GF4 Ti4200 won't overclock?

Hey guys,
This isn't so much a problem, more of a query. I just purchased an MSI Geforce4 Ti4200 128mb DDR and overall am very happy with it. Although whenever I attempt to take the core clock speed or the memory clock speed up (either using the advanced display properties or the MSI 3D! Turbo Experience) and reboot, the changes have never taken effect. They seem to just default back to the most stable settings (464/250). I know this card can go to 'at least' 510/270 but no matter wot I do it won't let me :-(
Anyway hope someone can help me out. There's no hurry mind, the default settings are running everything fine atm :-)
Cheers ppl

MEMORY  
128MB high-speed 128-bit DDR (Double Data Rate)
10.4 GB/sec Memory Bandwidth, 444MHz Memory Clock Rate.
CHIPSET  256-bit nVIDIA GeForce4 Ti 4400 GPU
RAMDAC  350 MHz, 250MHz Core Clock
I could be wrong here but the 64MB version has the 500mhz memory clock rate.
Below is a link to support the statement.
http://www.tech-report.com/reviews/2002q2/geforce4-ti4200/index.x?pg=2
You are in fact OVERCLOCKED by 2mhz!
Dennis B beat me too it while I was composing.... :D

Similar Messages

  • GF4 Ti4200 won\'t play dvd

    I had an older nVidia card and a seperate dvd decoder card in my Dell and upgraded to the GF4 Ti 4200 which supposedly doesn't need a seperate dvd card. When I put a dvd in the drive a message said my drive wasn't configured properly and that  I need a decoder card or decoder software. What's wrong? Didn't the necessary software download when I installed the software for my card?
    Mark

    http://www.msi.com.tw/program/products/vga/vga/pro_vga_list.php?kind=2&CHIP=27&NAME=GeForce%204%20Series
    every 4200 on that page comes with msi dvd
    but you do have to install it

  • GF4 Ti4200-VTD8X(8894) and Live update 2.0

    Hello all
    Recendly i bought this graphic card (i mention on the subject). It's much faster than the Asus GF2 Ti i had before and all are working properly except of the updating program called Live update 2.0. I installed it and when i got connected to the server it announced me that the version running on the server is newer than mine and it gave me the option to update it as i did. When i reconnected to the server and asked for updates about my card's bios or driver it gives me the message that my graphic card isn't from MSI. The utility option works fine but as you can understand isn't the important one. As i was ecpecting the same results i got from the live monitor too.
    So i would like to ask the moderators of this forum or anyone who could know:
    1) Is my graphic card [MSI GF4Ti 4200 VTD8X (8894) 128 MB] combatible with the Live update utility 2.0 or not? The 3D turbo experience utility works fine on my pc.
    2)If i update the VGA bios and driver of my graphic card manualy (without the live update utility) from the MSI web site will i still have the tabs "MSI information" and "MSI clock" on my display properties?
    Thanks in advance
    Morte  

    I recently built a system (specs below) and installed this card (MSI GF4 Ti4200 VTD8X MS8894, 128MB DDR), and when I try to use Live Update 2 (version 3.33.000, from the CD that came with the card), I get the same message:
    "Warning!!! Your Display Card does not support MSI Live Update 2 function.  Note: MSI Live Update 2 supports the Display Cards of MSI only."
    I'm using the drivers/BIOS that came on the CD: Driver version 6.13.10.4107, BIOS version 4.28.20.05.11.  I see on the nVidia site that they have the 4109 drivers out now, should I try those?  ?(
    I have also made sure to do the suggested modifications to IE (and I don't have PC-cillin installed):
    "Note: In order to operate this application properly, please note the following suggests.
    -Set the IE security setting 'Download signed ActiveX controls' to [Enable] or [Prompt]. (System default is [Prompt]).
    -Disable 'WebTrap' of PC-cillin(R) or any web based anti-virus application when executing MSITM Live Update 2TM.
    -Update Microsoft® Windows® Installer"
    I downloaded a newer version of LIveUpdate (3.35.000), and installed it (after completely uninstalling the old version), and got the same results.  Nothing on my system is currently overclocked.
    Help!
    System specs:
    -Soyo SY-KT400 DRAGON Ultra (Platinum Edition) with latest BIOS & Chipset Drivers
    -AMD Athlon XP Thoroughbred 2100+
    -MSI GF4 Ti4200 VTD8X (MS-8894)
    -WD Caviar Special Edition 80 GB HDD, 8 MB Cache
    -512 MB Crucial PC2700 DDR (one stick, in DIMM #1)
    -TDK 40/12/48 CD R/RW
    -Daewoo 905DF Dynaflat 19" Monitor
    -Windows XP Home Edition, SP1/all other updates current
    -On-Board CMedia 6-channel audio
    -On-Board VIA 10/100 Ethernet
    -Altec-Lansing ATP3 Speakers

  • GF4 Ti4200-VTD64 Video-Out/In?

    I was wondering if the TV-Out socket on my GF4 Ti4200-VTD64 could be used as a Video-In socket. I am going to be in college, so I won't have a TV and a DVD player, but I will have my Playstation2. I was wondering if I could connect that to my TV-Out socket and use my monitor as a 'TV'. What software would I need to do this, if possible?

    himenohogosha,
    I do not heard of anyone being able to do that.  You would need to have circuitry on the Video Card to do that which to my knowledge is not here.
    Take Care,
    Richard

  • Nvidia GF4 Ti4200 Driver problems!!!

    I have built up a new system with the following:
    MSI K7N2G-ILSR
    nVIDIA GF4 Ti4200 128mb DDR
    AMD XP2400+
    512MB 333 DDR
    PSU 350W
    WD 80GB Caviar (partitioned)
    Thermaltake Volcano 9 HSF
    I have installed XP-PRO (+SP1). The problem I have is the drivers.  First off I install the nFORCE 2 platform drivers - Fine, then I install the VGA Driver disc 40.72's. According to the installation, all is fine.  When the system reboots, we have a no go (blank screen). I then need to go back to last known settings....yeah, yeah!
    So far I have downloaded nearly all the drivers off the Nvidia site as well, using my other PC. (1MB CABLE).  Each one cause pretty much the same problem, including all the WHQL versions.
    I even downloaded the Nvidia nFORCE 2 platform package, which included a VGA driver.  This still caused the same result.
    My next step was to swap over with my other PC.  Once I inserted a GeForce2 64MB DDR PRO/GTS, all appears fine, the drivers install...no problem.
    I insert the GF4 Ti4200 into my ECS K7S5A, and low and behold all is fine here.....drivers, no problems.
    Any idea's......anyone??????
    Like compatibility problem or what..... I'm totally lost and confused now!!
    MARKONE.

    No, Markone from UK, novice PC builder..... :D
    Borgstif:  
    "uninstall the driver in safe mode and the Reg entry in WinXp "
    Explain exactly what you mean, I can choose start up in safe mode yes, but what will that do for me??
    gfilitti:  
    Not sure exactly what specs you want? this is my first build ever.  The PSU is a bog standard fitment inside an ATX Case, not a separate fitment.  Can you be more specific about "timing etc..."
    The Ti4200 is working fine in my less advanced ECS K7S5A machine......with 300W PSU.
    And likewise the Nforce 2 machine operates my Geforce 2 GTS/PRO also with no problems.
    Markone.

  • Slow gf4 Ti4200

    I'm having a problem with my gf4 Ti4200. It runs at slow framerates even at lower resolution and graphics during games. Ive tested with Nightfire and UT2003 and my friends PC with gf2 runs better. Its in 4x mode and ive been told about dma. whats dma?
    Are there any other suggestions anyone has that may increase my gf4's performance?
    AMD AthlonXP 2100+
    256mb DDR
    GF4 Ti4200 128mb 4x
    KT4V-L(MS-6712)
    Sonic explosion soundcard
    300W PSU

    Im beginning to lose my patience with this machine. Im not very technical with a computer so i really need your help. Ive managed to pin point the problem with 3Dmark2001. The highpolygon test with 8 lights shows the same problem i have with direct3D games, a very stunted (unsmooth) movement and i get 9.0Mtriangles/sec (Not sure if thats good or bad).
    Ive looked at other threads, and one struck me as odd about installing a new mouse seemed to interfer with the video card. The link is here and its the third post down:
    http://www.msi.com.tw/program/e_service/...10433boardid=9
    It sounded like he was having the same problem as me, and i have recently installed a new mouse and keyboard but hadn't registered that this could be a problem.
    I was hoping i had an incorrect direct3D setting or something to do wiht multilights or multipolygons. Opengl works fine, its just the direct3D. Im struggling here. Can someone please help me.
    Ginster

  • Problem w/GF4 Ti4200 vtd-8x

    I had problems with my new MSI GF4 Ti4200 vtd-8x 128mb running on a 648 Max mobo. The mobo supports agp 8x but both riva tuner and display properties showed it running on agp 4x. I would really appreciate any help I can get.

    Try updating both mobo and VGA card drivers.
    Do clean un-installation before installing new VGA driver...
    All the Best...  :D !!!

  • Help with GF4 Ti4200 128mb DDR AGP8X VITO

    i need help with this card.
    when i play most of my games, the fonts will appear blur. and also sometimes some textures will appear jumbled up or distorted.
    can anyone help me with this particular problem? Also, how do i check if my comp is running @ 533mhz FSb and 33mhz for the RAM? is it advisable to do so ?
    my comp stats is :
    P4 2.4ghz(FSB 533)
    MSI 648 Max (SIS 648) AGP8x+DDR400+ATA-133
    Kingston 512mb DDR 333
    GF4 Ti4200 128mb DDR AGP8X VITO
    Creative SB Audigy

    well i'm new at this but here goes...
    FREQ / VOLT Control
    cpu/dram   -   by SPD
    dram freq   -   167mhz
    auto detect cpu fsb   -   enable
    cpu freq   -   133mhz
    agp/pci freq(mhz)   -   66/33
    cpu multiple fac   -   locked
    dram Vcore adjust   -   2.6v
    cpu Vcore adjust   -   auto
    PC Health
    Vcore   -   1.456-1.472 V
    +3.3V   -   2.944
    +5.0V   -   4.999
    +12V   -   11.876
    -12   -   -11.672
    -5   -   -5.178
    Batt Voltage   -   3.056V
    Advance Chipset Features
    AGP Aperture Size   -   64M
    should i change this to 128M since my graphic card is 128mb ?

  • Z87-GD65 won't Overclock

    Got My Z87-GD65 back from RMA.When i try to set my 4770k to 4.2ghz in bios its reverts to 39 only.I have flash to latest bios and still same thing.It wont let me overclock at all.I switched to bios B,and still locked at 3.9ghz.Even OC Genie won't overclock it.Did i get a worst board than the one i RMA'd.The one i sent in had a bricked bios A,but B still worked.Even my ram i set the xmp profile to 2400,but only does 1600.

    Quote from: Nichrome on 07-September-14, 04:22:25
    GSkill oh dear.
    Use 1 RAM stick with GPUs of your choice. I am not just sure if 295X2 should be mixed with 290x.
    About GSkill:  https://forum-en.msi.com/index.php?topic=178019.msg1286022#msg1286022  worth reading before frustrating 
    Thanks I will give it a try......as for mixing cards here is a mouthwatering score http://www.3dmark.com/fs/2398042

  • GF4 Ti4200 and Win98 - HELP ! serious problem with drivers !

    Ok, I could successfully install the MSI GF4 Ti4200 128 in Windows 2000, no problem there, everything is working.
    I then installed Win98 as a second OS, I launch the drivers setup (from MSI CD) and I reboot as wanted by the setup. The PC reboots, the Win98 screen appears and suddenly...it reboots by itself, no message, no black screen.  I tried with other driver versions from NVidia and this time, I get a freezed black screen after the Win98 screen, I must press reset.  I had to enter the safe-mode to remove the drivers and get the usual 640x480 in 16 colors.
    What's going on ? I tried to change my bios parameters, disable the virus detection option, everything that could make problems ... but no success. I also tried a second Win98 installation, with DX 8.1 installed before the drivers but still the same problem.
    My system is AMD XP 2100 with Asus A7V333 motherboard - 300W for power, is the problem caused by some VIA chips ? I tried with their 4-1 drivers and stuff on the CD but it really doesn't want to work.
    Please help...

    after searching a bit on the forum, I found a thread where someone pointed out a problem caused by memory, greets to him.  I have 1 gb of ram and I added these lines to my system.ini :
    [vcache]
    MinFileCache=65536
    MaxFileCache=131072
    ChunkSize=2048
    NameCache=4096
    DirectoryCache=96
    ConservativeSwapFileUsage=1
    Values may change with more/less memory...And now it works perfectly in Win98.

  • GF4 ti4200 and capturing DV

    I just got my GF4 Ti4200 8x yesterday and have had great success with everything except capturing digital video via my 1394 firewire card.  Previous the GF4, I had a GF2 ti that was able to capture video perfectly, but ever since I installed the GF4 I cannot capture video via the firewire controller, only the video in port on the card.  However I've noticed something interesting that makes me want to think it has something to do with the card:  I installed the Intervideo WinProducer that came with my card and it can capture digital video via the 1394 card without crashing like Premiere and the software that came with my camcorder; however when I try to play back the video it gives me that ugly blocky video with the logo and the scrolling subtitles that say my trial has expired  ?(  how can it be expired if I just bought it and entered the key on the cd?  Anyways, thanks for any help.

    You have 2 capture sources, you need the software to be able to allow you to select the one you want.
    You should try virtualdub, supposed to be good and it's free.

  • MSI GF4 Ti4200 VTD8X tech question

    Hi everyone, I hope u can help me with this:
    I'm planning on buying a MSI GF4 Ti4200 VTD8X (Video In) from the United States which uses the NTSC system for Video, however where I live we use the PAL system for Video. So my question is will I be able to use the Video In feature of the card ?( ?? Do these cards work using both video systems or are there different video versions of the card?
    Thanks in advance!

    bondock,
    It is my understanding that they will work with both systems. They do not make them market specific.
    Take Care,
    Richard

  • MSI GT70 0ND CPU won't overclock

    hello
    simply when i press the turbo button on my MSI GT70 0ND , the cpu won't overclock to 3.1 ghz and stay at 2.4 ghz.
    and the power button is always orange as soon as i log into windows
    my OS is windows 8.
    BTW i Downgraded from 8.1
    installed scm , intel and geforce drivers
    installed all windows updates.
    please help.
    1 more thing how can i know my current cpu speed?( i do that by right click on MY COMPUTER icon and chose properties)

    ok. now i used cpuiz and it shows taht my cpu is always running on turbo( even without turbo on) and showing the following
    Processor 1         ID = 0
       Number of cores      4 (max 8)
       Number of threads   8 (max 16)
       Name         Intel Core i7 3630QM
       Codename      Ivy Bridge
       Specification      Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz
       Package (platform ID)   Socket 988B rPGA (0x4)
       CPUID         6.A.9
       Extended CPUID      6.3A
       Core Stepping      E1/L1
       Technology      22 nm
       TDP Limit      45.0 Watts
       Tjmax         105.0 °C
       Core Speed      3192.4 MHz
       Multiplier x Bus Speed   32.0 x 99.8 MHz
       Stock frequency      2400 MHz
       Instructions sets   MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T, VT-x, AES, AVX
       L1 Data cache      4 x 32 KBytes, 8-way set associative, 64-byte line size
       L1 Instruction cache   4 x 32 KBytes, 8-way set associative, 64-byte line size
       L2 cache      4 x 256 KBytes, 8-way set associative, 64-byte line size
       L3 cache      6 MBytes, 12-way set associative, 64-byte line size
       FID/VID Control      yes
       Turbo Mode      supported, enabled
       Max non-turbo ratio   24x
       Max turbo ratio      34x
       Max efficiency ratio   12x
       Min Power      36 Watts
       O/C bins      none
       Ratio 1 core      34x
       Ratio 2 cores      33x
       Ratio 3 cores      32x
       Ratio 4 cores      32x
       TSC         2395.0 MHz
       APERF         3392.2 MHz
       MPERF         2339.9 MHz
    ((((now i need help to disable the turbo mode when not needed.))))

  • GF4 TI4200 BSOD Dilemma - Please help!

    Greetings gurus and fellow frustrated gamers.  I purchased MSI's GF4 TI4200 about a year ago and have been putting up with a problem I thought was related to other components for a long time.  Every single 3D graphics game I play in windows XP will eventually and utterly crash with a Blue Screen of Death (BSOD) which relates always to the nv4_dsp.dll file which is Nvidia's driver.  I have tried 12 drivers...MSI/NVidia/experimental with no change.  With help from the folks on the forum I replaced the PSU with an Antec 400w with no change.  I have tried my old Geforce2 MX400 with the same problem.  I have reformatted the computer 8 times and removed every single additional component except what was required to test my problem.  I just purchased Star Wars Galaxies and am now crashing 8-15 times a day.  I generally go 20-30 minutes between crashes.  This is no longer acceptable.  I have received this crash on Warcraft III, WC3:TFT, Neverwinter Nights, SWG, Black & White, and many more.
    I have found through search engines that this has something to do with some Windows XP systems and Nvidia drivers and is an issue that does not have a fix.  I am hoping that you can offer something that I can do to fix this problem.
    Before you ask...this has nothing to do with any other component in my computer.  It is not heat, the psu, the motherboard, the memory, the hard drives, etc.  I have replaced every single piece in this computer and it still occurs.  Check out this link for an example of someone else with the same problem: Similar Problem or use a search engine and type: nv4 blue screen.  You will see what I mean...this is happening to tons of people.
    My question: Is there a fix?
    Any help is most appreciated.  If there is not a fix, ATI is my only direction I can take.

    Richard,
    Well you are right about it not using IRQ 5, however, it is not conflicting with any other IRQ that I can see.  The view under resources by connection reads:
    (ISA) 0 System Timer
    (ISA) 3 Communications Port(COM2)
    (ISA) 4 Communications Port(COM1)
    (ISA) 6 Standard floppy disk controller
    (ISA) 8 System CMOS/real time clock
    (ISA)11 Microsoft ACPI-Compliant System
    (ISA)13 Numeric data processor
    (ISA)14 Primary IDE Channel
    (ISA)15 Secondary IDE Channel
    (PCI) 5 VIA Rev 5 or later USB Universal Host Controller
    (PCI) 5 VIA Rev 5 or later USB Universal Host Controller
    (PCI)16 NVIDIA GeForce4 Ti 4200
    (PCI)17 Texas Instruments OHCI Compliant IEEE 1394 Host Controller
    (PCI)18 Wireless-G PCI Adapter
    (PCI)19 Creative SB Live! Series (WDM)
    Please advise.  Thank you for the response.
    Jeremy

  • Msi gf4 ti4200 td64

    For starter, sorry about my bad English !
    Sys Specs:
    Amd Athlon 900 (o/c 945)
    320 MB ram
    MSI K7T Turbo 2
    MSI gf4 ti4200 td64 64mb
    Last week I bought my video card. I didn't have problems until few days ago. Mouse movement in Win XP is choppy, not all the time. I played with sample rate but that didn't help.I tried my old gf2 mx400, and i didn"t have problems. I was reading threads and I realized that the problem may be in power supply. It's a bit old (about 2 years :-) ), iam not sure is it good if it is warm . This problem occurd just after the problem with HD (detection problems, messed HD name..), i checked IDE cable, it's good. 3d expirience is not shownig voltages and temepatures. Fuzzy logic 3 somtimes alerts that the temperature in chassis is 131C!! which is impossible. I sens lack of fps in games.
    Please help!  

    Leadman Electronics Model LP-6100
              +3.3V  +5V   +12V        -5V
      235W  10A    20A   10A          0.1A
    *250W  10A    25A   10A          0.1A
     300W  10A    30A   12A          0.1A
     400W  10A    40A   16A          0.1A

Maybe you are looking for

  • Problem with client import

    Do anyone now which Tcode is the picture? thanks

  • CSS 11501 web timeout

    Hi, I have a CSS11501 running 8.10.0.02 software. I have 2 windows 2003 web servers that connect to a backend database. I am recieving complaints that intermittently the end user is getting a session timeout. I set the flow multiple to 2700 so the fl

  • ORA-00600 Error Help required

    I am getting Error ORA-00600 for a procedure which tries get a CLOB as output paramater. It is a simple stored proc which is just querying to get this data. However it fails at times giving ORA-00600 error which we have no clue why it's happening. Th

  • How do I uninstall fancontrol?

    The folder isn't in applications and I removed it from system preferences but it won't let me drag the .dmg file to the trash because it says it is still in use. I tried to see if installing it again would remove the old one but the installer won't e

  • Cannot image more than one computer simulteneously

    When I try to image more than one computer simulteneously, the computer freezes. I have Zenworks for desktops Ver 6.5 and netware 6.5. Please help! Thanks, Mike