GF FX5200

Okay. I'm having a problem with a program that came with my FX5200... Hope you can help me here or direct me to who can. It's the media center deluxe II. When I install the program it goes well for a while then has a self registration error that says this:
Following files did not self register:
1. CL\Program Files\MSI\Media Center Deluxe II\WINDEx.dll
The specified procedure could not be found
And when the program launches it says there was a script error and I have to close it. I downloaded all the newest drivers hoping that would help... but no. Service Pack 4 too. I'm using Windows 2K.
Thanks,
Mike

hey thanks! that fixed that problem... but now I am having a new one. Any idea why it is poor quality audio when I play DVDS? This doesn't happen when I use a different DVD player... has background static and skips. Also. Can I change the resolution? Or am I stuck with 1024x768?

Similar Messages

MSI StarForce FX5200-VT128

Well, before starting, let me say that I only have a few hairs left on my head, I pulled them all out in the last 36 hours. I'm all out of options and you seem my last hope.
-- skip if you don't want details --
You see, I got this card, with a box that said "FX5200 VT-128". Box looked nice, it had an embeded tuner that wasn't ATI (I thew it out the window, it it responsible for me wearing a wigg), remote control (RF), and a rather new nVIDIA FX chipset that I heard good things about. Besides, I know nVIDIA drivers to be a one-click install and work flawlessly (at least they did so far)
So I got this card into my W2k SP4 box, DX8.1, installed the nVIDIA CD, personal cinema setup. Then the drivers from the MSI disk. Rebooted, and the option to install video capture drivers appeared. Did so and Intervideo WinDVR was displaying TV, stereo sound and all. Yey! Remote controlled TV.
Then the storm came. I got this CATV modem and the installation died at some point. New W2k, SP4, fresh install. Installed the software, drivers, got a BSOD. Mrrr. Went on and installed the web version of the drivers. No dice. Upgraded to DX9. Nope. And so on and so forth, I've been up 36 hours now and I'm turning a redish tint.
IT DOES NOT WORK ANY MORE!
-- end of skip --
It worked before. Nothing changed. Same card, same TV, same software, same OS. Tried 3 versions of drivers, all work fine on the video card, but TV tuner does not work, as follows:
44.02 (on CD) - Remote control does not work (There is an FAQ on the site about this, says upgrade driver but link is broken, needs "&kind=10" at the end). WinDVR hangs, so do all other WDM tuners.
53.04 (the one in the FAQ) - remote control still dies, as opposed to the FAQ. WinDVR hangs
56.64 - bad - remote control dies(against what MSI says), windvr does not tune
I currently have v44.02 on video card with capture drivers v2.2, still does not tune. By this I mean that TV apps start, display window that is actually TV, except that it's some kind of start-of-band (distorted, mis-tuned TV station, probably beginning of VHF-L). If I try to autoscan, tune to something, change input, switch pal/secam/ntsc, NOTHING HAPPENS. It's as if the driver got read-only. WinDVR either crashes or scans at about 8 channels/second (used to do around one/s)
You might want to know what else do I want except complaining
Well, please, PLEASE, if anyone has Windows 2000 SP4 and this card (that lists as Personal Cinema FX 5200, as opposed to the box, that states FX5200-VT128), tell me what configuration you have.
Tell me what DX version, what video card driver version (Device manager>Display Adapters > Properties > Driver) and what Capture Drivers you own (check the same for nVIDIA WDM Tuner). And patches, order of install, anything I haven't tried.
I have GIGS of software to put in this installation and I can't start if I need a fresh install.
Also, as a bottom note, I read most of the forum, sticky posts, googled, nothing shows. I'm a system admin and a coder, in a word, a professional, so don't waste time on details if you don't feel like it. Just point me in the right direction.
W2k Pro SP4
DX9.0
Personal Cinema FX5200 (VT128)
512 RAM
Intel 2.8G HT (HT disabled) - It worked with HT enabled, too.
Intel PERL 68something mobo

Quote
La mine merge, dar merge ca dracu! (ma refer la tuner, ca restul merge, mai putin telecomanda pentru ca mi-au vandut placa cu IR Receiver si Telecomanda RF, basca un un disc cu soft schimbat!! )
NVARemote fails at software level, but the hardware works (so what?). It is a known bug that NVRemote does not work with 44.03 drivers. Well now it's known that it does not work with others either.
Quote
tunerul merge dar prinde de cate 2-3 ori acelasi post, dintre care numai o data acceptabil (dar asta s-ar putea sa fie si problema cablului),
Hint: visit Germany - cable, Romania is poorly configured (if you read help, only Romania and China use PAL_D, which is outrageous)
Quote
captura de pe camera video merge dar in timp ce inregistrez ceva "crapa" softul cu mesaj windows de eroare!.
Mine worked, it worked just fine... I swear it worked with 44.03 and capture. But now I have too many attempts at the river and MSI install disk no longer shows the option to install capture drivers.
By the way, installing WDM Tuner (NVTUNEP.SYS) reboots my NT5. HInts?
Quote
Tocmai sunt in sapaturi. Te tin la curent. Daca afli ceva da-mi si mie un mail, te rog!
O sa o fac. Am postat in engleza, poate mai citeste cineva. Eu am mail Ndi at Ndi punct ro.

Driver probs or duff FX5200 ???

Hi got some more problems with this card so much that I’ve had to take it out of the PC and put a Nvidia Geforce2 MX400 which is working with no probs.
Back to the problem the PC seems to be below is a message I’ve sent to MSI tech help.
I have a MSI FX5200-VTD128 video card installed in the MSI KT6 Delta-FISR motherboard, running at 2800+ Processor. I have installed all the latest drivers and also tried some earlier drivers for the card but the system is very unstable re-booting or hanging from the error reports I seem to of traced the errors back to the Graphics card. Below is a copy of one of the error reports I have retrieved from c:\windows\logfile\watchdog.
// Watchdog Event Log File
LogType: Watchdog
Created: 2004-04-24 10:48:32
TimeZone: 0 - GMT Standard Time
WindowsVersion: XP
EventType: 0xEA - Thread Stuck in Device Driver
// The driver for the display device got stuck in an infinite loop. This
// usually indicates a problem with the device itself or with the device
// driver programming the hardware incorrectly. Please check with your
// display device vendor for any driver updates.
EaRecovery: 1
ShutdownCount: 60
Shutdown: 0
EventCount: 5
BreakCount: 5
BugcheckTriggered: 1
DebuggerNotPresent: 1
DriverName: nv4_disp
EventFlag: 1
DeviceClass: Display
DeviceDescription: MSI MS-StarForce GeForce FX 5200 (NVIDIA GeForce FX 5200)
HardwareID: PCI\VEN_10DE&DEV_0322&SUBSYS_91901462&REV_A1
Manufacturer: NVIDIA
DriverFixedFileInfo: FEEF04BD 00010000 0006000E 000A161F 0006000E 000A161F 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
DriverCompanyName: NVIDIA Corporation
DriverFileDescription: NVIDIA Compatible Windows 2000 Display driver, Version 56.63
DriverFileVersion: 6.14.10.5663
DriverInternalName: nv4_disp.dll
DriverLegalCopyright: (C) NVIDIA Corporation. All rights reserved.
DriverOriginalFilename: nv4_disp.dll
DriverProductName: NVIDIA Compatible Windows 2000 Display driver, Version 56.63
DriverProductVersion: 6.14.10.5663
This leads me to think there is a problem with the card as I get the same report with 3 different drivers “for the card the one that came with the card NVIDIA’s latest driver & the latest driver off the MSI site.
I have also noticed on system boot when the information about the graphics card is displayed there is no information.
Rob

OK thanks for the reply what would be a good PSU to go with my system setup as I’d like to sort out this problem. I did read somewhere that Q-tech weren’t that good.

Problem with FX5200 it hangs the computer!

Hi every one.
i have a problem with my FX5200 T-128, it hangs my computer.
My system is
Moderboard: AK75-ec from dfi.com
Cpu: Amd athlon 1300Mhz
memory: 512 sdram
Some time the FX5200 works good, but many times it hangs when i am trying to play some games, some times it take few days and some time it hangs and hangs the system but after few mins it working again.
i have checked everything Volts, drivers is up to date, upgrade moderboard bios, and everything i have tryid to reinstall xp pro but nothing helps.
i have tryind to test it in other computer with other mainboards to but same there.
any one can help me ?
Regard PFtelecom

i have Nvidias newest driver installed, it hangs when it try to load the games.
what more details do you need me to give ?
and the cpu was a duron 1300mhz not athlon.
memory 2 256mb Sdram pc133.
operative system: win xp pro with sp2 before sp1 but same it hangs.
i have tryid to reset all in bios and make the right settings there to but nothing.
i have tryid to update bios on moderboard, and for the grafic card i already have newest bios update, i have tryid everything now :(
Regard Pftelecom

GeForce FX5200 Overclocking

I've recently got a GeForce FX5200 DV128 8X, it has no active cooling, just a big heatsink over the GPU and the RAM modules. Is there a way to overclock this videocard to make it faster than my GeForce 4 TI4200?

I haven't yet heard of anyone frying a fx5200. The thing is, those cards have really slow memory, so I figure by inching up the 3d clock speed you'll notice screen corruption or temporary freezes due to the slow memory before the card gets close to the point of no return. I suppose the best thing to do is google around for overclocking success stories of FX5200 owners, like this one.
Tony.

Watch TV with a FX5200 VTD128

HI
I want to know if I can watch TV with a VGA Card FX5200 VTD128. If so, How can I do it?
Thanks

Hi there,
I really know what u want to do, so take a look at this post of mine, it may help u.
https://forum-en.msi.com/index.php?threadid=38078&sid=

NVIDIA: Dual monitor question (geforce FX5200)

Hi all:
I've been using my geforce FX5200 nvidia card single monitor, just a CRT plugged into the VGA port. I had two CRTs and used a VGA->DVI adapter to attempt to get the second monitor to show (the card has a DVI and a VGA). I was never able to get the second screen to work that way, I don't know if the adapter was bad or the wrong one, but nonetheless it didn't work. I finally got a "DVI monitor." What's the easiest way to get this second monitor to work?

They should both be picked up on the nvidia-settings tool?
In theory yes, but in practice there was a problem (or possibly a "feature") on some nvidia cards (or maybe a limitation in the driver) which I also experienced on FX5500 where you couldn't use certain pipes in combination. For example using VGA+TV-Out was not possible so you would have to get a vga-to-dvi adapter and use DVI+TV-Out, which was possible. Since your first try with two CRT monitors failed it might be that your can't use VGA+DVI in combination.
Edit: unfortunately it was so long ago that I don't have any resources on this. But a quick search now brought me to another example of this
http://forums.nvidia.com/index.php?showtopic=7530
Last edited by anrxc (2009-08-24 19:44:19)

FIFA2003 don't run on FX5200 T128 ???

I have just purchased a FX5200 T-128. I have this runnig on a AMD 2600 with 512 Mb.
But my Fifa 2003 doesn't run. I can reach the introduction movie and the menu, but after setting all the match modes when the game is loading the program is shuted down and leave me to the desk.
Can some one help me with the configurations?????
Chucky

Chucky,
My crystal ball is still in the shop for repairs and without it, I cannot quite make out the hardware in your comp. Please list your Hardware, OS and specs on your Power Supply.
Take Care,
Richard

Dual monitor failure! (FX5200)

Well, 2 days ago I connected a second CRT monitor to my MSI NVidia FX5200 VTD128 card via the addapter given with the card.
It was working ok, though the refresh rates were noticeably slower on both monitors when both monitors were active.
Then I started getting little flickers, even though there was nothing going on, which was a little strange...but I figured it was ok.
So I was working with powerpoint, Macromedia Flash MX, Windows Media Player, etc. and I started having some problems, especially with Powerpoint. I'll use powerpoint to explain what happened: While previewing my presentation the 2nd (older) monitor was where the presentation was being displayed. It usually didn't take long for the screen to flicker a bit, and change the vertical and horizontal size of the display, to something that was just not right. I could reset it back to the orizinal resolution or v/h sync by going into settings and changing the resolution.
Well, then it happened again, but this time the entire image was lost! Now I can not get an image to that monitor while in windows...works during startup though. Please help.

Sorry, I really had to leave earlier.
I got the two monitors to work together again, but this time there were some limitations, and it eventually led to the same end as before.
As far as I can tell it is a windows problem or a video card problem, not a power supply or motherboard issue. I should have said that earlier. I believe it to be a video card problem, which is leading to a windows problem.
So as I said I have the FX5200 VTD128 card, running on a 4x AGP slot with NVidia drivers (not MSI drivers as these do not work on my system). My case temperature is fairly constant at approx. 81 F, and I don't know the temp of the video card.
The first time I had a problem I was using the DualView option, where both monitors are separate pretty much. After a few hours of working nicely the monitor started having so problems...it would blink an come back with a picture that was very narrow and extremely tall (both more than what could be fixed with the monitor controls). Also the colour was dull and dark. Eventually after fixing this problem a few times by changing the resolution to reset the monitor, the computer crashed. When I restarted windows the second monitor remained black while in windows (though I still see all the start up stuff on it).
So today since I couldn't get the Dual View option to work I used the option that spreads the image over both monitors. Exact same thing happened a few hours after use.
Since I had restarted my computer over this period of time, I am pretty sure it is not a memory thing. I'm guessing it is a heat thing. I have a feeling the fan on the video card is not working like it is supposed to without the MSI drivers. If this is the case, MSI should be responsible for informing buyers about this problem.
Since I was using different programs both times, I'm pretty sure it is not related to what programs were running. And since the monitor was working no problem earlier, I don't think it has anything to do with the hardware in my computer, though I tried to provide some info earlier...though I do believe there was enough info there for a somewhat educated guess as to what my problem could have been.
I have a feeling this will have to go to MSI support to get any type of answer, but hopefully someone else has a good idea as to what it is and what can be done about it.
Thanks
PS.
Richard, I believe the 4 wheels would be the equivelent of me saying I had a video card....the h/v sync thing would be like saying the car is making a specific noise. Welcome to the life of a mechanic. I appreciate help, but please refrain from the sarcasm.

DVI problems wif FX5200

Hi,
My Fx5200 does not output DVI. Anyone have suggestions as to what i can do to fix this problem

It either of the DVI-I connection that is being short due to the power failure I supposed... maybe another VGA with DVI-I connector can be placed in to test this out.

FX5200 LE Drivers for Mac OS X

-----------------------
Hello I need to know if card FX5200 HIM 128 is compatible with mac os x? if he is asi I need drivers, they can help porfavor. me.

Quote from: harnack on 01-February-06, 21:42:00
Sorry.!! I do not speak English
I want to know if card FX5200 LE is compatible with MAC OS X 10.4 ???
thanks
nVidia does not have MAC drivers.
So "NO" is the short answer.
However, there might be some help here http://macvidia.plusmediamusic.com/
There does seem to be MAC users with this card, but driver support is something you would have to research.
Google is your friend

Complete FX5200-T128 failure?

I've just tried installing an FX5200-T128 into a PC266 motherboard (using XP1600+ processor).
The driver install was fine but the end result now is that when I boot I have about two seconds of 640x480 then the signal stops (screen goes blank and says "no signal input").
I have absolutely no idea of how to proceed - the machine still works fine when booting from the old PCI card (which I removed before starting the install - the machine won't boot with both in place) or the built in VGA slot.
I've tried setting the PC's BIOS to using PCI with an IRQ, PCI without and IRQ and just using the "built in AGP" option all with the same result.
Any ideas very welcome.
Thanks

balance,
Have you try to insert your AGP Card to other system ?
maybe is the AGP Card problem.
Regards - Porsche -

Geforce FX5200 Drivers

I have just reinstalled my FX5200 but my cd drive has chewed the driver cd.
I downloaded the Fx compatible driver from here, problem now is, when I try to play games there is a double vision image and the game appears to be flickering.
To be perfectly honest I don`t have a clue where to start to try and correct the problem, or for that matter if it`s a driver problem or just a tweak job.
Any help would be appreciated.
Thank`s. Tom.
ASRock K7VM2
AMD Athlon XP 2400+,
128DDR, 266.
DirectX9b,
win98se.

Hi Richard.
I downloaded driver 45.23 from nvidia and also had a twiddle with the antialiasing and anisotropic sliders in the nvidia sub menu "quality and performance". Both of the settings where at default ie zero, I changed them both to 4x. That got rid of the double vision but there is a slight problem with outdoor textures(IGI 2). Looks like you are walking with huge boards on your feet!
I have noticed that I cannot change some of the graphic settings within the game configuration, maybe a re-install can cure that. Can you advise what settings to choose re the antialiasing and anisotropic? my mobo supports AGP 4X.
Thank`s again. Tom.

FX5200-TD128 Crashing System

Straight to the point, then...
I built a system for a client approx 2 months ago and since that time, intermittently, the system will freeze, screen will go blank, then restart, Scandisk, "Error Report" window. Configuration is as follows...
P4 2.8 GHz CPU
MSI 6728 NEO2-LS MBB
512 MB Kinston KVR400 DDR RAM
MSI FX5200-TD128 Video w/ 53.03 Drivers
Western Digital 80 GB HDD
LiteOn 52x32x52 CD-RW
SB Live! 5.1 Sound
Raidmax Scorpion Case with 420W Power Supply (other PSU specs - now posted later in thread)
2x case fans
Logitech Webcam
Windows XP Home SP1(upgraded from ME - FAT32)
Customer sent the error report and received a reply back that it was possibly video driver related, so last night we downloaded and installed the latest drivers from nVidia, but problem persists. It doesn't seem to happen with any particular program or game... sometimes with Counterstrike, other times with Internet Explorer
My next thought is to try converting to NTFS. My thinking is that maybe the problem is somehow related to the fact that it was a Windows ME upgrade and not a clean XP install.
Any help from the experts would be appreciated.
Rick

Computermechanic…….
We knew…. sooner or later that someone would try telling us that there
420 watt PSU was adequate, but in reality was inadequate. We hope this
explanation will help you to discover why your PSU is so underpowered
and or inadequate!
You said your PSU is rated @ 420 watts @ 100%, correct!
Here are the specs you gave, correct!
3.3v x 26A = 85.8 Watts @ 100%
5v x 32A = 160 Watts @ 100%
12v x 13A = 156 Watts @ 100%
We come up with 401.8 Watts Total @100%, not 420 Watts !…
PSU are often very deceiving ! All PSU are Not created equal !
Even our really old Enermax EG365P-VE 350 Watt PSU has more
watts than your 420 watt PSU!
Here are the specs:
3.3 x 32A = 105.6 Watts @ 100%
5v x 32A = 160 Watts @ 100%
12v x peak 20A = 240 watts @ 100 %
Total watts = 505 watts, correct!..Wrong!. 505 Watts @ 70% = 353.5 Watts,
that’s why it’s called a 350 watt PSU!...
Now will take your 401.8 Watts @ 70% = 281.26 Watts, You have a 282
watt PSU ! Remember again, PSU are not created equal!...
You said: “your power requirement is only 349 watts” looks like you’re a bit
weak on those precious watts, like 67 of them! Ya think! Welcome to the
real world !....
PSU… are Not designed to run efficiently @ 100% !…
PSU.. are designed to run efficiently @ 30% to70% with 50% being optimal!..
You said: “13A on the 12v rail gives 156 max watts, more than twice the required
75 needed for an FX card”. The FX card is not the only component that requires
12volts, some of the amps, and lets not forget, which equals those precious watts,
you also have to consider the HD, CDRW, SoundBlaster Live 5.1, 2 case fans,
floppy drive, MB, CPU fan, PSU fans, NB fan, etc, etc. All these components
could easily used over 100 watts, Maybe more! Maybe less ! Plus the 75 watt
FX card, to easily total more than 175 watts! Maybe more! Maybe less !
So, if you take the 156 watts from the 12v rail and its running @ 30% you get
46.8 W, now if you take that 156 watts @ 70% you get 109 W, but now, taking
that 156 watts running @ the optimal 50% you only get 78Watts!..Understand!
Everyone here, at our Overclockers club, can’t even believe that your rig would
boot up and go into Windows, for one minute or two or three or four or five or
six or even seven!.. Without crashing, lockups or BSOD.
Most signs and symptoms of a faulty or inadequate PSU, are often or random
reboots, BSOD, lockups, poor performance, crashing, etc, etc.
If you’re a system builder, or even if your not, we suggest that you and your
techs at your supply co., read this post written by clarkkent57 on “Choosing
The Right Power Supply” [https://forum-en.msi.com/index.php?threadid=31880]
and hopefully you and your staff will understand, what we are trying to say,
your PSU is the issue here! “Its inadequate”!!!!!!
The H2O Guru
If You Build The Circuit, The Electrons Will Come!
Enermax 550 v1.2 EG651P-VE PSU
+3.3V=36A / +5V=36A / +12V=36A
+5V & +3.3v = 200Watts
nVidia MB Drivers v3.13
nVidia VGA Drivers v53.03

Updated nVidia GeForce FX5200 U drivers

Does anyone knows where can I find any updated drivers for my iMac G5 64Mb nVidia FX5200 U video card? I checked the nVidia website, and they don't have drivers for Mac.
Specifically, the current Mac drivers don't support the OpenGL 2.0 Extensions completely (such as texture compression).
I've later learned that these updated drivers are released with every OS X update, when is the next update (10.4.3) due?
Does anybody know how can I request such drivers to Apple?
Thanks a lot and I appreciate all your answers!

I recently upgraded to Yosemite on my mid 2009 MBP and now I have maximum resolution of 1080p - so i suspect its the nvidia Graphics card that needs essential updates. Also after extensive search Im starting to get the feeling Apple have cut us off ... no surprises there.

GF FX5200

Similar Messages

Maybe you are looking for