]=traceopts=trace_all
[2010/7/8 10:11:51:628] Debug 50103 (RWEngine:init): args[5]=tracefile=/myoraclehomepath/reports/logs/rwEng-0.trc
[2010/7/8 10:11:51:628] Debug 50103 (RWEngine:init): args[6]=tracemode=trace_append
[2010/7/8 10:11:51:628] Debug 50103 (RWEngine:init): args[7]=cacheDir=/myoraclehomepath/reports/cache
[2010/7/8 10:11:51:628] Debug 50103 (RWEngine:init): args[8]=server_ior="/tmp/myreportserver_xxxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:11:51:678] Info 50128 (RWEngine:init): orb init succeeded
[2010/7/8 10:11:52:108] Info 55007 (EngineImpl:loadLibrary): Load librw.so succeeded
[2010/7/8 10:11:52:108] Debug 50103 (EngineImpl:init): useDataCache = null
[2010/7/8 10:11:52:108] Debug 50103 (EngineImpl:init): ignoreDataParameter = null
[2010/7/8 10:11:52:115] Debug 50103 (EngineImpl:EngineImpl): start CInitEngine()
[2010/7/8 10:11:52:115] Debug 50103 (EngineImpl:EngineImpl): commandline[0] = rw
[2010/7/8 10:11:52:115] Debug 50103 (EngineImpl:EngineImpl): commandline[1] = ora_rw20_3tng
[2010/7/8 10:11:52:115] Debug 50103 (EngineImpl:EngineImpl): commandline[2] = myreportserver
[2010/7/8 10:11:52:115] Debug 50103 (EngineImpl:EngineImpl): commandline[3] = /myoraclehomepath/reports/cache
[2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[4] = null
[2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[5] = null
[2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[6] = trace_all
[2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[7] = /myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc
[2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[8] = trace_append
[2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[9] = null
[2010/7/8 10:11:52:117] Debug 50103 (EngineImpl:EngineImpl): commandline[10] = null
[2010/7/8 10:11:52:117] Debug 50103 (EngineImpl:EngineImpl): commandline[11] = null
*[2010/7/8 10:11:58:329] Error 50103 (C Engine): 10:11:58 ERR REP-3000: Internal error starting Oracle Toolkit.*
*[2010/7/8 10:11:58:329] Error 50103 (C Engine): 10:11:58 ERR REP-3000: Internal error starting Oracle Toolkit.*
[2010/7/8 10:11:58:330] (C Engine)
[2010/7/8 10:11:58:330] (C Engine)
| Reports Builder Profiler statistics |
[2010/7/8 10:11:58:330] (C Engine)
[2010/7/8 10:11:58:330] (C Engine)
TOTAL ELAPSED Time: 6.06 seconds
[2010/7/8 10:11:58:331] (C Engine)
Reports Time: 6.06 seconds
[2010/7/8 10:11:58:331] (C Engine) (100.00% of TOTAL)
[2010/7/8 10:11:58:331] (C Engine)
ORACLE Time: 0.00 seconds
[2010/7/8 10:11:58:331] (C Engine) ( 0.00% of TOTAL)
[2010/7/8 10:11:58:331] (C Engine)
UPI: 0.00 seconds
[2010/7/8 10:11:58:332] (C Engine)
SQL: 0.00 seconds
[2010/7/8 10:11:58:332] (C Engine)
TOTAL CPU Time used by process: 1.08 seconds
[2010/7/8 10:11:58:340] Debug 50103 (EngineImpl:EngineImpl): CInitEngine returns 3000
[2010/7/8 10:11:59:129] Debug 50103 (RWEngine:init): args[0]=name=rwEng-0
[2010/7/8 10:11:59:130] Debug 50103 (RWEngine:init): args[1]=server=myreportserver
[2010/7/8 10:11:59:130] Debug 50103 (RWEngine:init): args[2]=ORACLE_HOME=/myoraclehomepath
[2010/7/8 10:11:59:130] Debug 50103 (RWEngine:init): args[3]=engineimplclass=oracle.reports.engine.EngineImpl
[2010/7/8 10:11:59:130] Debug 50103 (RWEngine:init): args[4]=traceopts=trace_all
[2010/7/8 10:11:59:131] Debug 50103 (RWEngine:init): args[5]=tracefile=/myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc
[2010/7/8 10:11:59:131] Debug 50103 (RWEngine:init): args[6]=tracemode=trace_append
[2010/7/8 10:11:59:131] Debug 50103 (RWEngine:init): args[7]=cacheDir=/myoraclehomepath/reports/cache
[2010/7/8 10:11:59:131] Debug 50103 (RWEngine:init): args[8]=server_ior="/tmp/myreportserver_xxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:11:59:179] Info 50128 (RWEngine:init): orb init succeeded
[2010/7/8 10:11:59:593] Info 55007 (EngineImpl:loadLibrary): Load librw.so succeeded
[2010/7/8 10:11:59:593] Debug 50103 (EngineImpl:init): useDataCache = null
[2010/7/8 10:11:59:594] Debug 50103 (EngineImpl:init): ignoreDataParameter = null
[2010/7/8 10:11:59:597] Debug 50103 (EngineImpl:EngineImpl): start CInitEngine()
[2010/7/8 10:11:59:598] Debug 50103 (EngineImpl:EngineImpl): commandline[0] = rw
[2010/7/8 10:11:59:598] Debug 50103 (EngineImpl:EngineImpl): commandline[1] = ora_rw20_3tng
[2010/7/8 10:11:59:598] Debug 50103 (EngineImpl:EngineImpl): commandline[2] = myreportserver
[2010/7/8 10:11:59:598] Debug 50103 (EngineImpl:EngineImpl): commandline[3] = /myoraclehomepath/reports/cache
[2010/7/8 10:11:59:598] Debug 50103 (EngineImpl:EngineImpl): commandline[4] = null
[2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[5] = null
[2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[6] = trace_all
[2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[7] = /myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc
[2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[8] = trace_append
[2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[9] = null
[2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[10] = null
[2010/7/8 10:11:59:600] Debug 50103 (EngineImpl:EngineImpl): commandline[11] = null
*[2010/7/8 10:12:5:757] Error 50103 (C Engine): 10:12:05 ERR REP-3000: Internal error starting Oracle Toolkit.*
*[2010/7/8 10:12:5:758] Error 50103 (C Engine): 10:12:05 ERR REP-3000: Internal error starting Oracle Toolkit.*
[2010/7/8 10:12:5:758] (C Engine)
[2010/7/8 10:12:5:758] (C Engine)
| Reports Builder Profiler statistics |
[2010/7/8 10:12:5:758] (C Engine)
[2010/7/8 10:12:5:759] (C Engine)
TOTAL ELAPSED Time: 6.06 seconds
[2010/7/8 10:12:5:759] (C Engine)
Reports Time: 6.06 seconds
[2010/7/8 10:12:5:759] (C Engine) (100.00% of TOTAL)
[2010/7/8 10:12:5:759] (C Engine)
ORACLE Time: 0.00 seconds
[2010/7/8 10:12:5:760] (C Engine) ( 0.00% of TOTAL)
[2010/7/8 10:12:5:760] (C Engine)
UPI: 0.00 seconds
[2010/7/8 10:12:5:760] (C Engine)
SQL: 0.00 seconds
[2010/7/8 10:12:5:760] (C Engine)
TOTAL CPU Time used by process: 1.01 seconds
[2010/7/8 10:12:5:769] Debug 50103 (EngineImpl:EngineImpl): CInitEngine returns 3000
[2010/7/8 10:12:6:475] Debug 50103 (RWEngine:init): args[0]=name=rwEng-0
[2010/7/8 10:12:6:475] Debug 50103 (RWEngine:init): args[1]=server=myreportserver
[2010/7/8 10:12:6:475] Debug 50103 (RWEngine:init): args[2]=ORACLE_HOME=/myoraclehomepath
[2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[3]=engineimplclass=oracle.reports.engine.EngineImpl
[2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[4]=traceopts=trace_all
[2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[5]=tracefile=/myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc
[2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[6]=tracemode=trace_append
[2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[7]=cacheDir=/myoraclehomepath/reports/cache
[2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[8]=server_ior="/tmp/myreportserver_xxxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:12:6:523] Info 50128 (RWEngine:init): orb init succeeded
[2010/7/8 10:12:6:942] Info 55007 (EngineImpl:loadLibrary): Load librw.so succeeded
[2010/7/8 10:12:6:942] Debug 50103 (EngineImpl:init): useDataCache = null
[2010/7/8 10:12:6:942] Debug 50103 (EngineImpl:init): ignoreDataParameter = null
[2010/7/8 10:12:6:946] Debug 50103 (EngineImpl:EngineImpl): start CInitEngine()
[2010/7/8 10:12:6:946] Debug 50103 (EngineImpl:EngineImpl): commandline[0] = rw
[2010/7/8 10:12:6:946] Debug 50103 (EngineImpl:EngineImpl): commandline[1] = ora_rw20_3tng
[2010/7/8 10:12:6:946] Debug 50103 (EngineImpl:EngineImpl): commandline[2] = myreportserver
[2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[3] = /myoraclehomepath/reports/cache
[2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[4] = null
[2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[5] = null
[2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[6] = trace_all
[2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[7] = /myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc
[2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[8] = trace_append
[2010/7/8 10:12:6:948] Debug 50103 (EngineImpl:EngineImpl): commandline[9] = null
[2010/7/8 10:12:6:948] Debug 50103 (EngineImpl:EngineImpl): commandline[10] = null
[2010/7/8 10:12:6:948] Debug 50103 (EngineImpl:EngineImpl): commandline[11] = null
*[2010/7/8 10:12:13:91] Error 50103 (C Engine): 10:12:13 ERR REP-3000: Internal error starting Oracle Toolkit.*
*[2010/7/8 10:12:13:91] Error 50103 (C Engine): 10:12:13 ERR REP-3000: Internal error starting Oracle Toolkit.*
[2010/7/8 10:12:13:91] (C Engine)
[2010/7/8 10:12:13:92] (C Engine)
| Reports Builder Profiler statistics |
[2010/7/8 10:12:13:92] (C Engine)
[2010/7/8 10:12:13:92] (C Engine)
TOTAL ELAPSED Time: 6.05 seconds
[2010/7/8 10:12:13:92] (C Engine)
Reports Time: 6.05 seconds
[2010/7/8 10:12:13:92] (C Engine) (100.00% of TOTAL)
[2010/7/8 10:12:13:93] (C Engine)
ORACLE Time: 0.00 seconds
[2010/7/8 10:12:13:93] (C Engine) ( 0.00% of TOTAL)
[2010/7/8 10:12:13:93] (C Engine)
UPI: 0.00 seconds
[2010/7/8 10:12:13:93] (C Engine)
SQL: 0.00 seconds
[2010/7/8 10:12:13:93] (C Engine)
TOTAL CPU Time used by process: 1.02 seconds
*[2010/7/8 10:12:13:102] Debug 50103 (EngineImpl:EngineImpl): CInitEngine returns 3000*
reports engine rwURLEng trace file:+
*** 2010/7/8 10:11:47:306 -- Reading server config file /myoraclehomepath/reports/conf/myreportserver.conf
*** 2010/7/8 10:11:47:307 -- <server version="10.1.2.3.0">
<cache class="oracle.reports.cache.RWCache">
<property name="cacheSize" value="50"/>
<!--property name="cacheDir" value="your cache directory"/-->
<!--property name="maxCacheFileNumber" value="max number of cache files"/-->
<!--property name="ignoreParameters" value="parameter names to be ignored in constructing cache key, separated by comma ','"/-->
</cache>
<!--Please do not change the id for reports engine.-->
<!--The class specifies below is subclass of _EngineClassImplBase and implements EngineInterface.-->
<engine id="rwEng" class="oracle.reports.engine.EngineImpl" initEngine="1" maxEngine="4" minEngine="1" engLife="50" maxIdle="30" callbackTimeOut="90000">
<!--property name="sourceDir" value="your reports source directory"/-->
<!--property name="tempDir" value="your reports temp directory"/-->
</engine>
<engine id="rwURLEng" class="oracle.reports.urlengine.URLEngineImpl" initEngine="1" maxEngine="4" minEngine="1" engLife="50" maxIdle="30" callbackTimeOut="90000"/>
<!--security id="rwSec" class="oracle.reports.server.RWSecurity">
<property name="securityUserid" value="%PORTAL_DB_USERNAME%/%PORTAL_DB_PASSWORD%@%PORTAL_DB_TNSNAME%" confidential="yes" encrypted="no"/>
<property name="oidEntity" value="reportsApp_myhostname_xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"/>
</security-->
<!--destination destype="oraclePortal" class="oracle.reports.server.DesOraclePortal">
<property name="portalUserid" value="%PORTAL_DB_USERNAME%/%PORTAL_DB_PASSWORD%@%PORTAL_DB_TNSNAME%" confidential="yes" encrypted="no"/>
</destination-->
<destination destype="ftp" class="oracle.reports.plugin.destination.ftp.DesFTP">
<!--property name="proxy" value="proxyinfo.xml"/-->
</destination>
<destination destype="WebDav" class="oracle.reports.plugin.destination.webdav.DesWebDAV">
<!--property name="proxy" value="proxyinfo.xml"/-->
</destination>
<!-- By default server will use rwnetwork.conf as network config file
Use this element to override the same -->
<!--networkConfig file="rwnetwork.conf"></networkConfig-->
<job jobType="report" engineId="rwEng" securityId="rwSec"/>
<job jobType="rwurl" engineId="rwURLEng" securityId="rwSec"/>
<notification id="mailNotify" class="oracle.reports.server.MailNotify">
<property name="succnotefile" value="succnote.txt"/>
<property name="failnotefile" value="failnote.txt"/>
</notification>
<!--notification id="wfNotify" class="oracle.reports.server.WorkflowNotify">
<property name="connStr" value="%WF_DB_USERNAME%/%WF_DB_PASSWORD%@%WF_DB_TNSNAME%" confidential="yes" encrypted="no"/>
</notification-->
<log option="noJob"/>
<!--jobStatusRepository class="oracle.reports.server.JobRepositoryDB">
<property name="repositoryConn" value="repo_db_username/repo_db_password@repo_db_tnsname" confidential="yes" encrypted="no"/>
</jobStatusRepository-->
<trace traceOpts="trace_all" traceMode="trace_append"/>
<connection maxConnect="20" idleTimeOut="15">
<orbClient id="RWClient" publicKeyFile="clientpub.key"/>
</connection>
<queue maxQueueSize="1000"/>
<!--jobRecovery auxDatFiles="yes"/-->
<!--
The value of the 'identifier' element is encrypted and is of the form SERVERACCESSKEY_USER/SERVERACCESSKEY_PASSWORD
SERVERACCESSKEY_USER and SERVERACCESSKEY_PASSWORD in <server>.conf and targets.xml
file should match for Reports EM pages to display data correctly.
Corresponding entries of username and password in targets.xml:
<Property NAME="Password" VALUE="SERVERACCESSKEY_PASSWORD" ENCRYPTED="FALSE"/>
<Property NAME="UserName" VALUE="SERVERACCESSKEY_USER" ENCRYPTED="FALSE"/>
-->
<!--pluginParam name="mailServer">stmail.oracle.com</pluginParam-->
<!--pluginParam name="proxy" type="file">proxyinfo.xml</pluginParam-->
<pluginParam name="xmlpds" type="file">xmlpds.conf</pluginParam>
<pluginParam name="jdbcpds" type="file">jdbcpds.conf</pluginParam>
<pluginParam name="textpds" type="file">textpds.conf</pluginParam>
</server>
*** 2010/7/8 10:11:47:308 -- Reports Server is starting up
*** 2010/7/8 10:11:51:982 -- Reports Server started up engine rwURLEng-0
*** *2010/7/8 10:12:13:175 -- Shutting down engine rwURLEng-0*
*** *2010/7/8 10:12:13:177 -- Reports Server shut down engine rwURLEng-0*
*** 2010/7/8 10:12:13:178 -- Server is shutting down
Why does the rwURLEng engine start up and then immediately shut down?+
reports server trace file:+
[2010/7/8 10:11:47:276] Debug 50103 (EnvironmentUtility:getEnvironment): XFILESEARCHPATH=/usr/dt/app-defaults/%L/Dt
[2010/7/8 10:11:47:277] Debug 50103 (EnvironmentUtility:getEnvironment): NLSPATH=/usr/dt/lib/nls/msg/%L/%N.cat
[2010/7/8 10:11:47:277] Debug 50103 (EnvironmentUtility:getEnvironment): DEBUG_SLFIND=/myapppath/log/mydebuglogfile.log
[2010/7/8 10:11:47:277] Debug 50103 (EnvironmentUtility:getEnvironment): DISPLAY=myhostname:0.0
[2010/7/8 10:11:47:277] Debug 50103 (EnvironmentUtility:getEnvironment): LD_LIBRARY_PATH=/myoraclehomepath/jdk/jre/lib/sparc:/myoraclehomepath/lib:/myoraclehomepath/opmn/lib:/myoraclehomepath/lib32
[2010/7/8 10:11:47:278] Debug 50103 (EnvironmentUtility:getEnvironment): NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
[2010/7/8 10:11:47:278] Debug 50103 (EnvironmentUtility:getEnvironment): ORACLE_CONFIG_HOME=/myoraclehomepath
[2010/7/8 10:11:47:278] Debug 50103 (EnvironmentUtility:getEnvironment): ORACLE_HOME=/myoraclehomepath
[2010/7/8 10:11:47:278] Debug 50103 (EnvironmentUtility:getEnvironment): ORA_NLS33=/myoraclehomepath/ocommon/nls/admin/data
[2010/7/8 10:11:47:283] Debug 50103 (EnvironmentUtility:getEnvironment): PATH=/myoraclehomepath/jdk/bin:/myoraclehomepath/bin:/myoraclehomepath/jdk/bin:/myoraclehomepath/bin:/myoraclehomepath/dcm/bin:/myoraclehomepath/bin:/myoraclehomepath/Apache/Apache/bin:/myoraclehomepath/opmn/bin:/myoraclehomepath/dcm/bin:/bin:/usr/bin:/etc:/usr/ccs/bin:/usr/local/bin:/usr/ucb:/usr/sbin:/export/home/oracle:/usr/bin:/bin
[2010/7/8 10:11:47:283] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_CLASSPATH=/myoraclehomepath/reports/jlib/rwbuilder.jar:/myoraclehomepath/reports/jlib/rwrun.jar:/myoraclehomepath/jlib/zrclient.jar:/myoraclehomepath/j2ee/home/oc4j.jar:/myoraclehomepath/j2ee/home/lib/ojsp.jar:/myoraclehomepath/reports/jlib/oraclebarcode.jar
[2010/7/8 10:11:47:283] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_DEFAULT_DISPLAY=NO
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_NO_DUMMY_PRINTER=TRUE
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_PATH=/myapppath/bin:/myapppath/util/bin:/myoraclehomepath/guicommon/tk/admin/TTF:/myoraclehomepath/reports/templates:/myoraclehomepath/reports/samples/demo:/myoraclehomepath/reports/integ:/myoraclehomepath/reports/printers
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_TAGLIB_URI=/WEB-INF/lib/reports_tld.jar
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_TMP=/tmp
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): RW=/myoraclehomepath/reports
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): SHELL=/usr/bin/ksh
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): TK_DEBUG_POSTSCRIPT=Func/L/Mem
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): TK_ICON=/myoraclehomepath/reports/plugins/resource
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): TMP=/tmp
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): TNS_ADMIN=/myapppath
[2010/7/8 10:11:47:285] Debug 50103 (EnvironmentUtility:getEnvironment): TZ=US/Eastern
[2010/7/8 10:11:47:285] Debug 50103 (EnvironmentUtility:getEnvironment): X_LD_LIBRARY_PATH_64=/myoraclehomepath/lib
[2010/7/8 10:11:47:285] Debug 50103 (EnvironmentUtility:getEnvironment): NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
[2010/7/8 10:11:47:285] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_TMP=/tmp
[2010/7/8 10:11:47:308] Info 56025 (RWServer:startServer): Reports Server is starting up
[2010/7/8 10:11:47:503] Debug 50103 (JobManager:start): Using Maximum Job Retry value = 0
[2010/7/8 10:11:47:526] Info 65000 (Multicast:init): Communication channel initialized
[2010/7/8 10:11:47:528] Debug 50103 (Multicast:registerReceiver): Packet handler registered
[2010/7/8 10:11:47:529] Info 50103 (ServerPacketHandler:start): ServerPacketHandler started successfully
[2010/7/8 10:11:47:532] Info 50103 (RWServer:startServer): Using multicast mechanism
[2010/7/8 10:11:47:562] Debug 50103 (ServerPacketReceiver:handleRequestPacket): Received packets. Multicast is working
[2010/7/8 10:11:48:561] Debug 50103 (ServerPacketReceiver:handleRequestPacket): Received packets. Multicast is working
[2010/7/8 10:11:49:572] Debug 50103 (ServerPacketReceiver:handleRequestPacket): Received packets. Multicast is working
[2010/7/8 10:11:50:589] Info 56023 (ServerImpl:ServerImpl): Idle thread has been started
[2010/7/8 10:11:50:691] Info 56020 (EngineManager:spawnEngine): Launching engine rwEng-0
[2010/7/8 10:11:50:691] Info 50103 (EngineManager:spawnEngine): OS Name = SunOS : OS Arch = sparc
[2010/7/8 10:11:51:56] Info 50103 (RWLocaleUtility:RWLocaleUtility): Using oracle.i18n.util.LocaleMapper class
[2010/7/8 10:11:51:58] Debug 50103 (EngineManager:spawnEngine): Start engine command line = /myoraclehomepath/bin/rwengine.sh -server -cp /myoraclehomepath/j2ee/home/lib/ojsp.jar:/myoraclehomepath/reports/jlib/rwrun.jar:/myoraclehomepath/jlib/zrclient.jar -Duser.language=en -Duser.region=US -Xmx256M oracle.reports.engine.RWEngine name=rwEng-0 server=myreportserver ORACLE_HOME=/myoraclehomepath engineimplclass=oracle.reports.engine.EngineImpl traceopts=trace_all tracefile=/myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc tracemode=trace_append cacheDir=/myoraclehomepath/reports/cache server_ior="/tmp/myreportserver_xxxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:11:51:95] Info 56021 (EngineManager:spawnEngine): Engine rwEng-0 has been launched
[2010/7/8 10:11:51:95] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Initial
[2010/7/8 10:11:51:97] Info 56020 (EngineManager:spawnEngine): Launching engine rwURLEng-0
[2010/7/8 10:11:51:98] Info 50103 (EngineManager:spawnEngine): OS Name = SunOS : OS Arch = sparc
[2010/7/8 10:11:51:99] Debug 50103 (EngineManager:spawnEngine): Start engine command line = /myoraclehomepath/bin/rwengine.sh -server -cp /myoraclehomepath/j2ee/home/lib/ojsp.jar:/myoraclehomepath/reports/jlib/rwrun.jar:/myoraclehomepath/jlib/zrclient.jar -Duser.language=en -Duser.region=US -Xmx256M oracle.reports.engine.RWEngine name=rwURLEng-0 server=myreportserver ORACLE_HOME=/myoraclehomepath engineimplclass=oracle.reports.urlengine.URLEngineImpl traceopts=trace_all tracefile=/myoraclehomepath/reports/logs/myreportserver/rwURLEng-0.trc tracemode=trace_append cacheDir=/myoraclehomepath/reports/cache server_ior="/tmp/myreportserver_xxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:11:51:129] Info 56021 (EngineManager:spawnEngine): Engine rwURLEng-0 has been launched
[2010/7/8 10:11:51:129] State 56004 (EngineInfo:setState): Engine rwURLEng-0 state is: Initial
[2010/7/8 10:11:51:131] Debug 50103 (JobStore:writePersistFile): Purge persistent file
[2010/7/8 10:11:51:169] Debug 50103 (JobStore:writePersistFile): Purge persistent file done
*[2010/7/8 10:11:51:981] Warning 50103 (EngineManager:registerEngine): REP-55103: API URLEngine:getEngineEnvs not applicable to URL engine*
[2010/7/8 10:11:51:982] Info 56026 (EngineManager:registerEngine): Reports Server started up engine rwURLEng-0
[2010/7/8 10:11:51:998] Debug 50103 (EngineManager:updateEngineState): Engine rwURLEng-0 status is 1
[2010/7/8 10:11:51:998] State 56004 (EngineInfo:setState): Engine rwURLEng-0 state is: Ready
[2010/7/8 10:11:58:490] Info 50103 (EngineManager:manage): Engine restart count: 1
[2010/7/8 10:11:58:590] Info 56020 (EngineManager:spawnEngine): Launching engine rwEng-0
[2010/7/8 10:11:58:590] Info 50103 (EngineManager:spawnEngine): OS Name = SunOS : OS Arch = sparc
[2010/7/8 10:11:58:592] Debug 50103 (EngineManager:spawnEngine): Start engine command line = /myoraclehomepath/bin/rwengine.sh -server -cp /myoraclehomepath/j2ee/home/lib/ojsp.jar:/myoraclehomepath/reports/jlib/rwrun.jar:/myoraclehomepath/jlib/zrclient.jar -Duser.language=en -Duser.region=US -Xmx256M oracle.reports.engine.RWEngine name=rwEng-0 server=myreportserver ORACLE_HOME=/myoraclehomepath engineimplclass=oracle.reports.engine.EngineImpl traceopts=trace_all tracefile=/myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc tracemode=trace_append cacheDir=/myoraclehomepath/reports/cache server_ior="/tmp/myreportserver_xxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:11:58:623] Info 56021 (EngineManager:spawnEngine): Engine rwEng-0 has been launched
[2010/7/8 10:11:58:624] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Initial
[2010/7/8 10:12:5:832] Info 50103 (EngineManager:manage): Engine restart count: 2
[2010/7/8 10:12:5:932] Info 56020 (EngineManager:spawnEngine): Launching engine rwEng-0
[2010/7/8 10:12:5:934] Info 50103 (EngineManager:spawnEngine): OS Name = SunOS : OS Arch = sparc
[2010/7/8 10:12:5:935] Debug 50103 (EngineManager:spawnEngine): Start engine command line = /myoraclehomepath/bin/rwengine.sh -server -cp /myoraclehomepath/j2ee/home/lib/ojsp.jar:/myoraclehomepath/reports/jlib/rwrun.jar:/myoraclehomepath/jlib/zrclient.jar -Duser.language=en -Duser.region=US -Xmx256M oracle.reports.engine.RWEngine name=rwEng-0 server=myreportserver ORACLE_HOME=/myoraclehomepath engineimplclass=oracle.reports.engine.EngineImpl traceopts=trace_all tracefile=/myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc tracemode=trace_append cacheDir=/myoraclehomepath/reports/cache server_ior="/tmp/myreportserver_xxxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:12:5:963] Info 56021 (EngineManager:spawnEngine): Engine rwEng-0 has been launched
[2010/7/8 10:12:5:964] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Initial
*[2010/7/8 10:12:13:174] Exception 56105 (): Engine rwEng-0 died with error:*
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
at oracle.reports.utility.Utility.newRWException(Utility.java:758)
at oracle.reports.server.EngineManager.manage(EngineManager.java:367)
at oracle.reports.server.IdleThread.run(IdleThread.java:88)
*[2010/7/8 10:12:13:175] Info 56029 (EngineManager:shutdownEngine): Shutting down engine rwURLEng-0*
[2010/7/8 10:12:13:176] State 56004 (EngineInfo:setState): Engine rwURLEng-0 state is: Shutdown
[2010/7/8 10:12:13:177] Info 56047 (EngineManager:remove): Reports Server shut down engine rwURLEng-0
[2010/7/8 10:12:13:177] Info 50103 (ServerPacketHandler:stop): Multicastmanager stopped successfully
[2010/7/8 10:12:13:178] Info 50002 (RWServer:shutdown): Server is shutting down
[2010/7/8 10:12:13:178] Info 50103 (RWServer:startServer): Notify thread to exit
Why does the trace file indicate that the rwEng engine died with error?+
Again why does the rwURLEng engine start up and then immediately shut down?+
Thank you for your help on this issue.+OK, I did this once and did not follow the oracle docs
If you saved your targets.xml before you started you might save it by renaming it back.
(Double check to make sure you did not miss a rename)
Otherwise, all I have to offer is my rough notes:
1. Backup the file $ORACLE_HOME/sysman/emd/targets.xml.
[oracle@ias02 emd]$ pwd
/u01/app/oracle/product/midtier/sysman/emd
cp targets.xml targets.xmlbackup
2. Modify the file targets.xml by changing all the occurrences of the wrong reports server name by the correct one.
i.e. Replace rep_test_midtier with rep_new (4 places - changes)
Copy the conf file as follows: ( this will named different from system to system )
cp /u01/app/oracle/product/midtier/reports/conf/rep_pia_oracleas.conf /u01/app/oracle/product/midtier/reports/conf/rep_fam.conf
run this script:
/u01/app/oracle/product/midtier/bin/addNewServerTarget.sh rep_fam (change rep_fam to new report server name)
3.Update the changed configuration .
/u01/app/oracle/product/midtier/dcm/bin/dcmctl updateconfig -ct opmn -v -d
/u01/app/oracle/product/midtier/dcm/bin/dcmctl resyncinstance -v -d
4. Restart the Application Server Control Console
/u01/app/oracle/product/midtier/bin/emctl stop iasconsole
/u01/app/oracle/product/midtier/bin/emctl start iasconsole
In the file:
/u01/app/oracle/product/midtier/reports/config/reportsConfig.properties
Change the Reports_Server_Name setting from rep_test_midtier to rep_fam (change rep_fam to new report server name)
Best Wishes (I was able to save mime)
The other option is to reinstall -
Presently we are using forms 4.5. We have got costomise key
mapping for operating through forms. Now we want to start forms
on web (Intranet). Earlier we use to change key mapping through
oracle*terminal. I require help in knowing how to customise key
mapping in forms 6i / oracle 8.1.7.Hi,
Boy, I have some good news to you: Oracle*Terminal is no longer
needed.
WordPad (or your favorite text editor) is your tool from now on.
Keyboard files are located in $ORACLE_HOME\FORMS60.
Simply ignore the binary file fmrusw.res when you run Forms on
the Web. FMRWEB.RES is the one that is used, and it's pure ASCII.
There are some comments in the file itself.
The keys are the same as the Motif version of Forms.
If you prefer the Windows keys, simply use FMRPCWEB.RES instead.
How? Check under $ORACLE_HOME\FORMS60\SERVER for your
formsweb.cfg, go to User Parameters and replace the
otherparams=
line with
otherparams=term=%forms60%\fmrpcweb.res
Now, anyone can define the Function-0 till Function-9 key
combinations, in order to use KEY-F0 till KEY-F9 triggers.
Hope this helps,
Pedro das Neves
[email protected] -
Problem statement
When I mount a Windows NFS service file share using UUUA and set the Owner and Group, and set the SetGID bit on the parent folder in a hierarchy. New Files and folders inside and underneath the parent folder do not inherit the Owner and Group permissions
of the parent.
I am given to understand from this Microsoft KnowledgeBase article (http://support.microsoft.com/kb/951716/en-gb) the problem is due to the Windows implmentation of NFS Services not supporting the Solaris SystemV or BSD grpid "Semantics"
However the article says the same functionality can acheived by using ACE Inheritance in conjunction with changing the Registry setting for "KeepInheritance" to enable Inheritance propagation of the Permissions by the Windows NFS Services.
1. The Precise location of the "KeepInheritance" DWORD key appears to have "moved" in Windows Server 2012 from a Services path to a Software path, is this documented somewhere? And after enabling it, (or creating it in the previous
location) the feature seems non-functional. Is there a method to file a Bug with Microsoft for this Feature?
2. All of the references on demonstrating how to set an ACE to achieve the same result "currently" either lead to broken links on Microsoft technical websites, or are not explicit they are vague or circumreferential. There are no plain Examples.
Can an Example be provided?
3. Is UUUA compatible with the method of setting ACE to acheive this result, or must the Linux client mount be "Mapped" using an Authentication source. And could that be with the new Flat File passwd and group files in c:\windows\system32\drivers\etc
and is there an Example available.
Scenario:
Windows Server 2012 Standard
File Server (Role)
+- Server for NFS (Role) << -- installed
General --
Folder path: F:\Shares\raid-6-array
Remote path: fs4:/raid-6-array
Protocol: NFS
Authentication --
No server authentication
+- No server authentication (AUTH_SYS)
++- Enable unmapped user access
+++- Allow unmapped user access by UID/GID
Share Permissions --
Name: linux_nfs_client.host.edu
Permissions: Read/Write
Root Access: Allowed
Encoding: ANSI
NTFS Permissions --
Type: Allow
Principal: BUILTIN\Administrators
Access: Full Control
Applies to: This folder only
Type: Allow
Principal: NT AUTHORITY\SYSTEM
Access: Full Control
Applies to: This folder only
-- John Willis, Facebook: John-Willis, Skype: john.willis7416I'm making some "major" progress on this problem.
1. Apparently the "semantics" issue to honor SGID or grpid in NFS on the server side or the client side has been debated for some time. It also existed as of 2009 between Solaris nfs server and Linux nfs clients. The Linux community defaulted to declaring
it a "Server" side issue to avoid "Race" conditions between simultaneous access users and the local file system daemons. The client would have to "check" for the SGID and reformulate its CREATE request to specify the Secondary group it would have to "notice"
by which time it could have changed on the server. SUN declined to fix it.. even though there were reports it did not behave the same between nfs3 vs nfs4 daemons.. which might be because nfs4 servers have local ACL or ACE entries to process.. and a new local/nfs
"inheritance" scheme to worry about honoring.. that could place it in conflict with remote access.. and push the responsibility "outwards" to the nfs client.. introducing a race condition, necessitating "locking" semantics.
This article covers that discovery and no resolution - http://thr3ads.net/zfs-discuss/2009/10/569334-CR6894234-improved-sgid-directory-compatibility-with-non-Solaris-NFS-clients
2. A much Older Microsoft Knowledge Based article had explicit examples of using Windows ACEs and Inheritance to "mitigate" the issue.. basically the nfs client "cannot" update an ACE to make it "Inheritable" [-but-] a Windows side Admin or Windows User
[-can-] update or promote an existing ACE to "Inheritable"
Here are the pertinent statements -
"In Windows Services for UNIX 2.3, you can use the KeepInheritance registry value to set inheritable ACEs and to make sure that these ACEs apply to newly created files and folders on NFS shares."
"Note About the Permissions That Are Set by NFS Clients
The KeepInheritance option only applies ACEs that have inheritance enabled. Any permissions that are set by an NFS client will
only apply to that file or folder, so the resulting ACEs created by an NFS client will
not have inheritance set."
"So
If you want a folder's permissions to be inherited to new subfolders and files, you must set its permissions from the Windows NFS server because the permissions that are set by NFS clients only apply to the folder itself."
http://support.microsoft.com/default.aspx?scid=kb;en-us;321049
3. I have set up a Windows 2008r2 NFS server and mounted it with a Redhat Enteprise Linux 5 release 10 x86_64 server [Oct 31, 2013] and so far this does appear to be the case.
4. In order to mount and then switch user to a non-root user to create subdirectories and files, I had to mount the NFS share (after enabling Anonymous AUTH_SYS mapping) this is not a good thing, but it was because I have been using UUUA - Unmapped Unix
User Access Mapping, which makes no attempt to "map" a Unix UID/GID set by the NFS client to a Windows User account.
To verify the Inheritance of additional ACEs on new subdirectories and files created by a non-root Unix user, on the Windows NFS server I used the right click properties, security tab context menu, then Advanced to list all the ACEs and looked at the far
Column reflecting if it applied to [This folder only, or This folder and Subdirectories, or This folder and subdirectories and files]
5. All new Subdirectories and files createdby the non-root user had a [Non-Inheritance] ACE created for them.
6. I turned a [Non-Inheritance] ACE into an [Inheritance] ACE by selecting it then clicking [Edit] and using the Drop down to select [This folder, subdirs and files] then I went back to the NFS client and created more subdirs and files. Then back to the
Windows NFS server and checked the new subdirs and folders and they did Inherit the Windows NFS server ACE! - However the UID/GID of the subdirs and folders remained unchanged, they did not reflect the new "Effective" ownership or group membership.
7. I "believe" because I was using UUUA and working "behind" the UID/GID presentation layer for the NFS client, it did not update that presentation layer. It might do that "if" I were using a Mapping mechanism and mapped UID/GID to Windows User SIDs and
Group SIDs. Windows 2008r2 no longer has a "simple" Mapping server, it does not accept flat text files and requires a Schema extension to Active Directory just to MAP a windows account to a UID/GID.. a lot of overhead. Windows Server 2012 accepts flat text
files like /etc/passwd and /etc/group to perform this function and is next on my list of things to see if that will update the UID/GID based on the Windows ACE entries. Since the Local ACE take precedence "over" Inherited ACEs there could be a problem. The
Inheritance appears to be intended [only] to retain Administrative rights over user created subdirs and files by adding an additional ACE at the time of creation.
8. I did verify from the NFS client side in Linux that "Even though" the UID/GID seem to reflect the local non-root user should not have the ability to traverse or create new files, the "phantom" NFS Server ACEs are in place and do permit the function..
reconciling the "view" with "reality" appears problematic, unless the User Mapping will update "effective" rights and ownership in the "view"
-- John Willis, Facebook: John-Willis, Skype: john.willis7416 -
Problem on installing Solaris 10 on Cisco UCS-C24-M3S2 rack server.
I've got issue on installing Solaris 10 on Cisco UCS-C24-M3S2 rack server. Solaris 10 doesn't recognize UCSC-RAID-ROM55.
Hi dipaktimsina,
From the documentation below it looks like Solaris doesn't have support for the embedded raid controller with the ROM55 chip.
http://www.cisco.com/web/techdoc/ucs/interoperability/matrix/matrix.html
let me know if you have any questions and don't forget to rate any useful answers. -
Problems Starting Weblogic Server for Tutorials (Fresh install)...
Hi guys, need a little help here.
I'm trying to startup Weblogic Server for Java Control Tutorial application and I get all sorts of errors, mostly seeming to deal with JMS/JNDI network stuff. Here's the error dump I get:
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.4.2_05"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_05-b04)
Java HotSpot(TM) Client VM (build 1.4.2_05-b04, mixed mode)
Starting WLS with line:
C:\bea\JDK142~1\bin\java -client -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket
,address=8453,server=y,suspend=n -Djava.compiler=NONE -Xms256m -Xmx256m -XX:Com
pileThreshold=8000 -XX:PermSize=32m -XX:MaxPermSize=128m -Xverify:none -ea -da
:com.bea... -da:javelin... -da:weblogic... -Dplatform.home=C:\bea\WEBLOG~1 -Dwls
.home=C:\bea\WEBLOG~1\server -Dwli.home=C:\bea\WEBLOG~1\integration -Dlog4j.con
figuration=file:C:\bea\WEBLOG~1\common\lib\workshopLogCfg.xml -Dweblogic.managem
ent.discover=true -Dweblogic.ProductionModeEnabled= -Dweblogic.security.SSL.ign
oreHostnameVerify=false -Dwlw.iterativeDev=true -Dwlw.testConsole=true -Dwlw.log
ErrorsToConsole=true -Dweblogic.Name=cgServer -Djava.security.policy=C:\bea\WEBL
OG~1\server\lib\weblogic.policy weblogic.Server
<Oct 30, 2005 2:33:31 PM PST> <Info> <WebLogicServer> <BEA-000377> <Starting Web
Logic Server with Java HotSpot(TM) Client VM Version 1.4.2_05-b04 from Sun Micro
systems Inc.>
<Oct 30, 2005 2:33:31 PM PST> <Info> <Configuration Management> <BEA-150016> <Th
is server is being started as the administration server.>
<Oct 30, 2005 2:33:31 PM PST> <Info> <Management> <BEA-141107> <Version: WebLogi
c Server 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647
WebLogic XMLX Module 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647
WebLogic Server 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647
WebLogic Server 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647
WebLogic Integration 8.1 SP4 Tue Nov 30 10:34:16 PST 2004 471877>
<Oct 30, 2005 2:33:32 PM PST> <Notice> <Management> <BEA-140005> <Loading domain
configuration from configuration repository at C:\bea\WEBLOG~1\samples\domains\
workshop\.\config.xml.>
<Oct 30, 2005 2:33:33 PM PST> <Notice> <Log Management> <BEA-170019> <The server
log file C:\bea\weblogic81\samples\domains\workshop\cgServer\cgServer.log is op
ened. All server side log events will be written to this file.>
<Oct 30, 2005 2:33:34 PM PST> <Notice> <Security> <BEA-090082> <Security initial
izing using security realm myrealm.>
<Oct 30, 2005 2:33:34 PM PST> <Notice> <WebLogicServer> <BEA-000327> <Starting W
ebLogic Admin Server "cgServer" for domain "workshop">
<Oct 30, 2005 2:33:38 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgJMSPool-nonXA": SQL-server rejected establ
ishment of SQL-connection. Pointbase Server may not be running on localhost at p
ort 9093.>
<Oct 30, 2005 2:33:40 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgJMSPool-nonXA": SQL-server rejected establ
ishment of SQL-connection. Pointbase Server may not be running on localhost at p
ort 9093.>
<Oct 30, 2005 2:33:42 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgJMSPool-nonXA": SQL-server rejected establ
ishment of SQL-connection. Pointbase Server may not be running on localhost at p
ort 9093.>
<Oct 30, 2005 2:33:44 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgJMSPool-nonXA": SQL-server rejected establ
ishment of SQL-connection. Pointbase Server may not be running on localhost at p
ort 9093.>
<Oct 30, 2005 2:33:46 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgJMSPool-nonXA": SQL-server rejected establ
ishment of SQL-connection. Pointbase Server may not be running on localhost at p
ort 9093.>
<Oct 30, 2005 2:33:47 PM PST> <Error> <JDBC> <BEA-001150> <Connection Pool "cgJM
SPool-nonXA" deployment failed with the following error: 0:Could not create pool
connection. The DBMS driver exception was: SQL-server rejected establishment of
SQL-connection. Pointbase Server may not be running on localhost at port 9093..
>
<Oct 30, 2005 2:33:48 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgPool": SQL-server rejected establishment o
f SQL-connection. Pointbase Server may not be running on localhost at port 9093.
>
<Oct 30, 2005 2:33:50 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgPool": SQL-server rejected establishment o
f SQL-connection. Pointbase Server may not be running on localhost at port 9093.
>
<Oct 30, 2005 2:33:52 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgPool": SQL-server rejected establishment o
f SQL-connection. Pointbase Server may not be running on localhost at port 9093.
>
<Oct 30, 2005 2:33:54 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgPool": SQL-server rejected establishment o
f SQL-connection. Pointbase Server may not be running on localhost at port 9093.
>
<Oct 30, 2005 2:33:56 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgPool": SQL-server rejected establishment o
f SQL-connection. Pointbase Server may not be running on localhost at port 9093.
>
<Oct 30, 2005 2:33:57 PM PST> <Error> <JDBC> <BEA-001150> <Connection Pool "cgPo
ol" deployment failed with the following error: 0:Could not create pool connecti
on. The DBMS driver exception was: SQL-server rejected establishment of SQL-conn
ection. Pointbase Server may not be running on localhost at port 9093..>
<Oct 30, 2005 2:33:57 PM PST> <Error> <JDBC> <BEA-001151> <Data Source "cgDataSo
urce" deployment failed with the following error: DataSource(cgDataSource;cgSamp
leDataSource) can't be created with non-existent Pool (connection or multi) (cgP
ool).>
<Oct 30, 2005 2:33:57 PM PST> <Error> <JDBC> <BEA-001151> <Data Source "cgDataSo
urce-nonXA" deployment failed with the following error: DataSource(cgDataSource-
nonXA;weblogic.jdbc.jts.ebusinessPool) can't be created with non-existent Pool (
connection or multi) (cgJMSPool-nonXA).>
<Oct 30, 2005 2:33:57 PM PST> <Alert> <JMS> <BEA-040052> <JMSServer "cgJMSServer
" store failed to open java.io.IOException: JMS JDBC store, connection pool = <c
gJMSPool-nonXA>, prefix = <weblogic>: connection pool does not exist.
java.io.IOException: JMS JDBC store, connection pool = <cgJMSPool-nonXA>, prefix
= <weblogic>: connection pool does not exist
at weblogic.jms.store.JDBCIOStream.throwIOException(JDBCIOStream.java:48
8)
at weblogic.jms.store.JDBCIOStream.checkPool(JDBCIOStream.java:1599)
at weblogic.jms.store.JDBCIOStream.open(JDBCIOStream.java:548)
at weblogic.jms.store.JMSStore.open(JMSStore.java:224)
at weblogic.jms.backend.BEStore.open(BEStore.java:262)
at weblogic.jms.backend.BEStore.start(BEStore.java:151)
at weblogic.jms.backend.BackEnd.openStores(BackEnd.java:1171)
at weblogic.jms.backend.BackEnd.resume(BackEnd.java:1290)
at weblogic.jms.JMSService.addJMSServer(JMSService.java:2260)
at weblogic.jms.JMSService.addDeployment(JMSService.java:2031)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Depl
oymentTarget.java:337)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Dep
loymentTarget.java:597)
at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeploy
ments(DeploymentTarget.java:575)
at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(
DeploymentTarget.java:241)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:754)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:733)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:509)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
60)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
28)
at weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(Rem
oteMBeanServerImpl.java:988)
at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBean
ServerImpl.java:946)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:954)
at weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanPro
xy.java:481)
at weblogic.management.configuration.ServerMBean_Stub.updateDeployments(
ServerMBean_Stub.java:7691)
at weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployment
s(SlaveDeployer.java:1304)
at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.j
ava:347)
at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resum
e(DeploymentManagerServerLifeCycleImpl.java:229)
at weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:131)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:966)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:361)
at weblogic.Server.main(Server.java:32)
>
<Oct 30, 2005 2:33:57 PM PST> <Error> <JMS> <BEA-040123> <Failed to start JMS Se
rver "cgJMSServer" due to weblogic.jms.common.JMSException: JMS can not open sto
re cgJMSStore.
weblogic.jms.common.JMSException: JMS can not open store cgJMSStore
at weblogic.jms.backend.BEStore.start(BEStore.java:163)
at weblogic.jms.backend.BackEnd.openStores(BackEnd.java:1171)
at weblogic.jms.backend.BackEnd.resume(BackEnd.java:1290)
at weblogic.jms.JMSService.addJMSServer(JMSService.java:2260)
at weblogic.jms.JMSService.addDeployment(JMSService.java:2031)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Depl
oymentTarget.java:337)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Dep
loymentTarget.java:597)
at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeploy
ments(DeploymentTarget.java:575)
at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(
DeploymentTarget.java:241)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:754)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:733)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:509)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
60)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
28)
at weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(Rem
oteMBeanServerImpl.java:988)
at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBean
ServerImpl.java:946)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:954)
at weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanPro
xy.java:481)
at weblogic.management.configuration.ServerMBean_Stub.updateDeployments(
ServerMBean_Stub.java:7691)
at weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployment
s(SlaveDeployer.java:1304)
at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.j
ava:347)
at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resum
e(DeploymentManagerServerLifeCycleImpl.java:229)
at weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:131)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:966)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:361)
at weblogic.Server.main(Server.java:32)
Caused by: java.io.IOException: JMS JDBC store, connection pool = <cgJMSPool-non
XA>, prefix = <weblogic>: connection pool does not exist
at weblogic.jms.store.JDBCIOStream.throwIOException(JDBCIOStream.java:48
8)
at weblogic.jms.store.JDBCIOStream.checkPool(JDBCIOStream.java:1599)
at weblogic.jms.store.JDBCIOStream.open(JDBCIOStream.java:548)
at weblogic.jms.store.JMSStore.open(JMSStore.java:224)
at weblogic.jms.backend.BEStore.open(BEStore.java:262)
at weblogic.jms.backend.BEStore.start(BEStore.java:151)
... 29 more
>
<Oct 30, 2005 2:33:57 PM PST> <Warning> <EJB> <BEA-010061> <The Message-Driven E
JB: CreditScoreTutorial is unable to connect to the JMS destination: tutorial.cr
edit.request.topic. The Error was:
[EJB:011010]The JMS destination with the JNDI name: tutorial.credit.request.topi
c could not be found. Please ensure that the JNDI name in the weblogic-ejb-jar.x
ml is correct, and the JMS destination has been deployed.>
<Oct 30, 2005 2:33:58 PM PST> <Warning> <EJB> <BEA-010061> <The Message-Driven E
JB: KNEX.bean.QueueTransport is unable to connect to the JMS destination: jws.qu
eue. The Error was:
[EJB:011010]The JMS destination with the JNDI name: jws.queue could not be found
. Please ensure that the JNDI name in the weblogic-ejb-jar.xml is correct, and t
he JMS destination has been deployed.>
<Oct 30, 2005 2:33:58 PM PST> <Notice> <Security> <BEA-090170> <Loading the priv
ate key stored under the alias DemoIdentity from the jks keystore file C:\bea\we
blogic81\server\lib\DemoIdentity.jks.>
<Oct 30, 2005 2:33:58 PM PST> <Notice> <Security> <BEA-090171> <Loading the iden
tity certificate stored under the alias DemoIdentity from the jks keystore file
C:\bea\weblogic81\server\lib\DemoIdentity.jks.>
<Oct 30, 2005 2:33:58 PM PST> <Notice> <Security> <BEA-090169> <Loading trusted
certificates from the jks keystore file C:\bea\weblogic81\server\lib\DemoTrust.j
ks.>
<Oct 30, 2005 2:33:58 PM PST> <Notice> <Security> <BEA-090169> <Loading trusted
certificates from the jks keystore file C:\bea\JDK142~1\jre\lib\security\cacerts
.>
<Oct 30, 2005 2:33:58 PM PST> <Notice> <WebLogicServer> <BEA-000331> <Started We
bLogic Admin Server "cgServer" for domain "workshop" running in Development Mode
>
<Oct 30, 2005 2:33:58 PM PST> <Notice> <WebLogicServer> <BEA-000360> <Server sta
rted in RUNNING mode>
<Oct 30, 2005 2:33:58 PM PST> <Warning> <WebLogicServer> <BEA-000372> <HostName:
0.0.0.0, maps to multiple IP addresses:192.168.0.1,70.34.104.139>
<Oct 30, 2005 2:33:58 PM PST> <Warning> <WebLogicServer> <BEA-000372> <HostName:
0.0.0.0, maps to multiple IP addresses:192.168.0.1,70.34.104.139>
<Oct 30, 2005 2:33:58 PM PST> <Notice> <WebLogicServer> <BEA-000355> <Thread "Li
stenThread.Default" listening on port 7001, ip address *.*>
<Oct 30, 2005 2:33:58 PM PST> <Notice> <WebLogicServer> <BEA-000355> <Thread "SS
LListenThread.Default" listening on port 7002, ip address *.*>
<Oct 30, 2005 2:34:07 PM PST> <Warning> <EJB> <BEA-010096> <The Message-Driven E
JB: CreditScoreTutorial is unable to connect to the JMS destination: tutorial.cr
edit.request.topic. Connection failed after 2 attempts. The MDB will attempt to
reconnect every 10 seconds. This log message will repeat every 600 seconds until
the condition clears.>
<Oct 30, 2005 2:34:07 PM PST> <Warning> <EJB> <BEA-010061> <The Message-Driven E
JB: CreditScoreTutorial is unable to connect to the JMS destination: tutorial.cr
edit.request.topic. The Error was:
[EJB:011010]The JMS destination with the JNDI name: tutorial.credit.request.topi
c could not be found. Please ensure that the JNDI name in the weblogic-ejb-jar.x
ml is correct, and the JMS destination has been deployed.>
<Oct 30, 2005 2:34:08 PM PST> <Warning> <EJB> <BEA-010096> <The Message-Driven E
JB: KNEX.bean.QueueTransport is unable to connect to the JMS destination: jws.qu
eue. Connection failed after 2 attempts. The MDB will attempt to reconnect every
10 seconds. This log message will repeat every 600 seconds until the condition
clears.>
<Oct 30, 2005 2:34:08 PM PST> <Warning> <EJB> <BEA-010061> <The Message-Driven E
JB: KNEX.bean.QueueTransport is unable to connect to the JMS destination: jws.qu
eue. The Error was:
[EJB:011010]The JMS destination with the JNDI name: jws.queue could not be found
. Please ensure that the JNDI name in the weblogic-ejb-jar.xml is correct, and t
he JMS destination has been deployed.>
<Oct 30, 2005 2:44:08 PM PST> <Warning> <EJB> <BEA-010096> <The Message-Driven E
JB: KNEX.bean.QueueTransport is unable to connect to the JMS destination: jws.qu
eue. Connection failed after 62 attempts. The MDB will attempt to reconnect ever
y 10 seconds. This log message will repeat every 600 seconds until the condition
clears.>
<Oct 30, 2005 2:44:08 PM PST> <Warning> <EJB> <BEA-010061> <The Message-Driven E
JB: KNEX.bean.QueueTransport is unable to connect to the JMS destination: jws.qu
eue. The Error was:
[EJB:011010]The JMS destination with the JNDI name: jws.queue could not be found
. Please ensure that the JNDI name in the weblogic-ejb-jar.xml is correct, and t
he JMS destination has been deployed.>
<Oct 30, 2005 2:44:17 PM PST> <Warning> <EJB> <BEA-010096> <The Message-Driven E
JB: CreditScoreTutorial is unable to connect to the JMS destination: tutorial.cr
edit.request.topic. Connection failed after 63 attempts. The MDB will attempt to
reconnect every 10 seconds. This log message will repeat every 600 seconds unti
l the condition clears.>
<Oct 30, 2005 2:44:17 PM PST> <Warning> <EJB> <BEA-010061> <The Message-Driven E
JB: CreditScoreTutorial is unable to connect to the JMS destination: tutorial.cr
edit.request.topic. The Error was:
[EJB:011010]The JMS destination with the JNDI name: tutorial.credit.request.topi
c could not be found. Please ensure that the JNDI name in the weblogic-ejb-jar.x
ml is correct, and the JMS destination has been deployed.>
<Oct 30, 2005 2:54:08 PM PST> <Warning> <EJB> <BEA-010096> <The Message-Driven E
JB: KNEX.bean.QueueTransport is unable to connect to the JMS destination: jws.qu
eue. Connection failed after 122 attempts. The MDB will attempt to reconnect eve
ry 10 seconds. This log message will repeat every 600 seconds until the conditio
n clears.>
<Oct 30, 2005 2:54:08 PM PST> <Warning> <EJB> <BEA-010061> <The Message-Driven E
JB: KNEX.bean.QueueTransport is unable to connect to the JMS destination: jws.qu
eue. The Error was:
[EJB:011010]The JMS destination with the JNDI name: jws.queue could not be found
. Please ensure that the JNDI name in the weblogic-ejb-jar.xml is correct, and t
he JMS destination has been deployed.>
<Oct 30, 2005 2:54:17 PM PST> <Warning> <EJB> <BEA-010096> <The Message-Driven E
JB: CreditScoreTutorial is unable to connect to the JMS destination: tutorial.cr
edit.request.topic. Connection failed after 123 attempts. The MDB will attempt t
o reconnect every 10 seconds. This log message will repeat every 600 seconds unt
il the condition clears.>
<Oct 30, 2005 2:54:17 PM PST> <Warning> <EJB> <BEA-010061> <The Message-Driven E
JB: CreditScoreTutorial is unable to connect to the JMS destination: tutorial.cr
edit.request.topic. The Error was:
[EJB:011010]The JMS destination with the JNDI name: tutorial.credit.request.topi
c could not be found. Please ensure that the JNDI name in the weblogic-ejb-jar.x
ml is correct, and the JMS destination has been deployed.>
THANK YOU for any help you can provide!These are errors/warning because of incorrect connection pool settings.Either the database parameters were not configured correctly or there were some issues with the configuration itself.
Your server did start up correctly though.
"<Server started in RUNNING mode>"
Maybe you are looking for
-
"Convert Text to Table" Size limit issue?
Alphabetize a List I've been using this well known work around for years. Select your list and in the Menu bar click Format>Table>Convert Text to Table Select one of the column's cells (1st click selects entire table, 2nd click selects individual cel
-
Trying to make object move parabolically....
Im creating a race track where an object goes around in laps.. So far, the object is moving at straight 90 degree angles when it hits sides.. Im trying, and also wondering how to make the object curve when it turns a corner instead of hitting the edg
-
Sony Bravia TC8305A series power on then off.
Hello, I have a Sony Bravia KDL series 46in TV. It powers on, the backlight shows activity as in you can see that it wants to do something, then powers itself back off then back on in a cycle.. What could the issue be? If you tell me a board please b
-
TS2917 Macbook pro retina leather case with magnets
I've bought a new expensive leather case for my new macbook pro retina display. I've had my macbook accidentally fall asleep 3 or 4 times already. So, does it mean that I have to throw away that case? Or is it okay to keep using it unless I'm keeping
-
Maximum record fetched property of block
hi friends i have a basetable block and i set the maximum record fetched property for this block to 1 but when i execute_query i see all records. can any one help me? and i set this property ---> query array size but it doesnot work also!!!! tahnks r