Gf4 Ti4200 8x With Vivo Problem

ok my problem is that I can't play any games now and it used to work fine before that thing that I notice today was that the adapter info window displays 16mb instead of 128mb and some games like halo they don'y like that so they don't allow you to run the game I am not sure what to do so if anyone has any info please reply here
here is a picture of what I am talking about
and I also check the irq interrut and there is nothing that is conflicting with the card . thanks in advance :(

I had a similar problem with my new 5900 Ultra VTD256. The driver said 128Meg of RAM even though I had 256Meg. I installed several versions of the Detonator drivers and none worked. Finally, I found a beta of the Det 52.13 drivers and it cleared up all my problems! They're also much faster in Halo. You can find them here:
http://www.3dchipset.com/drivers/beta/nvidia/nt5/5213.php

Similar Messages

GF4 Ti4200 TV-Out Adapter problem

I just bought a 4200 MSI card used but the TV-Out adapter that came with it doesn't seem to fit into the card. There's a black piece of plastic in the middle of the adapter preventing it from fitting into the TV-out port.
Seems that it would fit if that piece of plastic wasn't there. Just wondering if this is the wrong adapter he sent me or was a recall problem within MSI. Thanks for any help.

I just recently connected a tv to my card (G4Ti4200) also, and had the same prob...your card should have come with an adapter of sorts. Its a y connector, the single end connects to your vid card, it looks like a ps/2 connection similar the a mouse...then on the other side one of the two connecters stemming from the single, is an s-video connector. Umm I dont know if that'll help ya but ... Good luck with it

Gf4 Ti4200 8x and TV tuning

Hi,
I am confused about tv drivers installed automatically for my Gf4 Ti4200 8x With Vivo. The card doesn't seem to have any antenna input, and I don't think it suports tv tuning. Why is there a dirver for tv tuner installed?

I had a similar problem with my new 5900 Ultra VTD256. The driver said 128Meg of RAM even though I had 256Meg. I installed several versions of the Detonator drivers and none worked. Finally, I found a beta of the Det 52.13 drivers and it cleared up all my problems! They're also much faster in Halo. You can find them here:
http://www.3dchipset.com/drivers/beta/nvidia/nt5/5213.php

GF4 Ti4200 and Win98 - HELP ! serious problem with drivers !

Ok, I could successfully install the MSI GF4 Ti4200 128 in Windows 2000, no problem there, everything is working.
I then installed Win98 as a second OS, I launch the drivers setup (from MSI CD) and I reboot as wanted by the setup. The PC reboots, the Win98 screen appears and suddenly...it reboots by itself, no message, no black screen. I tried with other driver versions from NVidia and this time, I get a freezed black screen after the Win98 screen, I must press reset. I had to enter the safe-mode to remove the drivers and get the usual 640x480 in 16 colors.
What's going on ? I tried to change my bios parameters, disable the virus detection option, everything that could make problems ... but no success. I also tried a second Win98 installation, with DX 8.1 installed before the drivers but still the same problem.
My system is AMD XP 2100 with Asus A7V333 motherboard - 300W for power, is the problem caused by some VIA chips ? I tried with their 4-1 drivers and stuff on the CD but it really doesn't want to work.
Please help...

after searching a bit on the forum, I found a thread where someone pointed out a problem caused by memory, greets to him. I have 1 gb of ram and I added these lines to my system.ini :
[vcache]
MinFileCache=65536
MaxFileCache=131072
ChunkSize=2048
NameCache=4096
DirectoryCache=96
ConservativeSwapFileUsage=1
Values may change with more/less memory...And now it works perfectly in Win98.

Nvidia GF4 Ti4200 Driver problems!!!

I have built up a new system with the following:
MSI K7N2G-ILSR
nVIDIA GF4 Ti4200 128mb DDR
AMD XP2400+
512MB 333 DDR
PSU 350W
WD 80GB Caviar (partitioned)
Thermaltake Volcano 9 HSF
I have installed XP-PRO (+SP1). The problem I have is the drivers. First off I install the nFORCE 2 platform drivers - Fine, then I install the VGA Driver disc 40.72's. According to the installation, all is fine. When the system reboots, we have a no go (blank screen). I then need to go back to last known settings....yeah, yeah!
So far I have downloaded nearly all the drivers off the Nvidia site as well, using my other PC. (1MB CABLE). Each one cause pretty much the same problem, including all the WHQL versions.
I even downloaded the Nvidia nFORCE 2 platform package, which included a VGA driver. This still caused the same result.
My next step was to swap over with my other PC. Once I inserted a GeForce2 64MB DDR PRO/GTS, all appears fine, the drivers install...no problem.
I insert the GF4 Ti4200 into my ECS K7S5A, and low and behold all is fine here.....drivers, no problems.
Any idea's......anyone??????
Like compatibility problem or what..... I'm totally lost and confused now!!
MARKONE.

No, Markone from UK, novice PC builder..... :D
Borgstif:
"uninstall the driver in safe mode and the Reg entry in WinXp "
Explain exactly what you mean, I can choose start up in safe mode yes, but what will that do for me??
gfilitti:
Not sure exactly what specs you want? this is my first build ever. The PSU is a bog standard fitment inside an ATX Case, not a separate fitment. Can you be more specific about "timing etc..."
The Ti4200 is working fine in my less advanced ECS K7S5A machine......with 300W PSU.
And likewise the Nforce 2 machine operates my Geforce 2 GTS/PRO also with no problems.
Markone.

Problem w/GF4 Ti4200 vtd-8x

I had problems with my new MSI GF4 Ti4200 vtd-8x 128mb running on a 648 Max mobo. The mobo supports agp 8x but both riva tuner and display properties showed it running on agp 4x. I would really appreciate any help I can get.

Try updating both mobo and VGA card drivers.
Do clean un-installation before installing new VGA driver...
All the Best... :D !!!

Help with GF4 Ti4200 128mb DDR AGP8X VITO

i need help with this card.
when i play most of my games, the fonts will appear blur. and also sometimes some textures will appear jumbled up or distorted.
can anyone help me with this particular problem? Also, how do i check if my comp is running @ 533mhz FSb and 33mhz for the RAM? is it advisable to do so ?
my comp stats is :
P4 2.4ghz(FSB 533)
MSI 648 Max (SIS 648) AGP8x+DDR400+ATA-133
Kingston 512mb DDR 333
GF4 Ti4200 128mb DDR AGP8X VITO
Creative SB Audigy

well i'm new at this but here goes...
FREQ / VOLT Control
cpu/dram - by SPD
dram freq - 167mhz
auto detect cpu fsb - enable
cpu freq - 133mhz
agp/pci freq(mhz) - 66/33
cpu multiple fac - locked
dram Vcore adjust - 2.6v
cpu Vcore adjust - auto
PC Health
Vcore - 1.456-1.472 V
+3.3V - 2.944
+5.0V - 4.999
+12V - 11.876
-12 - -11.672
-5 - -5.178
Batt Voltage - 3.056V
Advance Chipset Features
AGP Aperture Size - 64M
should i change this to 128M since my graphic card is 128mb ?

640x480 and above, capture with MSI GF4 Ti4200 VTP

could anyone successfully perform this operation ?
The weird thing is that if I set a capture of something like 5 fps in VirtualDub and 640x480 (I tried with several codecs and thought that decreasing the fps would improve the bandwidth usage), it still doesn't want to capture anything -> 0 frames. The maximum I can get (15% frames lost) is 320x200 at 30 fps. I tried to capture directly to memory as it's supposed to be very fast, no luck.
Maybe my system is not monster enough, don't know.... ?( Or could that be the card which is limited for this ?
MSI GF4 Ti4200 VTP - 1 gig RAM (DDR 333), Athlon XP 2100, IBM ICL35 120 GB - OS : W2K.
WDM 1.16 from MSI-CD. I tried with WDM 1.08 too.

your system is fine for this kind of job....
i have no problem in capturing full pal (768x...) in 30 fps (using included wincoder and mpeg1 or mpeg2 codecs) 60% cpu load on duron @1380
virtual bud will need somethong better then 1,3gh duron but i got no problems with 640x480 divx pro 5.02 25fps on my current sysetm (but the cpu load is high 75-90%) (0% frame lost)
some motion codecs (mjpg) will need both fast cpu and fast hdd....
uncompresed will produce so much data that even very fast hdd's will by to slow
but it is in fact weird 15% frame lost on 320x200 is much to high.. what board are u using?? are the latest 4in1 drivers instaled (very important for w2k) by shure that agpx4 and bus mastering are on... are u using any other extensin cards (tv tuner, off board sound, ide, lan??) if yes try removing them

GF4 Ti4200/Vivo - Video capture pauses

Hi All,
Did a search and could not find anything on this topic.
When capturing video from S-Video input, the video is not smooth. Getting momentary 'pauses' that leads to very jerky video on playback. I've checked the 'smooth video' option, but to no avail.
System specs:
MSI (oem'd Medion) MS-8889 GF4 TI4200 128MB Video card
P4 2.66 CPU
768M PC2700 DDR
120GB Seagate Barracuda 7200RPM ATA133
Original Shipped drivers for Video and WDM Capture (30.30 Video and 1.1 WDM)
Any help would be appreciated.
TIA,
SteveK

Well, I tried capturing with Virtualdub and it works much better (no pauses or stutters). But there is a fairly large number of dropped frames (about 20% dropped).
I've taken all of the standard steps to avoid dropped frames....no network access (no netowrk plugged in), no TSRs running, no antivirus, running with DMA enabled, hard disk is de-fragged (although I am running with a single hdd partitioned into 3 logical drives. CPU is a P4-2.66Mhz, so there's plenty of horsepower. The video card is an MSI-8889 (GF4 TI4200 8x w/128MB) ViVo. O/S is XP. Mobo is an MSI-6701 (SiS Chipset).
I believe the Vivo is stricly software capture, so the results are directly related to the software used for capture.
Can anyone recommend (or use) another capture product for this type of card (with good results)?
TIA,
SteveK

Help with GF4 TI4200

Everytime I start window xp the message vbios.dll failed messages appear, and If i go into display and select those 2 additional MSI options it get an error and the thing closes... any solution to this?
My cpu is
P4 2.53
Asus P4S8X
Samsung 512 DDR
MSI GF4 TI4200 128mb 8x AGP

FFSabin,
Use notepad to make a new file and put in it what I quoted below and then save it with the .reg extension.
Quote
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINESOFTWARENVIDIA CorporationGlobalNVTweak]
"Coolbits"=dword:ffffffff
"NvCplEnableAGPSettingsPage"=dword:00000001
"NvCplEnableAdditionalInfoPage"=dword:00000001
"NvCplEnableClearViewPage"=dword:00000001
That will open all the extra options in the Detonator4 Drivers including the Core and RAM Speeds for your GF4.
Take Care,
Richard

Slow gf4 Ti4200

I'm having a problem with my gf4 Ti4200. It runs at slow framerates even at lower resolution and graphics during games. Ive tested with Nightfire and UT2003 and my friends PC with gf2 runs better. Its in 4x mode and ive been told about dma. whats dma?
Are there any other suggestions anyone has that may increase my gf4's performance?
AMD AthlonXP 2100+
256mb DDR
GF4 Ti4200 128mb 4x
KT4V-L(MS-6712)
Sonic explosion soundcard
300W PSU

Im beginning to lose my patience with this machine. Im not very technical with a computer so i really need your help. Ive managed to pin point the problem with 3Dmark2001. The highpolygon test with 8 lights shows the same problem i have with direct3D games, a very stunted (unsmooth) movement and i get 9.0Mtriangles/sec (Not sure if thats good or bad).
Ive looked at other threads, and one struck me as odd about installing a new mouse seemed to interfer with the video card. The link is here and its the third post down:
http://www.msi.com.tw/program/e_service/...10433boardid=9
It sounded like he was having the same problem as me, and i have recently installed a new mouse and keyboard but hadn't registered that this could be a problem.
I was hoping i had an incorrect direct3D setting or something to do wiht multilights or multipolygons. Opengl works fine, its just the direct3D. Im struggling here. Can someone please help me.
Ginster

GF4 TI4200 BSOD Dilemma - Please help!

Greetings gurus and fellow frustrated gamers. I purchased MSI's GF4 TI4200 about a year ago and have been putting up with a problem I thought was related to other components for a long time. Every single 3D graphics game I play in windows XP will eventually and utterly crash with a Blue Screen of Death (BSOD) which relates always to the nv4_dsp.dll file which is Nvidia's driver. I have tried 12 drivers...MSI/NVidia/experimental with no change. With help from the folks on the forum I replaced the PSU with an Antec 400w with no change. I have tried my old Geforce2 MX400 with the same problem. I have reformatted the computer 8 times and removed every single additional component except what was required to test my problem. I just purchased Star Wars Galaxies and am now crashing 8-15 times a day. I generally go 20-30 minutes between crashes. This is no longer acceptable. I have received this crash on Warcraft III, WC3:TFT, Neverwinter Nights, SWG, Black & White, and many more.
I have found through search engines that this has something to do with some Windows XP systems and Nvidia drivers and is an issue that does not have a fix. I am hoping that you can offer something that I can do to fix this problem.
Before you ask...this has nothing to do with any other component in my computer. It is not heat, the psu, the motherboard, the memory, the hard drives, etc. I have replaced every single piece in this computer and it still occurs. Check out this link for an example of someone else with the same problem: Similar Problem or use a search engine and type: nv4 blue screen. You will see what I mean...this is happening to tons of people.
My question: Is there a fix?
Any help is most appreciated. If there is not a fix, ATI is my only direction I can take.

Richard,
Well you are right about it not using IRQ 5, however, it is not conflicting with any other IRQ that I can see. The view under resources by connection reads:
(ISA) 0 System Timer
(ISA) 3 Communications Port(COM2)
(ISA) 4 Communications Port(COM1)
(ISA) 6 Standard floppy disk controller
(ISA) 8 System CMOS/real time clock
(ISA)11 Microsoft ACPI-Compliant System
(ISA)13 Numeric data processor
(ISA)14 Primary IDE Channel
(ISA)15 Secondary IDE Channel
(PCI) 5 VIA Rev 5 or later USB Universal Host Controller
(PCI) 5 VIA Rev 5 or later USB Universal Host Controller
(PCI)16 NVIDIA GeForce4 Ti 4200
(PCI)17 Texas Instruments OHCI Compliant IEEE 1394 Host Controller
(PCI)18 Wireless-G PCI Adapter
(PCI)19 Creative SB Live! Series (WDM)
Please advise. Thank you for the response.
Jeremy

Msi gf4 ti4200 td64

For starter, sorry about my bad English !
Sys Specs:
Amd Athlon 900 (o/c 945)
320 MB ram
MSI K7T Turbo 2
MSI gf4 ti4200 td64 64mb
Last week I bought my video card. I didn't have problems until few days ago. Mouse movement in Win XP is choppy, not all the time. I played with sample rate but that didn't help.I tried my old gf2 mx400, and i didn"t have problems. I was reading threads and I realized that the problem may be in power supply. It's a bit old (about 2 years :-) ), iam not sure is it good if it is warm . This problem occurd just after the problem with HD (detection problems, messed HD name..), i checked IDE cable, it's good. 3d expirience is not shownig voltages and temepatures. Fuzzy logic 3 somtimes alerts that the temperature in chassis is 131C!! which is impossible. I sens lack of fps in games.
Please help!

Leadman Electronics Model LP-6100
+3.3V +5V +12V -5V
235W 10A 20A 10A 0.1A
*250W 10A 25A 10A 0.1A
300W 10A 30A 12A 0.1A
400W 10A 40A 16A 0.1A

HELP! severe probs w/ gf4 ti4200 128 8x

it seems that just about every game I have installed on my new comp has had some video error. quake 3 and return to castle wolfenstien had an array of dots on the screen. and just about every other game i have installed (americas army, halo pc, etc) has frozen during a new game load and reset the comp. i installed the latest drivers from nvidia, but it didnt help. can anyone help??
Running:
P4 2.4Cghz w/ HT enabled
Intel 865PERL MB
512 SimpleTech DDR 400
MSI GF4 TI4200 128 w/ 8x AGP + VIVO

ok, i just went to best buy and bought an Antec 400 watt ps running 18a at 12v...AND IM STILL HAVING PROBLEMS! a couple of games work at the lowest possible settings (quake 3, rtcw) and Halo works only in safe mode. if i push the graphics any higher, they wont run. Several other games (Americas Army) still wont run at all. i am sure the vid card is the one with probs cause i have gotten a device error from it from some games. this seems like a lost cause but if anyone could help it would be greatly appriciated.

Gf4 Ti4200 8x With Vivo Problem

Similar Messages

Maybe you are looking for