GF3-TI200/TV out won't autodetect

I've got an annoying problem... the NVidia drivers refuse to detect the TV connected to my TV-out on my MSI GF3-TI200. I click autodetect, and it won't see the TV, and so all the options are disabled.
I tried TVTool, which worked great, until I hit the 15min limit! ;(
Is there some trick to getting the TV enabled, or is there an alternative to TVTool (I don't care about all the odds and ends, just copy my desktop to the TV!)?

sound like a driver problem. I have msi 8850 ti 200 and have to use the drivers that came with it for tv to work.
one hard drive (me) uses these drivers, my xp hard drive uses 28.32 drivers. what kind of card do you have? are you using the drivers that came with it? I no its frustrating, try tweakers asylum site forum, I got some good tips form a person that goes by spacedriver good luck!

Similar Messages

GF3 Ti200 TV-Out Problem?

I have a GF3 ti200 on Win XP with a Philips TV. I was wondering how I can output my monitor onto my TV. I connected the S-Video cable from my tv to pc, and went to display properties...device selection, but all I get is Analog Device but not the TV option. I was reading some of the threads and saw people talking about needing special drivers and programs, but I don't know how to output to the tv. What do I do???? Please help me!!!!!!!

sound like a driver problem. I have msi 8850 ti 200 and have to use the drivers that came with it for tv to work.
one hard drive (me) uses these drivers, my xp hard drive uses 28.32 drivers. what kind of card do you have? are you using the drivers that came with it? I no its frustrating, try tweakers asylum site forum, I got some good tips form a person that goes by spacedriver good luck!

Gf3 ti200 Pro ´TD Dualview

Pls. help,
I have this card, msi gf3 ti200 Td/Tv out 64mb
I am trying to get dualview (to extend to a second monitor) but I can't ,
I can get both monitors to show the same output but not extend the view,
Someone know,
Thanks

The GF3 doesn't support it.

Problems with VIA KX133 + GF3 Ti200

My system crashes after installing via 4in1 drivers (i've tried 4.28, 4.35, 4.43) runing 2D or 3D applications.
When starting any 3dmark2001 test it crashes. Without via 4in1 i can run 3dmark2001 without problems but the results are extremely low.
OS Win98
MB Biostar M7MKB (via KX133 chipset)
CPU Athlon 650 MHz (slot A)
MS-8851 GF3 Ti200 64Mb DDR
RAM 2x128 Mb Kingston PC133
ATX 300W
I mention that i didn't encountered anyproblems before installing the videocard, on my older RivaTNT2.
Any sugestions?
++++++(i've also posted this inother forums so...)
No irq conflict before or after installing 4in1. And the same happens under windows XP. I also tried 4in1 4.20 wich came with my mainboard. I also tried detonator 21.83 , 23.11 and 29.42 under Windows 98. No iam really out of ideeas. In bios the only options regarding AGP card are AGP memory (set to 64) and video bios shadow, so there's nothingto do there either. What can i try next?
+++++++
I've installed clean win98, then detonator 29.42 then modem and directx 8.1 (also tried 81.b). Then i made a backup of this state on another disk, wich i am reverting to after each unsuccesful try. So there is no driver mix-up. And no, there is no conflict before or after 4in1 installation. Also the system hangs apparently randomly in 2d apps. (but everytime i start MSOutlook ??!) and always in 3Dmark2001 at the begining. So, it functions ok but slow without 4in1, and crashes afterwards with 5 different versions of it.... My guess is ther might be a problem with the mainboard AGP voltage in4x or something (the 3D card runs ok on kt133 chipset with via 4in1 4.43)

Thanx,
I'm trying that now but the only option in bios is AGP 4x Mode (on/off). Is there any program able to switch between modes while running ?

My 2002 iMac G4 went down during a power out. won't restart. tried PMU button. still won't start. fan tries for 2 sec, but nothing

my 2002 iMac G4 went down during a power out. won't restart. tried PMU button. still won't start. fan tries for 2 sec, but nothing

Sometimes, a replacement 1/2AA 3.6v Lithium PRAM battery is needed
to get these back into running form again, because these are one-way
and without a good battery, settings are lost or easily corrupted. And this
can contribute to a failure on startup. But that is a troubleshooting measure.
There could be another issue, although these batteries are only good for a
few years at best. A power outage can revoke any remainder of life out of it.
The take-apart is tedious and detail oriented; to include new thermal paste
and some special tools, good instructions, and some skills also help. An
ifixit.com repair guide may help; as would an original Apple Service guide.
Not sure if other good online guides or youtube video are available.
If the power supply is bad, the test ports near the PMU button are where
to check; with multi-meter. Also power supplies may develop issues with
bad capacitors. They have been said to be repairable.
Here's an older site with a take-apart from some time ago.
http://www.xlr8yourmac.com/systems/imac_g4/imacg4_takeapart.html
This also would be a good time to consider, if battery is all that's failed, to
upgrade the internal RAM chip, or upgrade the hard disk drive, etc.
Good luck & happy computing!
edited

Random resets with a kt3 ultra and a MSI GF3 ti200 in 3d games

Im having random resets with a kt3 ultra and a MSI GF3 ti200 in 3d games; namely Mafia and Bf1942. Ive tried new drivers for the video card, checked the cpu temp, and bios settings. Any ideas on how to fix it or is their a compatibility problem with the mobo and the video card?

I found my 6380 v2.0 mobo liked 1 brand of ram more than other.I only run crucial,kingston or muskin(micron chips)ram.Put all bios settings to defaults & try only 1 stick(1 brand) of ram at a time.I also found my gf3 ti 200 & 500 liked certain versions of drivers over others.It would crash on some.Try original cd install drivers that came w/ vid :D card.Try running 3d mark 2k1 bencmarks to test all drivers & ram.

Kt3 ultra/ gf3 ti200 random reset with 3d games

Im having random resets with a kt3 ultra and a MSI GF3 ti200, with 3d games; namely Mafia and Bf1942. Ive tried new drivers for the video card, checked the cpu temp, and bios settings. Any ideas on how to fix it or is their a compatibility problem with the mobo and the video card?

I found my 6380 v2.0 mobo liked 1 brand of ram more than other.I only run crucial,kingston or muskin(micron chips)ram.Put all bios settings to defaults & try only 1 stick(1 brand) of ram at a time.I also found my gf3 ti 200 & 500 liked certain versions of drivers over others.It would crash on some.Try original cd install drivers that came w/ vid :D card.Try running 3d mark 2k1 bencmarks to test all drivers & ram.

Enable Cuda on 7.2.2 - Greyed out won't let me select

I just moved over to the CC from CS6. I have been doing EVERYTHING on the forums and for some reason it still won't load.
My specs:
OSX 10.9.2
GeForce GT 650M
16gb RAM
2.3 GHz INtel Core i7
Premiere 7.2.2
Cuda Driver: 5.5.28 (but I've tried most recent, back dated versions, none have worked)
I have added the driver to the .txt files for GPU and OpenCL in the Applications folder. I've opened terminal and my found my card listed in all text files. I've started, restarted computer - nothing has worked. It is still greyed out. But if I open CS6 - it works great.
Please help.

I have your card already listed in the cuda_supported_cards.txt file for Pr CC, as it should be (see link below)
Where specifically did you sense it needed to be added?
I'm also wondering... have you run any diagnostics to make sure your card is A-Ok?
And how much memory does it have? At least 1GB is required today.
http://www.adobe.com/products/premiere/tech-specs.html

MSI GF3 Ti200 for $79.00 at Computer Geeks

Computer Geeks has the MS-8851 GF3Ti200 for $79.00. That is a good price for an extra Video Card to spice up an aging comuter.
MSI GeForce 3 Ti200 64MB DDR 4x AGP Video Card w/S-Video Out
Night,
Richard

Hi Osnavi,
Thanks for your reply
I haven't had any problems with this RAM in the past - can you get RAM problems with a BIOS change? I will try to get hold of some other RAM to try as this would be easy to test...I'll let you know how it goes
Cheers,
magree

Text fade in/out won't work if a light makes shadows

I found that text won't actually use a fade in/out behavior if you are using a light that projects shadows.
Now, that's an interesting thing. I used to notice with drop-shadows in Mo3, the shadow would show up and the fade would be sort of weird since you could see the shadow under while it faded in. It wasn't a very pretty fade since it got dark and muddy first.
So, now, it just won't let you do it.
Bug or user error?

Adjusting the opacity of a text layer forces it's rasterization. This essentially gives it the properties of a 2D layer which aren't affected by lights.
In order for you to get a cast shadow AND a fade in/out, you must first flatten the text layer. This can be done by selecting the Flatten button in the Text tab of the inspector. Or else you can drop the text into a 3D group and flatten the group from the Group tab.
Andy

Geforce Ti200 TV out

Dear all,
I have a problem when i connect My pc to my TV, here is the Story:
I have windows 98 and windows xp installed when i try to run windows 98 to my tv the screen is all garbled (like when you set your resolution higher than you monitor can handle), so i decided to switch to the XP which did not have the driver installed although it showed colors and it worked simply fine and it played all the vcd's normally, however i need to play dvd's and the default driver that came with win xp won't let it work, so i installed the driver that came with my vga V21.xx and the problem is that i can have a very good picture but ONLY IN BLACK AND WHITE. ;( . itried installing nvidia's 40.xx driver but that did not solve the problem.
Help please.

Check out tvtool (tvtool.com) - it seems to solve a lot of tv out problems, plus there is a healthy user forum there.
Cheers

Error 201; CC desktop app constantly logged out, won't redownload

Running CC on Windows 7, 64bit. Have run into the "Please log in/You are now logged out" loop before, so uninstalled the CC desktop app, renamed the OOBE file to OOBE_OLD, and attempted to re-download and re-install the CC app. This worked last time, but today every time I attempt to download, it gives me error code 201 and tells me to seek help.
There does not appear to be anything pertinent to this issue on the forums already. Any help would be appreciated.

Hi LawnSnark ,
Welcome to Adobe Forums.
Error 201 indicates that the download of the installation files was unable to be resumed successfully or it can be lack of sufficient permissions as well.
Please create a new Administrator user account , Download Creative Cloud desktop app in new account and sign in.
Please reply for any assistance.
Thanks

MSI GeForce 3 Ti200 video out freezes

Hi!
I was testing the composite video and s-video out connectors. In my properties for the GeForce card i can choose between s-video and composite video, but they aren't automatically discovered as connected when pressing that button.
However when i press apply after choosing composite video, my monitor goes black, but i get no signal to my TV. My computer totally stops responding not even ctrl+alt+del will help. I have to press the reset button.
I downloaded TV-tool which i saw someone mentioned in this forum. It works flawlessly using TV tool using composite video(it takes sometime to switch between the monitor and tv but it works).
So as i understand it MSI's drivers or tool for switching between Monitor/video is broken. I have downloaded the latest drivers and tolls with MSI Live update 3, but it still doesn't work.
I'll be damned if i have to purchase a third party product for something that should work out of the box. I mailed MSI support about this and was directed to this forum, so i wonder if anybody else has this problem and found another solution than TV-tool?
I'm running Windows XP with the latest drivers.
Mats

Judging from the problems I and several other people on the forum have mentioned, there seems to be a problem with the nVidia 45.23 drivers and video. I get a grey screen with vids unless i turn down the hardware accel to almost nothing. Other people can get vid to show on their tv out. So if you havn't tried an older driver version yet, maybe you could use the good old xp driver rollback in the video device properties.

Problems with IOS7 update, my Itunes app keeps closing out, won't even let me in

I have had nothing but problems with my phone since the update. I have always loved my iphone but this has put me over the edge and I'm considering leaving the iphone community. I can't find support information anywhere. My local store is an hour away. Very frustrated!
My wifi won't stay on since the update, I've tried several different wifi locations to be sure and it appears to be the phone and not the wifi connection.
I am not able to get in to my ITunes app on the phone any more. It tries to open and then just ends up closing the app.
Someone HELP!

try settings>general>reset>reset net settings if this doesnt work try setttings>general>reset>reset all settings

Fms_adminConsole.htm remote login times out, won't connect

FlashMediaServer4.5_x64.tar.gz (fms 4.5.1 release)
linux instructions followed, success!
System Information, logs, etc.. Below.
uname -a
Linux poolhdz01.localdomain 3.0.0-16-generic #28-Ubuntu SMP x86_64 x86_64 x86_64 GNU/Linux
lsb_release -a
Distributor ID: Ubuntu
Description:    Ubuntu 11.10 x64
Release:        11.10
Codename:     oneiric
ps -A
PID TTY          TIME CMD
    1 ?        00:00:00 init
    2 ?        00:00:00 kthreadd
    3 ?        00:00:00 ksoftirqd/0
    6 ?        00:00:00 migration/0
    7 ?        00:00:00 migration/1
    9 ?        00:00:00 ksoftirqd/1
   10 ?        00:00:00 kworker/0:1
   11 ?        00:00:00 cpuset
   12 ?        00:00:00 khelper
   13 ?        00:00:00 netns
   15 ?        00:00:00 sync_supers
   16 ?        00:00:00 bdi-default
   17 ?        00:00:00 kintegrityd
   18 ?        00:00:00 kblockd
   19 ?        00:00:00 ata_sff
   20 ?        00:00:00 khubd
   21 ?        00:00:00 md
   22 ?        00:00:00 khungtaskd
   23 ?        00:00:00 kswapd0
   24 ?        00:00:00 ksmd
   25 ?        00:00:00 khugepaged
   26 ?        00:00:00 fsnotify_mark
   27 ?        00:00:00 ecryptfs-kthrea
   28 ?        00:00:00 crypto
   36 ?        00:00:00 kthrotld
   39 ?        00:00:00 scsi_eh_0
   40 ?        00:00:00 scsi_eh_1
   41 ?        00:00:00 kworker/u:2
   61 ?        00:00:00 kworker/0:2
189 ?        00:00:00 scsi_eh_2
196 ?        00:00:00 scsi_eh_3
216 ?        00:00:00 scsi_eh_4
217 ?        00:00:00 scsi_eh_5
218 ?        00:00:00 scsi_eh_6
219 ?        00:00:00 scsi_eh_7
220 ?        00:00:00 scsi_eh_8
221 ?        00:00:00 scsi_eh_9
225 ?        00:00:00 kworker/u:7
243 ?        00:00:00 kjournald
295 ?        00:00:00 upstart-udev-br
304 ?        00:00:00 udevd
339 ?        00:00:00 irq/16-mei
393 ?        00:00:00 udevd
394 ?        00:00:00 udevd
452 ?        00:00:00 kpsmoused
551 ?        00:00:00 upstart-socket-
570 ?        00:00:00 kjournald
578 ?        00:00:00 kjournald
602 ?        00:00:00 sshd
603 ?        00:00:00 rsyslogd
613 ?        00:00:00 dbus-daemon
658 tty4     00:00:00 getty
664 tty5     00:00:00 getty
668 tty2     00:00:00 getty
670 tty3     00:00:00 getty
676 tty6     00:00:00 getty
687 ?        00:00:00 irqbalance
697 ?        00:00:01 mysqld
705 ?        00:00:00 named
709 ?        00:00:00 cron
712 ?        00:00:00 atd
775 tty1     00:00:00 getty
839 ?        00:00:00 console-kit-dae
906 ?        00:00:00 polkitd
1052 ?        00:00:00 sshd
1071 pts/1    00:00:00 bash
1303 ?        00:00:01 fmsmaster
1324 ?        00:00:00 httpd
1325 ?        00:00:00 httpd
1326 ?        00:00:00 httpd
1327 ?        00:00:00 httpd
1410 ?        00:00:04 fmsedge
1489 ?        00:00:03 kworker/1:2
1506 ?        00:00:01 fmsadmin
1555 ?        00:00:00 httpd
1583 ?        00:00:09 fmscore
1736 ?        00:00:00 flush-8:0
1766 ?        00:00:00 kworker/1:1
1775 pts/1    00:00:00 ps
netstat --listen
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State
tcp        0      0 *:1935                  *:*                     LISTEN
tcp        0      0 *:www                   *:*                     LISTEN
tcp        0      0 *:2224                  *:*                     LISTEN
tcp        0      0 19.103-44-209.st:domain *:*                     LISTEN
tcp        0      0 poolhdz01.locald:domain *:*                     LISTEN
tcp        0      0 poolhdz01.localdo:19350 *:*                     LISTEN
tcp        0      0 *:1111                  *:*                     LISTEN
tcp        0      0 poolhdz01.localdoma:953 *:*                     LISTEN
tcp        0      0 poolhdz01.localdo:11110 *:*                     LISTEN
tcp        0      0 *:8134                  *:*                     LISTEN
tcp        0      0 poolhdz01.localdo:mysql *:*                     LISTEN
tcp6       0      0 [::]:2224               [::]:*                  LISTEN
tcp6       0      0 [::]:domain             [::]:*                  LISTEN
tcp6       0      0 ip6-localhost:953       [::]:*                  LISTEN
/etc/hosts
127.0.0.1       poolhdz01.localdomain localhost
127.0.1.1       netelubuntuinstall.localdomain netelubuntuinstall
/etc/hostname
poolhdz01.localdomain
/opt/adobe/fms/logs/master.00.log
#Version: 1.0
#Start-Date: 2012-03-01 19:29:49
#Software: Adobe Flash Media Server 4.5.1 r484 x64
#Date: 2012-03-01
#Fields: date   time    x-pid   x-status        x-ctx   x-comment
2012-03-01      19:29:44        1303    (i)2581173      FMS detected IPv6 proto
col stack!      -
2012-03-01      19:29:44        1303    (i)2581173      FMS config <NetworkingI
Pv6 enable=false>       -
2012-03-01      19:29:44        1303    (i)2581173      FMS running in IPv4 pro
tocol stack mode!       -
2012-03-01      19:29:44        1303    (i)2581173      Host: poolhdz01.localdo
main IPv4: 209.44.103.19        -
2012-03-01      19:29:44        1303    (i)2571011      Server starting...    -
2012-03-01      19:29:46        1303    (i)2581413      /opt/adobe/fms/Apache2.
2/bin/httpd -f ./conf/httpd.conf -d "/opt/adobe/fms/Apache2.2" -k start returne
d 0: [Thu Mar 01 19:29:44 2012] [info] mod_jithttp - FMS installation path: "/o
pt/adobe/fms/" -
2012-03-01      19:29:46        1303    (i)2581224      Edge (1410) started, ar
guments : -edgeports ":1935" -coreports "localhost:19350" -conf "/opt/adobe/fms
/conf/Server.xml" -adaptor "_defaultRoot_" -name "_defaultRoot__edge1" -edgenam
e "edge1".      -
2012-03-01      19:29:46        1303    (i)2571111      Server started (/opt/ad
obe/fms/conf/Server.xml).       -
2012-03-01      19:31:07        1303    (i)2581221      Core (1583) started, ar
guments : -adaptor "_defaultRoot_" -vhost "_defaultVHost_" -app -inst -tag "_
1" -console -conf "/opt/adobe/fms/conf/Server.xml" -name "_defaultRoot_:_defau
ltVHost_:::_1". -
/opt/adobe/fms/logs/edge.00.log
#Version: 1.0
#Start-Date: 2012-03-01 19:29:51
#Software: Adobe Flash Media Server 4.5.1 r484 x64
#Date: 2012-03-01
#Fields: date   time    x-pid   x-status        x-ctx   x-comment
2012-03-01      19:29:46        1410    (i)2581173      FMS detected IPv6 proto
col stack!      -
2012-03-01      19:29:46        1410    (i)2581173      FMS config <NetworkingI
Pv6 enable=false>       -
2012-03-01      19:29:46        1410    (i)2581173      FMS running in IPv4 pro
tocol stack mode!       -
2012-03-01      19:29:46        1410    (i)2581173      Host: poolhdz01.localdo
main IPv4: 209.44.103.19        -
2012-03-01      19:29:46        1410    (i)2631174      Listener started ( _def
aultRoot__edge1 ) : localhost:19350/v4 -
2012-03-01      19:29:47        1410    (i)2631174      Listener started ( _def
aultRoot__edge1 ) : 1935/v4     -
2012-03-01      19:29:48        1410    (i)2631174      Listener started ( _def
aultRoot__edge1 ) : 127.0.0.1:19350 (rtmfp-core)/v4     -
2012-03-01      19:29:48        1410    (i)2631174      Listener started ( _def
aultRoot__edge1 ) : 209.44.103.19:19350 (rtmfp-core)/v4 -
2012-03-01      19:29:48        1410    (i)2631509      Public rtmfp-core addre
sses for listener _defaultRoot__edge1 are: 127.0.0.1:19350;209.44.103.19:19350-
2012-03-01      19:29:48        1410    (i)2631174      Listener started ( _def
aultRoot__edge1 ) : 127.0.0.1:1935 (rtmfp)/v4   -
2012-03-01      19:29:48        1410    (i)2631174      Listener started ( _def
aultRoot__edge1 ) : 209.44.103.19:1935 (rtmfp)/v4       -
2012-03-01      19:31:07        1410    (i)2581252      Registering core (1583)
/opt/adobe/fms/conf/fms.ini
SERVER.ADMIN_USERNAME = zach
SERVER.ADMINSERVER_HOSTPORT = :1111
SERVER.PROCESS_UID = 1001
SERVER.PROCESS_GID = 1001
SERVER.LICENSEINFO =
LIVE_DIR = /opt/adobe/fms/applications/live
VOD_COMMON_DIR = /opt/adobe/fms/webroot/vod
VOD_DIR = /opt/adobe/fms/applications/vod/media
SERVER.FLVCACHE_MAXSIZE=500
SERVER.HTTPD_ENABLED = true
ADAPTOR.HOSTPORT = :1935
HTTPPROXY.HOST = :8134
ADAPTOR.HTTPIDENT2 =
VHOST.APPSDIR = /opt/adobe/fms/applications
APP.JS_SCRIPTLIBPATH = /opt/adobe/fms/scriptlib
LOGGER.LOGDIR =
SERS.HTTPCOMMAND_ALLOW = true
/opt/adoble/fms/conf/Users.xml
<Root>
    <UserList>
           <User name="${SERVER.ADMIN_USERNAME}">
                    <Password>No Displayed</Password>
            <Allow></Allow>
            <Deny></Deny>
            <Order>Allow,Deny</Order>
        </User>
</UserList>
    <AdminServer>
        <HTTPCommands>
            <Enable>${USERS.HTTPCOMMAND_ALLOW}</Enable>
            <Allow>ping</Allow>
            <Deny>All</Deny>
            <Order>Deny,Allow</Order>
        </HTTPCommands>
    </AdminServer>
</Root>
FMS 4.5.1 is accessible here http://209.44.103.19/
Maybe out of this information it will be seen why the http:80 login will not accept my credentials.
Thanks in Advance.

I solved my own issue.. The default admin port on :1111 was not redirected via NAT, and instead used nmap to route open ports, and 2222 was available. Typically used for ssh terminal administration..
Edit /opt/adobe/fms/conf/fms.ini and change:
From SERVER.ADMINSERVER_HOSTPORT = :1111
To SERVER.ADMINSERVER_HOSTPORT = :2222 or port that is bi-directional via tcp
I would suggest Adobe to set SERVER.ADMINSERVER_HOSTPORT = :2222 by default to aleviate this common issue.

GF3-TI200/TV out won't autodetect

Similar Messages

Maybe you are looking for