GF3 Ti200 TV-Out Problem?

I have a GF3 ti200 on Win XP with a Philips TV. I was wondering how I can output my monitor onto my TV. I connected the S-Video cable from my tv to pc, and went to display properties...device selection, but all I get is Analog Device but not the TV option. I was reading some of the threads and saw people talking about needing special drivers and programs, but I don't know how to output to the tv. What do I do???? Please help me!!!!!!!

sound like a driver problem. I have msi 8850 ti 200 and have to use the drivers that came with it for tv to work.
one hard drive (me) uses these drivers, my xp hard drive uses 28.32 drivers. what kind of card do you have? are you using the drivers that came with it? I no its frustrating, try tweakers asylum site forum, I got some good tips form a person that goes by spacedriver good luck!

Similar Messages

GF3-TI200/TV out won't autodetect

I've got an annoying problem... the NVidia drivers refuse to detect the TV connected to my TV-out on my MSI GF3-TI200. I click autodetect, and it won't see the TV, and so all the options are disabled.
I tried TVTool, which worked great, until I hit the 15min limit! ;(
Is there some trick to getting the TV enabled, or is there an alternative to TVTool (I don't care about all the odds and ends, just copy my desktop to the TV!)?

sound like a driver problem. I have msi 8850 ti 200 and have to use the drivers that came with it for tv to work.
one hard drive (me) uses these drivers, my xp hard drive uses 28.32 drivers. what kind of card do you have? are you using the drivers that came with it? I no its frustrating, try tweakers asylum site forum, I got some good tips form a person that goes by spacedriver good luck!

Problems with VIA KX133 + GF3 Ti200

My system crashes after installing via 4in1 drivers (i've tried 4.28, 4.35, 4.43) runing 2D or 3D applications.
When starting any 3dmark2001 test it crashes. Without via 4in1 i can run 3dmark2001 without problems but the results are extremely low.
OS Win98
MB Biostar M7MKB (via KX133 chipset)
CPU Athlon 650 MHz (slot A)
MS-8851 GF3 Ti200 64Mb DDR
RAM 2x128 Mb Kingston PC133
ATX 300W
I mention that i didn't encountered anyproblems before installing the videocard, on my older RivaTNT2.
Any sugestions?
++++++(i've also posted this inother forums so...)
No irq conflict before or after installing 4in1. And the same happens under windows XP. I also tried 4in1 4.20 wich came with my mainboard. I also tried detonator 21.83 , 23.11 and 29.42 under Windows 98. No iam really out of ideeas. In bios the only options regarding AGP card are AGP memory (set to 64) and video bios shadow, so there's nothingto do there either. What can i try next?
+++++++
I've installed clean win98, then detonator 29.42 then modem and directx 8.1 (also tried 81.b). Then i made a backup of this state on another disk, wich i am reverting to after each unsuccesful try. So there is no driver mix-up. And no, there is no conflict before or after 4in1 installation. Also the system hangs apparently randomly in 2d apps. (but everytime i start MSOutlook ??!) and always in 3Dmark2001 at the begining. So, it functions ok but slow without 4in1, and crashes afterwards with 5 different versions of it.... My guess is ther might be a problem with the mainboard AGP voltage in4x or something (the 3D card runs ok on kt133 chipset with via 4in1 4.43)

Thanx,
I'm trying that now but the only option in bios is AGP 4x Mode (on/off). Is there any program able to switch between modes while running ?

Gf3 ti200 Pro ´TD Dualview

Pls. help,
I have this card, msi gf3 ti200 Td/Tv out 64mb
I am trying to get dualview (to extend to a second monitor) but I can't ,
I can get both monitors to show the same output but not extend the view,
Someone know,
Thanks

The GF3 doesn't support it.

Random resets with a kt3 ultra and a MSI GF3 ti200 in 3d games

Im having random resets with a kt3 ultra and a MSI GF3 ti200 in 3d games; namely Mafia and Bf1942. Ive tried new drivers for the video card, checked the cpu temp, and bios settings. Any ideas on how to fix it or is their a compatibility problem with the mobo and the video card?

I found my 6380 v2.0 mobo liked 1 brand of ram more than other.I only run crucial,kingston or muskin(micron chips)ram.Put all bios settings to defaults & try only 1 stick(1 brand) of ram at a time.I also found my gf3 ti 200 & 500 liked certain versions of drivers over others.It would crash on some.Try original cd install drivers that came w/ vid :D card.Try running 3d mark 2k1 bencmarks to test all drivers & ram.

Kt3 ultra/ gf3 ti200 random reset with 3d games

Im having random resets with a kt3 ultra and a MSI GF3 ti200, with 3d games; namely Mafia and Bf1942. Ive tried new drivers for the video card, checked the cpu temp, and bios settings. Any ideas on how to fix it or is their a compatibility problem with the mobo and the video card?

I found my 6380 v2.0 mobo liked 1 brand of ram more than other.I only run crucial,kingston or muskin(micron chips)ram.Put all bios settings to defaults & try only 1 stick(1 brand) of ram at a time.I also found my gf3 ti 200 & 500 liked certain versions of drivers over others.It would crash on some.Try original cd install drivers that came w/ vid :D card.Try running 3d mark 2k1 bencmarks to test all drivers & ram.

Time out problem in BPS

BPS friends,
We have a planning function to copy Versions based with some filters. The copy function takes 5 hours and times out after that. The function is reaching max buffer size as recommended by SAP so we cant increase the buffer size anymore.
We are on BW-BPS 3.5.
How can I solve this time out problem? Please respond to me.

Hi Pat,
How many record did you copy ??
Could you restrict the copy in not 1 package ??
Package per package ...
I suggest you ..
e.g. you have restriction by a 0CALMONTH / something ..
Then,
You can copy e.g. for January to March, then March to August, etc.
You can automate it by planning sequence.
Hopefully it can help you a lot.
Regards,
Niel.
thanks for the points you choose to assign.

AirTunes with AirportExpress cut or drop out problems - my solution...

I buyed 2 of the Airport Extreme one month ago (Firmware 6.3, Itunes 7.1.1), never got them working fine, till yesterday...
I have A Zyxel ADSL WLAN Router Switch. WPA-PSK as I wanted a secure Network. Both of the AX were connected with static IPs. WLAN was always working fine, but I had many cut outs with airtunes. I wanted a solution with lossles streaming audio with the possibility to connect my Receiver digitally. That's why I bought my first Apple hardware, as I was always told, Apple=Plug'n play. Very frustrating!
I tried other switches, Routers, WLAN adapters and cards, nothing worked. Airfoil does not support multiple speakers yet, so it's useless for me.
In the FAQ of the Airtunes, Apple mentioned to use lower security, as some Computers probably do not have enough power to stream music flawlessly. But my Computers really do have enough power! I think the AX does not have enough power to do that. So I created another wireless network with one of my AX. I set the security to WEP-40bit key and joined this new Network with my other AX. Not the best solution, as I'm now connected to the Internet or to the AX to use Airtunes. Cables could fix that problem, but then I could use a wired system instead...
I use Channel 11 for the AX WLAN (the only clean channel in my area), Multicast to 11, only G mode for Wireless and a 5 characters WEP-40 key and no WDS. Seems to work at the moment.
I hope this will help others with the cut or drop out problem. If you have a working AirTunes system, please post your setup. Mostly I'm interested in a Setup with working WPA...

Thanks, I hope I can help others with this annoying problem...
Sorry, I forgot to write about the RF Interference. Belive me, I spent hours and hours searching for a solution in the Internet and every checkbox the Admin utility offered me to try out... I'm working as a system engineer, and supporting computer systems since the early 90ties, so I'd say I have a bit knowledge about all the networking, WLAN, Audio... In school we had the Apple Mac I with the 12" monochrome monitor and appletalk for networking quite funny!
But back to the RF interference: At the moment I activated it on both AX I own. I have a microwave, wireless phone and I'm living in a Area with many WLAN access points. I can choose between 6 networks!
I'm the only one with a network higher than channel 6, so this area is clean at least.
As my AirTunes do work at the moment, I'm not going to try if I could also deactivate it.
Next step is to try if I can connect the AX Router to the internet. A connection to my ADSL router should do that, but up to now I had very strange behavior when plugging in a ethernet cable to the AX. If this will work, it will be my final solution, at the moment I only see it as a workaround...

TV OUT Problem this is how I solved.

Well, first of all I cannot guarantee if this will work for all people with tv out problems. TV with PC I think will always be a BIG headache .
How I did fix my TV OUT problem. Since I live here in Brazil, people have a problem with the system that is Pal-m. But this is easy to set up, since you just have the screen working on your TV.
The first thing that I did is to remove completely the most recent NVDIA drive (not the one made for MSI) that is 30.82. I also removed the WDM driver. Since Im using XP I didnt have to reboot 30 times just 20, , yes 20 reboot times to see if everything was all right, it took me about 1,5 hour of work.
The second thing was that I started to install the driver that came with my MSI Card (Geforce4 MX-460 TV OUT). The version was 27.50. The TV out problem was gone. I got a really nice image from the screen.
Than It came the must boring part. ;( I tested all nvidia drives from 27.50 to 30.82. Look the results I got concerning just the nview situation(dual monitors):
Nvidia 28.32. work with nview.
nvidia win-xp-2k-2835 work with nview.
nvidia win-xp-2k-2880 doesnt work with nview.
nvidia win-xp-2k-2890 doesnt work with nview.
nvidia win-xp-2k-2911 doesnt work with nview. Not all parts from the driver was updated, someone belongs to 28.90.
nvidia win-xp-2k-2920 doesnt work with nview.
nvidia win-xp-2k-2942 doesnt work with nview.
nvidia win-xp-2k-2960 doesnt work with nview.
nvidia win-xp-2k-2980 doesnt work with nview.
nvidia Win2k-xp-29.90 doesnt work with nview.
nvidia W2K_XP_V29.90 doesnt work with nview
nvidia Win2k-xp-3020 doesnt work with nview
nvidia Win2k-xp-3030 doesnt work with nview.
nvidia Win2k-xp-3082 doesnt work with nview.
I got all this drivers from a really nice site: 3dchipset .
Of course most of these are beta drivers and due to my limitation knowledge, I dont know why the nview display stopped to work at version 28.32.
And the last. The driver 28.90 driver did a really fatal crash on my PC when I was using my web camera and the nview together. It just shut down my PC, at once. X(
That all folks

Yes, that's how iMessage should work. Try this. Sign out of Messages on both devices. Sign back in on your phone and wait until it activates. Go to Settings>Messages>Send & Receive. Make sure Start New Conversations From is set to our mobile number. Then sign in on your iPad using the same Apple ID as you use on your phone. Once it activates, verify the settings. I've got iMessage syncing across my iPhone, iPad and MBA. Every once in a while, there's a glitch but rarely.
Best of luck.

The Video Out Problem...Fixed?

I know Wikipedia can be edited by virtually anyone with membership and an opinion, but I had to know.
It said that an itunes update 1.0.2 fixed the video out problem...does that mean that videos can now be connected to a TV and play on the TV? They fixed that?
I am still ever in the market for the nano, just waiting until the right ammount of money to purchase one. Thanks

I think it is currently working according to this knowledgebase article: http://docs.info.apple.com/article.html?artnum=300233
That is, for the new Nano, you can use the older iPod Universal Dock (ie the normal one that has been available for a couple of years) together with an iPod composite video cable or an SVideo cable (ie all currently-available stuff you may have already bought for a previous-series video iPod), OR you can use the brand new "Apple Universal Dock" with the brand new Apple Composite AV Cable or with the (new) Apple Component AV Cable, OR you can use one of those brand new Apple AV Cables directly with the Nano (without the new Apple Universal Dock).
What you cannot do is connect an old video cable or accessory, which was expecting to get composite video from the RCA/audio jack on the Nano, because it looks like (on the new Nano and the Classic) the audio out jack is now just for audio out and video is only available via the dock connector on the iPod.
ted.h.

SB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!

JSB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!, I have this sound card connected?(optical OUT) ?to my home?theater system's digital IN ?through the recommended /8in. optical miniplug-to-optical SPDIF cable. Theater system is set correctly to Digital-In mode. I have no sound!
The cable is a Velocity Toslink-to-Optical Mini Plug digital cable. I don't see any settings in the Creative Console Launcher. The notebook is a Dell XPS M730 (Vista 32).
I have a PS3, DirecTV, and the SB Xtreme Audio Notebook cable on a hub switch that connects to the system's?one Optical IN. The PS3 and DirecTV sound perfect!
The sound card works fine with standard PC speakers. I'm at a loss as?to what to try next. I set this whole system up myself, so I'm pretty good at working out the kinks, except this one!
Karen

OK. I just went to Control Panel - Sound - Playback - Digital Output Device (SB Xtreme Audio Notebook) - Properties - Advanced. I experimented with different sample rates and bit depths. Clicked the test button and lo and behold - sound from the HTS! I've tried iTunes, PowerDVD (configured to digital output) and YouTube - no sound! Am I missing something really obvious?
HA! Just backed out to Playback and selected Digital Output Device (SPDIF) and set as Default. Sound is emunating from HTS! Well, that mystery is solved! Who knew.
Thanks anyway! Any comments or advice will still be appreciated.

IPod Nano Grey Out Problem in iTunes??

I purchased my iPod Shuffle last year. I installed iTunes in my Window PC and purchased music via the music store.
A month ago, I purchased a iPod Nano, I added the iPod Nano to iTunes. iTunes will update my iPod Nano automatically when I connect it to my computer.
However, all the songs in my iPod Nano menu in iTunes appear 'grey out'. I can't do anything like delete, play them etc??
Can anybody advise me how to solve this 'grey out' problem?
Thanks,
Jacky

Welcome to Apple Discussions!
If you update automatically, the songs are grayed out, because the songs should be on your computer.
To delete songs, you can uncheck the songs/podcasts you don't want on your iPod in iTunes. Then connect your iPod to the computer. When it appears in iTunes, go to edit-->preferences. Click the iPod tab, then the music tab under that. Check "Only Update Checked Songs" and click OK. Only checked songs will be put onto the iPod.
See this for more ideas/tips...
Deleting songs or playlists from your iPod
To be able to play songs on the iPod through the computer, delete songs only on the iPod (without having to check and uncheck), and to have songs not grayed out, you would have to manually update. Songs would no longer automatically update onto the iPod. You would have to drag new songs that you want on your iPod onto it (through iTunes)...
Managing Your Songs Manually
btabz

Are you ever going to fix the "You've been signed out" problem?

I've gone through forums and your trouble shooting page and I've found a lot of angry customers over thus Creative Cloud "You've been signed out" problem. Fortunately for me, I'm not a customer. I installed it so I could download a trial or premiere with the intention to buy, but now I don't need the trial because this is issue has made up my mind. But I am still curious if you're ever going to fix it?

This is a user forum please open a problem report over at http://feedback.photoshop.com/photoshop_family/

I have Photoshop CS purchased many years ago for a LOT of money. Other day went to use it, got msg. "computer configuration changed, need to re-activate". Tried that for days, didn't work. Cannot call ANYONE to find out problem. Am not very computer l

I have Photoshop CS, purchased many years ago for a LOT of money. Other day went to use it, got msg. "computer configuration changed, need to re-activate. Tried that for days, didn't work. Cannot call ANYONE to find out problem. Am not very computer literate, so don't understand what that means. LOVE the CS program and know how to use it, so don't want to have to learn something new. Don't know what to do. Went to all the big name stores and no one can tell me anything, like what happened to CS or what is replacing it that is the same as CS. CAN SOMEONE PLEASE HELP!!!

jd49034389 wrote:
down further there is a Photoshop CS2, do I just do that one?
Yep. That's the one. Make sure to use the supplied key on the download page, not your old one.
Good luck.
--OB

Error out problems with measuring frequency VI

I am having some error out problems with measure frequency VI. The instructions is change error out from indicator to control but does not work. Anyone can help? The VI is attached
Attachments:
Measure Frequency VI error.vi ‏27 KB

This VI does not have an error out. Obviously, you replaced a subVI that did have an error out with this one, otherwise you would not have been able to create this wire.
Simply remove the wire or save the subVI with another name then modify it to have the error out that you are looking for.
Hope that this helps,
Bob
Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
DISTek Integration, Inc. - NI Alliance Member
mailto:[email protected]

GF3 Ti200 TV-Out Problem?

Similar Messages

Maybe you are looking for