Gf4 Ti4200 VTD 8x macro or not?

hi there i have one question
is in gf4 Ti4200 VTD 8x /MS-8894/ implemented macrovision in tv-out? ?(

Yes it has macrovision enabled as noted in the user's guide. What you get is a large white box covering most of the video image. Switching to an older capture driver (v1.08 gets rid of the box for me but introduces a mostly out of sync video (still unwatchable). This might be fixed with the use os some sort of amplifier bewteen the player and the video card.
Tom

Similar Messages

Problem w/GF4 Ti4200 vtd-8x

I had problems with my new MSI GF4 Ti4200 vtd-8x 128mb running on a 648 Max mobo. The mobo supports agp 8x but both riva tuner and display properties showed it running on agp 4x. I would really appreciate any help I can get.

Try updating both mobo and VGA card drivers.
Do clean un-installation before installing new VGA driver...
All the Best... :D !!!

Does exist the MSI GF4 TI4200 VTP8X?

Hello, I live in Spain and I go to adquire a MSI graphics card. I'll buy a GF4 TI4200 VTP 8X, but I think that model doesn't exist because in the oficcial page not appear, only appears the TD 8X and the VTD 8X models. But in http://www.alternate.net that model exist! What happen? Exist or not exist?
Thank you very much !!!
P.D. Sorry for my English, it isn't very well

I had the same problem with my MSI G4 Ti4200-VTD8X.
I did the same manual loading of the capture program. Didn't work. Look in control panel under your hardware and see if there is a yellow "!" next to the part that mentions "capture." Every time that was there the in didn't work.
I would uninstall and try it again.
Sometimes it would work for the day. I would even shut the computer off and when I would turn it back on, it would still work. Shut it off for the night and the next day it wouldn't work again! Go figure!!! Do a restore to the point where I shut the computer off for the night, and it still wouldn't work.
I believe it worked for good when I loaded the 4072 drivers. I did not install the manual program (I think - I did so many un/installs I can't be sure). Now the funny thing, those other little installs are not in my harware. But it works. I can't explain this.
Basically, uninstall the whole card driver , not just the capture. Reinstall the card driver without that other manual capture program. Just keep trying installing and uninstalling and checking out WinProducer to see if the capture option is there. If it still doesn't, try the manual capture program. Just keep trying different combinations.
Sorry that this isn't more of a step by step, but it worked for me. Hopefully MSI will put out another driver soon that will fix this once and for all.
Tom

Nvidia GF4 Ti4200 Driver problems!!!

I have built up a new system with the following:
MSI K7N2G-ILSR
nVIDIA GF4 Ti4200 128mb DDR
AMD XP2400+
512MB 333 DDR
PSU 350W
WD 80GB Caviar (partitioned)
Thermaltake Volcano 9 HSF
I have installed XP-PRO (+SP1). The problem I have is the drivers. First off I install the nFORCE 2 platform drivers - Fine, then I install the VGA Driver disc 40.72's. According to the installation, all is fine. When the system reboots, we have a no go (blank screen). I then need to go back to last known settings....yeah, yeah!
So far I have downloaded nearly all the drivers off the Nvidia site as well, using my other PC. (1MB CABLE). Each one cause pretty much the same problem, including all the WHQL versions.
I even downloaded the Nvidia nFORCE 2 platform package, which included a VGA driver. This still caused the same result.
My next step was to swap over with my other PC. Once I inserted a GeForce2 64MB DDR PRO/GTS, all appears fine, the drivers install...no problem.
I insert the GF4 Ti4200 into my ECS K7S5A, and low and behold all is fine here.....drivers, no problems.
Any idea's......anyone??????
Like compatibility problem or what..... I'm totally lost and confused now!!
MARKONE.

No, Markone from UK, novice PC builder..... :D
Borgstif:
"uninstall the driver in safe mode and the Reg entry in WinXp "
Explain exactly what you mean, I can choose start up in safe mode yes, but what will that do for me??
gfilitti:
Not sure exactly what specs you want? this is my first build ever. The PSU is a bog standard fitment inside an ATX Case, not a separate fitment. Can you be more specific about "timing etc..."
The Ti4200 is working fine in my less advanced ECS K7S5A machine......with 300W PSU.
And likewise the Nforce 2 machine operates my Geforce 2 GTS/PRO also with no problems.
Markone.

Slow gf4 Ti4200

I'm having a problem with my gf4 Ti4200. It runs at slow framerates even at lower resolution and graphics during games. Ive tested with Nightfire and UT2003 and my friends PC with gf2 runs better. Its in 4x mode and ive been told about dma. whats dma?
Are there any other suggestions anyone has that may increase my gf4's performance?
AMD AthlonXP 2100+
256mb DDR
GF4 Ti4200 128mb 4x
KT4V-L(MS-6712)
Sonic explosion soundcard
300W PSU

Im beginning to lose my patience with this machine. Im not very technical with a computer so i really need your help. Ive managed to pin point the problem with 3Dmark2001. The highpolygon test with 8 lights shows the same problem i have with direct3D games, a very stunted (unsmooth) movement and i get 9.0Mtriangles/sec (Not sure if thats good or bad).
Ive looked at other threads, and one struck me as odd about installing a new mouse seemed to interfer with the video card. The link is here and its the third post down:
http://www.msi.com.tw/program/e_service/...10433boardid=9
It sounded like he was having the same problem as me, and i have recently installed a new mouse and keyboard but hadn't registered that this could be a problem.
I was hoping i had an incorrect direct3D setting or something to do wiht multilights or multipolygons. Opengl works fine, its just the direct3D. Im struggling here. Can someone please help me.
Ginster

MSI GF4 Ti4200 VTD8X tech question

Hi everyone, I hope u can help me with this:
I'm planning on buying a MSI GF4 Ti4200 VTD8X (Video In) from the United States which uses the NTSC system for Video, however where I live we use the PAL system for Video. So my question is will I be able to use the Video In feature of the card ?( ?? Do these cards work using both video systems or are there different video versions of the card?
Thanks in advance!

bondock,
It is my understanding that they will work with both systems. They do not make them market specific.
Take Care,
Richard

GF4 TI4200 BSOD Dilemma - Please help!

Greetings gurus and fellow frustrated gamers. I purchased MSI's GF4 TI4200 about a year ago and have been putting up with a problem I thought was related to other components for a long time. Every single 3D graphics game I play in windows XP will eventually and utterly crash with a Blue Screen of Death (BSOD) which relates always to the nv4_dsp.dll file which is Nvidia's driver. I have tried 12 drivers...MSI/NVidia/experimental with no change. With help from the folks on the forum I replaced the PSU with an Antec 400w with no change. I have tried my old Geforce2 MX400 with the same problem. I have reformatted the computer 8 times and removed every single additional component except what was required to test my problem. I just purchased Star Wars Galaxies and am now crashing 8-15 times a day. I generally go 20-30 minutes between crashes. This is no longer acceptable. I have received this crash on Warcraft III, WC3:TFT, Neverwinter Nights, SWG, Black & White, and many more.
I have found through search engines that this has something to do with some Windows XP systems and Nvidia drivers and is an issue that does not have a fix. I am hoping that you can offer something that I can do to fix this problem.
Before you ask...this has nothing to do with any other component in my computer. It is not heat, the psu, the motherboard, the memory, the hard drives, etc. I have replaced every single piece in this computer and it still occurs. Check out this link for an example of someone else with the same problem: Similar Problem or use a search engine and type: nv4 blue screen. You will see what I mean...this is happening to tons of people.
My question: Is there a fix?
Any help is most appreciated. If there is not a fix, ATI is my only direction I can take.

Richard,
Well you are right about it not using IRQ 5, however, it is not conflicting with any other IRQ that I can see. The view under resources by connection reads:
(ISA) 0 System Timer
(ISA) 3 Communications Port(COM2)
(ISA) 4 Communications Port(COM1)
(ISA) 6 Standard floppy disk controller
(ISA) 8 System CMOS/real time clock
(ISA)11 Microsoft ACPI-Compliant System
(ISA)13 Numeric data processor
(ISA)14 Primary IDE Channel
(ISA)15 Secondary IDE Channel
(PCI) 5 VIA Rev 5 or later USB Universal Host Controller
(PCI) 5 VIA Rev 5 or later USB Universal Host Controller
(PCI)16 NVIDIA GeForce4 Ti 4200
(PCI)17 Texas Instruments OHCI Compliant IEEE 1394 Host Controller
(PCI)18 Wireless-G PCI Adapter
(PCI)19 Creative SB Live! Series (WDM)
Please advise. Thank you for the response.
Jeremy

Msi gf4 ti4200 td64

For starter, sorry about my bad English !
Sys Specs:
Amd Athlon 900 (o/c 945)
320 MB ram
MSI K7T Turbo 2
MSI gf4 ti4200 td64 64mb
Last week I bought my video card. I didn't have problems until few days ago. Mouse movement in Win XP is choppy, not all the time. I played with sample rate but that didn't help.I tried my old gf2 mx400, and i didn"t have problems. I was reading threads and I realized that the problem may be in power supply. It's a bit old (about 2 years :-) ), iam not sure is it good if it is warm . This problem occurd just after the problem with HD (detection problems, messed HD name..), i checked IDE cable, it's good. 3d expirience is not shownig voltages and temepatures. Fuzzy logic 3 somtimes alerts that the temperature in chassis is 131C!! which is impossible. I sens lack of fps in games.
Please help!

Leadman Electronics Model LP-6100
+3.3V +5V +12V -5V
235W 10A 20A 10A 0.1A
*250W 10A 25A 10A 0.1A
300W 10A 30A 12A 0.1A
400W 10A 40A 16A 0.1A

640x480 and above, capture with MSI GF4 Ti4200 VTP

could anyone successfully perform this operation ?
The weird thing is that if I set a capture of something like 5 fps in VirtualDub and 640x480 (I tried with several codecs and thought that decreasing the fps would improve the bandwidth usage), it still doesn't want to capture anything -> 0 frames. The maximum I can get (15% frames lost) is 320x200 at 30 fps. I tried to capture directly to memory as it's supposed to be very fast, no luck.
Maybe my system is not monster enough, don't know.... ?( Or could that be the card which is limited for this ?
MSI GF4 Ti4200 VTP - 1 gig RAM (DDR 333), Athlon XP 2100, IBM ICL35 120 GB - OS : W2K.
WDM 1.16 from MSI-CD. I tried with WDM 1.08 too.

your system is fine for this kind of job....
i have no problem in capturing full pal (768x...) in 30 fps (using included wincoder and mpeg1 or mpeg2 codecs) 60% cpu load on duron @1380
virtual bud will need somethong better then 1,3gh duron but i got no problems with 640x480 divx pro 5.02 25fps on my current sysetm (but the cpu load is high 75-90%) (0% frame lost)
some motion codecs (mjpg) will need both fast cpu and fast hdd....
uncompresed will produce so much data that even very fast hdd's will by to slow
but it is in fact weird 15% frame lost on 320x200 is much to high.. what board are u using?? are the latest 4in1 drivers instaled (very important for w2k) by shure that agpx4 and bus mastering are on... are u using any other extensin cards (tv tuner, off board sound, ide, lan??) if yes try removing them

Ti4200 VTD 8x (MS-8894) Fan dead

Hi,
The fan on my graphic card doesn't spin anymore unless I push it a bit, it'll run for a few minutes and then stops so it needs to be fixed (temperature around 72 C).
The manufacturing date is feb 2003 so it should still be under warranty I think (but not sure)
I guess I could RMA the card but I feel a bit insecure about this, never done this before and don't really know how to proceed. Any recommandation of wich delivery service I should use?
Or if I could simply get another fan to change it myself it would great (as long as I have instructions on how to disassemble the card and what kind of thermal coupound it takes to put it back in one pieces) but I don't know if it's possible to just get another fan.
Also I was wondering if anyone know a way that I could boot my computer without the graphic card seems the bios wont let the boot process complete if I don't have a video card plugged in. I don't have any other card I can put in there... and I need to be able to access my computer at least trough the network (Netbios + vnc is all I need for now)... I wondered if any key combination while booting could bypass this (I have an MSI-KT3Ultra2 motherboard (MS-6380E)
Any help would be really appreciated
Thank you very much!
Have a nice day

I think TT GIANT 2 is too big probably wont fit correctly in my case and I checked Antec website for the Vantec CCB-A1A but it doesn't says it is recommended for GF4-Ti4200 (mostly GF3 and GF4mx) , but If you say it's ok I'll believe you and try to search for it (a working fan is much better than no fan at all)
I've looked around the web site of shops near me and I found that this is the only product available
Thermal Take Cooler GF4 Highest Perf. [A1349] (19$ can)
http://www.thermaltake.com/coolers/chipset/a1394.htm
Is this good enough or I should still search for one of the products you suggested (antec fan seems great since I won't have to mess around too much with the heatsinks)
If not I could always try to special order one of the antec fan or order it online if you know any site that have the Vantec fan and that can ship to Canada it would be appreciated. Do you have any advice of what kind of thermal paste to use when reassembling the card?
Thanks a lot your help is really appreciated

GF4 Ti4200-VTD8X(8894) and Live update 2.0

Hello all
Recendly i bought this graphic card (i mention on the subject). It's much faster than the Asus GF2 Ti i had before and all are working properly except of the updating program called Live update 2.0. I installed it and when i got connected to the server it announced me that the version running on the server is newer than mine and it gave me the option to update it as i did. When i reconnected to the server and asked for updates about my card's bios or driver it gives me the message that my graphic card isn't from MSI. The utility option works fine but as you can understand isn't the important one. As i was ecpecting the same results i got from the live monitor too.
So i would like to ask the moderators of this forum or anyone who could know:
1) Is my graphic card [MSI GF4Ti 4200 VTD8X (8894) 128 MB] combatible with the Live update utility 2.0 or not? The 3D turbo experience utility works fine on my pc.
2)If i update the VGA bios and driver of my graphic card manualy (without the live update utility) from the MSI web site will i still have the tabs "MSI information" and "MSI clock" on my display properties?
Thanks in advance
Morte

I recently built a system (specs below) and installed this card (MSI GF4 Ti4200 VTD8X MS8894, 128MB DDR), and when I try to use Live Update 2 (version 3.33.000, from the CD that came with the card), I get the same message:
"Warning!!! Your Display Card does not support MSI Live Update 2 function. Note: MSI Live Update 2 supports the Display Cards of MSI only."
I'm using the drivers/BIOS that came on the CD: Driver version 6.13.10.4107, BIOS version 4.28.20.05.11. I see on the nVidia site that they have the 4109 drivers out now, should I try those? ?(
I have also made sure to do the suggested modifications to IE (and I don't have PC-cillin installed):
"Note: In order to operate this application properly, please note the following suggests.
-Set the IE security setting 'Download signed ActiveX controls' to [Enable] or [Prompt]. (System default is [Prompt]).
-Disable 'WebTrap' of PC-cillin(R) or any web based anti-virus application when executing MSITM Live Update 2TM.
-Update Microsoft® Windows® Installer"
I downloaded a newer version of LIveUpdate (3.35.000), and installed it (after completely uninstalling the old version), and got the same results. Nothing on my system is currently overclocked.
Help!
System specs:
-Soyo SY-KT400 DRAGON Ultra (Platinum Edition) with latest BIOS & Chipset Drivers
-AMD Athlon XP Thoroughbred 2100+
-MSI GF4 Ti4200 VTD8X (MS-8894)
-WD Caviar Special Edition 80 GB HDD, 8 MB Cache
-512 MB Crucial PC2700 DDR (one stick, in DIMM #1)
-TDK 40/12/48 CD R/RW
-Daewoo 905DF Dynaflat 19" Monitor
-Windows XP Home Edition, SP1/all other updates current
-On-Board CMedia 6-channel audio
-On-Board VIA 10/100 Ethernet
-Altec-Lansing ATP3 Speakers

GF4 Ti4200/Vivo - Video capture pauses

Hi All,
Did a search and could not find anything on this topic.
When capturing video from S-Video input, the video is not smooth. Getting momentary 'pauses' that leads to very jerky video on playback. I've checked the 'smooth video' option, but to no avail.
System specs:
MSI (oem'd Medion) MS-8889 GF4 TI4200 128MB Video card
P4 2.66 CPU
768M PC2700 DDR
120GB Seagate Barracuda 7200RPM ATA133
Original Shipped drivers for Video and WDM Capture (30.30 Video and 1.1 WDM)
Any help would be appreciated.
TIA,
SteveK

Well, I tried capturing with Virtualdub and it works much better (no pauses or stutters). But there is a fairly large number of dropped frames (about 20% dropped).
I've taken all of the standard steps to avoid dropped frames....no network access (no netowrk plugged in), no TSRs running, no antivirus, running with DMA enabled, hard disk is de-fragged (although I am running with a single hdd partitioned into 3 logical drives. CPU is a P4-2.66Mhz, so there's plenty of horsepower. The video card is an MSI-8889 (GF4 TI4200 8x w/128MB) ViVo. O/S is XP. Mobo is an MSI-6701 (SiS Chipset).
I believe the Vivo is stricly software capture, so the results are directly related to the software used for capture.
Can anyone recommend (or use) another capture product for this type of card (with good results)?
TIA,
SteveK

GF4 Ti4200-VTD64 Video-Out/In?

I was wondering if the TV-Out socket on my GF4 Ti4200-VTD64 could be used as a Video-In socket. I am going to be in college, so I won't have a TV and a DVD player, but I will have my Playstation2. I was wondering if I could connect that to my TV-Out socket and use my monitor as a 'TV'. What software would I need to do this, if possible?

himenohogosha,
I do not heard of anyone being able to do that. You would need to have circuitry on the Video Card to do that which to my knowledge is not here.
Take Care,
Richard

Ti4200-vtd 8x 128MB only 32MB????

I just purchased the 128MB version of the ti4200 vtd-8x. However my problem is this-- I right click on the desktop- click properties- click on MSI Information Tab and Memory : 32MB / Memory Type : SDRAM
The Card is 128MB DDR! What is causing this problem? Anyone else notice this? Please advise... Thanks!

CaLowrider,
Older Drivers on some CDs will read 32Mb when you have 128Mb. The drivers do not hurt anything, they just read as 32Mb but you still get the full use of the 128Mb.
Take Care,
Richard

Gf4 Ti4200 VTD 8x macro or not?

Similar Messages

Maybe you are looking for