GF 3.1.1 Admin Console Freeze -- A long-running process has been detected

I installed Glassfish 3.1.1 on both sparc and intel servers for solaris 10 & 11 platform. All my servers have the same symptom when I access the admin console. The console freezed and pop-up a message "A long-running process has been detected". There is nothing I can do at this point. I've tried accessing from different PC with different browsers (IE, Firefox 5, Chrome and Safari), but nothing is working including clearing the cache. Also, tried uninstall and install again (with and without updatetool) many times. Any idea how do I stop the popup message? Am I the only one has this problem? I'm using JDK 1.7 (GF 3.1.1 support JAVA 7). I need help!!!!!
Thanks,
- Johnny

The only fix I know of for this issue is to reboot the host.
If there is another fix someone please let me know as I have users who run into this often.
Thanks
Bonnie.Partridge

Similar Messages

A Cross-site request forgery (CSRF) has been detected. Task=com.bea.consol

On the BEA admin console and tryiing to install an ear from a remote location that is fairly large, we're seeing the following error:
<A Cross-site request forgery (CSRF) has been detected. Task=com.bea.console.actions.app.install.Flow.uploadApp address=*.**.***.*** user=weblogic>
The address contains an actual IP address.
If we copy the same ear over to the server box and install, it works fine. If we remove some jars from the ear to decrease its size, it works fine.
We are running a Weblogic 10.3.5 server. The ear that fails is 276MB. We can successfully install a 246MB ear. So the problem must arise somewhere between 250MB and 275MB.
Has anyone seen this? Is this a known limitation for installing remote ear's?
Any information is appreciated.

A phase listener comes to mind. Check out this useful article:
http://balusc.blogspot.com/2006/09/debug-jsf-lifecycle.html

Can not connect to Admin Console FMS 3.5 running separate Apache Server

Hi All! I have installed the FMS 3.5 Server on a separate IP from our main Apache Server: The server is running Redhat Linux 2.6.18-128.1.10.el5
FMS 3.5 running on ***.***.**.138 using ports 1935, 8080 (Admin Server using port 1111)
Apache 2 running on ***.***.**.139 using port 80, 443. (several sites setup on this IP)
However, when accessing the fms_adminConsole.htm in the root directory of one of the domains on ***.***.**.139, all login attempts fail. I am connecting to localhost and using the assigned user and password set up in fms.ini. Using either IP fails as well. The FMS server is set up to listen to all hosts as no specific IPs were set.
/var/log/messages show that FMS and the Admin Server are up an running and listening:
Jul 7 12:15:37 228215-web1 Service[28196]: Server starting...
Jul 7 12:15:37 228215-web1 Service[28196]: Server started (/opt/adobe/fms/conf/Server.xml).
Jul 7 12:15:37 228215-web1 Adaptor[28216]: Listener started ( _defaultRoot__edge1 ) : localhost:19350/v4
Jul 7 12:15:38 228215-web1 Adaptor[28216]: Listener started ( _defaultRoot__edge1 ) : 1935/v4
Jul 7 12:15:38 228215-web1 Adaptor[28216]: Listener started ( _defaultRoot__edge1 ) : 8080/v4
Jul 7 12:16:20 228215-web1 Service[28480]: Server starting...
Jul 7 12:16:20 228215-web1 Adaptor[28480]: Listener started ( FCSAdminIpcProtocol ) : localhost:11110/v4
Jul 7 12:16:21 228215-web1 Adaptor[28480]: Listener started ( FCSAdminAdaptor ) : 1111/v4
Jul 7 12:16:22 228215-web1 Service[28480]: Server started (./conf/Server.xml).
All other settings for FMS are default. This is my first time setting up FMS as a fresh install on a new unknown server and I am at a loss as to what settings to check or which files I may need to modify to get it to connect properly. It is a managed server is hosted by rackspace.com if that makes any difference.
Sorry if I have not provided enough info... let me know what I missed and I will supply it.

Sorry for the confusion! *I* am the one really confused. But to answer your question (I hope), the webpage is on the same physical server as the FMS server, but I am using an outside network (I am not on the local server network) to browse the webpages.
Both IPs fail when trying to reach:
http://***.***.**.138:1111
http://***.***.**.139:1111
Does that mean the ports are blocked? The /var/log/messages shows:
Jul 7 13:20:37 228215-web1 Service[29862]: Server starting...
Jul 7 13:20:37 228215-web1 Service[29862]: Server started (/opt/adobe/fms/conf/Server.xml).
Jul 7 13:20:37 228215-web1 Adaptor[29882]: Listener started ( _defaultRoot__edge1 ) : localhost:19350/v4
Jul 7 13:20:38 228215-web1 Adaptor[29882]: Listener started ( _defaultRoot__edge1 ) : 1935/v4
Jul 7 13:20:38 228215-web1 Adaptor[29882]: Listener started ( _defaultRoot__edge1 ) : 8080/v4
Jul 7 13:20:51 228215-web1 Service[30144]: Server starting...
Jul 7 13:20:51 228215-web1 Adaptor[30144]: Listener started ( FCSAdminIpcProtocol ) : localhost:11110/v4
Jul 7 13:20:52 228215-web1 Adaptor[30144]: Listener started ( FCSAdminAdaptor ) : 1111/v4
Jul 7 13:20:53 228215-web1 Service[30144]: Server started (./conf/Server.xml).

I want to delete my admin user from this laptop as it has been sold. how do I do this?

I have sold my laptop and want to delete my information from it. How do I go about doing this?

I would reload the OS from install disks, and pass on thse install disks (as is required anyway) as Leopard disks are harder to come by these days.
That way you can reformat with zero-out option (removes anything you do not want seen by others) and "starts fresh". If you shutdown the system right before the final restart of the install process, it will be ready for them to make their onw account with their own name right in front of them.

Admin Console 9.3.1.3

Hi,
I am facing a strange issue lately with EAS console via Web launcher. It has been working fine before and nothing has changed in the env. The Console freezes immediately after the first activity (any activity, like editing Sub variables or opening Outline, expanding Essbase servers etc) on the first session of the first user, after restarting the Web app server and/or Hyperion modules restart. It allows me to so only one activity per restart.
Essbase and planning are up, as I can access the data via Planning forms & Excel add-in and I can also run MAXL scripts.
I have tested this a number of times, it freezes after the first activity after the restart
Did anyone experience similar issue before?
Checked all start-up logs, all modules are successfully up.
I would also like to try with a local install of EAS console. Is there any place I can download 9.3.1.3 Admin console install files? I have a 9.3.1 client, which cannot connect to 9.3.1.3 server because of version incompatibility.
Greatly appreciate your thoughts. Thank You.
Thanks,
Ethan.

Hi Ethan,
This issue may be related to Java version. The EAS web launcher uses Java/JRE from the system that your trying the URL.
Whats the version of JRE on the system? Is it supported for 9.3.1 ? (Are you sure the JRE has not been upgraded by chance?)
Alternatively, if you want to download installers for 9.3.1, you will have to create Media SR from Oracle Support.
Can check this on MOS : Requesting Physical Shipment or Download URL for Software Media (Doc ID 1071023.1)
Thanks,
Santy.

Weblogic 10 doesn't start through admin console

Hi,
While starting a managed server on WebLogic 10.3 through the admin console I get the below error. However when starting the same managed server with a script I can successfully start it up.
<Sep 30, 2010 10:31:52 AM EEST> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://10.123.456.78:7001.>
<Sep 30, 2010 10:31:52 AM EEST> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
<Sep 30, 2010 10:31:52 AM EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
Sep 30, 2010 10:31:55 AM EEST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: java.lang.AssertionError: Could not obtain the localhost address. The most likely cause is an error in the network configuration of this machine.
java.lang.AssertionError: Could not obtain the localhost address. The most likely cause is an error in the network configuration of this machine.
     at weblogic.server.channels.AddressUtils$AddressMaker.getLocalHost(AddressUtils.java:40)
     at weblogic.server.channels.AddressUtils$AddressMaker.<clinit>(AddressUtils.java:35)
     at weblogic.server.channels.AddressUtils.getIPAny(AddressUtils.java:105)
     at weblogic.protocol.configuration.ChannelHelper.checkConsistency(ChannelHelper.java:60)
     at weblogic.server.channels.ChannelService.start(ChannelService.java:197)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
java.net.UnknownHostException: myServer: myServer
     at java.net.InetAddress.getLocalHost(InetAddress.java:1353)
     at weblogic.server.channels.AddressUtils$AddressMaker.getLocalHost(AddressUtils.java:38)
     at weblogic.server.channels.AddressUtils$AddressMaker.<clinit>(AddressUtils.java:35)
     at weblogic.server.channels.AddressUtils.getIPAny(AddressUtils.java:105)
     at weblogic.protocol.configuration.ChannelHelper.checkConsistency(ChannelHelper.java:60)
     at weblogic.server.channels.ChannelService.start(ChannelService.java:197)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
The environment had been up and running for many months, have done many successfull restarts occasionally. But after an ungraceful shutdown (database connection was down and managed server wouldn't shutdown through admin console) of the managed server & admin server, the startup through admin console stopped working. No configurations had been modified and we have two other systems working with similar configurations.
The log is stating that "<The admin server could not be reached at http://10.123.456.78:7001.>" but it actually is listening at that IP and port and I can connect to it with other means. I'm able to ping the hostname, IP, localhost etc... and network connection shouldn't be an issue even though the log states so.
Does anyone have any ideas what is broken? Thanks for any help in advance!

Hi,
With script I meant the startManagedWebLogic.cmd script (on Windows). The managed server is running on the same machine as the admin server.
The hosts file has also been checked, it has the same content as two other environments which are working fine. But anyway we tried adding the IP & hostname there, but it didn't fix the issue. Nothing is wrong with the DNS either.
I'm also able to ping the address:port, with the command you gave I get the following result:
Sending 1 ping of 100 bytes.
RTT = ~0 milliseconds, or ~0 milliseconds/packet
When I'm trying to restart the managed server through admin console (on my laptop), I can see on the server side that there is a connection to the IP:port of admin server from my laptop's IP:
C:\>netstat -an | grep 7001
TCP 10.123.456.78:7001 0.0.0.0:0 LISTENING
TCP 10.123.456.78:7001 10.164.51.33:3965 ESTABLISHED
I again want to say that no changes have been done to any configurations in the environment. It was working fine before the "ungraceful" shutdown, where the connection to DB (that the managed server uses) was down and neither the managed or admin server would shutdown through admin console, but were shutdown by closing the cmd prompt window(used to start admin server) and java.exe task from taskmgr (managed server).

Admin console producing hs_pid errors

Just recently I've discovered that the admin-serv/config directory is producing lots of hs_pid errors
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : 11 occurred at PC=0xFEEBB384
Function=PR_Write+0x0
Library=/opt/directory/lib/libnspr4.so
Cannot obtain thread information
Dynamic libraries:
0x10000 ns-httpd
0xff380000 /opt/directory/bin/base/jre/lib/sparc/server/libjsig.so
0xff360000 /opt/directory/bin/https/lib/libsmartheap_smp.so
0xff340000 /opt/directory/bin/https/lib/liblibdbm.so
0xff180000 /opt/directory/bin/https/lib/libns-httpd40.so
0xff150000 /opt/directory/bin/https/lib/liblibsi18n.so
0xff130000 /opt/directory/bin/https/lib/libgetprop.so
0xff110000 /opt/directory/bin/https/lib/libnsprwrap.so
0xff0c0000 /opt/directory/lib/libldap50.so
0xff0a0000 /opt/directory/lib/libprldap50.so
0xff070000 /opt/directory/lib/libsasl.so
0xfef00000 /opt/directory/bin/https/lib/libxerces-c.so
etc........
and the console no longer allows you to login.
Stopping the admin-serv and removing the error files and then starting admin-serv backup is a temporary fix but I cannot find any reason for why this has started to happen.
The time they occur and the logs in the directory give me nothing to go on.
The errors just continue looping until the partition fills up.
Is this a bug with the Software, has anyone else seen this?
Regards
James

It may not be a bug, I found a post says:
http://forums.java.sun.com/thread.jspa?threadID=629508&messageID=3618384
===
Re: How to detect JVM crash
Author: zhmur Posts: 110 Registered: 04.05.05
May 27, 2005 12:48 AM (reply 4 of 5)
Starting from 1.5.0 jvm automatilly dumps crash info to file named "hs_pid*". But 1.4.2 doesn't have this feature. You can try to setup vprintf hook in VMInitArgs.
===
Gary

Admin Console Integration for Users in a Custom Realm

We are implementing a custom realm and are having troubles getting our Users to
show up in the User list.
Our user class extends weblogic.security.acl.User, and is forced to use the default
CTOR because our data access layer requires it.
Unfortunately, getName() returns null if the User(String) constructor is not used.
Furthermore, Identity::setName() is final, so it seems as though there is no
way to set the user's name after construction.
I am correct in this?
If so, any thoughts on whether it is worth going down the path of making my user
class implement Principal instead of extending weblogic.security.acl.User? I
would be forced to try to guess at what methods in User are required to integrate
with the admin console, I believe. I have not been able to find any documentation
that specifies what api/contract the console uses when it attempts to display
user, role, acl information for a custom realm.
Any advice would be greatly appreciated.
-chris

My comments mixed with your text
"Chris Goodacre" <[email protected]> wrote:
>
We are implementing a custom realm and are having troubles getting our
Users to
show up in the User list.
Our user class extends weblogic.security.acl.User, and is forced to use
the default
CTOR because our data access layer requires it.
Unfortunately, getName() returns null if the User(String) constructor
is not used.Yes.
Furthermore, Identity::setName() is final, so it seems as though there
is no
way to set the user's name after construction.
I am correct in this?Yes. Changing a user's name on a constructed user object is like mutating that
user to another user - a security hole. It isn't allowed.
>
If so, any thoughts on whether it is worth going down the path of making
my user
class implement Principal instead of extending weblogic.security.acl.User?I'd try to stay with extending weblogic.security.acl.User, but also implement
weblogic.security.acl.CredentialChanger, so you can change passwords through the
console (otherwise you get NullPointerExceptions).
You really want to get around not being able to supply a user name as part of
the ctor.
I
would be forced to try to guess at what methods in User are required
to integrate
with the admin console, I believe. I have not been able to find any
documentation
that specifies what api/contract the console uses when it attempts to
display
user, role, acl information for a custom realm.
Any advice would be greatly appreciated.
-chris1. Your realm should extend AbstractManageableRealm and implement DebuggableRealm
if you want to integrate with the console.
2. The only contract is to implement all the methods!
3. Check the type of the user and group objects being passed to your realm - if
they're not your user and group type, reject the call.
4. The documentation is indeed terrible, and often wrong. The examples shipped
are incomplete (the RBDMS realm shipped has approx 1/3 of the functionality).
You'll get good with jad.
Should all be better in 7.0 with JAAS. The realm interfaces is a dog.
Good luck,
simon.

Third party access to Business Catalyst admin console: dashboard freezing

Hi,
My client can't access his admin console in Business Catalyst to edit the website we've built for him. He's using both a Mac G5 2.1gh power pc OS 10.4.11 and a Mac Laptop 2.2gh intel core duo 10.6.8. He follows this link http://www.slowhome.co.uk/AdminConsoleXT/#dashboard but the screen just freezes. I've resent passwords, fiddled with admin persmissons but nothing has freed up access yet. Any suggestions, clues or answers please? We're using Adobe Muse to build and Business Catalyst to manage. His browser meets the system requirements.
Cristina

What browser is he using? The user account for the other admin at the site seems to be properly set up with all permissions assigned. I'm unable to reproduce the problem either. If the problem persists, can you ask the user to try another browser or clear cookies/temp data/cache for the current browser and re-try. If that doesn't help, please try logging into the admin using a different network connection.
You could also try creating another admin account for the user and test it out. This would also help isolating the issue to being account specific. If that doesn't work either, please reach out directly to BC live chat support through http://helpx.adobe.com/contact.html?product=business-catalyst.
Thanks,
Vinayak

Error in creating a new user in j2ee 14 admin console

Hi,
I am getting the following error while trying to create a new user using the j2ee 1.4 admin console.:
A "com.sun.enterprise.tools.guiframework.exception.FrameworkError" was caught. The message from the exception: "Unable to get View for ViewDescriptor 'fileUsers'"
The root cause is "java.lang.ArrayIndexOutOfBoundsException: 0"
Plz proide me with solutions
Regads,
Tanmoy

This problem wil happen only if you've created a user with an empty group id, and this issue is fixed for FCS .
You have two workarounds to use adminGUI for managing users:
1. Use CLI, and create a group id to this user, then you can use adminGUI.
2. Other option is remove the empty group id user from domain.xml, and then you can come back to adminGUI to create the user with some group id. I prefer the 1st option.

How do I create admin console users with full access to configuration and the directory in every instance?

I want to be able to create directory user ID for the iPlanet administrators. They should be able to access the admin console and all the instances created. They should be able to configure each instance and directory. I was able tocreate Admin Server Administrators but they were only able to modify the directory(tab) and not the configurations(tab). Any help would be greatly appreciated!
Thanks.
Keith

Hi Keith,
In o=netscaperoot, edit the static group called cn=Configuration Administrators, ou=Groups, ou=TopologyManagement, o=NetscapeRoot - this group contains the admins peer to your config admin. Since the console is quirky and doesn't let you add in users not in netscaperoot, just click advanced and put in the full dn of whoever you want in by hand, e.g., uid=scarter, ou=people, dc=mydomain,dc=com as a static member. then rebind to the console with the full dn and passwd, and away you go :)
james

Read Only Admin Console

Hey,
Has anyone found a way to add further restrictions to users logged in to the Admin Console based on membership to a Group? Restricting them to specific Menu Items is taken care of, but I'd like to be able to prevent them from editing anything in the Manage Users section.
Ideally they would be able to view the user details page and user resources, but not be able to change them in any way. At the same time I'd like to filter out certain user fields from displaying (for instance, the person's SSN).
Is there any way to do this outside of front-end customization? This is using OIM 9.1.0.0.

If I understood your qurey correctly... try changing the property of the user filed in FormMetaData.xml to readonly. By this you just display the fileds but are not editable.

Adobe muse - how to upload images in photo gallery in the admin console?

Question from Adobe Muse beginner - I can't figure out how images can be uploaded in a slideshow/photo gallery in the admin console? I can edit or delete images but not upload additional images?

Hi,
May I know which admin console are you talking about.
You are talking about Business Catalyst or Adobe Muse?
Please provide the steps to access the admin console via Muse.
Regards,
Gaurav Aggarwal

Hi Team Admin console not connecting

Hi Team,
I am using sccm2007 sp2 in one of the primary. I am unable to connect admin console getting attached error. Actually one of my team met did the repository rename.. Is it cause issue? if yes. how can i back the track

Previously i able to connect the sccm primary console. now i am not. I checked permission vise everything good..
So that i capture my adminui.log ..
one of my team met done the repository rename in primary server. My question that's y i am not able to connect the sccm server. when i tried to connect in WMI root\sms_sitecode getting error.. can you understand now? or not
There is no getting back the WMI namespace if it was renamed or delete. It is not supported to do this without contact CSS directly for support.
You have two options, Attempt to clean up the mess of renaming the WMI. This might take a while due to the complexity of WMI and the unknowns of what was exactly done.
Call CSS and tell them what exact you have done and get them to work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Can't access to Portal Admin Console.

Hi all,
I'm working with WLP 10.2. I've created the ear-file (using maven) and deployed it on server (with Unix-system). The current application works well.
My current task is a creation portal in streaming mode. Unfortunately I can't access to Portal Admin console for resolving task. I always retrieve "Error 404 (Not found)".
As I know the admin-tools.war is responsible for Portal Admin Console. I've checked admin-tools.war is running on server (with status "Active").
I'm using the next path for running Portal Admin Console: {serverhost:port}/{context root of admin-tools}/portal.portal.
Maybe, Should I set up(correct) application.xml or weblogic.xml?
Please let me know if you have any ideas.
Thanks,
Yuriy

I think your URL is wrong, try with the following...
http://{server:port}/{name_your_ear}Admin/portal.portal
name_your_ear= The name of your Enterprise Application.
For example,
http://localhost:7001/DemosEarAdmin/portal.portal
I hope this helps

GF 3.1.1 Admin Console Freeze -- A long-running process has been detected

Similar Messages

Maybe you are looking for