GF4 ti4200 TV-OUT Problem. not all colors.

Hello, I have a GF4 Ti 4200 128MB 8X.
and i have a problem with my GF4 card.
when i use my tv-out. i don't get the right colors.
its like using 256 colors on the output image.
and i have tried diffrent cables, and drivers even diffrent tvs.
anyone have had this problem?
i also tried to change tv-formats and stuff like that. and the results are the same.
i formated and changes OS also and with the same result.
please help me. it would me appriciated.
thanks Fredrik

I just recently connected a tv to my card (G4Ti4200) also, and had the same prob...your card should have come with an adapter of sorts. Its a y connector, the single end connects to your vid card, it looks like a ps/2 connection similar the a mouse...then on the other side one of the two connecters stemming from the single, is an s-video connector.    Umm  I dont know if that'll help ya but ...             Good luck with it

Similar Messages

  • GF4 Ti4200 TV-Out Adapter problem

    I just bought a 4200 MSI card used but the TV-Out adapter that came with it doesn't seem to fit into the card.  There's a black piece of plastic in the middle of the adapter preventing it from fitting into the TV-out port.
    Seems that it would fit if that piece of plastic wasn't there.  Just wondering if this is the wrong adapter he sent me or was a recall problem within MSI.  Thanks for any help.

    I just recently connected a tv to my card (G4Ti4200) also, and had the same prob...your card should have come with an adapter of sorts. Its a y connector, the single end connects to your vid card, it looks like a ps/2 connection similar the a mouse...then on the other side one of the two connecters stemming from the single, is an s-video connector.    Umm  I dont know if that'll help ya but ...             Good luck with it

  • Log out problem in all installed desktops

    Hello, my name is Surf Bluecrab.
    I have many distro on my system but I am new to Arch.
    I have installed a month ago the "Bridge Linux" distro and I really like it.  So far this is the one I am having the most fun with and software available
    thru the AUR is quite recent and I am now becoming comfortable with PACMAN, PACAUR and Octopi.
    I have decided that Arch will become my main OS alongside a well configured and stable Fedora that can always be used for system rescue and stuffs.
    I have a question and a problem I would like to ask the community:
    1- I was wondering if a system installed from Bridge would be considered "Vanilla Arch" and if I would be allowed to join the Arch community?
    2- I have installed all popular desktops and compiled thru PACAUR some least popular ones.  After a full system upgrade and desinstaling a non working 'Equinox Desktop' I have noticed a problem I cannot solve that happend in ALL my installed desktop:
    I cannot fully logout. For example in KDE, if I logout, all windows and background shutdown but the mouse pointer keep moving forever never returning to lxdm ( the installed login manager that I prefer ).  The funny thing is the same thing happens in MATE, XFCE, LXDE.  The only way to fully log out is for me to log into console and kill lxdm-binary to automatically return to the graphical login.  I am unsure if the problem is related to lxdm or something else.  If anyone got an idea where I should look to try to fix this I would appreciate.
    Well thats it for now, I havent read all the faq and rules yet so please be patient with me, I whould sincerly like to join this community, after playing with this distro for a month and learning a few things I have realised how much more tweaking fun Arch is compared to the others.
    Thank you for readin.
    PS : I am also shopping for a Raspberry Pi, I havent decided if I'll go with Raspbian or Arch arm.
    Last edited by surf.bluecrab (2014-04-19 14:15:31)

    First, Welcome to the Arch Linux Community.  You are in
    But, as you seem to be aware, Bridge Linux is not Arch Linux.  It is similar, but there are differences.  Unfortunately, it is not we who are cognizant of what are those differences.  The experts there are the people of Bridge itself.  We will ask you to take support questions to them.  We do that because our charter is to provide these forums as a resource to support Arch Linux.  We do not want to allow confusion to be introduced by dealing with special cases to handle non-Arch distributions.   In your case of not being able to log out, we cannot help you.  The issue may, or may not be caused by the differences in Bridge.  We are not going to be exploring those differences here.
    As to your first question, " if a system installed from Bridge would be considered 'Vanilla Arch' ".  If you mean, I installed Bridge, is it vanilla Arch, no.  If, on the other hand, you mean this article on installing Arch Linux from an existing Linux distribution (In your case Bridge), yes that is a means of installing a true Vanilla Arch.
    I will leave this open for now in the spirit of welcoming you to the Arch Community (even if you are not running Arch just yet )

  • 0BP_DEF_ADDRESS_ATTR datasource problems not all data in BW

    Hello!
    I have a BIG problem with business partner address attribute in BW....
    In CRM system I have one million records, however in BW only have 200 000... I have checked the table BUT021 and all is correct... Somebody can help me with this problem, exist some flag or something like this that I must check before load....
    I am doing the DELTA INIT...
    Thanks a lot...

    Hi Rocio,
    The data for the address is time-dependent. Make sure you have that option checked for the info-object in BW.
    For more details check this link:
    http://help.sap.com/saphelp_nw04/helpdata/en/2f/fe9a13db67a24dad2766acc03ec0df/content.htm
    Bye
    Dinesh

  • Posterous blog HTML Snippet problem - not all of blog is showing up...

    Good morning all! So I was looking for a solution for our newly formed website (I'm a novice) where I could have multiple users update our blog page without having to use iWeb to do it. I read up on Posterous and it appears this would be an ideal solution. So I found some code from another Apple Discussions poster, Alancito, that would pull my Posterous blog directly into the iWeb page I created. Well it has done that, sort of...
    I see the header from the blog, but the content isn't visable. Well, actually if you highlight the header or "blog differently" and then hold down like you're scrolling down the page, the info is there. But the HTML snippet always cuts it off. Even if I expand the size of the snippet in iWeb, it ALWAYS reverts back to this same size.
    I'm in a bind here and could really use some help.
    Here's the blog page address: http://www.sporkfoodwagon.com/SporkFoodWagon/Blog.html
    And here's the code I was provided.
    <iframe height="100%" allow transparency="true" frameborder="0" scrolling="no" style="width:100%;border=none" src="http://sporkfoodwagon.posterous.com/"></iframe>
    Message was edited by: andrewrichardson

    Andrew ~ Perhaps someone will suggest a solution to the HTML Snippet problem, but meanwhile, with this recent improvement to Posterous:
    http://blog.posterous.com/posterous-unveils-pages
    ...perhaps you don't need an iWeb site at all. If you must have one, consider linking to your Posterous blog directly from iWeb's navigation bar:
    Create a blank internal page titled "Blog" (actually you can name the page whatever you want.) Then in that Blog page add an HTML Snippet with the following code:
    <script type="text/javascript">
    parent.window.location = "http://www.yourblogname.com"; // change this to your own URL
    </script>
    ...Once published, clicking on "Blog" in the navbar will immediately redirect to your external Blog page. (Thanks to Cyclosaurus for the code).
    And to return from Posterous back to your iWeb site:
    http://blog.posterous.com/pages-20-add-links-to-your-sidebar

  • Bios update for MSI GF4 Ti4200-TD64 out now!

    Hi.Well on Liveupdate there is out MS 8870 BIOS,and there is 3 BIOS:
    Ver100
    Ver110
    Ver120
    Here is the link:http://tw.msi.com.tw/autobios/SVga/Bios/Ms8870/
    Anyone knows whats been fixed in this BIOS versions?

    Hi there,
    I got this message from MSI:
    Quote
    We may release different version of BIOS for the same
    model but different options.
    For example above,
    MS-8870 BIOS version 1.00 is for MS-8870 64MB
    MS-8870 BIOS version 1.10 is for MS-8870 128MB
    MS-8870 BIOS verison 1.20 is for MS-8870 64MB (a
    different memory type)
    A wrong version may case the system never boot
    again!!!
    Be very carefull what you download!

  • HDMI output to monitor not displaying all colors

    I am trying to use a second monitor on my Satellite S55t-b5152 and am able to get 1920x1080 output from the HDMI port through an adapter to either VGA or DVI into my external monitor, but with either adapter the colors look washed-out and not all the colors that are displayed on the internal monitor show up on the external monitor.  For example the position indicator in scroll bar on some apps shows up on the internal monitor, but disappears when I drag that window onto the external monitor.  I've tried multiple monitors and they all have the same symptom. I've investigated this some on external forums and it seems to be that the HDMI output under some conditions assumes that it is connected to a TV instead of a monitor and it limits the output color range.  On some graphics drivers it is possible to override that assumption and get the full range output from the HDMI port.  I haven't found a way to do that for the graphics driver on the S55t-b5152. Has anyone figured this out?

     
    Satellite S55T-B5152
    through an adapter to either VGA or DVI...
    Just want to comment that I'm not at all surprised that an adapter does not produce true colors. I'm sometimes amazed they work at all.
    Yours is HDMI 2.0 which complicates things still further.

  • Not all flash videos on websites work

    Hi guys,
    First off all, I'm really excited because I made the switch to Apple and Leopard. Yay! But I have one issue I can't figure out.
    Not all flash videos on websites work, for example: www.x17online.com
    Sometimes it's a blank square and sometimes I see an image but I can't play the video. I have flash installed so what's wrong?
    Any help is appreciated!

    Got a mbpro 2.4 multi touch, 2gb 250gb safari 3.1.x
    Video glitches in flash in safari [not in ffox 2.x] !
    The video:
    http://www.symfony-project.org/screencast/cart
    Seems like build up problems...

  • Not all PDF's transfering to iPad 2 in sync

    Hello all!
    Today I downloaded a bunch of free magazines in PDF format on my laptop. When they were all downloaded I selected them all and dragged them into iTunes. I dropped them in the Books folder under the Library heading. All of the magazines show up in there when I click on books. I can even double click on them and read them on my laptop. When I plug in my iPad 2 and click on that, then click on the Books tab they all appear there under the Books heading as well. I have checked Sync Books, then All Books. Once the sync is complete only half of the books are on my iPad under iBooks (I have clicked on Collections and selected PDFs). When I go back to iTunes all the books are showing there. I have even tried changing the option to sync Selected Books, and then physically checking them all but that doesn't work either. So I went through the magazines that were on my iPad and unchecked them, leaving only the ones that didn't sync checked. When I re-synced it did put a few of the magazines that didn't sync last time, but not all of them. I tried checking All Books and syncing again and now I can't even get the ones I had on before back on. It's maddening! If anyone can help me figure out why not all magazines are going on to my iPad I would be so thankful! By the way I checked Newstand and they're not there either.
    Thanks in advance!

    Hi,
    This is an unusual workflow, we have typeset the files in Tex. One of our client using XyVision. They have done the template in Xyvision, our requirement is we need to send full page as .eps with properly cropped, they will load the .eps into it and they will create PDF.
    Here the problem is tex has links in some of the pages, when we saveas the file to .eps some links are there some were gone.
    The Acrobat has compability to save the .eps with links we have checked and it is working for www.XXXXX etc.. but not working for SI Text etc..
    We though that if Acrobat is capable of storing the links in .eps for www.XXX then why not for other. We would like to know the storage details how this links are storing.
    Workflow is converting PDF full pages to .eps file with links, this .eps will be placed in xyvision then they will create the PDF so that the links will retain.
    Shaji

  • Home sharing iMac and MacBook Pro: not all songs are playable

    Hello
    I set up Home Sharing between my iMac and MacBook Pro so that I could stream the music that's on the iMac to the MacBook Pro. On the MBP there are no songs, all of them are in Apple Lossless format on my iMac. I first tried to use "‘share my library on my local network" but because I wanted the play count to go up as well I chose for "Home Sharing". Setting up was simple. After all preferences were adjusted, I opened iTunes on the MBP and it immediately found the shared iMac library. There's now only one problem: not all songs are playable. Some don't even start. How is this possible and what do I need to do to resolve this?
    FYI: the iMac is connected via ethernet to my cable modem which sends a wireless Wi-Fi signal to the MBP. Signal quality is excellent.
    Also, is it possible that playcount is only available with Home Sharing and not with "share my library on my local network"?
    Thanks!

    It very well could be the antivirus app, most are intrusive and debilitate rather than enhance performance and should be removed using the developers instructions. You haven't really told us anything useful such as any settting you may have changed. However if you began working backwards resetting any changes and uninstalling the apps added since the performance issue started then you probably will find your issue. 

  • Not All Items Load

    Is there a way to find out why not all items load? I see that all but one item completed on the page, but it's not clear to me what that item is—I looked at the activity bar, but no help there, either. I tried the debug feature, but I'm not sure how to use it.
    This is the page on my website: http://www.edensart.com
    Thanks.

    Hello:
    When first accessing the page, I get 24 out 25 items completed in the status bar; also there is narrow white border along the top of the header—which shouldn't be there. After I refresh the page, the narrow white border disappears—although the 24 out 25 items completed remains.
    A friend looked at the page and suggested this:
    <style type='text/css' media='screen'>@import
    "http://www.edensart.com/index.php?css=includes/styles_css";</style>
    —I think should look like so:
    <style type='text/css' media='screen'>@import
    url("http://www.edensart.com/index.php?css=includes/styles_css");</style>
    Unfortunately, I can't correct this as the code on the template page (I use ExpressionEngine for the blog area) is different (more cryptic) than the above suggested fix.
    Thanks for looking.

  • Not all iphoto pictures are available for sync with ipad2

    Hallo,
    I am a new apple user. Have iTunes latest version on my MacMini. Want to sync all of my photos from iPhoto to my iPad2. Problem: not all Photos are available for sync.
    Why doesn´t iTunes see all of my Photos?
    Thanks for answer.
    Iceman21

    It is not a problem of iPad2 because I have the same problem with my iPhone.
    e.g.: I can see the event in iTunes but with 0 photos. So iTunes find the events but not the content???

  • I like and use Top Sites but it has become unsuable with this constant blacking out and reloading the thumbnails.  My MBP has not seen a problem at all.   I have been searching every other day for over a month trying to find a fix in Windows Safari with n

    I like and use Top Sites but it has become unsuable with this constant blacking out and reloading the thumbnails.  My MBP has not seen a problem at all.
    I have been searching every other day for over a month trying to find a fix in Windows Safari with no joy.  I want to resolve, not switch browsers. Please offer up a solution that only refreshes the Top Site thumbnails once a day or as some controlable interval.  Started about two versions ago, now on ver 5.1.5. Windows 7 64bit.
    Safari 5.1.5 for Win64 bit, Windows 7!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    I think I solved the wifi connection problem, just by switching off completely the router! sounds trivial, but in this case it worked!!!
    the funny behaviour of the trackpad/cursor still persists. any suggestion???
    thanks again

  • Nvidia GF4 Ti4200 Driver problems!!!

    I have built up a new system with the following:
    MSI K7N2G-ILSR
    nVIDIA GF4 Ti4200 128mb DDR
    AMD XP2400+
    512MB 333 DDR
    PSU 350W
    WD 80GB Caviar (partitioned)
    Thermaltake Volcano 9 HSF
    I have installed XP-PRO (+SP1). The problem I have is the drivers.  First off I install the nFORCE 2 platform drivers - Fine, then I install the VGA Driver disc 40.72's. According to the installation, all is fine.  When the system reboots, we have a no go (blank screen). I then need to go back to last known settings....yeah, yeah!
    So far I have downloaded nearly all the drivers off the Nvidia site as well, using my other PC. (1MB CABLE).  Each one cause pretty much the same problem, including all the WHQL versions.
    I even downloaded the Nvidia nFORCE 2 platform package, which included a VGA driver.  This still caused the same result.
    My next step was to swap over with my other PC.  Once I inserted a GeForce2 64MB DDR PRO/GTS, all appears fine, the drivers install...no problem.
    I insert the GF4 Ti4200 into my ECS K7S5A, and low and behold all is fine here.....drivers, no problems.
    Any idea's......anyone??????
    Like compatibility problem or what..... I'm totally lost and confused now!!
    MARKONE.

    No, Markone from UK, novice PC builder..... :D
    Borgstif:  
    "uninstall the driver in safe mode and the Reg entry in WinXp "
    Explain exactly what you mean, I can choose start up in safe mode yes, but what will that do for me??
    gfilitti:  
    Not sure exactly what specs you want? this is my first build ever.  The PSU is a bog standard fitment inside an ATX Case, not a separate fitment.  Can you be more specific about "timing etc..."
    The Ti4200 is working fine in my less advanced ECS K7S5A machine......with 300W PSU.
    And likewise the Nforce 2 machine operates my Geforce 2 GTS/PRO also with no problems.
    Markone.

  • GF4 Ti4200 and Win98 - HELP ! serious problem with drivers !

    Ok, I could successfully install the MSI GF4 Ti4200 128 in Windows 2000, no problem there, everything is working.
    I then installed Win98 as a second OS, I launch the drivers setup (from MSI CD) and I reboot as wanted by the setup. The PC reboots, the Win98 screen appears and suddenly...it reboots by itself, no message, no black screen.  I tried with other driver versions from NVidia and this time, I get a freezed black screen after the Win98 screen, I must press reset.  I had to enter the safe-mode to remove the drivers and get the usual 640x480 in 16 colors.
    What's going on ? I tried to change my bios parameters, disable the virus detection option, everything that could make problems ... but no success. I also tried a second Win98 installation, with DX 8.1 installed before the drivers but still the same problem.
    My system is AMD XP 2100 with Asus A7V333 motherboard - 300W for power, is the problem caused by some VIA chips ? I tried with their 4-1 drivers and stuff on the CD but it really doesn't want to work.
    Please help...

    after searching a bit on the forum, I found a thread where someone pointed out a problem caused by memory, greets to him.  I have 1 gb of ram and I added these lines to my system.ini :
    [vcache]
    MinFileCache=65536
    MaxFileCache=131072
    ChunkSize=2048
    NameCache=4096
    DirectoryCache=96
    ConservativeSwapFileUsage=1
    Values may change with more/less memory...And now it works perfectly in Win98.

Maybe you are looking for