GETWA_NOT_ASSIGNED in EWA generation

Hi Experts,
I am facing the following dump u201CGETWA_NOT_ASSIGNED u201C, Termination occurred in the ABAP program "SAPLDSVAS_GRAPH" - in u201CSET_EXTREME_VALUES".The main program was "RDSMOP_MAIN ".
In the source code you have the termination point in line 275 of the (Include) program "LDSVAS_GRAPHACI".
Friends I am facing this issue while generating EWA report for R3 server only, Iu2019m able to generate EWA report for other servers like BI, CRM. But while creating EWA report for ERP server Iu2019m getting this dump.
Certain thing I would like to highlight. Recently we did a support pack upgrade, mine is a Solman 7.0 EHP1 system. We update the support pack up to " SPS 6 ".Before the support pack upgrade it was working fine, I was able to generate the EWA report for all my servers.
Do any body face similar kind of problem?
Responses are highly appreciable
Thanks & Regards
Dusmanta

Hi,
Implement the following notes in the same order and then check again.
[Note 1415725 - ST-SER: PI/XI EWA section 'Workload by Receiver'|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1415725]
[Note 1436867 - ST-SER: PI/XI EWA dump GET_WA_NO_ASSIGNED|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1436867]
Regards,
Varadharajan M

Similar Messages

After Upgrading the SOLMAN to SPS12 the SAP EWA generation to word fail!

Hello,

after Upgrading the SOLMAN system to SPS12 the SAP Early WatchAlert generation to word fail. We use MS Word 2002 SP3!
EarlyWatch Alert Report, EarlyWatch Alert Report with Graphics, all Service Level Reportings -
No report can generate to a word report!
the following Error message appears:

Information:
Document generation failed

After confirming the information poopup, this Error message appears:

Error: Exception occurred (program: , include: , line: 0)., Program CL_DSMOP_HTML_SERVICE_OPEN====CP, Include CL_DSMOP_HTML_SERVICE_OPEN====CM00N, Row 103 
With SPS10 all generations were successfully!
Has anybody an idea?

Thanks a lot!

Regards,
matthias isenburg

Hello,
This is a known problem in the meantime!!!
We use MS Word 2002 SP3! This Version ist too old! The Templates which the Solman want to use are now in MS Word 2003 (minimum)!
The solution is to upgrade MS Word!!!
Best Regards,
Matthias Isenburg

Manual EWA generation in SP12

Fellow Members.
The time has come to say goodbye to beloved DSWP transaction (and RDSMOP_MAIN). SAP has moved everything to workcenters. That is a good move and looks sleek.
Today I had a sudden urge to generate ad hoc EWA in SP12 manually in a good old way (creating a empty session in DSWP and then running Refresh Session in SDCCN on managed system). But to my surprise in workcenter there is no way we could do this (or atleast I did not find any options to generate ad hoc EWA in workcenter).
So any of you were successful in generating ad hoc EWA in SP12 please let me know. Or do you have any information from SAP side that this feature would not be available anymore then pls update me.
Thanks You
Vivek

Hi Vivek,
It is possible and you need to goto system monitoring workcenter for this
follow the steps in wiki
How to create an Ad Hoc EWA report in Solution Manager 7.1 - Solution Manager - SCN Wiki
this still works and i have tested in all 7.1 versions
Thanks
Prakhar

EWA For EP System

Hi All,
I want to generate EWA report for my Enterprise Portal system which is JAVA Based.
I had read the document attached in note 976054. As per this note data will be collected using SMD.
Now I want to know that from where can I start SMD? Is the any configuration require for SMD?
My current solution manager level is Solution Manager 7.0 with EHP1 with SP19. So any new patch installation is require?
All configuration will require at solman side only? No any configuration will require at Enterprise Portal side?
Please guide me how can I generate EWA?
Regards,
Nisit
Edited by: Nisit Patel on Aug 10, 2010 7:30 AM

Hi Nishit,
Install SMD server on Solution manager system which will common for all portal system which is done once.
Install SMD system on Portal system with sapinst. now a days it come automatically installed during Installation of system.
Instally Wilyintro-scope on Portal system .
All system shuold be registered successfully in your SLD of lanscape for EWA generation.
Thanks
Manas Behra

Can I reschedule Early Watch Report's generation schedule?

Dear gurus,
There is a backgroud job running in our ECC PRD system. It gathered the performance data and sent it to SAP.
SAP will generate Early Watch Report for(EWA) me every week.
Now my question is: Can I reschedule the EWA generation period in ECC PRD via SDCCN? Because I want to get Early Watch Report that contains our PRD system's healthy status from 1st June to 30ty June (the whole week).
Can I? Hope you could give me some advice.
Thank you very much!
Jason

Hi Jason,
I guess you meant "the whole month" instead of "the whole week". Unfortunately the EarlyWatch Alert report is always weekly and cannot cover an entire month. But take a look at Service Level Reporting. An SLR can be weekly or monthly and contains much of the same data as the EWA. I think it will satisfy your requirements. A good starting point is here: http://help.sap.com/saphelp_smehp1/helpdata/en/36/5ec6267ba34de08c55e3c310ebdece/frameset.htm
Good luck!
Jon

EWA report: didnt send to SAP!!! Help Please

Hi experts,
All of my servers generated EWA reports, but it did not sent to SAP. I have the checked mark to send to SAP.... It was working fine. one of my team members, he deleted all the jobs and scheduled em again.... which perticular job do I need to schedule to send to SAP? I thought this is the job that needs be schedulled >>> "SEND_SYSTEM_RELATIONSHIP_TO_SUPP". this job is working fine. Other than that, I dont understand why it didnt send to SAP?
Please help.
Thanks in advanced!!
I will post points for sure!!

Hi Afi,
Kindly note the sequence of steps to be done for EWA generation.
1. Setup of the Server, database and system in transaction SMSY.
2. Generating the RFC's for the System and ensuring that the trusted
RFC works.
3. Adding the system to a logical component and assigning the logical
component to a Solution Landscape created in DSWP.
3. Setting up of EWA from the Solution Settings from the operations
setup in DSWP.
4. Configuring the SDCC / SDCCN on the satellite system (see note Note 763561 ) and adding the Solution Manager RFC to the SDCC settings.
5. Refreshing of sessions via the SDCCN transaction on the Satellite
system. This can be automated via the Auto session Manager Report.
6. Processing of the session and sending the collected data to Solution
manager.
7. Processing the collected data in the Solution Manager System and
generating the EWA Report.
if helpful reward points are appreciated

I do not know how to avtivate sap early watch,need your help.thanks.

I have finished the installation of solution manager3.2 .Now ,I do not know how to activate early watch,I have learned the relevant notes in sap website,but I still do not know the details about how to activate early watch.who can help me? Do you have references about activating early watch or install guide. I really need your help,I am waiting your answer,and thanks.
my MSN:[email protected] my skype:Day_77

Hi,
Kindly note the sequence of steps to be done for EWA generation.
1. Setup of the Server, database and system in transaction SMSY.
2. Generating the RFC's for the System and ensuring that the trusted
RFC works.
3. Adding the system to a logical component and assigning the logical
component to a Solution Landscape created in DSWP.
3. Setting up of EWA from the Solution Settings from the operations
setup in DSWP.
4. Configuring the SDCC / SDCCN on the satellite system (see note Note 763561 ) and adding the Solution Manager RFC to the SDCC settings.
5. Refreshing of sessions via the SDCCN transaction on the Satellite
system. This can be automated via the Auto session Manager Report.
6. Processing of the session and sending the collected data to Solution
manager.
7. Processing the collected data in the Solution Manager System and
generating the EWA Report.
if helpful reward points are appreciated

Short dump while executing job SM:EXEC SERVICES for EWA alert generation

Hello All,
I'm getting short dump error while executing job SM:EXEC SERVICES for EWA alert generation.I'm using EHP1@SP22 of Sol Man.
Please find the logs
Error in the ABAP Application Program
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "RDSVASCABAP_TRANS__________073
" in include "RDSVASIABAP_TRANS__________073 " in
line 1782:
"Field "STATEMENT_SUMMARY001019" is unknown. It is neither in one of th"
"e specified tables nor defined by a "DATA" statement. "DATA" statement"
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
If anyone came across such kind of dump, please reply asap, due to this, i could not generate EWA report for R/3 system 6.04.
Thanks,
Anand.

>
Anand Tigadikar wrote:
> Thx Paul, but i already did checked this note and its not solving my issue
Dear Anand,
Did you perform a complete service definition replacement for SDCC/SDCCN as described in the note?
These are manual steps you need to perform on the system and are not code corrections.
I would suggest you perform it, if you have not, and check the SDCCN logs to review the process ran cleanly.
Note: Please make sure SDCC_OSS is functioning and a connection to SAP can be made before
deleting the service definitions.
If you have already replaced the service defintions on the Solution Manager system, then no point doing it again. However checking a note and applying it are not the same thing. So I am uncertain if you replaced the service definitions or not. The dump you are getting in SM:EXEC SERVICES suggests its due to a problem with the service definitons. The recommendation is to replace them according to the process described in SAP Note 727998. If you have not done so please do so.
If you have successfully replaced the service definitions are you still getting the same dump, or has it possibly changed?
Regards,
Paul

EWA report generation in Solution Manager 7.1 SP12

Hi Friends,
I am done with Managed System Configuration..
Now I need to generate EWA reports for the same.
But I am getting some inputs that, EWA is automatically configured in Managed System Configuration itself.
Can you guys suggest me accordingly..
Thanks & Regards,
Solman Starter

Just start the workcenter and navigate here:
Adding other systems can be done via SMSY ->
You also have to check your SDCCN settings: There must be a Maintenance Package scheduled daily which uses your SolMan system.
I suggest that you flag your RFC to SolMan as master:
(Display/Change)
(Set Master Solution Manager system)

Error in generation of EWA(Early Watch) Report

Dear All,
Plz help to find out why there is error in the generation of early watch repports and the way to resolve it .
Thanks in advance
Regards
Arpit

Hi Arpit,
Just berief us the error in detail, then only we can suggest......if your issue got resolved then i request you to close this improper message.
Regards
Nick Loy

EWA report problem

Dear Experts,
I have done with the configuration of EWA in solman 4.0 with one of the satellite system in our landscape.
i can see early watch reports are in red color and Dates for this session are overdue,when i checked the background job(SM:EXEC SERVICES) it is getting cancelled with SYNTAX_ERROR.please find the below log for the same
Job started
Step 001 started (program RDSMOPBACK_AUTOSESSIONS, variant &0000000000069, user ID CGSOLMAN)
RDSMOPBACK_AUTOSESSIONS : MemSize Begin = 1379040
Solution CGMOPZ is being edited (Operations)
Solution CGMOPZ is being edited (Setup)
Solution Development Landscape is being edited (Operations)
Solution Development Landscape is being edited (Setup)
Solution Quality Landscape is being edited (Operations)
Trying to perform session 0010000000018
ABAP/4 processor: SYNTAX_ERROR
Job cancelled.
and also find the dump log
Error analysis
    The following syntax error was found in the program
     RDSVASAEA_ROOT_____________050 :
    "INCLUDE report "/1CAGTF/IF_LOGFUNC_000393" not found"
Information on where terminated
    Termination occurred in the ABAP program "SAPLDSVAS_PROC" - in "EXECUTE".
    The main program was "RDSMOPBACK_AUTOSESSIONS ".
    In the source code you have the termination point in line 2153
    of the (Include) program "LDSVAS_PROCCD0".
    The program "SAPLDSVAS_PROC" was started as a background job.
    Job Name....... "SM:EXEC SERVICES 000000002100100"
    Job Initiator.. "CGSOLMAN"
    Job Number..... 16013500
Please let me know how to sort of this issue.
Points will be awarded without fail!!
Waiitng for your turn!!
Regards,
Laxman
Edited by: Laxman Challa on May 20, 2008 2:56 PM

Please replace the Service Definitions in your SAP Solution Manager
system as described in SAP Note 727998.
As of SAP Solution Manager 7.0 (= 4.0) Support Package Stack 15 (which
includes ST-PI 700_2005_1 SP06) you can trigger the required steps
within transaction SDCCN:
Menu Utilities -> Maintain Service Definitions ->
Select 'Delete and Replace Service Definitions -> Confirm this
selection-> Confirm that you want to delete the definitions -> Confirm
that a new task 'Service Definition Refresh' was created
Take a note of the task id -> Review the log for this task id when it
is completed. You should not see any errors for either the update
of a Service Definitions table or the generation of any re-import
include.
Reschedule SM:EXEC SERVICES and the reported dump will no longer
occur.

Dump GETWA_NOT_ASSIGNED during execution of SM:EXEC SERVICES

Hi all,
since i've installed SPS17 for SolMan 7.0 I can not process CPH and EWA data for the
availability service level reporting.
I always get the following shortdump:
GETWA_NOT_ASSIGNED - Field symbol has not yet been assigned
Termination occurred in the ABAP program "RDSVASAEC_ROOT_____________054" - in
"ACTION_109".
The main program was "RDSMOPBACK_AUTOSESSIONS ".
The problem is with the FIELD-SYMBOLS: <fieldno> TYPE ANY.
Any ideas?
Regards
Mario

Hi Mario,
I would recommend to open a customer message on SV-SMG-MON-SLR.
- Mention, that you have already replaced the service definitions.
- Open the connection and provide logon data.
(I found the hint in old customer message, but I had also doubt, that this will not solve the dump. The type of dump does not fit to the "dump caused by old service defininitions".
Best regards,
Ruediger

Configuration of EWA reports for java systems.

Hello,
I am facing a problem with configuration of EWA reports for SAP NW Portal.
I have already configured EWA for abap systems, and those are running good on weekly basis. but i have problem with configuration of reports for java systems.
So far, i have installed an SMD agent and CA on my EP-satellite system. I have also configured and SMD server on my Sollution Manager and registered the SMD agent on SMD server and installed Willy Introscope on SMD server.
I am using a central SLD which is running on different host as Solution Manager. I did all the configuration (smsy_setup, configuration of sld_data_supplier etc... )
I have also created the system in SMSY, matched the smsy with SLD and assigned Logical component to java system.
So far, so good according to manuals but when i want do define data collection in the SMD for Gargage Collection (task in scheduler) i cannot see host of my portal system.
I can see only the hosts (scheduler tasks ) of all abap system for which the EWA reports have already been generated.
Am i missing something?
Some configuration in SMD?
My solution manager is running on Sap NW 7.0, SPS16,
Sattelite system NW 7.0 EP, SPS 6 (planning to SPS 19)
Thank you for your advices!!!

Hi Suveer,
I did the configuration before. I forgot to mention it.
I found this errors in Diagnostic Setup, maybe this could be the cause of the issue.
Step BI Details
Cannot invoke CCMSBISETUP on host localhost
!! Exception : An exception occured during the execution of this function 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC'.(cause=com.sap.sup.admin.abap.rfc.exception.RfcExecutionException The function named 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC' doesn't exist!)
Exceptions
com.sap.sup.admin.abap.rfc.exception.RfcExecutionException: An exception occured during the execution of this function 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC'.
at com.sap.sup.admin.abap.rfc.function.RfcFunction.execute(RfcFunction.java:92)
at com.sap.sup.admin.setup.AbapSysRfcAdapter.setupBIConfiguration_ccmsBiSetup(AbapSysRfcAdapter.java:743)
at com.sap.sup.admin.setup.AbapSysRfcAdapter.setupBIConfiguration_ccmsBiSetup(AbapSysRfcAdapter.java:727)
at com.sap.sup.admin.setup.ManagingServices.startCcmsBiSetup(ManagingServices.java:2686)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:334)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:304)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.setupSMDServer(ConfirmationView.java:378)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.onActionSetupServer(ConfirmationView.java:211)
at com.sap.sup.admin.setup.wizard.monitoring.wdp.InternalConfirmationView.wdInvokeEventHandler(InternalConfirmationView.java:278)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: com.sap.sup.admin.abap.rfc.exception.RfcExecutionException: The function named 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC' doesn't exist!
at com.sap.sup.admin.abap.rfc.function.RfcFunction.execute(RfcFunction.java:62)
... 37 more
And also this one>>
Step RFC Details
Failed to create TCP/IP RFC on ABAP side (SM59)
!! Exception : Source system cannot be set to Unicode , error key: RFC_ERROR_SYSTEM_FAILURE
Exceptions
com.sap.aii.proxy.framework.core.BaseProxyException: Source system cannot be set to Unicode , error key: RFC_ERROR_SYSTEM_FAILURE
at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
at com.sap.sup.admin.setup.abapproxy.tcpiprfc.TcpIpRfcProxy_PortType.inst_Create_Tcpip_Rfcdest(TcpIpRfcProxy_PortType.java:16)
at com.sap.sup.admin.setup.ManagingServices.createTcpIpRFC(ManagingServices.java:663)
at com.sap.sup.admin.setup.ManagingServices.createTcpIpRFC(ManagingServices.java:637)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:300)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:304)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.setupSMDServer(ConfirmationView.java:378)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.onActionSetupServer(ConfirmationView.java:211)
at com.sap.sup.admin.setup.wizard.monitoring.wdp.InternalConfirmationView.wdInvokeEventHandler(InternalConfirmationView.java:278)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
And in the troubleshooting setup for managed systems, i can see that no initial upload was found form the SMD agent which is running on Java System.
Thanks a lot for your remarks

GETWA_NOT_ASSIGNED in production

Hi all
I am getting an error in production server but everything is working fine in development.
Runtime Errors GETWA_NOT_ASSIGNED
Date and Time 03.11.2007 15:31:28
|Short text
| Field symbol has not yet been assigned.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_CRM_BSP_STRUCTUREEDIT======CP" had to be
 terminated because it has come across a statement that unfortunately cannot be executed.

I did the following
1. created a ZView name ZCRM_ACT1
2. Copied the application CRMD_BUS2000126 to the View
3. Tab Page group ACT_ODC1_5 Modified in the View
4. Field Groups ACT_DETAIL_50_PARTNER,
 ACT_DETAIL_50_CLASS and
 ACT_DETAIL_50_DATES modified.
5. Field Group Layout Generated for ACT_OVERVIEW_50
6. Tool Bar Groups ACT_HEADER and ACT_OIC_50 Modified.
7. Defined an interface text and assigned it to the field label.
Moved the transport requests in the following sequence.
1. Workbench request of ZView
2. Customization Request of ZView
3. Customization Request of Tab Page Group
4. Customization Request of Tool Bar Group
5. Customization Request of Field Group
6. Customization Request of Field group Layout generation
7. Renaming the field label.
and all the above customizations are reflecting in the production.
But all the other Standard views are working, only my view is getting the error.
Tool bar group is working but when I click on new activity only this error occuring
Please help me in this issue
Regards
Ravi

Solved
The problem is with some enhancement done using easy enhancement workbench. That field group is also getting added in the layout and the enhancement was not moved to production.
Regards
Ravi

EWA Alert

Dear Experts,
I am trying to send an EWA locally from my ECC6.0 Quality system.
I have already configured Satellite sytem and Service desk in my solution manager.
Procedure I am following:
In my Quality system I went to Tcode SDCCN. Then I have activated it via Utilities-->.activate
Automatically two task has been created: Task name: Maintenance Package and Service Preperation check.
Then I went to Task>Create>Request session data-->then I select periodic(Early Watch Alert)
After the background jobs finishes again went to Task>Create>Refresh session.
My question is:
1. Is that the right steps I am following.
a. Maintenance Package
b. Request session data
c. Refresh session
2. What will be the Target RFC Destination for all the three task(if correct).
I am confused about the Target RFC's for the three task.
Please suggest something.
Regards,

Hello,
http://help.sap.com/saphelp_sm32/helpdata/EN/3b/6dcca09dd24250a0873fef3122de5b/content.htm should help you in this regard.
I believe there is a tutorial on the market place for the generation.Please check service.sap.com/solutionmanager.
If you want the data to be sent to the solman, use the solman rfc.( i think the solman back rfc.Plz check)
thanks,
Prasanna kulkarni
Edited by: Prasanna K on Jun 30, 2009 3:09 PM
Edited by: Prasanna K on Jun 30, 2009 3:13 PM

GETWA_NOT_ASSIGNED in EWA generation

Similar Messages

Maybe you are looking for